AS Paper 1: Core Skills
Covers atomic structure, amount of substance calculations, bonding and structure, energetics and reaction kinetics.
Questions
Question 1 [2 marks]
Atomic Structure
Give the full electron configuration of a potassium ion, K+ (atomic number 19).
Question 2 [2 marks]
Bonding and Structure
State the number of bonding pairs and lone pairs of electrons around the central atom in a molecule of ammonia, NH3, and hence give its shape.
Question 3 [3 marks]
Reaction Kinetics
The rate equation for a reaction is rate = k[A][B]^2.
Calculate the factor by which the initial rate increases if the concentrations of both A and B are doubled.
Question 4 [3 marks]
Amount of Substance
Calculate the number of molecules present in 4.40 g of carbon dioxide, CO2 (Mr = 44.0).
The Avogadro constant is 6.02 x 10^23 mol-1.
Question 5 [4 marks]
Energetics
When the enthalpy of combustion of ethanol was measured experimentally using simple calorimetry, the value obtained, -723 kJ/mol, was considerably less exothermic than the Data book value of -1367 kJ/mol.
Suggest two reasons for this difference and explain how each makes the measured enthalpy less exothermic.
Question 6 [4 marks]
Bonding and Structure
Explain why the boiling point of hydrogen fluoride, HF, is significantly higher than that of hydrogen chloride, HCl, even though HCl has a greater molecular mass.
Question 7 [3 marks]
Reaction Kinetics
The rate equation for the reaction between P and Q, P + 2Q -> R, is found to be rate = k[P], even though the balanced equation shows 2 mol of Q reacting for every 1 mol of P.
Explain what this rate equation shows about the dependence on Q, suggest a simple mechanism consistent with it, and explain why orders cannot be predicted from the balanced chemical equation.
Question 8 [4 marks]
Bonding and Structure
State the structural requirements for hydrogen bonding to occur between two molecules, and use them to explain why methanol, CH3OH, can hydrogen bond with water but methane, CH4, cannot.
Question 9 [4 marks]
Amount of Substance
Calculate the total number of ions present in 5.85 g of sodium chloride, NaCl (Mr = 58.5).
The Avogadro constant is 6.02 x 10^23 mol-1.
Question 10 [5 marks]
Bonding and Structure
Deduce the shape and bond angle of a molecule of sulfur hexafluoride, SF6, explaining your answer in terms of electron pair repulsion theory.
Question 11 [3 marks]
Atomic Structure
In a time-of-flight mass spectrometer, an ion is accelerated to a velocity of 1.40 x 10^5 m/s.
Calculate the time taken for this ion to travel the length of the flight tube, 2.10 m, before reaching the detector.
Question 12 [5 marks]
Bonding and Structure
Explain why the boiling point of hydrogen iodide, HI, is higher than that of hydrogen bromide, HBr, even though neither molecule forms hydrogen bonds.
Question 13 [6 marks]
Atomic Structure
Bromine has two naturally occurring isotopes, 79Br and 81Br. The relative atomic mass of bromine is 79.90.
Let x be the percentage abundance of 79Br. Set up and solve an equation to find the percentage abundance of each isotope.
Question 14 [6 marks]
Reaction Kinetics
The initial rate of a reaction between A and B was measured in three experiments:
Experiment 1: [A] = 0.100 mol dm-3, [B] = 0.200 mol dm-3, rate = 4.00 x 10^-3 mol dm-3 s-1
Experiment 2: [A] = 0.200 mol dm-3, [B] = 0.200 mol dm-3, rate = 1.60 x 10^-2 mol dm-3 s-1
Experiment 3: [A] = 0.200 mol dm-3, [B] = 0.400 mol dm-3, rate = 1.60 x 10^-2 mol dm-3 s-1
Determine the rate equation and the value of k, and hence calculate the initial rate when [A] = 0.300 mol dm-3.
Question 15 [6 marks]
Amount of Substance
A 0.500 g impure sample of calcium carbonate is reacted with 50.0 cm3 of 0.200 mol dm-3 hydrochloric acid, an excess. The impurities do not react with hydrochloric acid.
