A Level Chemistry Paper 4
Covers Atomic Structure, Amount of Substance, Bonding and Structure and 9 more.
Questions
Question 1 [2 marks]
Analytical Techniques
A compound's 1H NMR spectrum includes a signal at a chemical shift of 9.70 ppm. Suggest the type of proton responsible for this signal, and identify the class of compound this suggests.
Question 2 [3 marks]
Atomic Structure
Iron has atomic number 26. Give the full electron configuration of the Fe2+ ion, and explain why the 4s electrons are removed before the 3d electrons when the ion forms.
Question 3 [3 marks]
Bonding and Structure
State the number of bonding pairs and lone pairs of electrons around the central atom in a molecule of methane, CH4, and hence give its shape and bond angle.
Question 4 [3 marks]
Acids, Bases and pH
Calculate the pH of a solution of sodium hydroxide with concentration 0.0200 mol dm-3,
given Kw = 1.00 x 10^-14 mol2 dm-6 at 298 K.
Question 5 [3 marks]
Reaction Kinetics
In an experiment, doubling the concentration of reactant A (with B kept constant) doubles the initial rate of reaction.
Doubling the concentration of B (with A kept constant) leaves the rate unchanged.
Deduce the order of reaction with respect to A and to B, and write the rate equation.
Question 6 [2 marks]
Redox and Electrode Potentials
Iron(II) ions are oxidised by acidified potassium manganate(VII) solution.
Using the half-equations Fe2+ -> Fe3+ + e- and MnO4- + 8H+ + 5e- -> Mn2+ + 4H2O,
construct the overall ionic equation for the reaction.
Question 7 [3 marks]
Thermodynamics
Diamond is thermodynamically less stable than graphite (deltaG for the conversion of diamond to graphite is negative at 298 K), yet diamond does not spontaneously turn into graphite under normal conditions.
Explain this observation.
Question 8 [3 marks]
Redox and Electrode Potentials
Write a balanced half-equation for the oxidation of sulfur dioxide, SO2, to sulfate ions, SO4^2-, in aqueous solution.
Question 9 [3 marks]
Thermodynamics
At 350 K, a reaction has deltaG = -18.5 kJ/mol and deltaS = +85.0 J K-1 mol-1. Calculate deltaH for this reaction.
Question 10 [4 marks]
Chemical Equilibria
0.500 mol of PCl5 was placed in a 2.00 dm3 container and allowed to reach equilibrium: PCl5(g) <=> PCl3(g) + Cl2(g).
At equilibrium, 0.320 mol of PCl5 remained. Calculate the value of Kc, including units.
Question 11 [4 marks]
Organic Chemistry
Ethanoyl chloride, CH3COCl, reacts vigorously with water at room temperature, but ethanoic acid does not.
Write an equation for the reaction of ethanoyl chloride with water, state what would be observed, and explain why acyl chlorides are much more reactive towards nucleophiles than the corresponding carboxylic acids.
Question 12 [4 marks]
Energetics
Use the mean bond enthalpies below to calculate the enthalpy change for the reaction CH4(g) + Cl2(g) -> CH3Cl(g) + HCl(g).
Bond enthalpies (kJ/mol): C-H = 413, Cl-Cl = 242, C-Cl = 339, H-Cl = 431. State whether the reaction is exothermic or endothermic, giving a reason.
Question 13 [4 marks]
Periodicity
Explain why aluminium oxide, Al2O3, does not dissolve in water but does react with both dilute hydrochloric acid and dilute sodium hydroxide solution.
Question 14 [4 marks]
Chemical Equilibria
A gaseous equilibrium, N2(g) + 3H2(g) <=> 2NH3(g), is established in a container.
Explain the effect on the position of equilibrium of adding an inert gas such as argon (a) at constant volume, and (b) at constant total pressure (allowing the container's volume to increase). Assume temperature is constant in both cases.
Question 15 [4 marks]
Organic Chemistry
Benzene, C6H6, does not readily undergo addition reactions with bromine, unlike alkenes such as cyclohexene.
Explain, in terms of its structure and bonding, why benzene resists addition reactions and instead undergoes substitution reactions.
Question 16 [5 marks]
Bonding and Structure
Tetrachloromethane, CCl4, is a non-polar molecule overall, but trichloromethane, CHCl3, is polar overall, even though both molecules are tetrahedral and contain polar C-Cl bonds.
Explain this difference.
Question 17 [6 marks]
Amount of Substance
A cylinder contains 2.50 dm3 of oxygen gas at a pressure of 1.50 x 10^5 Pa and a temperature of 350 K.
