A Level Chemistry Short Paper A
Covers Atomic Structure, Amount of Substance, Bonding and Structure and 3 more.
Questions
Question 1 [2 marks]
Atomic Structure
Write the full electron configuration for a chlorine atom (atomic number 17).
Question 2 [2 marks]
Amount of Substance
Calculate the number of moles of NaOH in 250 cm3 of a 0.200 mol dm-3 solution.
Question 3 [3 marks]
Reaction Kinetics
The rate equation for a reaction is rate = k[A][B]^2.
Calculate the factor by which the initial rate increases if the concentrations of both A and B are doubled.
Question 4 [3 marks]
Chemical Equilibria
For the equilibrium 2SO2(g) + O2(g) <=> 2SO3(g), Kc = 4.00 x 10^4 mol-1 dm3 at a certain temperature.
Write the concentration ratio represented by Kc and explain what its large value indicates about the product and reactant concentration terms. Does this alone prove that [SO3] exceeds each reactant concentration?
Question 5 [4 marks]
Energetics
The enthalpy change for the hydrogenation of ethene, C2H4(g) + H2(g) -> C2H6(g), is -137 kJ/mol.
Given the standard enthalpy of formation of ethene, deltaHf(C2H4) = +52.0 kJ/mol (deltaHf of H2(g) = 0), calculate the standard enthalpy of formation of ethane, C2H6(g).
Question 6 [3 marks]
Atomic Structure
In a time-of-flight mass spectrometer, an ion is accelerated to a velocity of 1.40 x 10^5 m/s.
Calculate the time taken for this ion to travel the length of the flight tube, 2.10 m, before reaching the detector.
Question 7 [4 marks]
Energetics
Use the mean bond enthalpies below to calculate the enthalpy change for the reaction H2(g) + Cl2(g) -> 2HCl(g).
Bond enthalpies (kJ/mol): H-H = 436, Cl-Cl = 242, H-Cl = 431. State whether the reaction is exothermic or endothermic, giving a reason.
Question 8 [4 marks]
Atomic Structure
The mass spectrum of chlorine gas, Cl2, shows three molecular ion peaks at m/z = 70, 72 and 74, in the approximate ratio 9:6:1.
Explain the origin of these three peaks and their relative intensities in terms of the isotopes of chlorine.
Question 9 [5 marks]
Bonding and Structure
Explain why the boiling point of hydrogen iodide, HI, is higher than that of hydrogen bromide, HBr, even though neither molecule forms hydrogen bonds.
Question 10 [5 marks]
Chemical Equilibria
A gaseous equilibrium mixture at a total pressure of 200 kPa contains 0.20 mol N2O4 and 0.60 mol NO2,
in equilibrium via N2O4(g) <=> 2NO2(g). Calculate the value of Kp, including units.
Question 11 [5 marks]
Atomic Structure
Explain, using ideas about electron subshells, why the first ionisation energy of aluminium is lower than that of magnesium, despite aluminium having a greater nuclear charge.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| 1s2 2s2 2p6 3s2 correct | B1 |
| 3p5 correct, giving 17 electrons in total | B1 |
| Final answer: 1s2 2s2 2p6 3s2 3p5 | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| n = c x V = 0.200 x 0.250 | M1 |
| 0.0500 mol | A1 |
| Final answer: V = 250/1000 = 0.250 dm3; n = cV = 0.200 x 0.250 = 0.0500 mol. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| the factor from doubling [A] being 2^1 = 2 | M1 |
| the factor from doubling [B] being 2^2 = 4 | M1 |
| the overall factor being 2 x 4 = 8 | A1 |
| Final answer: Doubling [A] contributes a factor 2^1 = 2; doubling [B] contributes 2^2 = 4. The combined rate factor is 2 x 4 = 8. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| Kc = [SO3]^2 / ([SO2]^2[O2]) | B1 |
| the product concentration term [SO3]^2 being large relative to [SO2]^2[O2] when concentrations are expressed in mol dm-3 | B1 |
| no: the terms have different powers and Kc has units, so its numerical magnitude alone does not prove [SO3] exceeds each reactant concentration; equilibrium composition also depends on the amounts and volume | B1 |
| Final answer: Kc = [SO3]^2 / ([SO2]^2[O2]). With concentrations in mol dm-3, the numerator is large relative to the denominator. This dimensional ratio alone does not prove [SO3] is greater than each reactant concentration; composition also depends on the amounts and volume. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| deltaHr = deltaHf(products) - deltaHf(reactants) = deltaHf(C2H6) - [deltaHf(C2H4) + deltaHf(H2)] | M1 |
