A Level Paper 3: Thermal Physics and Mechanics
Covers forces and motion, work, energy and power, materials, circular motion and simple harmonic motion, thermal physics and ideal gases, electric circuits, and fields.
Questions
Question 1 [2 marks]
Materials
A spring is stretched by an applied force.
State Hooke's law and define the term 'limit of proportionality'.
Question 2 [2 marks]
Electric Circuits
A component obeys Ohm's law.
State Ohm's law, including the condition under which it applies.
Question 3 [2 marks]
Work, Energy and Power
A force does work when it moves its point of application.
Define work done by a force, and state its unit.
Question 4 [2 marks]
Forces and Motion
Two objects, A and B, are in contact and interact with each other.
State Newton's third law of motion.
Question 5 [3 marks]
Circular Motion and Simple Harmonic Motion
A simple pendulum is to be set up with a period of 2.5 s. Take g = 9.81 m/s^2. Assume small-amplitude oscillations with negligible damping.
Calculate the length of pendulum required, using T = 2 pi sqrt(L/g).
Question 6 [3 marks]
Thermal Physics and Ideal Gases
A quantity of 0.50 kg of water is heated from 20 degC to 80 degC.
Calculate the thermal energy needed, taking the specific heat capacity of water as 4200 J/(kg degC).
Question 7 [4 marks]
Fields
Two capacitors, of capacitance 100 microfarad and 150 microfarad, are connected in parallel across a 6.0 V supply.
Calculate (a) the combined capacitance, and (b) the total charge stored.
Question 8 [2 marks]
Circular Motion and Simple Harmonic Motion
A mass-spring system oscillates with a frequency of 4.0 Hz.
The mass is now replaced with a new mass that is 4 times greater, with the spring unchanged. Calculate the new frequency of oscillation, using the fact that frequency is inversely proportional to the square root of the mass.
Question 9 [2 marks]
Fields
A straight wire of length 0.45 m carries a current of 3.2 A and is placed at right angles to a uniform magnetic field of flux density 0.085 T.
Calculate the force on the wire.
Question 10 [3 marks]
Thermal Physics and Ideal Gases
A quantity of 0.20 kg of water at 100 degC is converted into steam at 100 degC.
Calculate the energy required, taking the specific latent heat of vaporisation of water as 2.26x10^6 J/kg.
Question 11 [4 marks]
Fields
A capacitor of capacitance 220 microfarad is charged to a potential difference of 9.0 V.
Calculate (a) the charge stored on the capacitor, and (b) the energy stored.
Question 12 [4 marks]
Materials
Two springs, each of spring constant 50 N/m, are connected in series.
Calculate the combined (effective) spring constant of the series combination, using 1/k(total) = 1/k1 + 1/k2, and state how this compares with the spring constant of a single spring.
Question 13 [4 marks]
Fields
A proton (charge +1.60x10^-19 C) moves at a speed of 2.5x10^6 m/s at right angles to a uniform magnetic field of flux density 0.40 T.
Calculate the magnitude of the magnetic force on the proton, using F = qvB, and state its direction relative to the velocity and the field.
Question 14 [5 marks]
Thermal Physics and Ideal Gases
A cylinder contains 0.0500 m^3 of an ideal gas at a pressure of 2.0x10^5 Pa and a temperature of 300 K.
Using the ideal gas equation pV = nRT, with the molar gas constant R = 8.31 J/(mol K), calculate (a) the number of moles of gas in the cylinder, and (b) the number of gas molecules present, using the Avogadro constant NA = 6.02x10^23 /mol.
Question 15 [5 marks]
Circular Motion and Simple Harmonic Motion
A mass of 0.40 kg is attached to a spring of spring constant 64 N/m and set into simple harmonic motion by a small vertical displacement.
Calculate (a) the period of oscillation, using T = 2 pi sqrt(m/k), and (b) the frequency of oscillation.
Question 16 [5 marks]
Fields
Two capacitors, of capacitance 60 microfarad and 30 microfarad, are connected in series across a 9.0 V supply.
Calculate (a) the combined capacitance, and (b) the energy stored in the combination, using E = 0.5 C V^2.
Question 17 [5 marks]
Thermal Physics and Ideal Gases
A container of volume 0.020 m^3 holds 3.0x10^24 molecules of an ideal gas, each of mass 5.3x10^-26 kg, with a mean square speed of 2.7x10^5 m^2/s^2.
Calculate the pressure exerted by the gas, using pV = (1/3) N m (mean square speed).
Question 18 [5 marks]
Circular Motion and Simple Harmonic Motion
A mass of 0.30 kg oscillates with SHM of amplitude 0.060 m and angular frequency 5.0 rad/s.
Calculate (a) the total energy of the oscillation, (b) the potential energy when the displacement is 0.030 m, using PE = 0.5 m omega^2 x^2, and (c) hence the kinetic energy at this displacement.
