A Level Paper 2: Thermodynamics and Rates
Covers amount of substance calculations, energetics, reaction kinetics, chemical equilibria and thermodynamics.
Questions
Question 1 [2 marks]
Thermodynamics
State what is meant by the term 'entropy', and explain why the entropy of a substance is greater as a gas than as a liquid.
Question 2 [2 marks]
Chemical Equilibria
For the equilibrium N2(g) + 3H2(g) <=> 2NH3(g), deltaH = -92 kJ/mol,
state and explain the effect of increasing the temperature on the position of equilibrium.
Question 3 [2 marks]
Amount of Substance
Calculate the number of moles of sodium hydroxide, NaOH, present in 8.00 g of the solid. (Mr of NaOH = 40.0)
Question 4 [3 marks]
Reaction Kinetics
In an experiment, doubling the concentration of reactant A (with B kept constant) doubles the initial rate of reaction.
Doubling the concentration of B (with A kept constant) leaves the rate unchanged.
Deduce the order of reaction with respect to A and to B, and write the rate equation.
Question 5 [4 marks]
Energetics
0.500 g of propan-1-ol, C3H7OH (Mr = 60.0), is completely combusted and all the heat released is used to heat 100 g of water.
The standard enthalpy of combustion of propan-1-ol is -2020 kJ/mol. Calculate the temperature rise of the water. (specific heat capacity of water = 4.18 J g-1 K-1)
Question 6 [5 marks]
Chemical Equilibria
1.00 mol of NOCl is placed in a 1.00 dm3 container and allowed to reach equilibrium: 2NOCl(g) <=> 2NO(g) + Cl2(g).
At equilibrium, 0.200 mol of Cl2 has formed. Calculate the value of Kc, including units.
Question 7 [3 marks]
Reaction Kinetics
The rate equation for the reaction between P and Q, P + 2Q -> R, is found to be rate = k[P], even though the balanced equation shows 2 mol of Q reacting for every 1 mol of P.
Explain what this rate equation shows about the dependence on Q, suggest a simple mechanism consistent with it, and explain why orders cannot be predicted from the balanced chemical equation.
Question 8 [3 marks]
Chemical Equilibria
For the equilibrium N2(g) + 3H2(g) <=> 2NH3(g), state and explain the effect on the position of equilibrium of removing some NH3 from the equilibrium mixture as it forms.
Question 9 [4 marks]
Energetics
Use the mean bond enthalpies below to calculate the enthalpy change for the reaction CH4(g) + Cl2(g) -> CH3Cl(g) + HCl(g).
Bond enthalpies (kJ/mol): C-H = 413, Cl-Cl = 242, C-Cl = 339, H-Cl = 431. State whether the reaction is exothermic or endothermic, giving a reason.
Question 10 [4 marks]
Chemical Equilibria
Solid ammonium carbamate decomposes on heating: NH2COONH4(s) <=> 2NH3(g) + CO2(g).
Write the expression for Kc for this equilibrium, explaining why solid ammonium carbamate does not appear in it. If, at equilibrium, [NH3] = 0.400 mol dm-3 and [CO2] = 0.200 mol dm-3, calculate the value of Kc, including units.
Question 11 [4 marks]
Amount of Substance
25.0 cm3 of a 0.500 mol dm-3 solution of sodium hydroxide is diluted with water to produce a solution of concentration 0.100 mol dm-3.
Calculate the volume of water that must be added. Assume solution volumes are additive.
Question 12 [3 marks]
Thermodynamics
Diamond is thermodynamically less stable than graphite (deltaG for the conversion of diamond to graphite is negative at 298 K), yet diamond does not spontaneously turn into graphite under normal conditions.
Explain this observation.
Question 13 [4 marks]
Chemical Equilibria
A gaseous equilibrium, N2(g) + 3H2(g) <=> 2NH3(g), is established in a container.
Explain the effect on the position of equilibrium of adding an inert gas such as argon (a) at constant volume, and (b) at constant total pressure (allowing the container's volume to increase). Assume temperature is constant in both cases.
Question 14 [6 marks]
Energetics
Use a Born-Haber cycle and the data below to calculate the lattice enthalpy of formation of calcium oxide, CaO.
Enthalpy of formation of CaO(s) = -635 kJ/mol; enthalpy of atomisation of Ca(s) = +178 kJ/mol; 1st ionisation energy of Ca = +590 kJ/mol; 2nd ionisation energy of Ca = +1145 kJ/mol;
enthalpy of atomisation of O2(g), per mole of O atoms, = +249 kJ/mol; 1st electron affinity of O = -141 kJ/mol; 2nd electron affinity of O = +798 kJ/mol.
Question 15 [5 marks]
Amount of Substance
25.0 cm3 of a solution of sodium carbonate, Na2CO3, was titrated with 0.100 mol dm-3 hydrochloric acid.
Na2CO3 + 2HCl -> 2NaCl + H2O + CO2
The mean titre was 22.40 cm3. Calculate the concentration of the sodium carbonate solution in mol dm-3.
