A Level Paper 5: Extended Practice
Covers forces and motion, work, energy and power, materials, electric circuits, fields, thermal physics and ideal gases, circular motion and simple harmonic motion, and wave properties.
Questions
Question 1 [2 marks]
Forces and Motion
Two objects, A and B, are in contact and interact with each other.
State Newton's third law of motion.
Question 2 [2 marks]
Wave Properties and Superposition
A wave has a wavelength of 0.80 m and a period of 0.040 s.
Calculate the speed of the wave.
Question 3 [3 marks]
Electric Circuits
A current of 3.0 A flows through a resistor of resistance 8.0 ohm.
Calculate the power dissipated in the resistor, using P = I^2 R.
Question 4 [3 marks]
Circular Motion and Simple Harmonic Motion
A car travels around a circular bend of radius 45 m at a constant speed of 18 m/s.
Calculate the centripetal acceleration of the car.
Question 5 [4 marks]
Work, Energy and Power
A weightlifter raises a barbell of mass 120 kg through a height of 2.0 m in a time of 0.80 s. Take g = 9.81 m/s^2.
Calculate the average useful power transferred to the gravitational potential energy of the barbell-Earth system.
Question 6 [4 marks]
Thermal Physics and Ideal Gases
A fixed mass of gas at constant temperature occupies a volume of 4.0x10^-3 m^3 at a pressure of 1.5x10^5 Pa. Treat the gas as ideal and use absolute pressure.
The gas is compressed isothermally until its volume is 2.5x10^-3 m^3. Calculate the new pressure of the gas, using p1 V1 = p2 V2.
Question 7 [2 marks]
Materials
Two identical springs, each of spring constant 80 N/m, support a mass side by side, in parallel, sharing the load equally.
Calculate the combined (effective) spring constant of the parallel combination, using k(total) = k1 + k2, and state how this compares with the spring constant of a single spring.
Question 8 [2 marks]
Circular Motion and Simple Harmonic Motion
A mass-spring system oscillates with a frequency of 4.0 Hz.
The mass is now replaced with a new mass that is 4 times greater, with the spring unchanged. Calculate the new frequency of oscillation, using the fact that frequency is inversely proportional to the square root of the mass.
Question 9 [2 marks]
Wave Properties and Superposition
Unpolarised light of intensity I0 passes through a polarising filter, which transmits half of the incident intensity, and then through a second polarising filter whose transmission axis is at 60 degrees to that of the first.
Using Malus's law, I = I1 cos^2(theta), calculate the intensity transmitted through the second filter as a fraction of I0.
Question 10 [3 marks]
Forces and Motion
A uniform beam of weight 80 N and length 3.0 m is pivoted at one end and held horizontal by a vertical string attached 2.0 m from the pivot.
Calculate the tension in the string by taking moments about the pivot.
Question 11 [4 marks]
Fields
A parallel plate capacitor has plates separated by 5.0 mm with a potential difference of 400 V across them. Neglect edge effects.
Calculate (a) the electric field strength between the plates, using E = V/d, and (b) the force on a small charged particle carrying a charge of 2.0x10^-9 C placed between the plates, using F = qE.
Question 12 [4 marks]
Circular Motion and Simple Harmonic Motion
A mass on a spring oscillates with simple harmonic motion of amplitude 0.060 m and period 0.80 s.
Calculate the maximum speed and the maximum acceleration of the mass.
Question 13 [4 marks]
Work, Energy and Power
A skateboarder of mass 55 kg pushes herself up a ramp inclined at 15 degrees to the horizontal, travelling 12 m along the slope. Take g = 9.81 m/s^2.
Calculate the gain in gravitational potential energy.
Question 14 [4 marks]
Electric Circuits
A device is rated '240 V, 3.0 kW'.
Calculate the normal operating current of the device, and state the minimum rating of fuse (from 3 A, 5 A, 13 A) that should be used to protect it, explaining your choice.
Question 15 [4 marks]
Forces and Motion
A ball is thrown horizontally with a speed of 12 m/s from the top of a cliff of height 45 m. Neglect air resistance.
Taking g = 9.81 m/s^2, calculate (a) the time taken for the ball to reach the ground, and (b) the horizontal distance it travels.
