AS Paper 6: Full AS Review
Covers atomic structure, amount of substance calculations, bonding and structure, energetics, reaction kinetics, chemical equilibria, periodicity and analytical techniques.
Questions
Question 1 [2 marks]
Chemical Equilibria
State the effect of adding a catalyst on the position of equilibrium and on the value of Kc for a reversible reaction, explaining your answer.
Question 2 [2 marks]
Periodicity
Chlorine water is added to a colourless solution of potassium bromide. State what would be observed, and write an ionic equation for the reaction that occurs.
Question 3 [2 marks]
Reaction Kinetics
State the effect of increasing temperature on the rate of a chemical reaction, and explain this effect in terms of particle collisions.
Question 4 [3 marks]
Analytical Techniques
Describe a simple chemical test, including the observation, that could be used to distinguish between propanal and propanone.
Question 5 [3 marks]
Amount of Substance
A sample of anhydrous copper(II) sulfate, CuSO4 (Mr = 159.5), has a mass of 3.19 g.
Calculate the amount, in mol, of CuSO4 present, and hence the amount, in mol, of Cu2+ ions in the sample.
Question 6 [3 marks]
Atomic Structure
Iron has atomic number 26. Give the full electron configuration of the Fe2+ ion, and explain why the 4s electrons are removed before the 3d electrons when the ion forms.
Question 7 [3 marks]
Bonding and Structure
Using the idea of electronegativity, explain why the C-F bond is more polar than the C-Cl bond, even though both fluorine and chlorine are more electronegative than carbon.
Question 8 [4 marks]
Energetics
In an experiment, 50.0 g of an unknown metal absorbed 450 J of energy and its temperature rose by 10.0 deg C.
Calculate the specific heat capacity of the metal, and suggest, giving a reason, whether the metal is more likely to be aluminium (c = 0.900 J g-1 K-1) or iron (c = 0.450 J g-1 K-1).
Question 9 [3 marks]
Analytical Techniques
An infrared spectrum of an unknown organic compound shows a strong sharp absorption at 1735 cm-1 but no broad absorption in the range 2500-3300 cm-1.
Identify the functional group present, explain why a carboxylic acid can be ruled out, and suggest a class of compound (other than a carboxylic acid or alcohol) consistent with this spectrum.
Question 10 [4 marks]
Chemical Equilibria
Solid ammonium carbamate decomposes on heating: NH2COONH4(s) <=> 2NH3(g) + CO2(g).
Write the expression for Kc for this equilibrium, explaining why solid ammonium carbamate does not appear in it. If, at equilibrium, [NH3] = 0.400 mol dm-3 and [CO2] = 0.200 mol dm-3, calculate the value of Kc, including units.
Question 11 [4 marks]
Reaction Kinetics
A reaction has an overall order of 3. The rate equation is second order with respect to reactant P.
Deduce the order with respect to the only other reactant, Q, and determine the units of the rate constant k, given [P] and [Q] are both measured in mol dm-3 and rate in mol dm-3 s-1.
Question 12 [4 marks]
Energetics
Use the mean bond enthalpies below to calculate the enthalpy change for the addition reaction C2H4(g) + HBr(g) -> C2H5Br(g).
Bond enthalpies (kJ/mol): C=C = 612, C-C = 348, H-Br = 366, C-H = 413, C-Br = 276. State whether the reaction is exothermic or endothermic, giving a reason.
Question 13 [4 marks]
Atomic Structure
In a time-of-flight mass spectrometer, ions of magnesium-24 are accelerated to a kinetic energy of 5.60 x 10^-16 J.
The mass of one Mg-24 ion is 3.98 x 10^-26 kg. Using KE = 1/2 m v^2, calculate the velocity of the ion.
Question 14 [4 marks]
Chemical Equilibria
For the equilibrium H2(g) + I2(g) <=> 2HI(g), Kc = 50.0 (no units) at a certain temperature.