Calculate the amount, in mol, of oxygen gas in the cylinder. (R = 8.31 J K-1 mol-1; use pV = nRT with p in Pa and V in m3)
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| signal is characteristic of CHO proton | B1 |
| an aldehyde is suggested, not a unique molecular structure | B1 |
| Final answer: signal is characteristic of CHO proton; an aldehyde is suggested, not a unique molecular structure. | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| the filled core 1s2 2s2 2p6 3s2 3p6 in Fe2+ | B1 |
| 3d6 with no 4s electrons, giving 24 electrons in Fe2+; no separate neutral-atom configuration required | B1 |
| explaining that once electrons occupy 3d, the 4s subshell becomes higher in energy than 3d, so 4s electrons are lost first | B1 |
| Final answer: Fe: [Ar]3d6 4s2; Fe2+: 1s2 2s2 2p6 3s2 3p6 3d6. In the occupied atom the 4s electrons are higher in energy than the 3d electrons and are removed first. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| 4 bonding pairs and 0 lone pairs | B1 |
| a tetrahedral shape | B1 |
| a bond angle of 109.5 degrees | B1 |
| Final answer: 4 bonding pairs, 0 lone pairs; tetrahedral, bond angle 109.5 degrees | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| [H+] = Kw/[OH-] = 1.00 x 10^-14/0.0200 | M1 |
| [H+] = 5.00 x 10^-13 mol dm-3 | A1 |
| pH = 12.30; accept equivalent pOH method | A1 |
| Final answer: [H+] = Kw/[OH-] = 1.00 x 10^-14/0.0200; [H+] = 5.00 x 10^-13 mol dm-3; pH = 12.30; accept equivalent pOH method. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| order with respect to A = 1 | B1 |
| order with respect to B = 0 | B1 |
| rate equation rate = k[A] | B1 |
| Final answer: Order in A = 1; order in B = 0; rate = k[A]. | |
| Question 6[2 marks] | |
|---|---|
| Answer or working | Marks |
| multiplying iron oxidation by 5 gives 5Fe2+ -> 5Fe3+ + 5e- | M1 |
| combining and cancelling electrons gives 5Fe2+ + MnO4- + 8H+ -> 5Fe3+ + Mn2+ + 4H2O | A1 |
| Final answer: multiplying iron oxidation by 5 gives 5Fe2+ -> 5Fe3+ + 5e-; combining and cancelling electrons gives 5Fe2+ + MnO4- + 8H+ -> 5Fe3+ + Mn2+ + 4H2O. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| thermodynamic feasibility does not determine rate | B1 |
| conversion requires breaking/rearranging strong covalent bonds, giving high activation energy | B1 |
| at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable | B1 |
| Final answer: thermodynamic feasibility does not determine rate; conversion requires breaking/rearranging strong covalent bonds, giving high activation energy; at room temperature too few particles overcome the barrier, so conversion is negligibly slow and diamond is kinetically stable. | |
| Question 8[3 marks] | |
|---|---|
| Answer or working | Marks |
| oxygen balanced with 2H2O on left (acidic form), or with 4OH- on left and 2H2O on right (alkaline form); award independently for oxygen balance even if hydrogen or charge is incorrect | B1 |
| hydrogen balanced with 4H+ on right (acidic form), or with 4OH- on left and 2H2O on right (alkaline form); award independently for hydrogen balance even if oxygen or charge is incorrect | B1 |
| charge balanced with 2e- on right; accept equivalent balanced alkaline half-equation SO2 + 4OH- -> SO4^2- + 2H2O + 2e- | B1 |
| Final answer: SO2 + 2H2O -> SO4^2- + 4H+ + 2e-. Two waters balance oxygen, four H+ balance hydrogen, and two electrons on the right balance charge (0 on each side). Equivalent alkaline form: SO2 + 4OH- -> SO4^2- + 2H2O + 2e-. | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| deltaH = deltaG + TdeltaS | M1 |
| convert 85.0 J K-1 mol-1 to 0.0850 kJ K-1 mol-1 | M1 |
| -18.5 + 350(0.0850) = +11.25 kJ mol-1, accept +11.3 | A1 |
| Final answer: deltaH = deltaG + TdeltaS; convert 85.0 J K-1 mol-1 to 0.0850 kJ K-1 mol-1; -18.5 + 350(0.0850) = +11.25 kJ mol-1, accept +11.3. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles reacted = 0.500 - 0.320 = 0.180 mol, so n(PCl3) = n(Cl2) = 0.180 mol | M1 |
| equilibrium concentrations [PCl5] = 0.160, [PCl3] = [Cl2] = 0.0900 mol dm-3 | M1 |
| Kc = [PCl3][Cl2] / [PCl5] = (0.0900 x 0.0900) / 0.160 | M1 |
| Kc = 0.0506 mol dm-3 | A1 |
| Final answer: PCl5 reacted = 0.500 - 0.320 = 0.180 mol, forming 0.180 mol each of PCl3 and Cl2. Dividing by 2.00 dm3 gives [PCl5] = 0.160 and [PCl3] = [Cl2] = 0.0900 mol dm-3. Kc = [PCl3][Cl2]/[PCl5] = 0.0900^2/0.160 = 0.0506 mol dm-3. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| CH3COCl + H2O -> CH3COOH + HCl | B1 |
| steamy acidic HCl fumes/vigorous reaction | B1 |
| Cl- is a better leaving group than OH- | B1 |
| OH lone-pair donation stabilises the acid carbonyl more effectively, making its carbon less electrophilic than in acyl chloride | B1 |
