Revision Library
Choose a subject
Menu
Chemistry
Need a new topic?
Missing a topic, found a bug, or want something added?

A Level Paper 5: Structure, Redox and Organic Chemistry

Covers atomic structure, energetics, redox and electrode potentials, periodicity, acid-base chemistry and pH, and organic chemistry.

22 questions - 80 marks - calculator allowed

Download PDF

Open A Level Chemistry workspace

Questions

Question 1 [2 marks]

Atomic Structure

Write the full electron configuration for a chlorine atom (atomic number 17).

Question 2 [2 marks]

Redox and Electrode Potentials

Deduce the oxidation state of chromium in the dichromate ion, Cr2O7^2-.

Question 3 [3 marks]

Periodicity

Write an equation for the reaction of strontium with dilute hydrochloric acid, and state how the rate of this reaction compares with the same reaction using magnesium, giving a reason for the difference.

Question 4 [3 marks]

Organic Chemistry

But-1-ene reacts with hydrogen bromide, HBr. Name the type of reaction involved, give the structural formula of the major organic product,

and explain your answer using Markovnikov's rule.

Question 5 [3 marks]

Acids, Bases and pH

State the meaning of the term 'strong acid', and explain why a 0.100 mol dm-3 solution of hydrochloric acid has a much lower pH than a 0.100 mol dm-3 solution of ethanoic acid.

Question 6 [3 marks]

Energetics

In a neutralisation experiment, 50.0 cm3 of 1.00 mol dm-3 hydrochloric acid was mixed with 50.0 cm3 of 1.00 mol dm-3 sodium hydroxide solution, and the temperature of the mixture rose by 6.80 deg C.

Calculate the heat released in this reaction, in J. (specific heat capacity of the solution = 4.18 J g-1 K-1; density of the solution = 1.00 g cm-3)

Question 7 [3 marks]

Atomic Structure

Explain briefly why the first ionisation energy of neon is greater than that of every other element in Period 2.

Question 8 [3 marks]

Periodicity

Magnesium oxide reacts very slowly with cold water, but barium oxide reacts vigorously with cold water to give a strongly alkaline solution.

Write an equation for the reaction of barium oxide with water, and explain why magnesium oxide is much less reactive than barium oxide.

Question 9 [3 marks]

Atomic Structure

Successive ionisation energies for element X, in kJ/mol, are: 590, 1145, 4912, 6474, 8144.

Deduce which group of the periodic table element X is in, explaining your reasoning.

Question 10 [3 marks]

Redox and Electrode Potentials

Iron(II) ions are oxidised by acidified potassium dichromate(VI) solution.

Using the half-equations Fe2+ -> Fe3+ + e- and Cr2O7^2- + 14H+ + 6e- -> 2Cr3+ + 7H2O, construct the overall ionic equation for the reaction, and identify the oxidising agent.

Question 11 [4 marks]

Organic Chemistry

2-bromopropane can react with sodium hydroxide by nucleophilic substitution or by elimination, depending on the conditions used.

State the reagent, solvent and conditions that favour elimination rather than substitution, write an equation for the elimination reaction, and name the mechanism type.

Question 12 [4 marks]

Atomic Structure

A line in the visible emission spectrum of atomic hydrogen has a wavelength of 4.86 x 10^-7 m.

Calculate the energy of one photon emitted at this wavelength, using E = h x c / wavelength. (h = 6.63 x 10^-34 J s; c = 3.00 x 10^8 m/s)

Question 13 [4 marks]

Organic Chemistry

1-bromobutane (a primary haloalkane) and 2-bromo-2-methylpropane (a tertiary haloalkane) react with hot aqueous sodium hydroxide by nucleophilic substitution.

Compare their predominant mechanisms and explain why formation of a tertiary carbocation is more favourable than formation of a primary carbocation. Explain why the relative rates of these two different mechanisms cannot be ranked from carbocation stability alone.

