A Level Biology Short Paper A
Covers Biological Molecules: Carbohydrates and Lipids, Biological Molecules: Proteins and Enzymes, Cell Structure and Division and 3 more.
Questions
Question 1 [2 marks]
Mass Transport in Plants
Several environmental factors affect the rate of transpiration from a leafy plant.
State two environmental factors that increase the rate of transpiration, and state how each one has this effect.
Question 2 [3 marks]
Mass Transport in Animals
Blood pressure is highest in the arteries leaving the heart and falls progressively as blood passes through the circulatory system, reaching its lowest point in the veins.
Explain why blood pressure falls as blood moves from the arteries, through the arterioles and capillaries, and into the veins.
Question 3 [3 marks]
Cell Structure and Division
A student views a cheek cell using a light microscope fitted with a camera. The photograph of the cell has a measured width of 45 mm.
The magnification used was x400.
Calculate the actual width of the cell, in micrometres.
Question 4 [3 marks]
Exchange Surfaces and Gas Exchange
Fish gills use a countercurrent exchange system, in which water flows over the gill lamellae in the opposite direction to blood flow.
Explain why a countercurrent system is more efficient at extracting oxygen than a system where the two flow in the same direction.
Question 5 [5 marks]
Biological Molecules: Carbohydrates and Lipids
A triglyceride is formed from one glycerol molecule (relative molecular mass 92) and three molecules of a fatty acid (relative molecular mass 256 each), by condensation reactions releasing water (relative molecular mass 18 each).
Calculate the relative molecular mass of the triglyceride formed, showing your working, and state the number of ester bonds formed.
Question 6 [5 marks]
Biological Molecules: Proteins and Enzymes
Enzymes can be immobilised in alginate beads rather than used free in solution.
Describe how enzymes are held in these beads and explain two advantages in an industrial process: one concerning enzyme reuse and one concerning product purity.
Question 7 [5 marks]
Mass Transport in Plants
A student cuts identical potato cylinders and places each in a different concentration of sucrose solution for 24 hours, then blots and reweighs them, in order to estimate the water potential of the potato tissue.
One cylinder had an initial mass of 4.20 g and a final mass of 3.99 g after being placed in a 1.0 mol per dm3 sucrose solution.
Calculate the percentage change in mass of this cylinder, and state what a negative percentage change in mass indicates about the initial water potential of the sucrose solution relative to the potato tissue.
Question 8 [4 marks]
Biological Molecules: Proteins and Enzymes
The induced fit and lock and key models describe enzyme action.
Explain the induced fit model of enzyme action, and explain why this model better accounts for how an enzyme lowers the activation energy of a reaction than the earlier lock and key model.
Question 9 [5 marks]
Mass Transport in Animals
A capillary bed has a total cross-sectional area 600 times greater than that of the single artery supplying it, because it consists of many narrow capillaries in parallel.
Blood flows through the supplying artery at a mean velocity of 300 mm per second.
Using the principle that the volume flow rate is constant throughout the circulation (velocity x cross-sectional area is constant), calculate the mean blood velocity in the capillaries, in mm per second, and explain the functional significance of this change in velocity for exchange at the capillary. Link your explanation to oxygen supply for aerobic respiration.
Question 10 [5 marks]
Cell Structure and Division
A tumour cell divides uncontrollably because the normal regulation of the cell cycle has broken down.
Explain how checkpoints in the cell cycle normally prevent a cell with damaged DNA from dividing, and why a mutation in a checkpoint gene can lead to uncontrolled cell division.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| one valid factor and mechanism: higher temperature increases evaporation/diffusion; stronger wind removes humid air; lower humidity steepens the water vapour gradient; or increased light opens stomata when other conditions permit | B1 |
| a second distinct valid factor with its matching mechanism (any two valid pairs, maximum 2); do not require temperature specifically | B1 |
| Final answer: Higher temperature increases evaporation and diffusion of water vapour from the leaf; higher wind speed removes humid air from around the stomata, maintaining a steeper gradient for water vapour to diffuse out | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| resistance/friction to blood flow dissipates pressure energy | B1 |
| the greatest pressure drop occurs across the arterioles, whose narrow, adjustable lumens create high resistance | B1 |
| there is no further cardiac pump between systemic arteries and veins, so cumulative resistance leaves low pressure on the venous side | B1 |
| Final answer: Resistance and friction dissipate the pressure energy generated by the heart. The greatest drop is across the arterioles, whose narrow, adjustable lumens create high resistance. With no further cardiac pump between systemic arteries and veins, cumulative resistance leaves low pressure by the time blood reaches the veins. A large total capillary cross-sectional area explains low velocity, rather than itself causing the pressure loss. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| converting 45 mm to 45000 micrometres | M1 |
| actual size = image size / magnification | M1 |
| 112.5 micrometres | A1 |
| Final answer: Image width = 45 x 1000 = 45000 micrometres. Actual width = image width / magnification = 45000 / 400 = 112.5 micrometres. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| water next to the blood has a higher oxygen partial pressure (or free dissolved oxygen concentration) at each point along the lamella | B1 |
