A Level Paper 6: Full A Level Review
Covers atomic structure, reaction kinetics, chemical equilibria, redox and electrode potentials, thermodynamics, acid-base chemistry and pH, organic chemistry and analytical techniques.
Questions
Question 1 [2 marks]
Thermodynamics
State what is meant by the term 'entropy', and explain why the entropy of a substance is greater as a gas than as a liquid.
Question 2 [2 marks]
Acids, Bases and pH
Calculate the pH of a solution of hydrochloric acid with a concentration of 0.0500 mol dm-3.
Question 3 [2 marks]
Reaction Kinetics
State the effect of increasing temperature on the rate of a chemical reaction, and explain this effect in terms of particle collisions.
Question 4 [3 marks]
Analytical Techniques
Describe a simple chemical test, including the observation, that could be used to distinguish between propanal and propanone.
Question 5 [3 marks]
Redox and Electrode Potentials
Write a balanced half-equation for the reduction of manganate(VII) ions, MnO4-, to Mn2+ ions in acidic solution.
Question 6 [3 marks]
Atomic Structure
Explain briefly why the first ionisation energy of neon is greater than that of every other element in Period 2.
Question 7 [3 marks]
Organic Chemistry
Ethylamine, C2H5NH2, is a stronger base than ammonia, NH3. Explain this difference in base strength.
Question 8 [3 marks]
Chemical Equilibria
Explain, in terms of the rates of the forward and reverse reactions, why a reversible reaction reaches dynamic equilibrium rather than going to completion, and why the concentrations of reactants and products remain constant once equilibrium is reached. Assume a closed system at constant temperature, initially containing only reactants.
Question 9 [2 marks]
Thermodynamics
Calculate the entropy change, deltaS, for the reaction CaCO3(s) -> CaO(s) + CO2(g),
given standard entropies (J K-1 mol-1): S(CaCO3) = 92.9, S(CaO) = 39.7, S(CO2) = 213.6.
Question 10 [2 marks]
Analytical Techniques
The infrared spectrum of an organic compound shows a moderate absorption at 3300-3500 cm-1 (weaker and sharper than a typical O-H absorption), but no absorption around 1700 cm-1.
Identify the functional group present, and suggest a class of compound consistent with this spectrum.
Question 11 [2 marks]
Redox and Electrode Potentials
Iron(II) ions are oxidised by acidified potassium manganate(VII) solution.
Using the half-equations Fe2+ -> Fe3+ + e- and MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O,
construct the overall ionic equation for the reaction.
Question 12 [3 marks]
Analytical Techniques
An infrared spectrum of an unknown organic compound shows a strong sharp absorption at 1735 cm-1 but no broad absorption in the range 2500-3300 cm-1.
Identify the functional group present, explain why a carboxylic acid can be ruled out, and suggest a class of compound (other than a carboxylic acid or alcohol) consistent with this spectrum.
Question 13 [3 marks]
Acids, Bases and pH
Calculate the pH of a 0.150 mol dm-3 solution of ethanoic acid, Ka = 1.74 x 10^-5 mol dm-3, at 298 K.
Question 14 [3 marks]
Redox and Electrode Potentials
Write a balanced half-equation for the oxidation of sulfur dioxide, SO2, to sulfate ions, SO4^2-, in aqueous solution.
Question 15 [3 marks]
Analytical Techniques
The mass spectrum of an unbranched ester of general formula CnH2nO2 shows a molecular ion peak at m/z = 88.
Deduce its molecular formula and suggest a possible structure.
Question 16 [3 marks]
Redox and Electrode Potentials
Using the standard electrode potentials E(Cu2+/Cu) = +0.34 V and E(Zn2+/Zn) = -0.76 V,
calculate the standard EMF of a cell formed from these two half-cells, and state which electrode is the positive terminal.
Question 17 [4 marks]
Acids, Bases and pH
Calculate the percentage dissociation of ethanoic acid in a 0.0500 mol dm-3 solution. (Ka = 1.74 x 10^-5 mol dm-3)
Question 18 [4 marks]
Chemical Equilibria
0.500 mol of PCl5 was placed in a 2.00 dm3 container and allowed to reach equilibrium: PCl5(g) <=> PCl3(g) + Cl2(g).