Question 19 [6 marks]
Thermal Physics and Ideal Gases
A 0.30 kg block of ice at 0 degC is heated until it becomes water at 0 degC, and this water is then further heated to 45 degC. Take the specific latent heat of fusion of ice as 3.34x10^5 J/kg and the specific heat capacity of water as 4200 J/(kg degC).
Calculate (a) the energy needed to melt the ice, (b) the energy needed to then heat the water from 0 degC to 45 degC, and (c) the total energy required for the whole process.
Question 20 [6 marks]
Work, Energy and Power
A ball of mass 0.25 kg is thrown with a speed of 12 m/s from a point 1.5 m above the ground. Air resistance is negligible. Take g = 9.81 m/s^2.
Using conservation of energy, calculate the speed of the ball just before it hits the ground, and explain why the direction in which the ball is thrown does not affect this answer.
Question 21 [6 marks]
Circular Motion and Simple Harmonic Motion
A ball of mass 0.30 kg is attached to a string and moves in a vertical circle of radius 0.75 m. At the bottom of the circle, the ball has a speed of 5.5 m/s. Take g = 9.81 m/s^2.
Calculate (a) the centripetal acceleration of the ball at the bottom of the circle, and (b) the tension in the string at this point, given that the tension acts upward (towards the centre) and gravity acts downward at this point. (c) State, with a reason, how the tension at the bottom compares with the tension at the top of the circle for the same speed.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| the extension of a spring or wire is directly proportional to the applied force, provided the limit of proportionality is not exceeded | B1 |
| the limit of proportionality is the point beyond which the force is no longer proportional to the extension | B1 |
| Final answer: Force is proportional to extension up to the limit of proportionality, the point beyond which this proportionality no longer holds | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| the current through a conductor is directly proportional to the potential difference across it | B1 |
| provided the physical conditions (such as temperature) remain constant | B1 |
| Final answer: Current is proportional to potential difference, provided temperature (and other physical conditions) stay constant | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| work done = force x distance moved in the direction of the force | B1 |
| the unit is the joule (J) | B1 |
| Final answer: work done = force x distance moved in the direction of the force; unit is the joule | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| the force A exerts on B and the reciprocal force B exerts on A are equal in magnitude | B1 |
| these forces act simultaneously in opposite directions, on the two different objects | B1 |
| Final answer: If A exerts a force on B, B exerts an equal, opposite force on A; the two forces act on different objects | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| using T = 2 pi sqrt(L/g), rearranged to L = T^2 g/(4 pi^2) | M1 |
| L = (2.5^2 x 9.81)/(4 x pi^2) | M1 |
| L = 1.55 m | A1 |
| Final answer: 1.55 m | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific heat capacity x change in temperature | M1 |
| energy = 0.50 x 4200 x 60 | M1 |
| energy = 1.26x10^5 J | A1 |
| Final answer: 1.26 x 10^5 J | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| using C(total) = C1 + C2 for capacitors in parallel | M1 |
| C(total) = 100 + 150 = 250 microfarad | A1 |
| using Q = CV | M1 |
| Q = 250x10^-6 x 6.0 = 1.5x10^-3 C | A1 |
| Final answer: C(total) = 250 microfarad, Q = 1.5 x 10^-3 C | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| using f(new)/f(old) = sqrt(m(old)/m(new)) | M1 |
| f(new) = 4.0/2 = 2.0 Hz | A1 |
| Final answer: new frequency = 2.0 Hz (the period doubles) | |
| Question 9[2 marks] | |
|---|---|
| Answer or working | Marks |
| using force = magnetic flux density x current x length | M1 |
| force = 0.122 N | A1 |
| Final answer: 0.122 N | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific latent heat of vaporisation | M1 |
| energy = 0.20 x 2.26x10^6 | M1 |
| energy = 4.52x10^5 J | A1 |
| Final answer: 4.52 x 10^5 J | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| using charge = capacitance x potential difference | M1 |
| charge = 220x10^-6 x 9.0 = 1.98x10^-3 C | A1 |
| using energy = 0.5 x capacitance x potential difference^2 | M1 |
| energy = 0.5 x 220x10^-6 x 9.0^2 = 8.91x10^-3 J | A1 |