Question 14 [4 marks]

Energetics

Calculate the enthalpy change for the reaction CH4(g) + 2O2(g) -> CO2(g) + 2H2O(l), given the standard enthalpies of formation:

CH4(g) = -74.8 kJ/mol, CO2(g) = -393.5 kJ/mol, H2O(l) = -285.8 kJ/mol (deltaHf of O2(g) = 0).

Question 15 [4 marks]

Acids, Bases and pH

Calculate the percentage dissociation of ethanoic acid in a 0.0500 mol dm-3 solution. (Ka = 1.74 x 10^-5 mol dm-3)

Question 16 [4 marks]

Organic Chemistry

Ethanoyl chloride, CH3COCl, reacts vigorously with water at room temperature, but ethanoic acid does not.

Write an equation for the reaction of ethanoyl chloride with water, state what would be observed, and explain why acyl chlorides are much more reactive towards nucleophiles than the corresponding carboxylic acids.

Question 17 [3 marks]

Redox and Electrode Potentials

Using standard electrode potentials E(Fe3+/Fe2+) = +0.77 V and E(Sn4+/Sn2+) = +0.15 V, calculate the EMF for the reaction in which Sn2+ ions reduce Fe3+ ions to Fe2+, and predict whether this reaction is thermodynamically feasible.

Question 18 [4 marks]

Periodicity

Explain why the thermal stability of Group 2 carbonates increases down the group, in terms of ionic radius and polarising power.

Question 19 [5 marks]

Atomic Structure

Successive ionisation energies for element Y, in kJ/mol, are: 1000, 2260, 3390, 4540, 6990, 8500, 27100, 31670.

Deduce the group of the periodic table in which Y belongs, explaining your reasoning.

Question 20 [4 marks]

Redox and Electrode Potentials

When iodine reacts with cold, dilute sodium hydroxide solution, it disproportionates to form iodide ions, I-, and iodate(I) ions, IO-.

Using the half-equations I2 + 2e- -> 2I- and I2 + 4OH- -> 2IO- + 2H2O + 2e-, construct the overall equation for this disproportionation reaction, and state the change in oxidation state of iodine in each half-equation.

Question 21 [6 marks]

Atomic Structure

Explain why the first ionisation energy of sulfur is lower than that of phosphorus, even though sulfur has a greater nuclear charge. Use electron configurations in your answer.

Question 22 [6 marks]

Acids, Bases and pH

A buffer solution is made from 500 cm3 of a solution containing 0.200 mol ethanoic acid and 0.150 mol sodium ethanoate. (Ka of ethanoic acid = 1.74 x 10^-5 mol dm-3)

