A Level Paper 4: Organic Chemistry and Analysis
Covers bonding and structure, reaction kinetics, redox and electrode potentials, organic chemistry and analytical techniques.
Questions
Question 1 [2 marks]
Reaction Kinetics
In an experiment, doubling the concentration of reactant Z (with all other reactants held constant) has no effect on the initial rate of reaction.
State the order of reaction with respect to Z, and explain your reasoning.
Question 2 [2 marks]
Analytical Techniques
A compound's 1H NMR spectrum includes a signal at a chemical shift of 9.70 ppm. Suggest the type of proton responsible for this signal, and identify the class of compound this suggests.
Question 3 [2 marks]
Redox and Electrode Potentials
Deduce the oxidation state of chromium in the dichromate ion, Cr2O7^2-.
Question 4 [2 marks]
Organic Chemistry
Name the compound CH3CH2CH(CH3)CH2OH, and identify its functional group.
Question 5 [2 marks]
Redox and Electrode Potentials
Using standard electrode potentials E(Zn2+/Zn) = -0.76 V and E(H+/H2) = 0.00 V, predict, with a reason, whether zinc metal will react with dilute sulfuric acid to produce hydrogen gas.
Question 6 [3 marks]
Bonding and Structure
Using the idea of electronegativity, explain why the C-F bond is more polar than the C-Cl bond, even though both fluorine and chlorine are more electronegative than carbon.
Question 7 [2 marks]
Analytical Techniques
The infrared spectrum of an organic compound shows a moderate absorption at 3300-3500 cm-1 (weaker and sharper than a typical O-H absorption), but no absorption around 1700 cm-1.
Identify the functional group present, and suggest a class of compound consistent with this spectrum.
Question 8 [4 marks]
Bonding and Structure
Explain, in terms of hydrogen bonding, why ice is less dense than liquid water.
Question 9 [3 marks]
Redox and Electrode Potentials
Standard electrode potentials are given below:
E(F2/F-) = +2.87 V, E(Cl2/Cl-) = +1.36 V, E(Br2/Br-) = +1.07 V, E(I2/I-) = +0.54 V
Use these values to rank F2, Cl2, Br2 and I2 in order of decreasing oxidising strength, and use your answer to predict whether chlorine will displace bromide ions, Br-, from aqueous solution.
Question 10 [3 marks]
Analytical Techniques
Predict the number of distinct proton (1H) environments in propan-1-ol, CH3CH2CH2OH,
and give the splitting pattern expected for the CH2 group adjacent to the OH group in its 1H NMR spectrum. Assume rapid OH proton exchange so that coupling to OH is not resolved.
Question 11 [3 marks]
Redox and Electrode Potentials
A cell is made from a Zn2+(aq)/Zn(s) half-cell (E = -0.76 V) connected to a Cu2+(aq)/Cu(s) half-cell (E = +0.34 V) by a salt bridge.
Write the conventional cell diagram for this cell, and calculate its standard EMF.
Question 12 [3 marks]
Analytical Techniques
The mass spectrum of a halogenoalkane shows a molecular ion peak at m/z = 94 and a peak of roughly equal intensity at m/z = 96, with no other significant molecular ion peaks nearby.
Identify which halogen is present in the compound, explaining your reasoning.
Question 13 [4 marks]
Bonding and Structure
State the structural requirements for hydrogen bonding to occur between two molecules, and use them to explain why methanol, CH3OH, can hydrogen bond with water but methane, CH4, cannot.
Question 14 [3 marks]
Analytical Techniques
An infrared spectrum of an unknown organic compound shows a strong sharp absorption at 1735 cm-1 but no broad absorption in the range 2500-3300 cm-1.
Identify the functional group present, explain why a carboxylic acid can be ruled out, and suggest a class of compound (other than a carboxylic acid or alcohol) consistent with this spectrum.
Question 15 [5 marks]
Bonding and Structure
Tetrachloromethane, CCl4, is a non-polar molecule overall, but trichloromethane, CHCl3, is polar overall, even though both molecules are tetrahedral and contain polar C-Cl bonds.
Explain this difference.
Question 16 [5 marks]
Analytical Techniques
An organic compound Z has molecular formula C4H8O2. Its infrared spectrum shows a strong absorption at 1740 cm-1 and no broad absorption in the 2500-3300 cm-1 region.
Its 1H NMR spectrum shows a triplet at 1.15 ppm (relative area 3), a quartet at 2.30 ppm (relative area 2), and a singlet at 3.65 ppm (relative area 3).
Deduce the structure of Z, explaining your reasoning.
Question 17 [6 marks]
Bonding and Structure
Explain, in terms of structure and bonding, why silicon dioxide, SiO2, has a much higher melting point than carbon dioxide, CO2, even though both contain a Group 4 element bonded to oxygen. Compare at a pressure at which both substances can exist as liquids.
Question 18 [6 marks]
Reaction Kinetics
The rate equation for a reaction between X and Y is rate = k[X]^2[Y]^2.