| substituting -137 = deltaHf(C2H6) - 52.0 | M1 |
| rearranging to deltaHf(C2H6) = -137 + 52.0 | A1 |
| deltaHf(C2H6) = -85.0 kJ/mol | A1 |
| Final answer: deltaHr = deltaHf(C2H6) - [deltaHf(C2H4) + deltaHf(H2)]. Thus -137 = deltaHf(C2H6) - 52.0; rearranging gives deltaHf(C2H6) = -137 + 52.0 = -85.0 kJ/mol. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| time = distance / velocity | M1 |
| substituting 2.10 / (1.40 x 10^5) | M1 |
| 1.50 x 10^-5 s | A1 |
| Final answer: t = distance / velocity = 2.10 / (1.40 x 10^5) = 1.50 x 10^-5 s. | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| sum of bonds broken = 436 + 242 = 678 | M1 |
| sum of bonds formed = 2 x 431 = 862 | M1 |
| deltaH = 678 - 862 = -184 kJ/mol | A1 |
| stating the reaction is exothermic because more energy is released forming bonds than is needed to break them | B1 |
| Final answer: Breaking H-H and Cl-Cl requires 436 + 242 = 678 kJ/mol; forming 2 H-Cl releases 2 x 431 = 862 kJ/mol. deltaH = 678 - 862 = -184 kJ/mol; exothermic because forming the bonds releases more energy than breaking the reactant bonds requires. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| chlorine consisting of two isotopes, 35Cl and 37Cl | B1 |
| m/z = 70 corresponding to a 35Cl-35Cl molecule and m/z = 74 to a 37Cl-37Cl molecule | B1 |
| m/z = 72 corresponding to a 35Cl-37Cl combination | B1 |
| the 9:6:1 ratio arising from the roughly 75%:25% natural abundance of 35Cl and 37Cl combining randomly in each molecule | B1 |
| Final answer: Chlorine has isotopes 35Cl and 37Cl. Singly charged molecular ions 35Cl-35Cl, 35Cl-37Cl and 37Cl-37Cl give m/z 70, 72 and 74. Random combination with approximate abundances 0.75 and 0.25 gives probabilities 0.75^2 : 2 x 0.75 x 0.25 : 0.25^2 = 9:6:1. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| both HI and HBr being simple covalent molecules held together only by van der Waals (induced dipole-induced dipole) forces and weak permanent dipole-dipole forces | B1 |
| distinguishing the origin of London forces: fluctuations in electron density create instantaneous dipoles that induce dipoles in neighbouring molecules | B1 |
| HI having more electrons than HBr | B1 |
| HI therefore having a larger, more easily distorted electron cloud, giving stronger van der Waals forces between molecules | B1 |
| more energy being needed to overcome the stronger van der Waals forces in HI, giving it the higher boiling point | B1 |
| Final answer: HI and HBr are simple molecular substances with London forces and permanent dipole-dipole attractions. Fluctuating electron density creates instantaneous dipoles that induce dipoles in neighbouring molecules. HI has more electrons and a larger, more easily distorted electron cloud, so its London forces are stronger. More energy is needed to separate its molecules, giving the higher boiling point. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| total moles = 0.20 + 0.60 = 0.80 | M1 |
| mole fractions: N2O4 = 0.25, NO2 = 0.75 | M1 |
| partial pressures: p(N2O4) = 50 kPa, p(NO2) = 150 kPa | M1 |
| Kp = p(NO2)^2 / p(N2O4) = 150^2 / 50 | M1 |
| Kp = 450 kPa | A1 |
| Final answer: Total amount = 0.20 + 0.60 = 0.80 mol. Mole fractions N2O4:NO2 = 0.25:0.75, so their partial pressures are 50 and 150 kPa. Kp = p(NO2)^2/p(N2O4) = 150^2/50 = 450 kPa. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| magnesium [Ne]3s2, losing a 3s electron | B1 |
| aluminium [Ne]3s2 3p1, losing a 3p electron | B1 |
| the 3p subshell being higher in energy than 3s | B1 |
| the occupied 3s subshell providing additional shielding of the 3p electron | B1 |
| this reducing attraction to the aluminium outer electron sufficiently to outweigh the greater nuclear charge, so less energy is needed to remove it | B1 |
| Final answer: Mg is [Ne]3s2 and loses a 3s electron; Al is [Ne]3s2 3p1 and loses a 3p electron. The 3p subshell is higher in energy and is additionally shielded by the occupied 3s subshell. Its electron is attracted less strongly despite Al's greater nuclear charge, so less energy is needed to remove it. | |