| Final answer: charge = 1.98 mC, energy = 8.91 mJ | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| using 1/k(total) = 1/k1 + 1/k2 | M1 |
| 1/k(total) = 1/50 + 1/50 = 2/50 | M1 |
| k(total) = 25 N/m | A1 |
| the series combination is less stiff (has a smaller spring constant) than a single spring, since each spring stretches under the same force, giving twice the total extension | B1 |
| Final answer: k(total) = 25 N/m; the series combination is less stiff than a single spring | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| using F = qvB | M1 |
| F = 1.60x10^-19 x 2.5x10^6 x 0.40 | M1 |
| F = 1.6x10^-13 N | A1 |
| the force acts at right angles to both the velocity and the magnetic field | B1 |
| Final answer: 1.6 x 10^-13 N, acting at right angles to both the velocity and the field | |
| Question 14[5 marks] | |
|---|---|
| Answer or working | Marks |
| using pV = nRT, rearranged to n = pV/(RT) | M1 |
| n = (2.0x10^5 x 0.0500)/(8.31 x 300) | M1 |
| n = 4.01 mol | A1 |
| using number of molecules = n x NA | M1 |
| number of molecules = 4.01 x 6.02x10^23 = 2.41x10^24 | A1 |
| Final answer: n = 4.01 mol, number of molecules = 2.41 x 10^24 | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| using T = 2 pi sqrt(m/k) | M1 |
| sqrt(0.40/64) = 0.0791 | M1 |
| T = 2 pi x 0.0791 = 0.497 s | A1 |
| using f = 1/T | M1 |
| f = 2.01 Hz | A1 |
| Final answer: T = 0.497 s, f = 2.01 Hz | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| using 1/C(total) = 1/C1 + 1/C2 | M1 |
| 1/C(total) = 1/60 + 1/30 = 3/60 | M1 |
| C(total) = 20 microfarad | A1 |
| using E = 0.5 C V^2 | M1 |
| E = 0.5 x 20x10^-6 x 9.0^2 = 8.1x10^-4 J | A1 |
| Final answer: C(total) = 20 microfarad, E = 8.1 x 10^-4 J | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| using pV = (1/3) N m (mean square speed) | M1 |
| rearranging to p = N m (mean square speed)/(3V) | M1 |
| N m (mean square speed) = 3.0x10^24 x 5.3x10^-26 x 2.7x10^5 | M1 |
| dividing by 3V = 3 x 0.020 = 0.060 | M1 |
| p = 42930/0.060 = 715500 Pa, about 7.16x10^5 Pa | A1 |
| Final answer: p = 7.16 x 10^5 Pa | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| using total energy = 0.5 m omega^2 A^2 | M1 |
| total energy = 0.5 x 0.30 x 5.0^2 x 0.060^2 = 0.0135 J | A1 |
| using PE = 0.5 m omega^2 x^2 | M1 |
| PE = 0.5 x 0.30 x 5.0^2 x 0.030^2 = 3.38x10^-3 J | A1 |
| KE = total energy - PE = 0.0135 - 0.00338 = 0.0101 J | A1 |
| Final answer: total energy = 0.0135 J, PE at x = 0.030 m is 3.38 x 10^-3 J, KE = 0.0101 J | |
| Question 19[6 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific latent heat of fusion | M1 |
| energy to melt the ice = 0.30 x 3.34x10^5 = 1.00x10^5 J | A1 |
| using energy = mass x specific heat capacity x temperature change | M1 |
| energy to heat the water = 0.30 x 4200 x 45 = 5.67x10^4 J | A1 |
| total energy = 1.00x10^5 + 5.67x10^4 | M1 |
| total energy = 1.57x10^5 J | A1 |
| Final answer: energy to melt the ice = 1.00 x 10^5 J, energy to heat the water to 45 degC = 5.67 x 10^4 J, total energy = 1.57 x 10^5 J | |
| Question 20[6 marks] | |
|---|---|
| Answer or working | Marks |
| using conservation of energy: 0.5 m v0^2 + mgh = 0.5 m v^2, taking the ground as the reference level for GPE | M1 |
| the mass m cancels from every term | M1 |
| v^2 = v0^2 + 2gh | M1 |
| v^2 = 12^2 + (2 x 9.81 x 1.5) = 173 | M1 |
| v = 13.2 m/s | A1 |
| the direction thrown does not affect the answer because energy is a scalar quantity, so only the initial speed and the height dropped affect the final speed | B1 |
| Final answer: v = 13.2 m/s; the direction thrown does not matter because energy is a scalar, so only the initial speed and height dropped affect the final speed | |
| Question 21[6 marks] | |
|---|---|
| Answer or working | Marks |
| using a = v^2/r | M1 |
| a = 5.5^2/0.75 = 40.3 m/s^2 | A1 |
| at the bottom, T - mg = ma, since both T and the centripetal acceleration point towards the centre while weight acts away from it | M1 |
| T = m(a + g) = 0.30 x (40.3 + 9.81) = 15.0 N | A1 |
| at the bottom the tension must supply both the centripetal force and support the weight (T = m(a+g)), whereas at the top gravity itself contributes towards the centripetal force (T = m(a-g)) | B1 |
| so, for the same speed, the tension is always greater at the bottom of the circle than at the top | B1 |
| Final answer: acceleration = 40.3 m/s^2, tension at the bottom = 15.0 N; the tension is greater at the bottom than at the top for the same speed | |