Calculate the pH of this buffer. Then calculate the new pH after 10.0 cm3 of 1.00 mol dm-3 hydrochloric acid is added to it.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
1s2 2s2 2p6 3s2 correctB1
3p5 correct, giving 17 electrons in totalB1
Final answer: 1s2 2s2 2p6 3s2 3p5
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
2Cr + 7(-2) = -2M1
Cr = +6A1
Final answer: 2Cr + 7(-2) = -2; Cr = +6.
Mark scheme for Question 3 [3 marks]
Question 3[3 marks]
Answer or workingMarks
Sr + 2HCl -> SrCl2 + H2B1
Sr reacts faster than MgB1
greater radius/shielding lowers energy needed to lose outer electrons in SrB1
Final answer: Sr + 2HCl -> SrCl2 + H2; Sr reacts faster than Mg; greater radius/shielding lowers energy needed to lose outer electrons in Sr.
Mark scheme for Question 4 [3 marks]
Question 4[3 marks]
Answer or workingMarks
electrophilic additionB1
CH3CHBrCH2CH3 is the major productB1
H adds to the carbon initially carrying more H atoms, corresponding to the more stable secondary carbocation (Markovnikov orientation)B1
Final answer: electrophilic addition; CH3CHBrCH2CH3 is the major product; H adds to the carbon initially carrying more H atoms, corresponding to the more stable secondary carbocation (Markovnikov orientation).
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
a strong acid fully dissociates in aqueous solutionB1
ethanoic acid partly dissociates, giving smaller [H+] than fully dissociated HCl of the same concentrationB1
pH = -log10[H+], so greater [H+] means lower pHB1
Final answer: a strong acid fully dissociates in aqueous solution; ethanoic acid partly dissociates, giving smaller [H+] than fully dissociated HCl of the same concentration; pH = -log10[H+], so greater [H+] means lower pH.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
total mass of solution = 50.0 + 50.0 = 100 gM1
q = m x c x deltaT = 100 x 4.18 x 6.80M1
2840 J (2.84 kJ) released; accept explicitly signed reaction heat -2840 JA1
Final answer: Total solution mass = (50.0 + 50.0) x 1.00 = 100 g. Heat released = mc deltaT = 100 x 4.18 x 6.80 = 2842.4 J = 2840 J (2.84 kJ) to 3 significant figures.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
neon having the greatest nuclear charge of any Period 2 elementB1
neon having the smallest atomic radius in Period 2, with little change in shielding across the periodB1
neon's outer electrons therefore being held most strongly, so removing one needs the most energyB1
Final answer: Neon has the greatest nuclear charge in Period 2. Shielding changes little because electrons enter the same principal shell, so neon has the smallest atomic radius and the strongest attraction to its outer electrons. Removing one requires the most energy.
Mark scheme for Question 8 [3 marks]
Question 8[3 marks]
Answer or workingMarks
BaO + H2O -> Ba(OH)2B1
Mg2+ is smaller with higher charge density than Ba2+B1
MgO has a stronger lattice and greater dissociation cost, making attack by water more difficult; accept inhibiting surface Mg(OH)2 as additional explanationB1
Final answer: BaO + H2O -> Ba(OH)2; Mg2+ is smaller with higher charge density than Ba2+; MgO has a stronger lattice and greater dissociation cost, making attack by water more difficult; accept inhibiting surface Mg(OH)2 as additional explanation.
Mark scheme for Question 9 [3 marks]
Question 9[3 marks]
Answer or workingMarks
identifying the large jump in ionisation energy between the 2nd and 3rd valuesB1
explaining this shows 2 electrons are removed relatively easily from an outer shell before the next electron is removed from a full inner shellB1
X is in Group 2B1
Final answer: Group 2: the large jump from the second to third ionisation energy shows two outer-shell electrons; the third electron is removed from an inner shell.
Mark scheme for Question 10 [3 marks]
Question 10[3 marks]
Answer or workingMarks
multiplying Fe2+ oxidation by 6 to match six electronsM1
6Fe2+ + Cr2O7^2- + 14H+ -> 6Fe3+ + 2Cr3+ + 7H2O after combining and cancellingA1
Cr2O7^2- is the oxidising agent because chromium is reducedB1
