
What counts as a required practical
The practical begins with a question about what was changed, what was measured and what was kept constant. You also need to understand how the results support a conclusion. The exact list you must carry out belongs to your course, so use your own school or exam board specification for that list.
The site's Biology required-practical guide covers microscopy, culturing microorganisms, osmosis, food tests, amylase and pH, photosynthesis, reaction time, plant responses, quadrat and transect sampling, and decay. Its emphasis is not just naming an investigation: it shows how to identify variables, handle repeats and anomalies, calculate rates and write a conclusion that does not claim more than the data shows.
The site's Chemistry required-practical guide covers soluble salts, titration, electrolysis, temperature changes, rates, chromatography, water purification and identifying ions. The Physics required-practical guide covers thermal work, resistance and circuits, density, force and extension, acceleration, waves, light and infrared radiation, with particular attention to resolution and uncertainty. These are the practical areas covered by the site's guides, not a replacement for your own course list.
What a written question usually asks
Method questions test whether another person could repeat the investigation. Include the apparatus, quantities, range and interval of the variable, timing and measurement method. Saying 'do it more accurately' is too vague: a specific improvement names the change and the problem it fixes, such as using a gas syringe instead of counting bubbles or insulating a container to reduce heat loss.
Variable questions are often the quickest marks to secure. The independent variable is what you change, the dependent variable is what you measure and control variables are what you keep the same. A question may ask you to choose a control, explain why it matters or identify what has made a comparison unfair. In a results question, expect to spot an anomaly, calculate a mean or rate, choose a sensible graph and use figures from the data as evidence.
Risk and evaluation questions want a specific link between the hazard and the precaution. For example, falling masses need a way to reduce injury, a culture investigation needs appropriate aseptic practice, and a circuit or heating experiment needs a clear safety control. The answer should then judge the quality of the evidence: separate random error from systematic error, explain what repeats can improve, and say when a conclusion goes beyond the data. The GCSE Science topic guides provide the wider scientific explanations that make those evaluation points meaningful.
Worked written example: a hypothetical question supplies three oxygen bubble counts at each lamp distance, each count recorded over one minute: 20 cm, 18, 20 and 19 bubbles; 40 cm, 10, 11 and 9 bubbles; 60 cm, 7, 26 and 8 bubbles. Using all three original readings at each distance, the means are (18 + 20 + 19) / 3 = 19 bubbles/min at 20 cm, (10 + 11 + 9) / 3 = 10 bubbles/min at 40 cm, and (7 + 26 + 8) / 3 = 13.7 bubbles/min at 60 cm, rounded to 1 decimal place. These original means fall between 20 and 40 cm, then rise at 60 cm; they do not show a decrease at every distance. This is a written revision exercise using supplied results.
The 26-bubble reading is a suspected anomaly because it is far above the other two readings at 60 cm, not simply because it interrupts an expected trend. Keep it in the recorded results and explain the concern. In evaluating this written scenario, suggest checking the record and repeating that condition rather than silently excluding the reading. Suppose the question then supplies a separate set of three one-minute counts at 60 cm: 7, 8 and 7 bubbles. Their mean is (7 + 8 + 7) / 3 = 7.3 bubbles/min, rounded to 1 decimal place. This mean uses only the three new counts; it is reported separately and does not replace the original 60 cm mean of 13.7 bubbles/min. The new counts strengthen the reason to investigate 26, but do not establish that it was a recording or measurement error.
A supported conclusion distinguishes the two comparisons. The original means do not decrease consistently across all three distances. Comparing the original means at 20 and 40 cm with the separate repeat mean at 60 cm gives 19, 10 and 7.3 bubbles/min: this provisional comparison supports a pattern of fewer bubbles per minute at greater lamp distance, while the original 60 cm results remain unresolved. As the Biology practical data-analysis guide explains, bubble counts are a measure used to estimate photosynthesis rate, and bubbles can vary in size. The provisional pattern is consistent with lower light intensity being associated with a lower photosynthesis rate. It does not by itself establish that reduced light intensity caused the change: the supplied data do not say whether temperature and carbon dioxide concentration were controlled. A causal claim needs evidence about those controls as well as an explanation of the questioned reading.
How to revise without a laboratory
Start by making a one-page record for each practical with six headings: aim, variables, method, risks, results and evaluation. Cover the guide and reconstruct the method from memory. Then compare your version with the guide and add the missing quantities, controls, units or safety detail. This turns a practical from a story you remember vaguely into a method you can use in an exam.
Next, practise the data handling separately. Make sure you can identify an anomaly without silently deleting it, calculate a mean or rate with a unit, describe a trend using figures and explain why a repeat or a better-resolution instrument would help. You can do this on paper from the GCSE Science worksheets, even when you cannot repeat the apparatus at home.
Finish with short exam-style prompts rather than rereading the whole method. Ask yourself what you would change, what must stay constant, what could make the result too high or too low, and whether the conclusion is justified. The GCSE Science revision guide can help you fit practical work into a wider subject plan, while the printable GCSE Science worksheets guide suits a physical page for the questions.
Our own resource
Revision Library
Best for free printable practice with mark schemesFor practical-focused revision, Revision Library puts the material inside the wider GCSE Science library, with Biology, Chemistry and Physics practice kept together but still easy to approach by strand. That lets you revise a required practical and then test the surrounding science rather than memorising a method in isolation.
Open a guide such as Biology Required Practicals and Data Analysis, Chemistry Required Practicals and Data Analysis or Physics Required Practicals and Uncertainties before printing questions. The guides give the language behind the marks: variables, anomalies, rates, uncertainty, resolution and conclusions.
The neighbouring GCSE Combined Science explainer answers a different question about routes and subject coverage. This page is narrower: it explains how practical knowledge is assessed and how to revise it when you do not have laboratory equipment.
Browse GCSE Science practicalsIn the numbers
- packs
- 82
- question pages
- 1,072
GCSE Science printable practice packs for practical methods and data analysis
How to choose
Begin with your own course list, then use the site's Biology, Chemistry and Physics guides to learn the matching methods. Do not assume that a list from another student's school applies to your entry.
If method writing is the weakness, start with Chemistry practical methods and rewrite one investigation as numbered steps with quantities. If data is the weakness, use Physics practical uncertainty guidance and practise means, half-ranges, percentage uncertainty and graph gradients.
If you keep losing marks in conclusions, use Biology practical data analysis to practise the pattern, figures, explanation and evaluation sequence. Mark your answer by checking whether each part is present, rather than by judging whether it sounds scientific.
Keep practical revision connected to the main subject. A method about photosynthesis still needs the biology of limiting factors; a rate experiment still needs the chemistry or physics behind the measured change. The printable worksheet guide and GCSE Science revision guide cover those broader study choices.
Frequently asked questions
Are required practicals tested in the written GCSE Science exam?
Do I need to memorise every apparatus detail?
How can I revise required practicals at home?
What is the difference between a random and a systematic error?
Revision Library resources in this article
How we wrote this
Biology, Chemistry and Physics required-practical guides supply the coverage here, including their methods, worked examples, common mistakes and exam tips, alongside the site's wider science topic guidance. The article explains what those guides cover, while your own school and exam board remain the authority for the list and wording that apply to your course.