A Level Chemistry Paper 1
Covers Atomic Structure, Amount of Substance, Bonding and Structure and 9 more.
Questions
Question 1 [2 marks]
Redox and Electrode Potentials
Deduce the oxidation state of chromium in the dichromate ion, Cr2O7^2-.
Question 2 [3 marks]
Chemical Equilibria
Write the expression for the equilibrium constant Kc for the reaction 2SO2(g) + O2(g) <=> 2SO3(g), and state its units. Show how you obtain the units.
Question 3 [3 marks]
Bonding and Structure
Deduce the number of bonding regions and lone pairs of electrons around the central carbon atom in a molecule of carbon dioxide, CO2, and hence give its shape and bond angle.
Question 4 [3 marks]
Periodicity
Explain why the melting point of silicon is much higher than that of phosphorus, even though both are in Period 3.
Question 5 [3 marks]
Acids, Bases and pH
State the meaning of the term 'strong acid', and explain why a 0.100 mol dm-3 solution of hydrochloric acid has a much lower pH than a 0.100 mol dm-3 solution of ethanoic acid.
Question 6 [3 marks]
Analytical Techniques
A sample of ethanol is analysed by 1H NMR spectroscopy, showing signals at 1.2, 2.6 and 3.7 ppm. When a few drops of D2O are added to the sample and the spectrum is re-run, the signal at 2.6 ppm disappears.
Explain this observation, and identify which proton environment in ethanol is responsible for the signal at 2.6 ppm.
Question 7 [3 marks]
Atomic Structure
Successive ionisation energies for element X, in kJ/mol, are: 590, 1145, 4912, 6474, 8144.
Deduce which group of the periodic table element X is in, explaining your reasoning.
Question 8 [4 marks]
Organic Chemistry
1-bromobutane (a primary haloalkane) and 2-bromo-2-methylpropane (a tertiary haloalkane) react with hot aqueous sodium hydroxide by nucleophilic substitution.
Compare their predominant mechanisms and explain why formation of a tertiary carbocation is more favourable than formation of a primary carbocation. Explain why the relative rates of these two different mechanisms cannot be ranked from carbocation stability alone.
Question 9 [4 marks]
Amount of Substance
Calculate the total number of ions present in 5.85 g of sodium chloride, NaCl (Mr = 58.5).
The Avogadro constant is 6.02 x 10^23 mol-1.
Question 10 [6 marks]
Thermodynamics
For a reaction, deltaH = +45.0 kJ/mol and deltaS = +125 J K-1 mol-1.
Calculate deltaG at (a) 250 K and (b) 400 K, and state at which of these temperatures the reaction is feasible.
Question 11 [5 marks]
Reaction Kinetics
The initial rate of a reaction between A and B was measured in three experiments:
Experiment 1: [A] = 0.100 mol dm-3, [B] = 0.100 mol dm-3, rate = 2.00 x 10^-3 mol dm-3 s-1
Experiment 2: [A] = 0.200 mol dm-3, [B] = 0.100 mol dm-3, rate = 8.00 x 10^-3 mol dm-3 s-1
Experiment 3: [A] = 0.200 mol dm-3, [B] = 0.200 mol dm-3, rate = 8.00 x 10^-3 mol dm-3 s-1
Deduce the order of reaction with respect to A and to B, and write the rate equation.
Question 12 [4 marks]
Thermodynamics
A reaction has deltaH = -172 kJ/mol and deltaS = -220 J K-1 mol-1.
Calculate the maximum temperature at which this reaction remains thermodynamically feasible, assuming deltaH and deltaS do not vary with temperature.
Question 13 [6 marks]
Energetics
Use a Born-Haber cycle and the data below to calculate the lattice enthalpy of formation of calcium oxide, CaO.
Enthalpy of formation of CaO(s) = -635 kJ/mol; enthalpy of atomisation of Ca(s) = +178 kJ/mol; 1st ionisation energy of Ca = +590 kJ/mol; 2nd ionisation energy of Ca = +1145 kJ/mol;
enthalpy of atomisation of O2(g), per mole of O atoms, = +249 kJ/mol; 1st electron affinity of O = -141 kJ/mol; 2nd electron affinity of O = +798 kJ/mol.
Question 14 [5 marks]
Amount of Substance
0.246 g of an unknown solid monoprotic acid, HA, was dissolved in water and required 24.0 cm3 of 0.100 mol dm-3 sodium hydroxide solution for complete neutralisation.
Calculate the molar mass of the acid.