At equilibrium, [H2] = 0.500 mol dm-3 and [HI] = 5.00 mol dm-3. Calculate the equilibrium concentration of I2.
Question 15 [4 marks]
Periodicity
When solid sodium chloride is warmed with concentrated sulfuric acid, only steamy fumes of hydrogen chloride are produced. When solid sodium iodide is warmed with concentrated sulfuric acid, hydrogen iodide forms but is then oxidised as sulfuric acid is reduced, giving a mixture of products including hydrogen sulfide gas and a black solid.
Explain, in terms of the reducing power of the halide ions, why iodide ions react differently from chloride ions with concentrated sulfuric acid.
Question 16 [4 marks]
Chemical Equilibria
0.500 mol of PCl5 was placed in a 2.00 dm3 container and allowed to reach equilibrium: PCl5(g) <=> PCl3(g) + Cl2(g).
At equilibrium, 0.320 mol of PCl5 remained. Calculate the value of Kc, including units.
Question 17 [5 marks]
Bonding and Structure
Deduce the shape and bond angle of a molecule of sulfur hexafluoride, SF6, explaining your answer in terms of electron pair repulsion theory.
Question 18 [5 marks]
Amount of Substance
Complete combustion of 2.20 g of a hydrocarbon produced 6.60 g of carbon dioxide and 3.60 g of water.
Determine the empirical formula of the hydrocarbon. (Ar: C = 12.0, H = 1.0, O = 16.0)
Question 19 [4 marks]
Periodicity
Explain why the thermal stability of Group 2 carbonates increases down the group, in terms of ionic radius and polarising power.
Question 20 [5 marks]
Energetics
Use a Born-Haber cycle and the data below to calculate the electron affinity of chlorine.
Enthalpy of formation of NaCl(s) = -411 kJ/mol; enthalpy of atomisation of Na(s) = +107 kJ/mol; 1st ionisation energy of Na = +496 kJ/mol; enthalpy of atomisation of Cl2(g), per mole of Cl atoms, = +122 kJ/mol; lattice enthalpy of formation of NaCl(s) = -787 kJ/mol.
Question 21 [5 marks]
Periodicity
Chlorine gas is added to water at water treatment plants.
Write an equation for the reaction of chlorine with water, and use oxidation states to show that this is a disproportionation reaction.
Suggest one benefit and one drawback of treating water with chlorine in this way.
Question 22 [5 marks]
Analytical Techniques
An organic compound W has molecular formula C3H9N. Its infrared spectrum shows two moderate absorptions close together at 3300 and 3380 cm-1, but no absorption near 1700 cm-1.
Its 1H NMR spectrum shows a doublet (relative area 6), a broad signal that disappears on adding D2O (relative area 2), and a septet (relative area 1).
Deduce the structure of W, explaining your reasoning.
Question 23 [6 marks]
Energetics
Use a Born-Haber cycle and the data below to calculate the lattice enthalpy of formation of magnesium chloride, MgCl2.
Enthalpy of formation of MgCl2(s) = -641 kJ/mol; enthalpy of atomisation of Mg(s) = +148 kJ/mol;
1st ionisation energy of Mg = +738 kJ/mol; 2nd ionisation energy of Mg = +1451 kJ/mol;
enthalpy of atomisation of Cl2(g), per mole of Cl atoms, = +122 kJ/mol; electron affinity of Cl = -349 kJ/mol (per mole of Cl).
Question 24 [6 marks]
Atomic Structure
Explain why the first ionisation energy of sulfur is lower than that of phosphorus, even though sulfur has a greater nuclear charge. Use electron configurations in your answer.
Question 25 [6 marks]
Energetics
Use a Hess's law cycle and the data below to calculate the enthalpy of solution of sodium chloride, NaCl.