| Final answer: CH3COCl + H2O -> CH3COOH + HCl; steamy acidic HCl fumes/vigorous reaction; Cl- is a better leaving group than OH-; OH lone-pair donation stabilises the acid carbonyl more effectively, making its carbon less electrophilic than in acyl chloride. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| bonds broken = 1(C-H) + 1(Cl-Cl) = 413 + 242 = 655 | M1 |
| bonds formed = 1(C-Cl) + 1(H-Cl) = 339 + 431 = 770 | M1 |
| deltaH = 655 - 770 = -115 kJ/mol | A1 |
| stating the reaction is exothermic, since deltaH is negative | B1 |
| Final answer: Bonds broken = C-H + Cl-Cl = 413 + 242 = 655 kJ/mol. Bonds formed = C-Cl + H-Cl = 339 + 431 = 770 kJ/mol. deltaH = 655 - 770 = -115 kJ/mol; exothermic because deltaH is negative. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| Al2O3 has a strong giant lattice with substantial ionic character | B1 |
| hydration by water does not compensate sufficiently for lattice disruption, so it is insoluble | B1 |
| oxide acts as a base with acid: Al2O3 + 6H+ -> 2Al3+ + 3H2O | B1 |
| it also acts as an acid with hydroxide to form aluminate, e.g. Al2O3 + 2OH- + 3H2O -> 2[Al(OH)4]-; this dual behaviour is amphoteric | B1 |
| Final answer: Al2O3 has a strong giant lattice with substantial ionic character; hydration by water does not compensate sufficiently for lattice disruption, so it is insoluble; oxide acts as a base with acid: Al2O3 + 6H+ -> 2Al3+ + 3H2O; it also acts as an acid with hydroxide to form aluminate, e.g. Al2O3 + 2OH- + 3H2O -> 2[Al(OH)4]-; this dual behaviour is amphoteric. | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| (a) the reacting-gas partial pressures remaining unchanged at constant volume and temperature | B1 |
| (a) no shift in equilibrium | B1 |
| (b) expansion at constant total pressure lowering the partial pressures of the reacting gases | B1 |
| (b) equilibrium shifting left towards 4 mol of reactant gas rather than 2 mol of product gas; credit this direction once | B1 |
| Final answer: (a) At constant volume and temperature, reacting-gas partial pressures are unchanged, so there is no shift. (b) At constant total pressure, expansion lowers all reacting-gas partial pressures. Equilibrium shifts left towards 4 mol of reactant gas rather than 2 mol of product gas. | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| benzene has a planar ring with overlapping p orbitals and delocalised pi electrons above/below the ring | B1 |
| delocalisation lowers energy and gives aromatic stabilisation | B1 |
| addition would destroy that stabilisation | B1 |
| substitution restores aromatic delocalisation overall when H is replaced, so it is favoured; the intermediate need not retain full aromaticity | B1 |
| Final answer: benzene has a planar ring with overlapping p orbitals and delocalised pi electrons above/below the ring; delocalisation lowers energy and gives aromatic stabilisation; addition would destroy that stabilisation; substitution restores aromatic delocalisation overall when H is replaced, so it is favoured; the intermediate need not retain full aromaticity. | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| chlorine being more electronegative than carbon and attracting the shared bonding electrons towards itself; no mark for merely repeating that C-Cl bonds are polar | B1 |
| CCl4 being a symmetrical tetrahedral molecule with four identical C-Cl bonds arranged symmetrically around the central carbon | B1 |
| the four identical bond dipoles in CCl4 cancelling out exactly by symmetry, giving no overall molecular dipole | B1 |
| CHCl3 having one C-H bond in place of one C-Cl bond, so the four bonds around carbon are not all identical | B1 |
| the C-H bond dipole failing to cancel the resultant of the three C-Cl dipoles, so CHCl3 has an overall (net) dipole moment | B1 |
| Final answer: Cl is more electronegative than C and attracts the shared bonding electrons towards itself. In CCl4 four identical C-Cl bonds are arranged symmetrically in a tetrahedron, so their dipoles cancel. CHCl3 has a C-H bond in place of one C-Cl bond; its dipole cannot cancel the resultant of the other three C-Cl dipoles, leaving a net dipole. | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| converting the volume to m3: 2.50 dm3 = 2.50 x 10^-3 m3 | M1 |
| rearranging pV = nRT to n = pV / (RT) | M1 |
| correct substitution of p = 1.50 x 10^5, V = 2.50 x 10^-3 and T = 350 | M1 |
| the denominator RT = 2910 (2908.5) | A1 |
| the numerical amount 0.129, without requiring a unit for this mark | A1 |
| stating the correct unit mol | B1 |
| Final answer: V = 2.50 x 10^-3 m3; n = pV/(RT) = (1.50 x 10^5 x 2.50 x 10^-3)/(8.31 x 350). RT = 2908.5; n = 375/2908.5 = 0.129 mol. | |