GCSE Statistics flashcards
Data collection, averages and spread, representation, probability and correlation. 72 cards across 6 topics, each with its answer.
Data Collection and Sampling
- 1
What is primary data?
Answer: Data collected directly by the researcher for their own investigation.
- 2
What is secondary data?
Answer: Data that already exists, collected by someone else for a different purpose.
- 3
What is the difference between qualitative and quantitative data?
Answer: Qualitative data is descriptive and non-numerical; quantitative data is numerical.
- 4
What is the difference between discrete and continuous data?
Answer: Discrete data can only take specific counted values; continuous data can take any value in a range and is measured.
Worked example: Number of pets owned is discrete; height in cm is continuous.
- 5
List the four stages of the statistical enquiry cycle.
Answer: Specify the problem and plan; collect the data; process and present the data; interpret and discuss the results.
- 6
What is systematic sampling?
Answer: Selecting every nth item from a list, after choosing a random starting point.
- 7
What is stratified sampling?
Answer: Dividing the population into groups (strata) and sampling from each group in proportion to its size.
Worked example: Number taken from a stratum = (size of stratum / total population size) x total sample size.
- 8
What is cluster sampling?
Answer: Dividing the population into clusters and then randomly selecting whole clusters to sample.
- 9
What is quota sampling?
Answer: A non-random method where an interviewer selects people to fill fixed quotas for different groups.
- 10
Why is a pilot survey carried out before the main survey?
Answer: To trial the questionnaire on a small group first, checking the questions are clear and unbiased and that the survey works.
- 11
In capture-recapture, how is the population size N estimated?
Answer: N = (first sample size x second sample size) / number recaptured that were marked.
Worked example: 50 fish are caught, marked and released. Later, 40 fish are caught and 8 are marked. N = (50 x 40) / 8 = 250.
Averages and Spread
- 1
How do you calculate the mean of a data set?
Answer: Add up all the values and divide by the number of values.
- 2
How do you find the median of an ordered data set with 15 values?
Answer: It is the 8th value.
Worked example: Median position = (n + 1) / 2 = (15 + 1) / 2 = 8.
- 3
How do you calculate the range of a data set?
Answer: The highest value minus the lowest value.
- 4
How do you estimate the mean from a grouped frequency table?
Answer: Multiply each class midpoint by its frequency, add these together, then divide by the total frequency.
- 5
How do you find the interquartile range (IQR)?
Answer: Upper quartile minus lower quartile.
- 6
How is the combined mean of two groups found?
Answer: Add the two group totals together and divide by the combined number of values.
Worked example: Group A: 10 values, mean 20, total 200. Group B: 5 values, mean 8, total 40. Combined mean = (200 + 40) / 15 = 16.
- 7
State a formula for the standard deviation of a data set.
Answer: sqrt( (sum of x squared) / n - mean squared ).
- 8
What does a small standard deviation tell you about a data set?
Answer: The values are close together and clustered near the mean, so there is less spread.
- 9
How is a standardised (z) score calculated?
Answer: z = (value - mean) / standard deviation.
- 10
What does a positive z-score tell you about a value?
Answer: The value is above the mean.
- 11
How is a weighted mean calculated?
Answer: Multiply each value by its weight, add the results together, then divide by the sum of the weights.
- 12
How is the geometric mean of n values calculated?
Answer: Multiply all n values together, then take the nth root of the product.
- 13
What does it mean if mean is greater than median is greater than mode for a data set?
Answer: The data is positively (right) skewed.
Representing Data
- 1
What must every pictogram include?
Answer: A key showing what one symbol represents.
- 2
How is the angle for one sector of a pie chart calculated?
Answer: (Frequency for that category / total frequency) x 360 degrees.
- 3
What must a stem and leaf diagram always include?
Answer: A key explaining how to read the values, with the leaves in each row written in ascending order.
- 4
How is frequency density calculated for a histogram?
Answer: Frequency density = frequency / class width.
- 5
Why do histograms have no gaps between the bars?
Answer: Because they represent continuous data, and it is the area of each bar, not its height, that represents frequency.
- 6
Where are the points plotted on a frequency polygon?
Answer: At the midpoint of each class interval, at a height equal to the frequency, then joined with straight lines.
- 7
At what point in each class is cumulative frequency plotted?
Answer: At the upper class boundary.
- 8
How do you estimate the median from a cumulative frequency graph?
Answer: Find n / 2 on the vertical axis, read across to the curve, then read down to the horizontal axis.
- 9
What five values are needed to draw a box plot?
Answer: The minimum, lower quartile, median, upper quartile and maximum.
- 10
How can a possible outlier be identified using the interquartile range?
Answer: A value more than 1.5 times the IQR below the lower quartile, or above the upper quartile.
- 11
What does a composite (stacked) bar chart show that a simple bar chart does not?