Final answer: multiplying Fe2+ oxidation by 6 to match six electrons; 6Fe2+ + Cr2O7^2- + 14H+ -> 6Fe3+ + 2Cr3+ + 7H2O after combining and cancelling; Cr2O7^2- is the oxidising agent because chromium is reduced.
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
concentrated ethanolic NaOH; accept ethanolic KOHB1
heat under reflux favours eliminationB1
CH3CHBrCH3 + NaOH -> CH3CH=CH2 + NaBr + H2O; accept equivalent ionic equationB1
elimination/beta-elimination/E2 mechanism; base removes a proton from adjacent carbon, not a hydrogen atomB1
Final answer: concentrated ethanolic NaOH; accept ethanolic KOH; heat under reflux favours elimination; CH3CHBrCH3 + NaOH -> CH3CH=CH2 + NaBr + H2O; accept equivalent ionic equation; elimination/beta-elimination/E2 mechanism; base removes a proton from adjacent carbon, not a hydrogen atom.
Mark scheme for Question 12 [4 marks]
Question 12[4 marks]
Answer or workingMarks
substituting h and c into their product: (6.63 x 10^-34) x (3.00 x 10^8); alternatively substituting c and wavelength into c / wavelengthM1
h x c = 1.989 x 10^-25 J m, or frequency c / wavelength = 6.17 x 10^14 s^-1A1
dividing the evaluated h x c by 4.86 x 10^-7 m, or multiplying the evaluated frequency by h; credit this operation onceM1
E = 4.09 x 10^-19 JA1
Final answer: h x c = 6.63 x 10^-34 x 3.00 x 10^8 = 1.989 x 10^-25 J m. E = (h x c) / wavelength = 1.989 x 10^-25 / (4.86 x 10^-7) = 4.09 x 10^-19 J.
Mark scheme for Question 13 [4 marks]
Question 13[4 marks]
Answer or workingMarks
primary haloalkane predominantly SN2, concerted OH- backside attack and C-Br cleavageB1
tertiary haloalkane predominantly SN1, C-Br heterolysis before OH- attackB1
tertiary carbocation stabilised by alkyl electron donation, lowering the ionisation barrier relative to an unstable primary carbocationB1
SN1 rate depends on haloalkane concentration, while SN2 rate also depends on OH- concentration, so cross-mechanism rates cannot be ranked universallyB1
Final answer: primary haloalkane predominantly SN2, concerted OH- backside attack and C-Br cleavage; tertiary haloalkane predominantly SN1, C-Br heterolysis before OH- attack; tertiary carbocation stabilised by alkyl electron donation, lowering the ionisation barrier relative to an unstable primary carbocation; SN1 rate depends on haloalkane concentration, while SN2 rate also depends on OH- concentration, so cross-mechanism rates cannot be ranked universally.
Mark scheme for Question 14 [4 marks]
Question 14[4 marks]
Answer or workingMarks
deltaHr = sum deltaHf(products) - sum deltaHf(reactants), with correct coefficientsM1
correctly substituting values into the expressionM1
products sum -965.1 kJ/mol and reactants sum -74.8 kJ/molA1
-890.3 kJ/molA1
Final answer: deltaHr = sum deltaHf(products) - sum deltaHf(reactants). Products = -393.5 + 2(-285.8) = -965.1 kJ/mol; reactants = -74.8 + 2(0) = -74.8 kJ/mol. deltaHr = -965.1 - (-74.8) = -890.3 kJ/mol.
Mark scheme for Question 15 [4 marks]
Question 15[4 marks]
Answer or workingMarks
Ka = x^2/(0.0500-x); accept x approximately sqrt(Ka times 0.0500)M1
[H+] = 9.24 x 10^-4 exact, or 9.33 x 10^-4 approximate, mol dm-3A1
percentage dissociation = x/0.0500 times 100M1
1.85% exact or 1.87% using small-dissociation approximationA1
Final answer: Ka = x^2/(0.0500-x); accept x approximately sqrt(Ka times 0.0500); [H+] = 9.24 x 10^-4 exact, or 9.33 x 10^-4 approximate, mol dm-3; percentage dissociation = x/0.0500 times 100; 1.85% exact or 1.87% using small-dissociation approximation.
Mark scheme for Question 16 [4 marks]
Question 16[4 marks]
Answer or workingMarks
CH3COCl + H2O -> CH3COOH + HClB1
steamy acidic HCl fumes/vigorous reactionB1
Cl- is a better leaving group than OH-B1
OH lone-pair donation stabilises the acid carbonyl more effectively, making its carbon less electrophilic than in acyl chlorideB1
Final answer: CH3COCl + H2O -> CH3COOH + HCl; steamy acidic HCl fumes/vigorous reaction; Cl- is a better leaving group than OH-; OH lone-pair donation stabilises the acid carbonyl more effectively, making its carbon less electrophilic than in acyl chloride.
Mark scheme for Question 17 [3 marks]