In one experiment, [X] = 0.200 mol dm-3, [Y] = 0.400 mol dm-3, and the initial rate is 5.12 x 10^-4 mol dm-3 s-1.
Calculate the value of k, including its units.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| zero order with respect to Z | B1 |
| applying rate proportional to [Z]^n: the rate ratio is 2^n = 1 when [Z] doubles, so n = 0 | M1 |
| Final answer: If rate is proportional to [Z]^n, doubling [Z] gives rate ratio 2^n. The unchanged rate gives 2^n = 1, hence n = 0: zero order in Z. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| signal is characteristic of CHO proton | B1 |
| an aldehyde is suggested, not a unique molecular structure | B1 |
| Final answer: signal is characteristic of CHO proton; an aldehyde is suggested, not a unique molecular structure. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| 2Cr + 7(-2) = -2 | M1 |
| Cr = +6 | A1 |
| Final answer: 2Cr + 7(-2) = -2; Cr = +6. | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| 2-methylbutan-1-ol | B1 |
| alcohol/hydroxyl functional group | B1 |
| Final answer: 2-methylbutan-1-ol; alcohol/hydroxyl functional group. | |
| Question 5[2 marks] | |
|---|---|
| Answer or working | Marks |
| EMF = 0.00 - (-0.76) = +0.76 V | M1 |
| positive EMF predicts zinc reacting with acid to release hydrogen, by Zn oxidation and H+ reduction | B1 |
| Final answer: EMF = 0.00 - (-0.76) = +0.76 V; positive EMF predicts zinc reacting with acid to release hydrogen, by Zn oxidation and H+ reduction. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| fluorine having a greater electronegativity than chlorine | B1 |
| the electronegativity difference between C and F therefore being greater than the difference between C and Cl | B1 |
| a greater electronegativity difference producing a greater separation of charge, so the C-F bond is more polar than the C-Cl bond | B1 |
| Final answer: F is more electronegative than Cl, so the electronegativity difference between C and F is greater than between C and Cl. C-F therefore has greater separation of partial charge and greater bond polarity. | |
| Question 7[2 marks] | |
|---|---|
| Answer or working | Marks |
| N-H bond suggested | B1 |
| amine consistent; primary or secondary amine acceptable, no unique type forced | B1 |
| Final answer: An N-H group is suggested, consistent with a primary or secondary amine. Absence of a carbonyl band argues against an amide. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| each water molecule being able to form up to 4 hydrogen bonds with neighbouring molecules | B1 |
| these hydrogen bonds holding molecules in a fixed, open (hexagonal) lattice structure in ice | B1 |
| this open lattice having more empty space between molecules than in liquid water, where hydrogen bonds constantly break and reform, allowing molecules to pack more closely | B1 |
| the same mass of water therefore occupying a larger volume as ice, making ice less dense than liquid water | B1 |
| Final answer: Each water molecule can form up to four hydrogen bonds. In ice these hold molecules in a fixed, open hexagonal lattice with substantial empty space. In liquid water hydrogen bonds continually break and reform, allowing closer packing. The same mass therefore occupies a larger volume as ice, so ice is less dense. | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| F2 > Cl2 > Br2 > I2 in decreasing oxidising strength | B1 |
| more positive reduction potential means greater tendency to gain electrons | B1 |
| predicting that chlorine displaces bromide ions from aqueous solution; explanation is credited separately once | B1 |
| Final answer: F2 > Cl2 > Br2 > I2 in decreasing oxidising strength; more positive reduction potential means greater tendency to gain electrons; predicting that chlorine displaces bromide ions from aqueous solution; explanation is credited separately once. | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| four environments, CH3, central CH2, CH2OH and OH | B1 |
| adjacent CH2 contributes two equivalent coupling protons, ignoring rapidly exchanging OH | B1 |
| CH2OH is a triplet by n+1 with n = 2 | B1 |
| Final answer: four environments, CH3, central CH2, CH2OH and OH; adjacent CH2 contributes two equivalent coupling protons, ignoring rapidly exchanging OH; CH2OH is a triplet by n+1 with n = 2. | |
| Question 11[3 marks] | |
|---|---|
| Answer or working | Marks |
| Zn(s)/Zn2+(aq) on left and Cu2+(aq)/Cu(s) on right | B1 |
| correct phase and salt-bridge boundaries in Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s) | B1 |
| EMF = 0.34 - (-0.76) = +1.10 V | A1 |
| Final answer: Zn(s)/Zn2+(aq) on left and Cu2+(aq)/Cu(s) on right; correct phase and salt-bridge boundaries in Zn(s) | Zn2+(aq) || Cu2+(aq) | Cu(s); EMF = 0.34 - (-0.76) = +1.10 V. | |
| Question 12[3 marks] | |
|---|---|
| Answer or working | Marks |
| bromine present | B1 |
| 79Br and 81Br have roughly equal abundance | B1 |
