A Level Paper 3: Acids, Bases and Equilibrium
Covers amount of substance calculations, chemical equilibria, thermodynamics, acid-base chemistry and pH, and analytical techniques.
Questions
Question 1 [2 marks]
Thermodynamics
Predict, with a reason, the sign of the entropy change for the reaction CaCO3(s) -> CaO(s) + CO2(g).
Question 2 [2 marks]
Analytical Techniques
Describe a simple chemical test, including the observation, that could be used to distinguish between hex-1-ene and hexane.
Question 3 [2 marks]
Amount of Substance
Calculate the number of moles of NaOH in 250 cm3 of a 0.200 mol dm-3 solution.
Question 4 [2 marks]
Analytical Techniques
A compound's 1H NMR spectrum includes a signal at a chemical shift of 9.70 ppm. Suggest the type of proton responsible for this signal, and identify the class of compound this suggests.
Question 5 [3 marks]
Chemical Equilibria
Explain, in terms of the rates of the forward and reverse reactions, why a reversible reaction reaches dynamic equilibrium rather than going to completion, and why the concentrations of reactants and products remain constant once equilibrium is reached. Assume a closed system at constant temperature, initially containing only reactants.
Question 6 [3 marks]
Analytical Techniques
Explain what is meant by the 'fingerprint region' of an infrared spectrum, and describe how it can be used to help identify an unknown compound.
Question 7 [4 marks]
Acids, Bases and pH
10.0 cm3 of 2.00 mol dm-3 sodium hydroxide solution is diluted with water to a total volume of 250 cm3.
Calculate the pH of the diluted solution. (Kw = 1.00 x 10^-14 mol2 dm-6 at 298 K)
Question 8 [2 marks]
Analytical Techniques
The infrared spectrum of an organic compound shows a moderate absorption at 3300-3500 cm-1 (weaker and sharper than a typical O-H absorption), but no absorption around 1700 cm-1.
Identify the functional group present, and suggest a class of compound consistent with this spectrum.
Question 9 [3 marks]
Thermodynamics
Diamond is thermodynamically less stable than graphite (deltaG for the conversion of diamond to graphite is negative at 298 K), yet diamond does not spontaneously turn into graphite under normal conditions.
Explain this observation.
Question 10 [3 marks]
Acids, Bases and pH
A 0.200 mol dm-3 solution of a weak monoprotic acid, HA, has a pH of 2.80 at 298 K.
Calculate the acid dissociation constant, Ka, for HA.
Question 11 [4 marks]
Thermodynamics
A reaction has deltaH = +178 kJ/mol and deltaS = +160 J K-1 mol-1.
Calculate the minimum temperature at which the reaction becomes thermodynamically feasible, assuming deltaH and deltaS do not vary with temperature.
Question 12 [4 marks]
Amount of Substance
A compound contains 40.0% carbon, 6.7% hydrogen and 53.3% oxygen by mass.
Determine the empirical formula of the compound. (Ar: C = 12.0, H = 1.0, O = 16.0)
Question 13 [4 marks]
Chemical Equilibria
For the equilibrium H2(g) + I2(g) <=> 2HI(g), Kc = 50.0 (no units) at a certain temperature.
At equilibrium, [H2] = 0.500 mol dm-3 and [HI] = 5.00 mol dm-3. Calculate the equilibrium concentration of I2.
Question 14 [5 marks]
Amount of Substance
Excess dilute hydrochloric acid is added to 1.30 g of magnesium ribbon (Ar = 24.3).
Mg + 2HCl -> MgCl2 + H2
Calculate the volume of hydrogen gas produced, in dm3, measured at room temperature and pressure. (Assume 1 mol of gas occupies 24.0 dm3 at RTP.)
Question 15 [5 marks]
Chemical Equilibria
1.00 mol of NOCl is placed in a 1.00 dm3 container and allowed to reach equilibrium: 2NOCl(g) <=> 2NO(g) + Cl2(g).
At equilibrium, 0.200 mol of Cl2 has formed. Calculate the value of Kc, including units.
Question 16 [5 marks]
Amount of Substance
A hydrocarbon has the empirical formula CH2 and a molar mass of 84.0 g/mol.
Determine the molecular formula of this hydrocarbon. (Ar: C = 12.0, H = 1.0)
Question 17 [4 marks]
Thermodynamics
A reaction has deltaH = -172 kJ/mol and deltaS = -220 J K-1 mol-1.
Calculate the maximum temperature at which this reaction remains thermodynamically feasible, assuming deltaH and deltaS do not vary with temperature.
