A Level Paper 4: Mechanics and Statistics
Covers further mechanics, further statistics, differential equations, matrices, complex number arithmetic, and De Moivre's theorem.
Questions
Question 1 [3 marks]
De Moivre's Theorem, Loci and Regions
State De Moivre's theorem for a positive integer n.
Use it to simplify (cos(2 theta) + i sin(2 theta))^3, giving your answer in the form cos(k theta) + i sin(k theta).
Question 2 [3 marks]
Further Mechanics
A ball of mass 0.5 kg travelling at 8 m/s strikes a wall at right angles and rebounds at 5 m/s.
Find the magnitude of the impulse exerted by the wall on the ball.
Question 3 [3 marks]
Differential Equations
Find the integrating factor for the differential equation dy/dx + (2/x) y = x, for x > 0.
Use it to write the left-hand side of the equation as a single derivative.
Question 4 [4 marks]
Complex Numbers: Arithmetic and the Argand Diagram
z1 = 2 - 3i and z2 = -4 + i.
Find z1 - z2 and z1 / z2, giving each answer in the form a + bi.
Question 5 [4 marks]
Matrices and Linear Transformations
A = [[4, -1], [2, 3]].
Find det(A) and the inverse of A.
Question 6 [5 marks]
De Moivre's Theorem, Loci and Regions
Solve z^4 = -16, giving each of the four roots in the form a + bi where a and b are exact.
Question 7 [4 marks]
Complex Numbers: Arithmetic and the Argand Diagram
Solve the equation z^2 - 6z + 25 = 0.
Give each root in the form a + bi.
Question 8 [5 marks]
Further Statistics
The number of calls received by a helpline in a 10 minute period follows a Poisson distribution with mean 4.
Find the probability that in a randomly chosen 10 minute period there are at least 2 calls, giving your answer to 4 decimal places.
Question 9 [4 marks]
Complex Numbers: Arithmetic and the Argand Diagram
z = 2 + i is a root of the cubic equation z^3 - 7z^2 + 17z - 15 = 0, which has real coefficients.
State a second complex root, then find the third (real) root of the equation.
Question 10 [5 marks]
Differential Equations
Find the general solution of the differential equation dy/dx + y tan(x) = sec(x), for -pi/2 < x < pi/2, giving y in terms of x.
Question 11 [5 marks]
Matrices and Linear Transformations
Find, as a single 2x2 matrix, the transformation representing a shear that maps (0, 1) to (2, 1) and fixes every point on the x-axis.
Hence find the image of the point (3, 5) under this shear.
Question 12 [5 marks]
Further Mechanics
A stationary particle of mass 4 kg is acted on by a constant force of magnitude 15 N for 6 seconds.
Find the impulse given to the particle and the speed it reaches, then find the constant force needed to bring it to rest again in a further 2 seconds.
Question 13 [6 marks]
Complex Numbers: Arithmetic and the Argand Diagram
Solve the equation z^2 - 3z + (3 - i) = 0, giving both roots in the form a + bi.
Question 14 [6 marks]
Further Mechanics
A smooth ball of mass 0.4 kg strikes a fixed smooth wall. Immediately before impact the ball has velocity (6i - 4j) m/s, where i is a unit vector parallel to the wall and j is a unit vector perpendicular to the wall, directed away from it. The coefficient of restitution between the ball and the wall is 0.5.
Find the velocity of the ball immediately after impact, and find the magnitude of the impulse exerted by the wall on the ball.
Question 15 [6 marks]
Differential Equations
Find the particular solution of d^2y/dx^2 - 3 dy/dx - 4y = -6e^(2x), given that y = 3 and dy/dx = 5 when x = 0.
Question 16 [6 marks]
Further Statistics
The number of flaws in a 10 m length of cable follows a Poisson distribution with mean lambda. A single observation is used to test H0: lambda = 6 against H1: lambda < 6, at the 5% significance level.
Find the critical region for the test, and state the actual (achieved) significance level.
Question 17 [6 marks]
Further Mechanics
A car of mass 900 kg travels round a bend on a track of radius 40 m, banked at angle theta to the horizontal, at the design speed for which no sideways friction is needed.
Given that the design speed is 18 m/s, find theta to 1 decimal place, and find the magnitude of the normal reaction force at this speed. Take g = 9.8 m/s^2.