Question 16 [6 marks]
Energetics
Use a Born-Haber cycle and the data below to calculate the lattice enthalpy of formation of magnesium chloride, MgCl2.
Enthalpy of formation of MgCl2(s) = -641 kJ/mol; enthalpy of atomisation of Mg(s) = +148 kJ/mol;
1st ionisation energy of Mg = +738 kJ/mol; 2nd ionisation energy of Mg = +1451 kJ/mol;
enthalpy of atomisation of Cl2(g), per mole of Cl atoms, = +122 kJ/mol; electron affinity of Cl = -349 kJ/mol (per mole of Cl).
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| entropy describes the number of accessible arrangements of particles/energy or dispersal of energy | B1 |
| gas has greater freedom of movement and more accessible arrangements than liquid | B1 |
| Final answer: entropy describes the number of accessible arrangements of particles/energy or dispersal of energy; gas has greater freedom of movement and more accessible arrangements than liquid. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| the position of equilibrium shifting to the left (yield of NH3 decreases) | B1 |
| the forward reaction being exothermic, so increasing temperature favours the endothermic reverse reaction to oppose the change | B1 |
| Final answer: Equilibrium shifts left and the NH3 yield decreases: heating favours the endothermic reverse reaction, opposing the temperature increase. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| n = mass / Mr = 8.00 / 40.0 | M1 |
| 0.200 mol | A1 |
| Final answer: n = mass / molar mass = 8.00/40.0 = 0.200 mol. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| order with respect to A = 1 | B1 |
| order with respect to B = 0 | B1 |
| rate equation rate = k[A] | B1 |
| Final answer: Order in A = 1; order in B = 0; rate = k[A]. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| n(propan-1-ol) = 0.500 / 60.0 = 0.00833 mol | M1 |
| q = (0.500/60.0) x 2020 = 16.8333... kJ, retaining unrounded values | M1 |
| deltaT = q / (m x c) = 16833.3... / (100 x 4.18), converting kJ to J | M1 |
| deltaT = 40.3 deg C to 3 significant figures | A1 |
| Final answer: n(propan-1-ol) = 0.500/60.0 mol. q = (0.500/60.0) x 2020 = 16.833333... kJ = 16833.333... J. deltaT = q/(mc) = 16833.333.../(100 x 4.18) = 40.3 deg C to 3 significant figures. | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| n(NO) formed = 2 x n(Cl2) = 2 x 0.200 = 0.400 mol, from the mole ratio Cl2 : NO = 1 : 2 | M1 |
| n(NOCl) reacted = 2 x n(Cl2) = 0.400 mol, so n(NOCl) remaining = 1.00 - 0.400 = 0.600 mol | M1 |
| Kc = [NO]^2[Cl2] / [NOCl]^2 | M1 |
| substituting (0.400)^2 x 0.200 / (0.600)^2 | M1 |
| Kc = 0.0889 mol dm-3 | A1 |
| Final answer: n(NO) formed = 2 x 0.200 = 0.400 mol. n(NOCl) consumed = 0.400 mol, leaving 1.00 - 0.400 = 0.600 mol. In 1.00 dm3, [NO] = 0.400, [Cl2] = 0.200, [NOCl] = 0.600 mol dm-3. Kc = [NO]^2[Cl2]/[NOCl]^2 = 0.400^2 x 0.200 / 0.600^2 = 0.0889 mol dm-3. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| zero order with respect to Q under the conditions studied: changing [Q] does not change the rate | B1 |
| a possible mechanism with a slow step involving P followed by faster steps involving Q; the rate equation alone does not prove Q is absent from every possible rate-determining process | B1 |
| orders being determined experimentally because the overall balanced equation gives stoichiometry but does not specify elementary steps or the rate-determining step | B1 |
| Final answer: The reaction is zero order in Q under the conditions studied. A slow step involving P followed by faster reaction with Q is consistent with rate = k[P], but the mechanism is not uniquely determined. Orders must be measured experimentally because overall stoichiometry does not specify elementary steps or which step is slow. | |
| Question 8[3 marks] | |
|---|---|
| Answer or working | Marks |
| the position of equilibrium shifting to the right | B1 |
| removing NH3 decreasing its concentration, decreasing the rate of the reverse reaction relative to the forward reaction | B1 |
| the system responding by favouring the forward reaction, producing more NH3 to partially replace what was removed, until equilibrium is re-established | B1 |
| Final answer: Removing NH3 lowers its concentration and initially reduces the reverse rate relative to the forward rate. Equilibrium shifts right, producing more NH3 to partially replace what was removed, until the forward and reverse rates become equal again. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| bonds broken = 1(C-H) + 1(Cl-Cl) = 413 + 242 = 655 | M1 |