Question 18 [6 marks]
Amount of Substance
In an industrial process, 5.00 tonnes of iron(III) oxide, Fe2O3 (Mr = 160), is reduced with excess carbon monoxide.
Fe2O3 + 3CO -> 2Fe + 3CO2
If the reaction has a percentage yield of 92.0%, calculate the mass of iron, in tonnes, actually produced. (Ar of Fe = 56.0)
Question 19 [5 marks]
Analytical Techniques
An organic compound W has molecular formula C3H9N. Its infrared spectrum shows two moderate absorptions close together at 3300 and 3380 cm-1, but no absorption near 1700 cm-1.
Its 1H NMR spectrum shows a doublet (relative area 6), a broad signal that disappears on adding D2O (relative area 2), and a septet (relative area 1).
Deduce the structure of W, explaining your reasoning.
Question 20 [6 marks]
Amount of Substance
10.0 cm3 of a solution of sulfuric acid was diluted to a total volume of 250 cm3 with water.
A 25.0 cm3 sample of this diluted solution was titrated with 0.0500 mol dm-3 sodium hydroxide solution: H2SO4 + 2NaOH -> Na2SO4 + 2H2O.
The mean titre was 21.20 cm3. Calculate the concentration, in mol dm-3, of the original (undiluted) sulfuric acid solution.
Question 21 [6 marks]
Thermodynamics
For the combustion of ethanol, C2H5OH(l) + 3O2(g) -> 2CO2(g) + 3H2O(l), deltaH = -1367 kJ/mol.
Standard entropies (J K-1 mol-1): S(C2H5OH, l) = 161, S(O2) = 205, S(CO2) = 214, S(H2O, l) = 70.
Calculate deltaS(system) for the reaction, then calculate the total entropy change at 298 K, and state whether the reaction is feasible at this temperature.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| positive deltaS | B1 |
| gas formed from solids has more accessible arrangements | B1 |
| Final answer: positive deltaS; gas formed from solids has more accessible arrangements. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| add bromine water and shake, without UV irradiation | B1 |
| hex-1-ene decolourises orange bromine water while hexane does not; accept suitable alternative alkene test with correct conditions and contrasting observations | B1 |
| Final answer: add bromine water and shake, without UV irradiation; hex-1-ene decolourises orange bromine water while hexane does not; accept suitable alternative alkene test with correct conditions and contrasting observations. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| n = c x V = 0.200 x 0.250 | M1 |
| 0.0500 mol | A1 |
| Final answer: V = 250/1000 = 0.250 dm3; n = cV = 0.200 x 0.250 = 0.0500 mol. | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| signal is characteristic of CHO proton | B1 |
| an aldehyde is suggested, not a unique molecular structure | B1 |
| Final answer: signal is characteristic of CHO proton; an aldehyde is suggested, not a unique molecular structure. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| the rate of the forward reaction decreasing (as reactant concentration falls) while the rate of the reverse reaction increases (as product concentration rises) as the reaction proceeds | B1 |
| equilibrium being reached when the rate of the forward reaction becomes equal to the rate of the reverse reaction | B1 |
| both reactions continuing to occur at equilibrium (it is dynamic), but since their rates are equal there is no further net change in the concentrations of reactants or products | B1 |
| Final answer: Initially only reactants are present. As reactants are consumed the forward rate decreases, while accumulating products allow the reverse reaction and its reverse rate increases. Before completion the rates become equal. Both reactions continue at equilibrium, but their equal rates give no net change in concentrations. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| fingerprint region below about 1500 cm-1 | B1 |
| complex characteristic pattern of skeletal/bending vibrations | B1 |
| compare pattern with a known/reference spectrum under comparable conditions to support identification | B1 |