Lattice enthalpy of formation of NaCl(s) = -787 kJ/mol; enthalpy of hydration of Na+(g) = -406 kJ/mol; enthalpy of hydration of Cl-(g) = -364 kJ/mol. State whether dissolution is exothermic or endothermic, giving a reason.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| no effect on the position of equilibrium or on the value of Kc | B1 |
| a catalyst providing faster forward and reverse pathways without changing their equilibrium balance at fixed temperature, so equilibrium is reached faster but its position and Kc are unchanged | B1 |
| Final answer: No change to the equilibrium position or Kc at fixed temperature. A catalyst accelerates both directions without changing their equilibrium balance, so equilibrium is reached faster. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| solution becomes orange/brown as bromine forms | B1 |
| Cl2 + 2Br- -> 2Cl- + Br2 | B1 |
| Final answer: solution becomes orange/brown as bromine forms; Cl2 + 2Br- -> 2Cl- + Br2. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| rate increases as temperature increases | B1 |
| particles having more kinetic energy, so a greater proportion have energy exceeding the activation energy, increasing the frequency of successful collisions | B1 |
| Final answer: Increasing temperature increases the reaction rate. Particles have more kinetic energy and a greater proportion have energy at or above the activation energy, so successful collisions occur more frequently. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| warm with Tollens' reagent | B1 |
| propanal gives silver mirror/deposit | B1 |
| propanone no change; accept Fehling/Benedict warmed, aldehyde brick-red precipitate and ketone no change, or acidified dichromate aldehyde orange to green and ketone no change | B1 |
| Final answer: warm with Tollens' reagent; propanal gives silver mirror/deposit; propanone no change; accept Fehling/Benedict warmed, aldehyde brick-red precipitate and ketone no change, or acidified dichromate aldehyde orange to green and ketone no change. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| n(CuSO4) = mass / Mr = 3.19 / 159.5 | M1 |
| n(CuSO4) = 0.0200 mol | A1 |
| n(Cu2+) = 0.0200 mol, since each formula unit of CuSO4 contains one Cu2+ ion | B1 |
| Final answer: n(CuSO4) = 3.19/159.5 = 0.0200 mol. There is one Cu2+ per formula unit, so n(Cu2+) = 0.0200 mol. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| the filled core 1s2 2s2 2p6 3s2 3p6 in Fe2+ | B1 |
| 3d6 with no 4s electrons, giving 24 electrons in Fe2+; no separate neutral-atom configuration required | B1 |
| explaining that once electrons occupy 3d, the 4s subshell becomes higher in energy than 3d, so 4s electrons are lost first | B1 |
| Final answer: Fe: [Ar]3d6 4s2; Fe2+: 1s2 2s2 2p6 3s2 3p6 3d6. In the occupied atom the 4s electrons are higher in energy than the 3d electrons and are removed first. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| fluorine having a greater electronegativity than chlorine | B1 |
| the electronegativity difference between C and F therefore being greater than the difference between C and Cl | B1 |
| a greater electronegativity difference producing a greater separation of charge, so the C-F bond is more polar than the C-Cl bond | B1 |
| Final answer: F is more electronegative than Cl, so the electronegativity difference between C and F is greater than between C and Cl. C-F therefore has greater separation of partial charge and greater bond polarity. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| c = q / (m x deltaT) | M1 |
| substituting 450 / (50.0 x 10.0) | M1 |