Model solutions
| Question 1[3 marks] | |
|---|---|
| Answer or working | Marks |
| stating (cos(theta) + i sin(theta))^n = cos(n theta) + i sin(n theta) | B1 |
| applying this with theta replaced by 2 theta and n = 3 | M1 |
| cos(6 theta) + i sin(6 theta) | A1 |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| taking the direction towards the wall as positive and writing the velocities as +8 and -5 | M1 |
| impulse = m(v - u) = 0.5 x (-5 - 8) | M1 |
| magnitude of impulse = 6.5 Ns | A1 |
| Final answer: 6.5 Ns | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| integrating factor = e^(the integral of 2/x) | M1 |
| simplifying to e^(2 ln(x)) = x^2 | M1 |
| d/dx(x^2 y) = x^3 as the resulting equation | A1 |
| Final answer: Integrating factor x^2; equation becomes d/dx(x^2 y) = x^3 | |
| Question 4[4 marks] | |
|---|---|
| Answer or working | Marks |
| z1 - z2 = 6 - 4i | M1 |
| multiplying the numerator and denominator of z1/z2 by the conjugate -4 - i | M1 |
| the denominator (-4+i)(-4-i) = 17 | A1 |
| z1/z2 = -11/17 + 10/17 i | A1 |
| Final answer: z1 - z2 = 6 - 4i, z1 / z2 = -11/17 + 10/17 i | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| det(A) = 4x3 - (-1)x2 | M1 |
| det(A) = 14 | A1 |
| swapping the leading diagonal and negating the other diagonal entries | M1 |
| A^-1 = (1/14)[[3, 1], [-2, 4]] | A1 |
| Final answer: det(A) = 14; A^-1 = (1/14)[[3, 1], [-2, 4]] | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| writing -16 = 16(cos(pi) + i sin(pi)) | M1 |
| the fourth root modulus = 16^(1/4) = 2 | M1 |
| the angles (pi + 2k pi)/4 for k = 0, 1, 2, 3 | M1 |
| the angles pi/4, 3pi/4, 5pi/4, 7pi/4 | A1 |
| the roots sqrt(2)+sqrt(2)i, -sqrt(2)+sqrt(2)i, -sqrt(2)-sqrt(2)i, sqrt(2)-sqrt(2)i | A1 |
| Final answer: z = sqrt(2)+sqrt(2)i, -sqrt(2)+sqrt(2)i, -sqrt(2)-sqrt(2)i, sqrt(2)-sqrt(2)i | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| using the quadratic formula with a = 1, b = -6, c = 25 | M1 |
| discriminant = 36 - 100 = -64 | M1 |
| sqrt(-64) = 8i | A1 |
| z = 3 + 4i or z = 3 - 4i (both roots needed) | A1 |
| Final answer: z = 3 + 4i or z = 3 - 4i | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| P(X>=2) = 1 - P(X=0) - P(X=1) | M1 |
| P(X=0) = e^(-4) | M1 |
| P(X=0) = 0.0183 and P(X=1) = 4e^(-4) = 0.0733 | A1 |
| summing and subtracting from 1 | M1 |
| P(X>=2) = 0.9084 (4 dp) | A1 |
| Final answer: 0.9084 | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| stating the second root as 2 - i (complex roots occur in conjugate pairs for a real cubic) | B1 |
| using the sum of the three roots = 7 (since -(-7)/1) | M1 |
| combining (2 + i) + (2 - i) = 4 with the sum of roots to isolate the real root | M1 |
| the real root = 3 | A1 |
| Final answer: Second root 2 - i, real root 3 | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| finding the integrating factor e^(the integral of tan(x) dx) = e^(-ln(cos(x))) = sec(x) | M1 |
| writing sec(x) dy/dx + y sec(x)tan(x) = sec^2(x) as d/dx(y sec(x)) = sec^2(x) | M1 |
| integrating both sides to y sec(x) = tan(x) + C | M1 |
| dividing by sec(x), using tan(x)/sec(x) = sin(x) and 1/sec(x) = cos(x) | M1 |
| y = sin(x) + C cos(x) | A1 |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| recognising a shear parallel to the x-axis has the form [[1,k],[0,1]] | B1 |
| using the image of (0,1) being (2,1) to find k = 2 | M1 |