At equilibrium, 0.320 mol of PCl5 remained. Calculate the value of Kc, including units.
Question 19 [4 marks]
Reaction Kinetics
Explain, using the idea of adsorption, why a solid heterogeneous catalyst increases the rate of a gas-phase reaction occurring at its surface.
Question 20 [5 marks]
Atomic Structure
Explain why the first ionisation energy decreases down Group 1, from lithium to potassium, even though nuclear charge increases down the group.
Question 21 [5 marks]
Chemical Equilibria
1.00 mol of ethanoic acid was mixed with 1.00 mol of ethanol in a total volume of 1.00 dm3 and allowed to reach equilibrium:
CH3COOH(l) + C2H5OH(l) <=> CH3COOC2H5(l) + H2O(l)
At equilibrium, 0.667 mol of ethyl ethanoate had formed. Calculate the value of Kc for this reaction. Assume no ester or water was initially present and use the concentration-based model for a homogeneous liquid mixture.
Question 22 [3 marks]
Redox and Electrode Potentials
Manganese(II) ions react with manganate(VII) ions in neutral solution to form manganese(IV) oxide, MnO2, by comproportionation: a reaction in which two oxidation states of the same element react to give a single, intermediate oxidation state.
Using the half-equations MnO4- + 4H+ + 3e- -> MnO2 + 2H2O and Mn2+ + 2H2O -> MnO2 + 4H+ + 2e-, construct the overall balanced equation for this reaction.
Question 23 [5 marks]
Atomic Structure
Successive ionisation energies for element Y, in kJ/mol, are: 1000, 2260, 3390, 4540, 6990, 8500, 27100, 31670.
Deduce the group of the periodic table in which Y belongs, explaining your reasoning.
Question 24 [5 marks]
Organic Chemistry
Propanal reacts with hydrogen cyanide (generated in situ from potassium cyanide and dilute sulfuric acid) to form a hydroxynitrile.
Describe the mechanism of this reaction, naming the mechanism type, and give the structural formula of the organic product.
Question 25 [5 marks]
Thermodynamics
For the reaction 2Fe(s) + 1.5O2(g) -> Fe2O3(s), deltaH = -824 kJ/mol.
Standard entropies (J K-1 mol-1): S(Fe) = 27.3, S(O2) = 205.0, S(Fe2O3) = 87.4.
Calculate deltaS for the reaction, then calculate deltaG at 500 K, and comment on the feasibility of the reaction at this temperature.
Question 26 [6 marks]
Atomic Structure
Bromine has two naturally occurring isotopes, 79Br and 81Br. The relative atomic mass of bromine is 79.90.
Let x be the percentage abundance of 79Br. Set up and solve an equation to find the percentage abundance of each isotope.
Question 27 [6 marks]
Chemical Equilibria
0.400 mol of PCl5(g) is placed in a container and allowed to reach equilibrium at a constant total pressure of 200 kPa:
PCl5(g) <=> PCl3(g) + Cl2(g)
At equilibrium, 30.0% of the PCl5 has dissociated. Calculate the value of Kp for this reaction, including units.
Question 28 [6 marks]
Reaction Kinetics
The rate constant for a reaction is 2.50 x 10^-4 s-1 at 300 K and 3.60 x 10^-3 s-1 at 340 K.
Use the Arrhenius equation, ln k = -Ea / (RT) + ln A, to calculate the activation energy, Ea, in kJ mol-1.