| c = 0.900 J g-1 K-1 | A1 |
| identifying the metal as aluminium, since the calculated specific heat capacity matches aluminium's value | B1 |
| Final answer: c = q/(m deltaT) = 450/(50.0 x 10.0) = 0.900 J g-1 K-1. Aluminium is more likely because its specific heat capacity matches the calculated value. | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| strong 1735 cm-1 absorption indicates carbonyl C=O | B1 |
| absence of broad acid OH absorption rules out a typical carboxylic acid | B1 |
| ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class | B1 |
| Final answer: strong 1735 cm-1 absorption indicates carbonyl C=O; absence of broad acid OH absorption rules out a typical carboxylic acid; ester, aldehyde or ketone is a plausible class; these data do not prove the absence of every possible OH bond or uniquely identify a class. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| solid ammonium carbamate not appearing in the Kc expression, because the concentration of a pure solid is constant and is incorporated into the value of Kc itself | B1 |
| Kc = [NH3]^2[CO2] | B1 |
| substituting (0.400)^2 x 0.200 | M1 |
| Kc = 0.0320 mol3 dm-9 | A1 |
| Final answer: The pure solid is omitted because its concentration is constant and incorporated into Kc. Kc = [NH3]^2[CO2] = 0.400^2 x 0.200 = 0.0320 mol3 dm-9. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| order with respect to Q = 3 - 2 = 1, since the overall order is the sum of the individual orders | B1 |
| units of k found from k = rate / ([P]^2[Q]) | M1 |
| substituting units: (mol dm-3 s-1) / (mol2 dm-6 x mol dm-3) | M1 |
| units of k = mol-2 dm6 s-1 | A1 |
| Final answer: Order in Q = overall order - order in P = 3 - 2 = 1. k = rate/([P]^2[Q]); units = (mol dm-3 s-1)/(mol2 dm-6 x mol dm-3) = mol-2 dm6 s-1. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| bonds broken = 1(C=C) + 1(H-Br) = 612 + 366 = 978 | M1 |
| bonds formed = 1(C-C) + 1(C-H) + 1(C-Br) = 348 + 413 + 276 = 1037 | M1 |
| deltaH = 978 - 1037 = -59 kJ/mol | A1 |
| stating the reaction is exothermic, since deltaH is negative | B1 |
| Final answer: Bonds broken = C=C + H-Br = 612 + 366 = 978 kJ/mol. Bonds formed = C-C + C-H + C-Br = 348 + 413 + 276 = 1037 kJ/mol. deltaH = 978 - 1037 = -59 kJ/mol; exothermic because deltaH is negative. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| rearranging to v = sqrt(2 x KE / m) | M1 |
| correct substitution of KE and m | M1 |
| v = 1.68 x 10^5 | A1 |
| correct unit m/s (m s^-1) | A1 |
| Final answer: v = sqrt(2KE/m) = sqrt(2 x 5.60 x 10^-16 / (3.98 x 10^-26)) = 1.68 x 10^5 m/s. | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| rearranging Kc = [HI]^2 / ([H2][I2]) to make [I2] the subject: [I2] = [HI]^2 / (Kc x [H2]) | M1 |
| substituting (5.00)^2 / (50.0 x 0.500) | M1 |
| [I2] = 25.0 / 25.0 | A1 |
| [I2] = 1.00 mol dm-3 | A1 |
| Final answer: Rearranging Kc = [HI]^2/([H2][I2]) gives [I2] = [HI]^2/(Kc x [H2]) = 5.00^2/(50.0 x 0.500) = 25.0/25.0 = 1.00 mol dm-3. | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| Cl- is too weak a reducing agent to reduce sulfuric acid, so HCl forms by acid-base reaction | B1 |
| I- is larger/more shielded and loses electrons more readily, making it a stronger reducing agent | B1 |
| I- reduces sulfur in H2SO4 from +6 to lower states including -2 in H2S | B1 |
| I- is itself oxidised from -1 to 0 in dark iodine; HI is oxidised, not reduced | B1 |