| the shear matrix [[1, 2], [0, 1]] | A1 |
| multiplying the shear matrix by the column vector (3,5) | M1 |
| the image point (13, 5) | A1 |
| Final answer: Shear matrix [[1, 2], [0, 1]]; image point (13, 5) | |
| Question 12[5 marks] | |
|---|---|
| Answer or working | Marks |
| impulse = force x time = 15 x 6 | M1 |
| impulse = 90 Ns | A1 |
| using impulse = mv to find the speed reached | M1 |
| v = 22.5 m/s | A1 |
| the stopping force = m x (v/t) = 4 x (22.5/2) = 45 N | A1 |
| Final answer: Impulse = 90 Ns, speed = 22.5 m/s, stopping force = 45 N | |
| Question 13[6 marks] | |
|---|---|
| Answer or working | Marks |
| the discriminant = 9 - 4(3 - i) | M1 |
| the discriminant = -3 + 4i | A1 |
| writing sqrt(-3+4i) = p + qi and squaring to get p^2 - q^2 = -3 and 2pq = 4 | M1 |
| substituting q = 2/p into p^2 - q^2 = -3 to form p^4 + 3p^2 - 4 = 0 | M1 |
| sqrt(-3+4i) = 1 + 2i (taking p^2 = 1, rejecting p^2 = -4) | A1 |
| z = 2 + i or z = 1 - i | A1 |
| Question 14[6 marks] | |
|---|---|
| Answer or working | Marks |
| recognising the wall is smooth, so the velocity component parallel to the wall (the i-component) is unchanged | M1 |
| the i-component remaining 6 | A1 |
| using Newton's law of restitution perpendicular to the wall: the j-component after impact = -e times the j-component before impact | M1 |
| the j-component after = -0.5 x (-4) = 2, giving velocity after impact = (6i + 2j) m/s | A1 |
| impulse = m(v after - v before) = 0.4[(6i+2j) - (6i-4j)] | M1 |
| the impulse = 2.4j Ns, magnitude 2.4 Ns | A1 |
| Final answer: Velocity after impact = (6i + 2j) m/s; magnitude of impulse = 2.4 Ns | |
| Question 15[6 marks] | |
|---|---|
| Answer or working | Marks |
| the auxiliary equation m^2 - 3m - 4 = 0, giving m = 4 and m = -1, so the complementary function is A e^(4x) + B e^(-x) | M1 |
| choosing the particular integral y = Ce^(2x), since 2 is not a root of the auxiliary equation | M1 |
| substituting to find C = 1, giving the particular integral e^(2x) | A1 |
| applying y(0) = 3 to get A + B = 2 | M1 |
| differentiating and applying dy/dx(0) = 5 to get 4A - B = 3 | M1 |
| solving simultaneously to get A = 1, B = 1, giving y = e^(4x) + e^(-x) + e^(2x) | A1 |
| Final answer: y = e^(4x) + e^(-x) + e^(2x) | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| recognising X ~ Po(6) under H0 and that the one-tailed test lambda < 6 needs a lower-tail critical region | M1 |
| calculating P(X=0) = e^(-6) | M1 |
| P(X=0) = 0.00248 (3 s.f.) | A1 |
| calculating P(X<=1) = P(X=0) + P(X=1) = 0.00248 + 0.01487 | M1 |
| P(X<=1) = 0.0174, and checking P(X<=2) = 0.0620 exceeds 0.05, so X=2 cannot be included | A1 |
| the critical region X = 0, 1, with actual significance level 0.0174 (1.74%) | A1 |
| Final answer: Critical region {X = 0, 1}; actual significance level 0.0174 (1.74%) | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| using tan(theta) = v^2/(rg) for the no-friction banking condition | M1 |
| substituting v = 18, r = 40, g = 9.8 to get tan(theta) = 324/392 | M1 |
| theta = 39.6 degrees (1 dp) | A1 |
| resolving vertically and horizontally: N cos(theta) = mg and N sin(theta) = mv^2/r | M1 |
| combining to N = sqrt((mg)^2 + (mv^2/r)^2) | M1 |
| N = 11400 N (3 s.f.) | A1 |
| Final answer: theta = 39.6 degrees; N = 11400 N (3 s.f.) | |