(R = 8.31 J K-1 mol-1)
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| entropy describes the number of accessible arrangements of particles/energy or dispersal of energy | B1 |
| gas has greater freedom of movement and more accessible arrangements than liquid | B1 |
| Final answer: entropy describes the number of accessible arrangements of particles/energy or dispersal of energy; gas has greater freedom of movement and more accessible arrangements than liquid. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| full dissociation gives [H+] = 0.0500 mol dm-3 | M1 |
| pH = -log10(0.0500) = 1.30 | A1 |
| Final answer: full dissociation gives [H+] = 0.0500 mol dm-3; pH = -log10(0.0500) = 1.30. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| rate increases as temperature increases | B1 |
| particles having more kinetic energy, so a greater proportion have energy exceeding the activation energy, increasing the frequency of successful collisions | B1 |
| Final answer: Increasing temperature increases the reaction rate. Particles have more kinetic energy and a greater proportion have energy at or above the activation energy, so successful collisions occur more frequently. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| warm with Tollens' reagent | B1 |
| propanal gives silver mirror/deposit | B1 |
| propanone no change; accept Fehling/Benedict warmed, aldehyde brick-red precipitate and ketone no change, or acidified dichromate aldehyde orange to green and ketone no change | B1 |
| Final answer: warm with Tollens' reagent; propanal gives silver mirror/deposit; propanone no change; accept Fehling/Benedict warmed, aldehyde brick-red precipitate and ketone no change, or acidified dichromate aldehyde orange to green and ketone no change. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| balancing oxygen with 4H2O on the right | B1 |
| balancing hydrogen with 8H+ on the left | B1 |
| balancing charge with 5e- on the left, giving MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O | B1 |
| Final answer: balancing oxygen with 4H2O on the right; balancing hydrogen with 8H+ on the left; balancing charge with 5e- on the left, giving MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| neon having the greatest nuclear charge of any Period 2 element | B1 |
| neon having the smallest atomic radius in Period 2, with little change in shielding across the period | B1 |
| neon's outer electrons therefore being held most strongly, so removing one needs the most energy | B1 |
| Final answer: Neon has the greatest nuclear charge in Period 2. Shielding changes little because electrons enter the same principal shell, so neon has the smallest atomic radius and the strongest attraction to its outer electrons. Removing one requires the most energy. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| ethyl group donates electron density by positive inductive effect | B1 |
| nitrogen lone pair is more available than in ammonia | B1 |
| it accepts a proton more readily, giving stronger basicity | B1 |
| Final answer: ethyl group donates electron density by positive inductive effect; nitrogen lone pair is more available than in ammonia; it accepts a proton more readily, giving stronger basicity. | |
| Question 8[3 marks] | |
|---|---|
| Answer or working | Marks |
| the rate of the forward reaction decreasing (as reactant concentration falls) while the rate of the reverse reaction increases (as product concentration rises) as the reaction proceeds | B1 |
| equilibrium being reached when the rate of the forward reaction becomes equal to the rate of the reverse reaction | B1 |
| both reactions continuing to occur at equilibrium (it is dynamic), but since their rates are equal there is no further net change in the concentrations of reactants or products | B1 |