| a diffusion gradient for oxygen is therefore maintained along the whole length of the lamella, unlike in parallel flow where the gradient falls as the two fluids move together | B1 |
| oxygen continues to diffuse into the blood along its full length, so more oxygen is absorbed than in a parallel-flow system | B1 |
| Final answer: Countercurrent flow keeps water at a higher oxygen partial pressure than adjacent blood along the whole lamella. This maintains an oxygen diffusion gradient throughout, so oxygen continues to enter blood along the full exchange surface. In parallel flow the gradient declines towards equilibrium, allowing less oxygen uptake. | |
| Question 5[5 marks] | |
|---|---|
| Answer or working | Marks |
| total mass of reactants = 92 + (3 x 256) | M1 |
| 860 | A1 |
| subtracting the mass of the three water molecules released, 3 x 18 = 54 | M1 |
| triglyceride relative molecular mass = 806 | A1 |
| three ester bonds are formed | B1 |
| Final answer: Reactant relative masses total 92 + 3 x 256 = 860. Three condensation reactions release three water molecules, with total relative mass 3 x 18 = 54. Triglyceride relative molecular mass = 860 - 54 = 806; three ester bonds form. | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| enzyme molecules are entrapped within the alginate gel while small substrate/product molecules can diffuse through it | B1 |
| the beads retain the enzyme and can be readily separated from the reaction liquid | B1 |
| the retained enzyme can be reused, reducing replacement costs | B1 |
| the product solution contains little or no enzyme because enzyme molecules remain in the beads | B1 |
| this reduces the need for subsequent purification to remove enzyme contamination | B1 |
| Final answer: Enzymes are entrapped in the alginate gel while small substrate and product molecules diffuse through it. Beads retain the enzyme and are easily separated from the reaction liquid, so the enzyme can be reused, reducing replacement costs. Product contains little or no enzyme, reducing the subsequent purification needed to remove enzyme contamination. | |
| Question 7[5 marks] | |
|---|---|
| Answer or working | Marks |
| change in mass = 3.99 - 4.20 | M1 |
| change in mass = -0.21 g | A1 |
| percentage change = (-0.21 / 4.20) x 100 | M1 |
| percentage change = -5 percent (a decrease of 5 percent) | A1 |
| water left the potato by osmosis, showing the sucrose solution initially had a lower (more negative) water potential than the potato tissue; the gradient may diminish during equilibration | B1 |
| Final answer: Change = 3.99 - 4.20 = -0.21 g; percentage change = -0.21 / 4.20 x 100 = -5 percent. Water left the tissue by osmosis, showing the sucrose solution initially had a lower water potential than the potato tissue; the gradient may diminish during equilibration. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| the active site of the enzyme is not initially a perfect complementary shape to the substrate | B1 |
| as the substrate binds, the active site changes shape slightly (is induced to change) to fit more closely around the substrate, forming the enzyme-substrate complex | B1 |
| the induced conformational change lowers activation energy by straining substrate bonds towards the transition state, stabilising the transition state, or positioning catalytic groups appropriately | B1 |
| the rigid lock and key model does not describe a binding-induced conformational change, so does not account for the proposed extra strain, catalytic-group positioning or transition-state stabilisation resulting from that change | B1 |
| Final answer: The active site is initially not perfectly complementary to the substrate. Substrate binding induces a conformational change so the active site fits more closely around it, forming an enzyme-substrate complex. This can strain substrate bonds towards the transition state, lowering activation energy. The rigid lock and key model does not describe this binding-induced change and therefore cannot account for the additional bond strain it produces. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| capillary velocity = artery velocity / area ratio, or substitution 300 / 600; accept equivalent rearrangement of continuity, one method mark only | M1 |
| capillary velocity = 0.5 mm per second | A1 |
| this much slower velocity means blood spends a longer time passing through each capillary | B1 |
| a longer transit time allows more time for diffusion of substances (e.g. oxygen, glucose, carbon dioxide) between the blood and the surrounding tissue fluid/cells | B1 |
| improved oxygen delivery helps maintain aerobic respiration and ATP production in tissue cells | B1 |
| Final answer: Capillary velocity = 300 / 600 = 0.5 mm per second. Slower flow increases capillary transit time, giving more time for diffusion of oxygen, nutrients and wastes between blood and tissue fluid. Oxygen delivery supports aerobic respiration and ATP production in tissue cells. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| checkpoints (e.g. at G1, G2 or the spindle assembly checkpoint) monitor the cell for DNA damage or correct chromosome attachment before allowing progress to the next stage | B1 |
| if damage is detected, the cycle is paused to allow repair, or the cell is directed towards apoptosis | B1 |
| checkpoint proteins are themselves coded for by genes that can mutate | B1 |
| a mutation can produce a non-functional checkpoint protein, so DNA damage is not detected or does not trigger cell-cycle arrest | B1 |
| the cell continues to divide despite the damage, producing a growing population of genetically abnormal cells | B1 |
| Final answer: Checkpoints monitor DNA integrity and halt the cycle for repair or trigger apoptosis if damage is found. Checkpoint proteins are encoded by genes. A mutation can make a checkpoint protein non-functional, so damage is not detected or fails to trigger arrest. Damaged cells then continue dividing, generating a growing abnormal population. | |