| bonds formed = 1(C-Cl) + 1(H-Cl) = 339 + 431 = 770 | M1 |
| deltaH = 655 - 770 = -115 kJ/mol | A1 |
| stating the reaction is exothermic, since deltaH is negative | B1 |
| Final answer: Bonds broken = C-H + Cl-Cl = 413 + 242 = 655 kJ/mol. Bonds formed = C-Cl + H-Cl = 339 + 431 = 770 kJ/mol. deltaH = 655 - 770 = -115 kJ/mol; exothermic because deltaH is negative. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| solid ammonium carbamate not appearing in the Kc expression, because the concentration of a pure solid is constant and is incorporated into the value of Kc itself | B1 |
| Kc = [NH3]^2[CO2] | B1 |
| substituting (0.400)^2 x 0.200 | M1 |
| Kc = 0.0320 mol3 dm-9 | A1 |
| Final answer: The pure solid is omitted because its concentration is constant and incorporated into Kc. Kc = [NH3]^2[CO2] = 0.400^2 x 0.200 = 0.0320 mol3 dm-9. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| c1V1 = c2V2 | M1 |
| V2 = (0.500 x 25.0) / 0.100 | M1 |
| V2 = 125 cm3 (the total final volume) | A1 |
| volume of water added = 125 - 25.0 = 100 cm3 | A1 |
| Final answer: c1V1 = c2V2, so V2 = 0.500 x 25.0 / 0.100 = 125 cm3. Water added = 125 - 25.0 = 100 cm3, assuming additive volumes. | |
| Question 12[3 marks] | |
|---|---|
| Answer or working | Marks |
| thermodynamic feasibility does not determine rate | B1 |
| conversion requires breaking/rearranging strong covalent bonds, giving high activation energy | B1 |
| at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable | B1 |
| Final answer: thermodynamic feasibility does not determine rate; conversion requires breaking/rearranging strong covalent bonds, giving high activation energy; at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| (a) the reacting-gas partial pressures remaining unchanged at constant volume and temperature | B1 |
| (a) no shift in equilibrium | B1 |
| (b) expansion at constant total pressure lowering the partial pressures of the reacting gases | B1 |
| (b) equilibrium shifting left towards 4 mol of reactant gas rather than 2 mol of product gas; credit this direction once | B1 |
| Final answer: (a) At constant volume and temperature, reacting-gas partial pressures are unchanged, so there is no shift. (b) At constant total pressure, expansion lowers all reacting-gas partial pressures. Equilibrium shifts left towards 4 mol of reactant gas rather than 2 mol of product gas. | |
| Question 14[6 marks] | |
|---|---|
| Answer or working | Marks |
| setting up a correct Hess's law cycle relating deltaHf to the sum of the other enthalpy terms plus the lattice enthalpy | M1 |
| using atomisation of Ca + 1st IE + 2nd IE = 178 + 590 + 1145 = 1913 kJ/mol | M1 |
| using atomisation of O + 1st EA + 2nd EA = 249 + (-141) + 798 = 906 kJ/mol | M1 |
| combining all six known terms to give a total of 2819 kJ/mol | A1 |
| lattice enthalpy = deltaHf - 2819 | M1 |
| -3454 kJ/mol | A1 |
| Final answer: Born-Haber cycle: deltaHf = atomisation(Ca) + IE1 + IE2 + atomisation(O) + EA1 + EA2 + lattice formation. Ca terms = 178 + 590 + 1145 = 1913; O terms = 249 - 141 + 798 = 906 kJ/mol. Known terms total 2819 kJ/mol, so lattice formation = deltaHf - 2819 = -635 - 2819 = -3454 kJ/mol. | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| n(HCl) = c x V = 0.100 x (22.40 / 1000) | M1 |
| n(HCl) = 0.00224 mol | A1 |
| using the mole ratio Na2CO3 : HCl = 1 : 2 to find n(Na2CO3) = 0.00112 mol | M1 |
| c = n / V using V = 25.0 / 1000 dm3 | M1 |
| 0.0448 mol dm-3 | A1 |
| Final answer: n(HCl) = 0.100 x 22.40/1000 = 0.00224 mol. n(Na2CO3) = 0.00224/2 = 0.00112 mol. c = n/V = 0.00112/(25.0/1000) = 0.0448 mol dm-3. | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| setting up a correct Hess's law cycle relating deltaHf to the sum of the other enthalpy terms plus the lattice enthalpy | M1 |
| using 2 x atomisation of Cl = 2 x 122 = 244 kJ/mol | M1 |
| using 2 x electron affinity of Cl = 2 x (-349) = -698 kJ/mol | M1 |
| atomisation of Mg + 1st IE + 2nd IE = 148 + 738 + 1451 = 2337 kJ/mol | M1 |
| combining all five known terms to give a total of 1883 kJ/mol | A1 |
| lattice enthalpy = -641 - 1883 = -2524 kJ/mol | A1 |
| Final answer: Born-Haber cycle: deltaHf = atomisation(Mg) + IE1 + IE2 + 2 atomisation(Cl) + 2 EA(Cl) + lattice formation. The Mg terms total 148 + 738 + 1451 = 2337; chlorine atomisation is 244 and electron affinities total -698 kJ/mol. Known terms sum to 2337 + 244 - 698 = 1883 kJ/mol, so lattice formation = -641 - 1883 = -2524 kJ/mol. | |