Question 15 [6 marks]
Energetics
Given the enthalpy changes for the following two reactions:
(1) C(s) + O2(g) -> CO2(g), deltaH1 = -393.5 kJ/mol
(2) CO(g) + 1/2O2(g) -> CO2(g), deltaH2 = -283.0 kJ/mol
Use Hess's law to calculate the standard enthalpy of formation of carbon monoxide, CO(g): C(s) + 1/2O2(g) -> CO(g). State Hess's law as part of your answer.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| 2Cr + 7(-2) = -2 | M1 |
| Cr = +6 | A1 |
| Final answer: 2Cr + 7(-2) = -2; Cr = +6. | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| Kc = [SO3]^2 / ([SO2]^2[O2]) | B1 |
| correctly working through the units of each concentration term | B1 |
| units of Kc = mol-1 dm3 | B1 |
| Final answer: Kc = [SO3]^2/([SO2]^2[O2]); units = (mol dm-3)^2 / (mol dm-3)^3 = mol-1 dm3. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| 2 bonding regions (the 2 C=O double bonds, each treated as one region of electron density) and 0 lone pairs on carbon | B1 |
| a linear shape | B1 |
| a bond angle of 180 degrees | B1 |
| Final answer: 2 bonding regions, 0 lone pairs; linear, bond angle 180 degrees | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| Si has a giant covalent network of strong bonds | B1 |
| P4 is molecular with weak London forces between molecules | B1 |
| melting silicon requires much more energy to disrupt covalent bonds than melting phosphorus requires to overcome intermolecular forces | B1 |
| Final answer: Si has a giant covalent network of strong bonds; P4 is molecular with weak London forces between molecules; melting silicon requires much more energy to disrupt covalent bonds than melting phosphorus requires to overcome intermolecular forces. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| a strong acid fully dissociates in aqueous solution | B1 |
| ethanoic acid partly dissociates, giving smaller [H+] than fully dissociated HCl of the same concentration | B1 |
| pH = -log10[H+], so greater [H+] means lower pH | B1 |
| Final answer: a strong acid fully dissociates in aqueous solution; ethanoic acid partly dissociates, giving smaller [H+] than fully dissociated HCl of the same concentration; pH = -log10[H+], so greater [H+] means lower pH. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| 2.6 ppm signal is OH | B1 |
| OH proton exchanges with deuterium from D2O forming OD | B1 |
| deuterium is not detected in ordinary 1H NMR, so this signal disappears; C-H protons do not exchange under these conditions | B1 |
| Final answer: 2.6 ppm signal is OH; OH proton exchanges with deuterium from D2O forming OD; deuterium is not detected in ordinary 1H NMR, so this signal disappears; C-H protons do not exchange under these conditions. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| identifying the large jump in ionisation energy between the 2nd and 3rd values | B1 |
| explaining this shows 2 electrons are removed relatively easily from an outer shell before the next electron is removed from a full inner shell | B1 |
| X is in Group 2 | B1 |
| Final answer: Group 2: the large jump from the second to third ionisation energy shows two outer-shell electrons; the third electron is removed from an inner shell. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| primary haloalkane predominantly SN2, concerted OH- backside attack and C-Br cleavage | B1 |
| tertiary haloalkane predominantly SN1, C-Br heterolysis before OH- attack | B1 |
| tertiary carbocation stabilised by alkyl electron donation, lowering the ionisation barrier relative to an unstable primary carbocation | B1 |
| SN1 rate depends on haloalkane concentration, while SN2 rate also depends on OH- concentration, so cross-mechanism rates cannot be ranked universally | B1 |
| Final answer: primary haloalkane predominantly SN2, concerted OH- backside attack and C-Br cleavage; tertiary haloalkane predominantly SN1, C-Br heterolysis before OH- attack; tertiary carbocation stabilised by alkyl electron donation, lowering the ionisation barrier relative to an unstable primary carbocation; SN1 rate depends on haloalkane concentration, while SN2 rate also depends on OH- concentration, so cross-mechanism rates cannot be ranked universally. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| n(NaCl) = mass / Mr = 5.85 / 58.5 | M1 |