| Final answer: Cl- is too weak a reducing agent to reduce sulfuric acid, so HCl forms by acid-base reaction; I- is larger/more shielded and loses electrons more readily, making it a stronger reducing agent; I- reduces sulfur in H2SO4 from +6 to lower states including -2 in H2S; I- is itself oxidised from -1 to 0 in dark iodine; HI is oxidised, not reduced. | |
| Question 16[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles reacted = 0.500 - 0.320 = 0.180 mol, so n(PCl3) = n(Cl2) = 0.180 mol | M1 |
| equilibrium concentrations [PCl5] = 0.160, [PCl3] = [Cl2] = 0.0900 mol dm-3 | M1 |
| Kc = [PCl3][Cl2] / [PCl5] = (0.0900 x 0.0900) / 0.160 | M1 |
| Kc = 0.0506 mol dm-3 | A1 |
| Final answer: PCl5 reacted = 0.500 - 0.320 = 0.180 mol, forming 0.180 mol each of PCl3 and Cl2. Dividing by 2.00 dm3 gives [PCl5] = 0.160 and [PCl3] = [Cl2] = 0.0900 mol dm-3. Kc = [PCl3][Cl2]/[PCl5] = 0.0900^2/0.160 = 0.0506 mol dm-3. | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| 6 bonding pairs and no lone pairs around the central sulfur atom | B1 |
| the electron pairs repelling each other as far apart as possible | B1 |
| an octahedral shape | B1 |
| a bond angle of 90 degrees | B1 |
| identifying the 180 degree angle between opposite S-F bonds; adjacent bonds are at 90 degrees, so not all bond angles are equal | B1 |
| Final answer: Six bonding pairs and no lone pairs repel as far apart as possible, giving an octahedral shape; adjacent F-S-F angles are 90 degrees and opposite angles are 180 degrees. | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| mol CO2 = 6.60 / 44.0 = 0.150 mol, equal to mol C | M1 |
| mol H2O = 3.60 / 18.0 = 0.200 mol, so mol H = 0.400 mol | M1 |
| the ratio C : H = 0.150 : 0.400, dividing by 0.150 to give 1 : 2.67 | M1 |
| multiplying by 3 to give the simplest whole-number ratio 3 : 8 | A1 |
| empirical formula C3H8 | A1 |
| Final answer: n(C) = n(CO2) = 6.60/44.0 = 0.150 mol. n(H2O) = 3.60/18.0 = 0.200 mol, so n(H) = 0.400 mol. C:H = 0.150:0.400 = 1:2.6667; multiplying by 3 gives 3:8, hence C3H8. | |
| Question 19[4 marks] | |
|---|---|
| Answer or working | Marks |
| cation radius increases down Group 2 | B1 |
| same +2 charge spread over larger radius gives lower charge density and polarising power | B1 |
| carbonate electron cloud is distorted less, so C-O bonds are weakened less | B1 |
| more heat is required for decomposition, giving greater thermal stability | B1 |
| Final answer: cation radius increases down Group 2; same +2 charge spread over larger radius gives lower charge density and polarising power; carbonate electron cloud is distorted less, so C-O bonds are weakened less; more heat is required for decomposition, giving greater thermal stability. | |
| Question 20[5 marks] | |
|---|---|
| Answer or working | Marks |
| setting up a correct Born-Haber cycle relating deltaHf to the sum of the other enthalpy terms, including the electron affinity | M1 |
| combining the known terms: atomisation of Na + 1st IE of Na + atomisation of Cl + lattice enthalpy = 107 + 496 + 122 + (-787) | M1 |
| this sum equalling -62 kJ/mol | A1 |
| rearranging deltaHf = -62 + EA(Cl) to give EA(Cl) = deltaHf - (-62) | M1 |
| EA(Cl) = -411 - (-62) = -349 kJ/mol | A1 |
| Final answer: Born-Haber cycle: deltaHf = atomisation(Na) + IE1(Na) + atomisation(Cl) + EA(Cl) + lattice formation. Known terms sum to 107 + 496 + 122 - 787 = -62 kJ/mol. Hence -411 = -62 + EA(Cl); EA(Cl) = -411 - (-62) = -349 kJ/mol. | |
| Question 21[5 marks] | |
|---|---|
| Answer or working | Marks |
| Cl2 + H2O <=> HCl + HOCl | B1 |
| Cl begins at 0 | B1 |
| Cl changes to -1 in HCl and +1 in HOCl, hence simultaneous reduction and oxidation | B1 |
| chlorination kills harmful microorganisms | B1 |