Answer: How each total is split into sub-categories, by dividing each bar into labelled sections.
- 12
What is a population pyramid used to show?
Answer: The age and sex structure of a population, drawn as two back-to-back bar charts.
- 13
What does a choropleth map use to represent data across regions?
Answer: Shading or colour intensity, with a key linking each shade to a range of values.
- 14
Give one way a graph can be drawn so that it misleads.
Answer: By starting the vertical axis at a value other than zero (a truncated axis), which exaggerates differences.
- 15
What does a Venn diagram show?
Answer: How sets of data overlap or relate, using overlapping circles inside a rectangle representing everything.
Probability
- 1
What are the two ends of the probability scale?
Answer: 0 (impossible) and 1 (certain).
- 2
How is the probability of an event calculated when outcomes are equally likely?
Answer: Number of favourable outcomes divided by the total number of possible outcomes.
- 3
What does it mean for two events to be mutually exclusive?
Answer: They cannot both happen at the same time.
- 4
For mutually exclusive events A and B, what is P(A or B)?
Answer: P(A) + P(B).
- 5
What is true of the probabilities of a set of events that are mutually exclusive and exhaustive?
Answer: They add up to 1.
- 6
How is relative frequency calculated?
Answer: Number of times the event occurs divided by the total number of trials.
- 7
How is expected frequency calculated?
Answer: Probability of the event multiplied by the number of trials.
- 8
On a probability tree diagram, how do you find the probability of one full branch?
Answer: Multiply the probabilities along that branch.
- 9
On a probability tree diagram, how do you combine two separate branches that lead to the same outcome?
Answer: Add the probabilities of the two branches together.
- 10
What is conditional probability?
Answer: The probability of an event occurring given that another event has already happened.
- 11
State the general addition law for two events A and B.
Answer: P(A or B) = P(A) + P(B) - P(A and B).
- 12
What shape is a normal distribution curve?
Answer: A symmetrical, bell-shaped curve, where the mean, median and mode are all equal.
- 13
What are the four conditions for a binomial distribution?
Answer: A fixed number of trials, two possible outcomes each time, a constant probability of success, and the trials are independent of each other.
Correlation and Time Series
- 1
What does positive correlation between two variables mean?
Answer: As one variable increases, the other also tends to increase.
- 2
What does negative correlation between two variables mean?
Answer: As one variable increases, the other tends to decrease.
- 3
Does correlation prove that one variable causes a change in another?
Answer: No, correlation does not imply causation.
- 4
What is the purpose of drawing a line of best fit on a scatter graph?
Answer: To show the trend in the data and to make predictions.
- 5
What is the difference between interpolation and extrapolation?
Answer: Interpolation predicts a value within the range of the data; extrapolation predicts a value outside that range, which is less reliable.
- 6
What range of values can the product moment correlation coefficient (PMCC) take?
Answer: From -1 to +1.
- 7
What does a PMCC of 0 indicate?
Answer: No linear correlation between the two variables.
- 8
What is Spearman's rank correlation coefficient used to measure?
Answer: The strength of correlation between two sets of ranked (ordinal) data.
- 9
What is a moving average used for in a time series?
Answer: To smooth out short-term fluctuations and reveal the underlying trend.
- 10
How is the seasonal variation found at a point in a time series?
Answer: Actual value minus the trend (moving average) value at that point, in an additive model.
- 11
In a regression line y = a + bx, what does b represent?
Answer: The gradient of the line: how much y changes for a one-unit increase in x.
Rates and Index Numbers
- 1
How is a crude rate calculated?
Answer: Number of events divided by the total population, usually multiplied by a constant such as 1000.
Worked example: Crude birth rate = (number of births / population) x 1000.
- 2
Why is a standardised rate used instead of a crude rate when comparing two populations?
Answer: It adjusts for a factor such as age structure, allowing a fairer comparison between the populations.
- 3
How is an index number calculated?
Answer: (Current value / base year value) x 100.
- 4
What value does the base year always take in an index numbers question?
Answer: 100.
- 5
What is the difference between a fixed base index and a chain base index?
Answer: A fixed base index always compares to one chosen base year; a chain base index compares each value only to the previous year.
- 6
What is a weighted index number used for?
Answer: Combining index numbers for several items into one overall figure, giving more important items a bigger weight.
- 7
What is the difference between quality control and quality assurance?
Answer: Quality control checks products after they are made; quality assurance monitors the process throughout production to prevent defects.
- 8
What does a control chart use to show that a process may be going out of control?
Answer: A centre line (usually the mean) with upper and lower control limits; a point outside the limits signals a possible problem.
- 9
What does the Retail Price Index (RPI) measure?
Answer: The average change in the price of a fixed 'basket' of household goods and services, compared with prices in a chosen base year.