| n(NaCl) = 0.100 mol | A1 |
| each formula unit of NaCl containing 2 ions (1 Na+ and 1 Cl-), so n(ions) = 0.200 mol | M1 |
| number of ions = 0.200 x 6.02 x 10^23 = 1.20 x 10^23 | A1 |
| Final answer: n(NaCl) = 5.85/58.5 = 0.100 mol. Each formula unit has one Na+ and one Cl-, so n(ions) = 0.200 mol. Number of ions = 0.200 x 6.02 x 10^23 = 1.20 x 10^23. | |
| Question 10[6 marks] | |
|---|---|
| Answer or working | Marks |
| convert deltaS to 0.125 kJ K-1 mol-1 | M1 |
| deltaG250 = 45.0 - 250(0.125) | M1 |
| +13.75 kJ mol-1, accept +13.8 | A1 |
| deltaG400 = 45.0 - 400(0.125) | M1 |
| -5.00 kJ mol-1 | A1 |
| feasible only at 400 K since deltaG is negative there and positive at 250 K | B1 |
| Final answer: convert deltaS to 0.125 kJ K-1 mol-1; deltaG250 = 45.0 - 250(0.125); +13.75 kJ mol-1, accept +13.8; deltaG400 = 45.0 - 400(0.125); -5.00 kJ mol-1; feasible only at 400 K since deltaG is negative there and positive at 250 K. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| comparing experiments 1 and 2: [A] doubles while [B] is constant, and rate increases by a factor of 4 | M1 |
| order with respect to A = 2 | A1 |
| comparing experiments 2 and 3: [B] doubles while [A] is constant, and rate is unchanged | M1 |
| order with respect to B = 0 | A1 |
| rate equation: rate = k[A]^2 | A1 |
| Final answer: Experiments 1 and 2: doubling [A] at constant [B] quadruples the rate, so A is second order. Experiments 2 and 3: doubling [B] at constant [A] leaves the rate unchanged, so B is zero order. Thus rate = k[A]^2. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| boundary deltaG = 0 gives T = deltaH/deltaS | M1 |
| T = -172000/(-220) with consistent units | M1 |
| 781.8 K, about 782 K | A1 |
| deltaG < 0 below this boundary; at it deltaG = 0, and above it reaction is not feasible in this model | B1 |
| Final answer: boundary deltaG = 0 gives T = deltaH/deltaS; T = -172000/(-220) with consistent units; 781.8 K, about 782 K; deltaG < 0 below this boundary; at it deltaG = 0, and above it reaction is not feasible in this model. | |
| Question 13[6 marks] | |
|---|---|
| Answer or working | Marks |
| setting up a correct Hess's law cycle relating deltaHf to the sum of the other enthalpy terms plus the lattice enthalpy | M1 |
| using atomisation of Ca + 1st IE + 2nd IE = 178 + 590 + 1145 = 1913 kJ/mol | M1 |
| using atomisation of O + 1st EA + 2nd EA = 249 + (-141) + 798 = 906 kJ/mol | M1 |
| combining all six known terms to give a total of 2819 kJ/mol | A1 |
| lattice enthalpy = deltaHf - 2819 | M1 |
| -3454 kJ/mol | A1 |
| Final answer: Born-Haber cycle: deltaHf = atomisation(Ca) + IE1 + IE2 + atomisation(O) + EA1 + EA2 + lattice formation. Ca terms = 178 + 590 + 1145 = 1913; O terms = 249 - 141 + 798 = 906 kJ/mol. Known terms total 2819 kJ/mol, so lattice formation = deltaHf - 2819 = -635 - 2819 = -3454 kJ/mol. | |
| Question 14[5 marks] | |
|---|---|
| Answer or working | Marks |
| n(NaOH) = 0.100 x (24.0/1000) | M1 |
| n(NaOH) = 0.00240 mol | A1 |
| n(HA) = n(NaOH) = 0.00240 mol, since HA is monoprotic (1:1 mole ratio) | B1 |
| molar mass M = mass / amount = 0.246 / 0.00240 | M1 |
| M = 102.5 g mol-1; accept 103 g mol-1 to 3 significant figures. Relative molecular mass Mr itself has no units. | A1 |
| Final answer: n(NaOH) = 0.100 x 24.0/1000 = 0.00240 mol. HA is monoprotic, so n(HA) = n(NaOH) = 0.00240 mol. M = mass/amount = 0.246/0.00240 = 102.5 g mol-1 (103 g mol-1 to 3 significant figures). | |
| Question 15[6 marks] | |
|---|---|
| Answer or working | Marks |
| Hess's law: enthalpy change is independent of route for the same initial and final conditions | B1 |
| reversing equation 2: CO2(g) -> CO(g) + 1/2O2(g) | M1 |
| changing the enthalpy sign of equation 2 to +283.0 kJ/mol | A1 |
| adding equation 1 to the reversed equation and cancelling CO2 and 1/2O2 to obtain C(s) + 1/2O2(g) -> CO(g) | M1 |
| combining the signed enthalpies: -393.5 + 283.0 | M1 |
| deltaHf(CO) = -110.5 kJ/mol | A1 |
| Final answer: Hess's law states that enthalpy change is independent of route for the same initial and final conditions. Reverse reaction 2 to CO2(g) -> CO(g) + 1/2O2(g), changing its enthalpy to +283.0 kJ/mol. Add reaction 1 and cancel CO2 and 1/2O2 to give C(s) + 1/2O2(g) -> CO(g). deltaHf(CO) = -393.5 + 283.0 = -110.5 kJ/mol. | |