| valid drawback such as toxic chlorinated organic byproducts, harmful chlorine at excessive concentration, or unpleasant taste | B1 |
| Final answer: Cl2 + H2O <=> HCl + HOCl; Cl begins at 0; Cl changes to -1 in HCl and +1 in HOCl, hence simultaneous reduction and oxidation; chlorination kills harmful microorganisms; valid drawback such as toxic chlorinated organic byproducts, harmful chlorine at excessive concentration, or unpleasant taste. | |
| Question 22[5 marks] | |
|---|---|
| Answer or working | Marks |
| two N-H stretches indicate primary amine | B1 |
| D2O-exchangeable2H signal is NH2 | B1 |
| 6H doublet is two equivalent methyl groups, each split by one CH proton | B1 |
| 1H septet is CH split by six equivalent methyl protons | B1 |
| (CH3)2CHNH2, propan-2-amine, matches C3H9N | B1 |
| Final answer: two N-H stretches indicate primary amine; D2O-exchangeable2H signal is NH2; 6H doublet is two equivalent methyl groups, each split by one CH proton; 1H septet is CH split by six equivalent methyl protons; (CH3)2CHNH2, propan-2-amine, matches C3H9N. | |
| Question 23[6 marks] | |
|---|---|
| Answer or working | Marks |
| setting up a correct Hess's law cycle relating deltaHf to the sum of the other enthalpy terms plus the lattice enthalpy | M1 |
| using 2 x atomisation of Cl = 2 x 122 = 244 kJ/mol | M1 |
| using 2 x electron affinity of Cl = 2 x (-349) = -698 kJ/mol | M1 |
| atomisation of Mg + 1st IE + 2nd IE = 148 + 738 + 1451 = 2337 kJ/mol | M1 |
| combining all five known terms to give a total of 1883 kJ/mol | A1 |
| lattice enthalpy = -641 - 1883 = -2524 kJ/mol | A1 |
| Final answer: Born-Haber cycle: deltaHf = atomisation(Mg) + IE1 + IE2 + 2 atomisation(Cl) + 2 EA(Cl) + lattice formation. The Mg terms total 148 + 738 + 1451 = 2337; chlorine atomisation is 244 and electron affinities total -698 kJ/mol. Known terms sum to 2337 + 244 - 698 = 1883 kJ/mol, so lattice formation = -641 - 1883 = -2524 kJ/mol. | |
| Question 24[6 marks] | |
|---|---|
| Answer or working | Marks |
| the electron configuration of phosphorus, [Ne]3s2 3p3 | B1 |
| the electron configuration of sulfur, [Ne]3s2 3p4 | B1 |
| phosphorus having a half-filled 3p subshell, with one electron in each of the three 3p orbitals | B1 |
| sulfur having two electrons paired together in one 3p orbital | B1 |
| the extra repulsion between this pair of electrons in sulfur making one of them easier to remove | B1 |
| the electrons removed from P and S being in the same principal shell and subshell, with similar shielding, so pairing provides the explanation for the anomaly | B1 |
| Final answer: P is [Ne]3s2 3p3, with one electron in each 3p orbital; S is [Ne]3s2 3p4, with one paired orbital. Both lose a 3p electron with similar shielding. Repulsion within the pair in S makes an electron easier to remove despite the greater nuclear charge. | |
| Question 25[6 marks] | |
|---|---|
| Answer or working | Marks |
| reversing lattice formation: NaCl(s) -> Na+(g) + Cl-(g) | M1 |
| lattice dissociation enthalpy = +787 kJ/mol | A1 |
| combining hydration enthalpies of one mole of each ion: -406 + (-364) | M1 |
| total hydration enthalpy = -770 kJ/mol | A1 |
| deltaH(solution) = 787 - 770 = +17 kJ/mol | A1 |
| endothermic dissolution because lattice dissociation absorbs more energy than hydration releases | B1 |
| Final answer: The cycle first dissociates NaCl(s) to Na+(g) + Cl-(g), reversing lattice formation: +787 kJ/mol. Hydrating both ions gives -406 - 364 = -770 kJ/mol. deltaH(solution) = 787 - 770 = +17 kJ/mol; endothermic because lattice dissociation requires more energy than hydration releases. | |