Question 17[3 marks]
Answer or workingMarks
EMF = 0.77 - 0.15M1
+0.62 VA1
positive EMF makes the reaction thermodynamically feasible under standard conditionsB1
Final answer: EMF = 0.77 - 0.15; +0.62 V; positive EMF makes the reaction thermodynamically feasible under standard conditions.
Mark scheme for Question 18 [4 marks]
Question 18[4 marks]
Answer or workingMarks
cation radius increases down Group 2B1
same +2 charge spread over larger radius gives lower charge density and polarising powerB1
carbonate electron cloud is distorted less, so C-O bonds are weakened lessB1
more heat is required for decomposition, giving greater thermal stabilityB1
Final answer: cation radius increases down Group 2; same +2 charge spread over larger radius gives lower charge density and polarising power; carbonate electron cloud is distorted less, so C-O bonds are weakened less; more heat is required for decomposition, giving greater thermal stability.
Mark scheme for Question 19 [5 marks]
Question 19[5 marks]
Answer or workingMarks
identifying that the first six ionisation energies increase relatively steadilyB1
identifying the large jump in ionisation energy between the 6th and 7th valuesB1
explaining this shows 6 electrons are removed relatively easily from an outer shell before the 7th electron is removed from a full inner shellB1
Y being in Group 16 (Group 6 in the main-group convention); accept either conventionB1
explaining that removing an electron from a full inner shell needs much more energy because it is closer to the nucleus and experiences less shieldingB1
Final answer: The first six ionisation energies rise relatively steadily, followed by a large jump from the sixth to seventh. Six electrons occupy the outer shell, giving Group 16 (Group 6 in the main-group convention). The seventh electron comes from a closer, less shielded inner shell and needs much more energy to remove.
Mark scheme for Question 20 [4 marks]
Question 20[4 marks]
Answer or workingMarks
first half-equation has iodine 0 to -1 (reduction)B1
second half-equation has iodine 0 to +1 (oxidation)B1
adding the supplied halves cancels two electrons on each sideM1
I2 + 2OH- -> I- + IO- + H2O; accept the equivalent doubled equation, no extra mark for dividing coefficientsA1
Final answer: first half-equation has iodine 0 to -1 (reduction); second half-equation has iodine 0 to +1 (oxidation); adding the supplied halves cancels two electrons on each side; I2 + 2OH- -> I- + IO- + H2O; accept the equivalent doubled equation, no extra mark for dividing coefficients.
Mark scheme for Question 21 [6 marks]
Question 21[6 marks]
Answer or workingMarks
the electron configuration of phosphorus, [Ne]3s2 3p3B1
the electron configuration of sulfur, [Ne]3s2 3p4B1
phosphorus having a half-filled 3p subshell, with one electron in each of the three 3p orbitalsB1
sulfur having two electrons paired together in one 3p orbitalB1
the extra repulsion between this pair of electrons in sulfur making one of them easier to removeB1
the electrons removed from P and S being in the same principal shell and subshell, with similar shielding, so pairing provides the explanation for the anomalyB1
Final answer: P is [Ne]3s2 3p3, with one electron in each 3p orbital; S is [Ne]3s2 3p4, with one paired orbital. Both lose a 3p electron with similar shielding. Repulsion within the pair in S makes an electron easier to remove despite the greater nuclear charge.
Mark scheme for Question 22 [6 marks]
Question 22[6 marks]
Answer or workingMarks
initial [H+] = Ka(0.200/0.150) = 2.32 x 10^-5 mol dm-3M1
initial pH = 4.63A1
HCl added = 0.0100 mol; H+ converts ethanoate to acidM1
new acid = 0.210 mol and ethanoate = 0.140 molA1
new [H+] = Ka(0.210/0.140), common volume cancelsM1
new pH = 4.58A1
Final answer: initial [H+] = Ka(0.200/0.150) = 2.32 x 10^-5 mol dm-3; initial pH = 4.63; HCl added = 0.0100 mol; H+ converts ethanoate to acid; new acid = 0.210 mol and ethanoate = 0.140 mol; new [H+] = Ka(0.210/0.140), common volume cancels; new pH = 4.58.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.