| Final answer: fingerprint region below about 1500 cm-1; complex characteristic pattern of skeletal/bending vibrations; compare pattern with a known/reference spectrum under comparable conditions to support identification. | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| c(NaOH) = 2.00(10.0/250) by dilution | M1 |
| [OH-] = 0.0800 mol dm-3 | A1 |
| [H+] = 1.00 x 10^-14/0.0800, or pOH = -log10(0.0800) | M1 |
| pH = 12.90 | A1 |
| Final answer: c(NaOH) = 2.00(10.0/250) by dilution; [OH-] = 0.0800 mol dm-3; [H+] = 1.00 x 10^-14/0.0800, or pOH = -log10(0.0800); pH = 12.90. | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| N-H bond suggested | B1 |
| amine consistent; primary or secondary amine acceptable, no unique type forced | B1 |
| Final answer: An N-H group is suggested, consistent with a primary or secondary amine. Absence of a carbonyl band argues against an amide. | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| thermodynamic feasibility does not determine rate | B1 |
| conversion requires breaking/rearranging strong covalent bonds, giving high activation energy | B1 |
| at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable | B1 |
| Final answer: thermodynamic feasibility does not determine rate; conversion requires breaking/rearranging strong covalent bonds, giving high activation energy; at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable. | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| [H+] = 10^-2.80 = 1.58489 x 10^-3 mol dm-3 | M1 |
| Ka = [H+]^2/(0.200-[H+]) for monoprotic HA | M1 |
| Ka = 1.27 x 10^-5 mol dm-3; accept 1.26 x 10^-5 with small-dissociation approximation | A1 |
| Final answer: [H+] = 10^-2.80 = 1.58489 x 10^-3 mol dm-3; Ka = [H+]^2/(0.200-[H+]) for monoprotic HA; Ka = 1.27 x 10^-5 mol dm-3; accept 1.26 x 10^-5 with small-dissociation approximation. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| set deltaG = 0 for boundary T = deltaH/deltaS | M1 |
| consistent units give T = 178000/160 | M1 |
| 1112.5 K, approximately 1.11 x 10^3 K | A1 |
| strictly feasible above the boundary; at the boundary deltaG = 0 | B1 |
| Final answer: set deltaG = 0 for boundary T = deltaH/deltaS; consistent units give T = 178000/160; 1112.5 K, approximately 1.11 x 10^3 K; strictly feasible above the boundary; at the boundary deltaG = 0. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| dividing each percentage by its Ar: C 3.33, H 6.7, O 3.33 | M1 |
| dividing each result by the smallest value (3.33) | M1 |
| the ratio C : H : O = 1 : 2 : 1 | A1 |
| empirical formula CH2O | A1 |
| Final answer: For 100 g, amounts C:H:O = 40.0/12.0 : 6.7/1.0 : 53.3/16.0 = 3.333 : 6.7 : 3.331. Dividing by the smallest gives approximately 1:2:1, so the empirical formula is CH2O. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| rearranging Kc = [HI]^2 / ([H2][I2]) to make [I2] the subject: [I2] = [HI]^2 / (Kc x [H2]) | M1 |
| substituting (5.00)^2 / (50.0 x 0.500) | M1 |
| [I2] = 25.0 / 25.0 | A1 |
| [I2] = 1.00 mol dm-3 | A1 |
| Final answer: Rearranging Kc = [HI]^2/([H2][I2]) gives [I2] = [HI]^2/(Kc x [H2]) = 5.00^2/(50.0 x 0.500) = 25.0/25.0 = 1.00 mol dm-3. | |
| Question 14[5 marks] | |
|---|---|
| Answer or working | Marks |
| n(Mg) = 1.30 / 24.3 | M1 |
| n(Mg) = 0.0535 mol | A1 |
| the mole ratio Mg : H2 = 1 : 1, so n(H2) = 0.0535 mol | B1 |
| volume = n(H2) x 24.0 | M1 |
| 1.28 dm3 | A1 |
| Final answer: n(Mg) = 1.30/24.3 = 0.053498 mol. Mg:H2 is 1:1, so n(H2) = 0.053498 mol. V = n x 24.0 = 1.28 dm3. | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| n(NO) formed = 2 x n(Cl2) = 2 x 0.200 = 0.400 mol, from the mole ratio Cl2 : NO = 1 : 2 | M1 |
| n(NOCl) reacted = 2 x n(Cl2) = 0.400 mol, so n(NOCl) remaining = 1.00 - 0.400 = 0.600 mol | M1 |
| Kc = [NO]^2[Cl2] / [NOCl]^2 | M1 |
| substituting (0.400)^2 x 0.200 / (0.600)^2 | M1 |
| Kc = 0.0889 mol dm-3 | A1 |