| Final answer: Initially only reactants are present. As reactants are consumed the forward rate decreases, while accumulating products allow the reverse reaction and its reverse rate increases. Before completion the rates become equal. Both reactions continue at equilibrium, but their equal rates give no net change in concentrations. | |
| Question 9[2 marks] | |
|---|---|
| Answer or working | Marks |
| deltaS = (39.7 + 213.6) - 92.9 | M1 |
| +160.4 J K-1 mol-1 | A1 |
| Final answer: deltaS = (39.7 + 213.6) - 92.9; +160.4 J K-1 mol-1. | |
| Question 10[2 marks] | |
|---|---|
| Answer or working | Marks |
| N-H bond suggested | B1 |
| amine consistent; primary or secondary amine acceptable, no unique type forced | B1 |
| Final answer: An N-H group is suggested, consistent with a primary or secondary amine. Absence of a carbonyl band argues against an amide. | |
| Question 11[2 marks] | |
|---|---|
| Answer or working | Marks |
| multiplying iron oxidation by 5 gives 5Fe2+ -> 5Fe3+ + 5e- | M1 |
| combining and cancelling electrons gives 5Fe2+ + MnO4- + 8H+ -> 5Fe3+ + Mn2+ + 4H2O | A1 |
| Final answer: multiplying iron oxidation by 5 gives 5Fe2+ -> 5Fe3+ + 5e-; combining and cancelling electrons gives 5Fe2+ + MnO4- + 8H+ -> 5Fe3+ + Mn2+ + 4H2O. | |
| Question 12[3 marks] | |
|---|---|
| Answer or working | Marks |
| strong 1735 cm-1 absorption indicates carbonyl C=O | B1 |
| absence of broad acid OH absorption rules out a typical carboxylic acid | B1 |
| ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class | B1 |
| Final answer: strong 1735 cm-1 absorption indicates carbonyl C=O; absence of broad acid OH absorption rules out a typical carboxylic acid; ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class. | |
| Question 13[3 marks] | |
|---|---|
| Answer or working | Marks |
| Ka = x^2/(0.150-x), or x approximately sqrt(Ka times 0.150) for small dissociation | M1 |
| [H+] approximately 1.62 x 10^-3 mol dm-3 (exact 1.6069 x 10^-3) | A1 |
| pH = 2.79 by either method | A1 |
| Final answer: Ka = x^2/(0.150-x), or x approximately sqrt(Ka times 0.150) for small dissociation; [H+] approximately 1.62 x 10^-3 mol dm-3 (exact 1.6069 x 10^-3); pH = 2.79 by either method. | |
| Question 14[3 marks] | |
|---|---|
| Answer or working | Marks |
| oxygen balanced with 2H2O on left (acidic form), or with 4OH- on left and 2H2O on right (alkaline form); award independently for oxygen balance even if hydrogen or charge is incorrect | B1 |
| hydrogen balanced with 4H+ on right (acidic form), or with 4OH- on left and 2H2O on right (alkaline form); award independently for hydrogen balance even if oxygen or charge is incorrect | B1 |
| charge balanced with 2e- on right; accept equivalent balanced alkaline half-equation SO2 + 4OH- -> SO4^2- + 2H2O + 2e- | B1 |
| Final answer: SO2 + 2H2O -> SO4^2- + 4H+ + 2e-. Two waters balance oxygen, four H+ balance hydrogen, and two electrons on the right balance charge (0 on each side). Equivalent alkaline form: SO2 + 4OH- -> SO4^2- + 2H2O + 2e-. | |
| Question 15[3 marks] | |
|---|---|
| Answer or working | Marks |
| Mr = 14n + 32, hence 14n + 32 = 88 | M1 |
| n = 4 so C4H8O2 | A1 |
| valid unbranched ester structural formula, e.g. CH3CH2COOCH3, CH3COOCH2CH3, or HCOOCH2CH2CH3 | B1 |
| Final answer: Mr = 14n + 32, hence 14n + 32 = 88; n = 4 so C4H8O2; valid unbranched ester structural formula, e.g. CH3CH2COOCH3, CH3COOCH2CH3, or HCOOCH2CH2CH3. | |
| Question 16[3 marks] | |
|---|---|
| Answer or working | Marks |
| EMF = 0.34 - (-0.76), selecting Cu reduction and Zn oxidation | M1 |
| +1.10 V | A1 |
| copper is the positive electrode where reduction occurs | B1 |
| Final answer: EMF = 0.34 - (-0.76), selecting Cu reduction and Zn oxidation; +1.10 V; copper is the positive electrode where reduction occurs. | |
| Question 17[4 marks] | |
|---|---|
| Answer or working | Marks |
| Ka = x^2/(0.0500-x); accept x approximately sqrt(Ka times 0.0500) | M1 |
| [H+] = 9.24 x 10^-4 exact, or 9.33 x 10^-4 approximate, mol dm-3 | A1 |
| percentage dissociation = x/0.0500 times 100 | M1 |