CaCO3 + 2HCl -> CaCl2 + H2O + CO2
The unreacted acid required 24.60 cm3 of 0.100 mol dm-3 sodium hydroxide solution to neutralise it exactly (HCl + NaOH -> NaCl + H2O). Calculate the percentage by mass of CaCO3 in the sample. (Mr of CaCO3 = 100.0)
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| the filled core 1s2 2s2 2p6 3s2 | B1 |
| 3p6 with no 4s electron, giving 18 electrons in total; no separate removal explanation required | B1 |
| Final answer: 1s2 2s2 2p6 3s2 3p6 | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| 3 bonding pairs and 1 lone pair | B1 |
| trigonal pyramidal shape | B1 |
| Final answer: 3 bonding pairs, 1 lone pair; trigonal pyramidal | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| the factor from doubling [A] being 2^1 = 2 | M1 |
| the factor from doubling [B] being 2^2 = 4 | M1 |
| the overall factor being 2 x 4 = 8 | A1 |
| Final answer: Doubling [A] contributes a factor 2^1 = 2; doubling [B] contributes 2^2 = 4. The combined rate factor is 2 x 4 = 8. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| n = mass / Mr = 4.40 / 44.0 = 0.100 mol | M1 |
| multiplying moles by the Avogadro constant | M1 |
| 6.02 x 10^22 molecules | A1 |
| Final answer: n(CO2) = 4.40/44.0 = 0.100 mol; molecules = 0.100 x 6.02 x 10^23 = 6.02 x 10^22. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| one valid cause: heat loss to surroundings or apparatus, incomplete combustion, or fuel evaporation | B1 |
| explaining the effect of that cause: less heat reaches the water, incomplete combustion releases less energy per mole, or evaporated fuel is included in the mass loss without releasing heat | B1 |
| a second distinct valid cause from heat loss to surroundings or apparatus, incomplete combustion, or fuel evaporation | B1 |
| explaining the effect of the second cause; award at most 2 marks for each cause and its effect, and do not credit heat loss to surroundings and apparatus as two distinct causes | B1 |
| Final answer: Heat loss to the surroundings or apparatus reduces the heat reaching the water and its temperature rise. Incomplete combustion releases less heat per mole than complete combustion. Alternatively, evaporated fuel contributes to the measured mass loss but releases no heat to the water. | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| HF molecules being held together by hydrogen bonding | B1 |
| hydrogen bonding arising from a lone pair on the highly electronegative F atom attracting the H atom of a neighbouring molecule | B1 |
| HCl molecules interacting through permanent dipole-dipole and London dispersion forces, without hydrogen bonding | B1 |
| more energy being needed to overcome the hydrogen bonds in HF than the weaker forces in HCl | B1 |
| Final answer: HF molecules form hydrogen bonds: a lone pair on highly electronegative F attracts the partially positive H of a neighbouring HF molecule. HCl has permanent dipole-dipole and London forces but no hydrogen bonding. Overcoming the stronger intermolecular attractions in HF requires more energy, giving a higher boiling point. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| zero order with respect to Q under the conditions studied: changing [Q] does not change the rate | B1 |
| a possible mechanism with a slow step involving P followed by faster steps involving Q; the rate equation alone does not prove Q is absent from every possible rate-determining process | B1 |
| orders being determined experimentally because the overall balanced equation gives stoichiometry but does not specify elementary steps or the rate-determining step | B1 |
| Final answer: The reaction is zero order in Q under the conditions studied. A slow step involving P followed by faster reaction with Q is consistent with rate = k[P], but the mechanism is not uniquely determined. Orders must be measured experimentally because overall stoichiometry does not specify elementary steps or which step is slow. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| a hydrogen atom covalently bonded directly to N, O or F as the hydrogen-bond donor | B1 |
| a lone pair on N, O or F of the neighbouring molecule as the hydrogen-bond acceptor | B1 |
| methanol and water having O-H donor bonds and oxygen lone pairs, allowing hydrogen bonding between them | B1 |
| methane lacking both an H-N/O/F donor bond and a suitable lone-pair acceptor, so it cannot hydrogen bond with water | B1 |
| Final answer: Hydrogen bonding requires H bonded directly to N, O or F, producing a strong dipole with a sufficiently positive H, and a lone pair on N, O or F of another molecule. Methanol and water both have O-H donor bonds and oxygen lone pairs, so they can hydrogen bond with each other. Methane has neither such an H nor an appropriate lone pair, so it cannot. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| n(NaCl) = mass / Mr = 5.85 / 58.5 | M1 |