| isotopes two mass units apart give near 1:1 M and M+2 peaks; a single bromine atom is consistent with the pair | B1 |
| Final answer: bromine present; 79Br and 81Br have roughly equal abundance; isotopes two mass units apart give near 1:1 M and M+2 peaks; a single bromine atom is consistent with the pair. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| a hydrogen atom covalently bonded directly to N, O or F as the hydrogen-bond donor | B1 |
| a lone pair on N, O or F of the neighbouring molecule as the hydrogen-bond acceptor | B1 |
| methanol and water having O-H donor bonds and oxygen lone pairs, allowing hydrogen bonding between them | B1 |
| methane lacking both an H-N/O/F donor bond and a suitable lone-pair acceptor, so it cannot hydrogen bond with water | B1 |
| Final answer: Hydrogen bonding requires H bonded directly to N, O or F, producing a strong dipole with a sufficiently positive H, and a lone pair on N, O or F of another molecule. Methanol and water both have O-H donor bonds and oxygen lone pairs, so they can hydrogen bond with each other. Methane has neither such an H nor an appropriate lone pair, so it cannot. | |
| Question 14[3 marks] | |
|---|---|
| Answer or working | Marks |
| strong 1735 cm-1 absorption indicates carbonyl C=O | B1 |
| absence of broad acid OH absorption rules out a typical carboxylic acid | B1 |
| ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class | B1 |
| Final answer: strong 1735 cm-1 absorption indicates carbonyl C=O; absence of broad acid OH absorption rules out a typical carboxylic acid; ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class. | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| chlorine being more electronegative than carbon and attracting the shared bonding electrons towards itself; no mark for merely repeating that C-Cl bonds are polar | B1 |
| CCl4 being a symmetrical tetrahedral molecule with four identical C-Cl bonds arranged symmetrically around the central carbon | B1 |
| the four identical bond dipoles in CCl4 cancelling out exactly by symmetry, giving no overall molecular dipole | B1 |
| CHCl3 having one C-H bond in place of one C-Cl bond, so the four bonds around carbon are not all identical | B1 |
| the C-H bond dipole failing to cancel the resultant of the three C-Cl dipoles, so CHCl3 has an overall (net) dipole moment | B1 |
| Final answer: Cl is more electronegative than C and attracts the shared bonding electrons towards itself. In CCl4 four identical C-Cl bonds are arranged symmetrically in a tetrahedron, so their dipoles cancel. CHCl3 has a C-H bond in place of one C-Cl bond; its dipole cannot cancel the resultant of the other three C-Cl dipoles, leaving a net dipole. | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| carbonyl with no broad acid OH is consistent with ester | B1 |
| 3.65 ppm singlet3H is OCH3 without appreciable neighbouring proton coupling | B1 |
| triplet3H and quartet2H identify coupled CH3CH2 group | B1 |
| CH2 shift2.30 ppm supports location next to carbonyl rather than oxygen | B1 |
| CH3CH2COOCH3, methyl propanoate, matches molecular formula and all assignments | B1 |
| Final answer: carbonyl with no broad acid OH is consistent with ester; 3.65 ppm singlet3H is OCH3 without appreciable neighbouring proton coupling; triplet3H and quartet2H identify coupled CH3CH2 group; CH2 shift2.30 ppm supports location next to carbonyl rather than oxygen; CH3CH2COOCH3, methyl propanoate, matches molecular formula and all assignments. | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| silicon dioxide being a giant covalent (macromolecular) structure | B1 |
| each silicon atom being bonded to four oxygen atoms (and each oxygen to two silicon atoms) by strong covalent bonds throughout the lattice | B1 |
| carbon dioxide existing as simple, discrete molecules | B1 |
| CO2 molecules being held together only by weak van der Waals forces | B1 |
| much more energy being needed to break the many strong covalent bonds throughout the SiO2 lattice than to overcome the weak forces between CO2 molecules | B1 |
| recognising that the strong covalent C=O bonds within individual CO2 molecules remain intact during melting | B1 |
| Final answer: SiO2 has a giant covalent structure: each Si bonds to four O atoms, each O to two Si atoms. Melting requires breaking strong covalent bonds throughout this network. CO2 consists of discrete molecules with weak London forces between them, so far less energy is needed to melt it at a suitable pressure. The strong C=O bonds within CO2 molecules remain intact. | |
| Question 18[6 marks] | |
|---|---|
| Answer or working | Marks |
| k = rate / ([X]^2[Y]^2) | M1 |
| evaluating [X]^2 = 0.0400 | A1 |
| evaluating [Y]^2 = 0.1600 | A1 |
| substituting to give k = 5.12 x 10^-4 / (0.0400 x 0.1600) | M1 |
| k = 0.0800 | A1 |
| units mol-3 dm9 s-1 | A1 |
| Final answer: k = rate/([X]^2[Y]^2); [X]^2 = 0.0400 and [Y]^2 = 0.1600. k = 5.12 x 10^-4/(0.0400 x 0.1600) = 0.0800 mol-3 dm9 s-1. | |