| 1.85% exact or 1.87% using small-dissociation approximation | A1 |
| Final answer: Ka = x^2/(0.0500-x); accept x approximately sqrt(Ka times 0.0500); [H+] = 9.24 x 10^-4 exact, or 9.33 x 10^-4 approximate, mol dm-3; percentage dissociation = x/0.0500 times 100; 1.85% exact or 1.87% using small-dissociation approximation. | |
| Question 18[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles reacted = 0.500 - 0.320 = 0.180 mol, so n(PCl3) = n(Cl2) = 0.180 mol | M1 |
| equilibrium concentrations [PCl5] = 0.160, [PCl3] = [Cl2] = 0.0900 mol dm-3 | M1 |
| Kc = [PCl3][Cl2] / [PCl5] = (0.0900 x 0.0900) / 0.160 | M1 |
| Kc = 0.0506 mol dm-3 | A1 |
| Final answer: PCl5 reacted = 0.500 - 0.320 = 0.180 mol, forming 0.180 mol each of PCl3 and Cl2. Dividing by 2.00 dm3 gives [PCl5] = 0.160 and [PCl3] = [Cl2] = 0.0900 mol dm-3. Kc = [PCl3][Cl2]/[PCl5] = 0.0900^2/0.160 = 0.0506 mol dm-3. | |
| Question 19[4 marks] | |
|---|---|
| Answer or working | Marks |
| gas molecules being adsorbed onto active sites on the surface of the solid catalyst | B1 |
| this adsorption weakening bonds within the adsorbed molecules and/or holding reacting molecules close together in a favourable orientation | B1 |
| the catalyst providing an alternative reaction pathway with a lower activation energy than the uncatalysed reaction | B1 |
| a greater proportion of collisions therefore having sufficient energy to react, increasing the rate, with products then desorbing from the surface | B1 |
| Final answer: Gas reactants adsorb onto active sites on the catalyst surface, weakening their bonds and bringing them together in favourable orientations. This provides an alternative pathway with lower activation energy, so a greater proportion can react successfully. Products desorb, freeing active sites. | |
| Question 20[5 marks] | |
|---|---|
| Answer or working | Marks |
| the outer electron occupying successively higher principal shells, for example Li 2s1 and K 4s1 | B1 |
| the outer electron in each successive element being in a shell further from the nucleus | B1 |
| the number of inner shells (shielding) increasing down the group | B1 |
| this increased distance and shielding outweighing the increase in nuclear charge | B1 |
| a correct concluding statement that the outer electron is therefore held less strongly and is easier to remove, so first ionisation energy decreases down the group | B1 |
| Final answer: The outer electron occupies successively higher principal shells, from Li 2s1 to K 4s1, and is further from the nucleus. More inner shells increase shielding. Increased distance and shielding outweigh the greater nuclear charge, weakening attraction to the outer electron so less energy is needed to remove it. | |
| Question 21[5 marks] | |
|---|---|
| Answer or working | Marks |
| moles of acid and ethanol remaining at equilibrium = 1.00 - 0.667 = 0.333 mol each | M1 |
| moles of ester and water at equilibrium both being 0.667 mol | M1 |
| Kc = [ester][water] / ([acid][ethanol]) | M1 |
| substituting Kc = (0.667 x 0.667) / (0.333 x 0.333) | M1 |
| Kc = 4.01 (no units); calculate from 0.667 and 0.333 without replacing them by exact two-thirds and one-third | A1 |
| Final answer: Acid and ethanol remaining = 1.00 - 0.667 = 0.333 mol each; ester and water = 0.667 mol each. In 1.00 dm3 these are also the concentrations in mol dm-3. Kc = [ester][water]/([acid][ethanol]) = (0.667 x 0.667) / (0.333 x 0.333) = 4.01 (no units). | |
| Question 22[3 marks] | |
|---|---|
| Answer or working | Marks |
| multiplying reduction half-equation by 2 and oxidation half-equation by 3 matches six electrons | M1 |
| adding and cancelling six electrons, excess H+ and water | M1 |
| 2MnO4- + 3Mn2+ + 2H2O -> 5MnO2 + 4H+; accept equivalent 2MnO4- + 3Mn2+ + 4OH- -> 5MnO2 + 2H2O | A1 |
| Final answer: multiplying reduction half-equation by 2 and oxidation half-equation by 3 matches six electrons; adding and cancelling six electrons, excess H+ and water; 2MnO4- + 3Mn2+ + 2H2O -> 5MnO2 + 4H+; accept equivalent 2MnO4- + 3Mn2+ + 4OH- -> 5MnO2 + 2H2O. | |