| n(NaCl) = 0.100 mol | A1 |
| each formula unit of NaCl containing 2 ions (1 Na+ and 1 Cl-), so n(ions) = 0.200 mol | M1 |
| number of ions = 0.200 x 6.02 x 10^23 = 1.20 x 10^23 | A1 |
| Final answer: n(NaCl) = 5.85/58.5 = 0.100 mol. Each formula unit has one Na+ and one Cl-, so n(ions) = 0.200 mol. Number of ions = 0.200 x 6.02 x 10^23 = 1.20 x 10^23. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| 6 bonding pairs and no lone pairs around the central sulfur atom | B1 |
| the electron pairs repelling each other as far apart as possible | B1 |
| an octahedral shape | B1 |
| a bond angle of 90 degrees | B1 |
| identifying the 180 degree angle between opposite S-F bonds; adjacent bonds are at 90 degrees, so not all bond angles are equal | B1 |
| Final answer: Six bonding pairs and no lone pairs repel as far apart as possible, giving an octahedral shape; adjacent F-S-F angles are 90 degrees and opposite angles are 180 degrees. | |
| Question 11[3 marks] | |
|---|---|
| Answer or working | Marks |
| time = distance / velocity | M1 |
| substituting 2.10 / (1.40 x 10^5) | M1 |
| 1.50 x 10^-5 s | A1 |
| Final answer: t = distance / velocity = 2.10 / (1.40 x 10^5) = 1.50 x 10^-5 s. | |
| Question 12[5 marks] | |
|---|---|
| Answer or working | Marks |
| both HI and HBr being simple covalent molecules held together only by van der Waals (induced dipole-induced dipole) forces and weak permanent dipole-dipole forces | B1 |
| distinguishing the origin of London forces: fluctuations in electron density create instantaneous dipoles that induce dipoles in neighbouring molecules | B1 |
| HI having more electrons than HBr | B1 |
| HI therefore having a larger, more easily distorted electron cloud, giving stronger van der Waals forces between molecules | B1 |
| more energy being needed to overcome the stronger van der Waals forces in HI, giving it the higher boiling point | B1 |
| Final answer: HI and HBr are simple molecular substances with London forces and permanent dipole-dipole attractions. Fluctuating electron density creates instantaneous dipoles that induce dipoles in neighbouring molecules. HI has more electrons and a larger, more easily distorted electron cloud, so its London forces are stronger. More energy is needed to separate its molecules, giving the higher boiling point. | |
| Question 13[6 marks] | |
|---|---|
| Answer or working | Marks |
| the percentage abundance of 81Br being (100 - x) | M1 |
| setting up 79x + 81(100 - x) = 7990 | M1 |
| expanding to 79x + 8100 - 81x = 7990 | M1 |
| simplifying to -2x = -110 | M1 |
| x = 55, so 79Br has 55% abundance | A1 |
| 81Br having 45% abundance | A1 |
| Final answer: 81Br abundance = (100 - x)%. 79x + 81(100 - x) = 7990; 79x + 8100 - 81x = 7990; -2x = -110, so x = 55. The abundances are 55% 79Br and 45% 81Br. | |
| Question 14[6 marks] | |
|---|---|
| Answer or working | Marks |
| comparing experiments 1 and 2: [A] doubles while [B] is constant, and rate increases by a factor of 4 | M1 |
| order with respect to A = 2 | A1 |
| comparing experiments 2 and 3: [B] doubles while [A] is constant, and rate is unchanged | M1 |
| order with respect to B = 0, so rate = k[A]^2 | A1 |
| k = rate / [A]^2 = 4.00 x 10^-3 / (0.100)^2 = 0.400 mol-1 dm3 s-1 | M1 |
| predicted rate when [A] = 0.300 mol dm-3: rate = 0.400 x (0.300)^2 = 0.0360 mol dm-3 s-1 | A1 |
| Final answer: Experiments 1 to 2: doubling [A] at constant [B] quadruples rate, so order in A = 2. Experiments 2 to 3: doubling [B] at constant [A] leaves rate unchanged, so order in B = 0. rate = k[A]^2; k = 4.00 x 10^-3/0.100^2 = 0.400 mol-1 dm3 s-1. At [A] = 0.300 mol dm-3, rate = 0.400 x 0.300^2 = 0.0360 mol dm-3 s-1. | |
| Question 15[6 marks] | |
|---|---|
| Answer or working | Marks |
| n(HCl) added in total = 0.200 x (50.0/1000) = 0.0100 mol | M1 |
| n(NaOH) = n(HCl unreacted) = 0.100 x (24.60/1000) = 0.00246 mol | M1 |
| n(HCl reacted with CaCO3) = 0.0100 - 0.00246 = 0.00754 mol | M1 |
| n(CaCO3) = n(HCl reacted) / 2 = 0.00377 mol | M1 |
| mass of CaCO3 = 0.00377 x 100.0 = 0.377 g | A1 |
| percentage by mass = (0.377 / 0.500) x 100 = 75.4% | A1 |
| Final answer: With impurities unreactive towards HCl: initial n(HCl) = 0.200 x 0.0500 = 0.0100 mol; excess n(HCl) = n(NaOH) = 0.100 x 0.02460 = 0.00246 mol. CaCO3 consumes 0.0100 - 0.00246 = 0.00754 mol HCl, so n(CaCO3) = 0.00754/2 = 0.00377 mol. Mass = 0.00377 x 100.0 = 0.377 g; purity = 0.377/0.500 x 100 = 75.4%. | |