| Final answer: n(NO) formed = 2 x 0.200 = 0.400 mol. n(NOCl) consumed = 0.400 mol, leaving 1.00 - 0.400 = 0.600 mol. In 1.00 dm3, [NO] = 0.400, [Cl2] = 0.200, [NOCl] = 0.600 mol dm-3. Kc = [NO]^2[Cl2]/[NOCl]^2 = 0.400^2 x 0.200 / 0.600^2 = 0.0889 mol dm-3. | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| the empirical formula mass = 12.0 + (2 x 1.0) = 14.0 | M1 |
| dividing the molar mass by the empirical formula mass: 84.0 / 14.0 | M1 |
| a ratio of 6 | A1 |
| multiplying every subscript in CH2 by 6 | M1 |
| molecular formula C6H12 | A1 |
| Final answer: Empirical formula mass = 12.0 + 2 x 1.0 = 14.0. Multiplier = 84.0/14.0 = 6. Multiplying both subscripts in CH2 by 6 gives C6H12. | |
| Question 17[4 marks] | |
|---|---|
| Answer or working | Marks |
| boundary deltaG = 0 gives T = deltaH/deltaS | M1 |
| T = -172000/(-220) with consistent units | M1 |
| 781.8 K, about 782 K | A1 |
| deltaG < 0 below this boundary; at it deltaG = 0, and above it reaction is not feasible in this model | B1 |
| Final answer: boundary deltaG = 0 gives T = deltaH/deltaS; T = -172000/(-220) with consistent units; 781.8 K, about 782 K; deltaG < 0 below this boundary; at it deltaG = 0, and above it reaction is not feasible in this model. | |
| Question 18[6 marks] | |
|---|---|
| Answer or working | Marks |
| converting 5.00 tonnes to 5.00 x 10^6 g and calculating n(Fe2O3) = 5.00 x 10^6 / 160 = 31250 mol; accept a consistent direct mass-ratio method | M1 |
| the mole ratio Fe2O3 : Fe = 1 : 2, so theoretical n(Fe) = 62500 mol | M1 |
| theoretical mass of Fe = 62500 x 56.0 = 3.50 x 10^6 g, converting g to tonnes | M1 |
| theoretical mass = 3.50 tonnes | A1 |
| actual mass = theoretical mass x (92.0/100) | M1 |
| actual mass = 3.22 tonnes | A1 |
| Final answer: 5.00 tonnes = 5.00 x 10^6 g. n(Fe2O3) = 5.00 x 10^6/160 = 31250 mol, giving 62500 mol Fe at 100% yield. Theoretical mass = 62500 x 56.0 = 3.50 x 10^6 g = 3.50 tonnes. Actual mass = 3.50 x 0.920 = 3.22 tonnes. | |
| Question 19[5 marks] | |
|---|---|
| Answer or working | Marks |
| two N-H stretches indicate primary amine | B1 |
| D2O-exchangeable2H signal is NH2 | B1 |
| 6H doublet is two equivalent methyl groups, each split by one CH proton | B1 |
| 1H septet is CH split by six equivalent methyl protons | B1 |
| (CH3)2CHNH2, propan-2-amine, matches C3H9N | B1 |
| Final answer: two N-H stretches indicate primary amine; D2O-exchangeable2H signal is NH2; 6H doublet is two equivalent methyl groups, each split by one CH proton; 1H septet is CH split by six equivalent methyl protons; (CH3)2CHNH2, propan-2-amine, matches C3H9N. | |
| Question 20[6 marks] | |
|---|---|
| Answer or working | Marks |
| n(NaOH) = 0.0500 x (21.20/1000) | M1 |
| n(NaOH) = 0.00106 mol | A1 |
| n(H2SO4) in the 25.0 cm3 sample = n(NaOH) / 2 = 0.000530 mol | M1 |
| scaling up to the whole 250 cm3 diluted solution: n(H2SO4) = 0.000530 x (250/25.0) = 0.00530 mol | M1 |
| concentration scaling by the dilution factor 250/10.0 = 25, or for carrying the 0.00530 mol into the original 0.0100 dm3 volume; no verbal conservation statement required | M1 |
| concentration of the original acid = 0.00530 / (10.0/1000) = 0.530 mol dm-3 | A1 |
| Final answer: n(NaOH) = 0.0500 x 21.20/1000 = 0.00106 mol. n(H2SO4) in 25.0 cm3 = 0.00106/2 = 0.000530 mol. In 250 cm3, n(H2SO4) = 0.000530 x 250/25.0 = 0.00530 mol. This was in the original 0.0100 dm3, so c = 0.00530/0.0100 = 0.530 mol dm-3. | |
| Question 21[6 marks] | |
|---|---|
| Answer or working | Marks |
| deltaSsystem = 2(214) + 3(70) - (161 + 3(205)) | M1 |
| -138 J K-1 mol-1 | A1 |
| deltaSsur = 1367000/298 = +4587.25 J K-1 mol-1 | M1 |
| deltaStotal = -138 + 4587.25 | M1 |
| +4449.25 J K-1 mol-1, accept +4450 | A1 |
| positive total entropy change predicts feasibility at 298 K | B1 |
| Final answer: deltaSsystem = 2(214) + 3(70) - (161 + 3(205)); -138 J K-1 mol-1; deltaSsur = 1367000/298 = +4587.25 J K-1 mol-1; deltaStotal = -138 + 4587.25; +4449.25 J K-1 mol-1, accept +4450; positive total entropy change predicts feasibility at 298 K. | |