| Question 23[5 marks] | |
|---|---|
| Answer or working | Marks |
| identifying that the first six ionisation energies increase relatively steadily | B1 |
| identifying the large jump in ionisation energy between the 6th and 7th values | B1 |
| explaining this shows 6 electrons are removed relatively easily from an outer shell before the 7th electron is removed from a full inner shell | B1 |
| Y being in Group 16 (Group 6 in the main-group convention); accept either convention | B1 |
| explaining that removing an electron from a full inner shell needs much more energy because it is closer to the nucleus and experiences less shielding | B1 |
| Final answer: The first six ionisation energies rise relatively steadily, followed by a large jump from the sixth to seventh. Six electrons occupy the outer shell, giving Group 16 (Group 6 in the main-group convention). The seventh electron comes from a closer, less shielded inner shell and needs much more energy to remove. | |
| Question 24[5 marks] | |
|---|---|
| Answer or working | Marks |
| nucleophilic addition | B1 |
| CN- attacks carbonyl carbon using a lone pair on carbon | B1 |
| carbonyl pi electrons move to oxygen to form alkoxide | B1 |
| alkoxide is protonated by HCN/water to form OH | B1 |
| CH3CH2CH(OH)CN; accept correct curved-arrow mechanism for the verbal steps | B1 |
| Final answer: nucleophilic addition; CN- attacks carbonyl carbon using a lone pair on carbon; carbonyl pi electrons move to oxygen to form alkoxide; alkoxide is protonated by HCN/water to form OH; CH3CH2CH(OH)CN; accept correct curved-arrow mechanism for the verbal steps. | |
| Question 25[5 marks] | |
|---|---|
| Answer or working | Marks |
| deltaS = 87.4 - (2(27.3) + 1.5(205.0)) | M1 |
| -274.7 J K-1 mol-1 | A1 |
| deltaG = -824 - 500(-0.2747), using kJ units | M1 |
| -686.65 kJ mol-1, about -687 | A1 |
| feasible because deltaG < 0 | B1 |
| Final answer: deltaS = 87.4 - (2(27.3) + 1.5(205.0)); -274.7 J K-1 mol-1; deltaG = -824 - 500(-0.2747), using kJ units; -686.65 kJ mol-1, about -687; feasible because deltaG < 0. | |
| Question 26[6 marks] | |
|---|---|
| Answer or working | Marks |
| the percentage abundance of 81Br being (100 - x) | M1 |
| setting up 79x + 81(100 - x) = 7990 | M1 |
| expanding to 79x + 8100 - 81x = 7990 | M1 |
| simplifying to -2x = -110 | M1 |
| x = 55, so 79Br has 55% abundance | A1 |
| 81Br having 45% abundance | A1 |
| Final answer: 81Br abundance = (100 - x)%. 79x + 81(100 - x) = 7990; 79x + 8100 - 81x = 7990; -2x = -110, so x = 55. The abundances are 55% 79Br and 45% 81Br. | |
| Question 27[6 marks] | |
|---|---|
| Answer or working | Marks |
| moles dissociated = 0.400 x 0.300 = 0.120 mol | M1 |
| equilibrium moles: PCl5 = 0.280, PCl3 = 0.120, Cl2 = 0.120, total = 0.520 mol | M1 |
| mole fractions: PCl5 = 0.538, PCl3 = Cl2 = 0.231 | M1 |
| partial pressures: p(PCl5) = 108 kPa, p(PCl3) = p(Cl2) = 46.2 kPa | M1 |
| Kp = p(PCl3) x p(Cl2) / p(PCl5) | M1 |
| Kp = 19.8 kPa | A1 |
| Final answer: PCl5 dissociated = 0.400 x 0.300 = 0.120 mol. Equilibrium amounts PCl5:PCl3:Cl2 = 0.280:0.120:0.120 mol, total 0.520 mol. Mole fractions = 0.5384615:0.2307692:0.2307692; partial pressures = 107.6923:46.15385:46.15385 kPa. Kp = p(PCl3)p(Cl2)/p(PCl5) = 46.15385^2/107.6923 = 19.8 kPa. | |
| Question 28[6 marks] | |
|---|---|
| Answer or working | Marks |
| the two-point form ln(k2/k1) = (Ea/R) x (1/T1 - 1/T2) | M1 |
| ln(k2/k1) = ln(14.4) = 2.67 | M1 |
| (1/T1 - 1/T2) = 3.92 x 10^-4 K-1 | M1 |
| correctly rearranging and substituting to solve for Ea | M1 |
| Ea = 56500 J/mol | A1 |
| Ea = 56.5 kJ/mol | A1 |
| Final answer: ln(k2/k1) = (Ea/R)(1/T1 - 1/T2). ln(3.60 x 10^-3 / (2.50 x 10^-4)) = ln(14.4) = 2.667228...; 1/300 - 1/340 = 3.9215686 x 10^-4 K-1. Ea = 8.31 x ln(14.4)/(1/300 - 1/340) = 56519.9 J/mol = 56.5 kJ/mol. | |