Question 16 [5 marks]
Materials
A copper wire has a Young modulus of 1.1x10^11 Pa, a cross-sectional area of 3.0x10^-7 m^2 and a natural length of 2.5 m. Assume the wire or wires remain in their linear elastic regions.
Calculate the extension of the wire when a tensile force of 25 N is applied.
Question 17 [6 marks]
Electric Circuits
A 9.0 V battery of negligible internal resistance is connected to a 5.0 ohm resistor in series with a parallel combination of a 6.0 ohm resistor and a 12 ohm resistor.
Calculate (a) the total resistance of the circuit, (b) the total current from the battery, (c) the total power delivered by the battery, and (d) show that this equals the sum of the power dissipated in each of the three resistors.
Question 18 [3 marks]
Wave Properties and Superposition
An ultrasound transmitter-receiver emits sound of frequency 4.0 MHz towards blood flowing directly towards it at a speed of 0.25 m/s inside a blood vessel. The speed of sound in blood is 1600 m/s.
Calculate the Doppler frequency shift observed, using delta f = 2 f v/c, where v is the speed of the blood and c is the speed of sound in blood.
Question 19 [5 marks]
Electric Circuits
Two wires, X and Y, are made from the same material. Wire X has length 3.0 m and diameter 0.60 mm. Wire Y has length 1.5 m and diameter 0.30 mm.
Calculate the ratio of the resistance of wire X to the resistance of wire Y.
Question 20 [6 marks]
Materials
A wire is loaded elastically, obeying Hooke's law, from zero extension up to an extension of 3.0 mm under a force that rises uniformly to 80 N. Beyond this point the wire deforms plastically, stretching further to 5.0 mm extension while the force stays approximately constant at 80 N. When the 80 N force is then removed, the wire contracts elastically along a line parallel to the original loading line, ending with a permanent extension of 2.0 mm.
(a) Calculate the elastic strain energy stored during the initial elastic loading, from 0 to 3.0 mm.
(b) Calculate the additional work done by the force during the plastic stretch, from 3.0 mm to 5.0 mm.
(c) The wire recovers the same amount of elastic strain energy on unloading as it stored during the initial elastic loading in part (a). Calculate the total energy dissipated as heat in the wire over the whole loading-unloading cycle.
Question 21 [2 marks]
Wave Properties and Superposition
A stationary source emits sound of frequency 600 Hz. An observer moves directly towards the source at a speed of 15 m/s. The speed of sound in air is 340 m/s.
Calculate the frequency heard by the observer, using f' = f (v + vo)/v.
Question 22 [6 marks]
Work, Energy and Power
A pump raises water from a well of depth 12 m at a rate of 30 kg every second, then ejects it with a speed of 4.0 m/s. The pump is supplied with 6.0 kW of electrical power. Take g = 9.81 m/s^2. Take the water to be initially at rest at the bottom of the well.
Calculate (a) the gravitational PE gained by the water per second, (b) the kinetic energy gained by the water per second, (c) the useful power output of the pump, and (d) the efficiency of the pump.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| the force A exerts on B and the reciprocal force B exerts on A are equal in magnitude | B1 |
| these forces act simultaneously in opposite directions, on the two different objects | B1 |
| Final answer: If A exerts a force on B, B exerts an equal, opposite force on A; the two forces act on different objects | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| v = wavelength/period = 0.80/0.040 | M1 |
| v = 20 m s^-1 | A1 |
| Final answer: 20 m/s | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| using P = I^2 R | M1 |
| P = 3.0^2 x 8.0 | M1 |
| P = 72 W | A1 |
| Final answer: 72 W | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| using acceleration = v^2/r | M1 |
| acceleration = 18^2/45 | M1 |
| acceleration = 7.2 m/s^2 | A1 |
| Final answer: 7.2 m/s^2 | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| using work done = mgh | M1 |
| work done = 120 x 9.81 x 2.0 = 2350 J | A1 |
| using power = work done/time | M1 |
| power = 2350/0.80 = 2940 W | A1 |
| Final answer: 2940 W (2.94 kW) | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| using p1 V1 = p2 V2 | M1 |
| rearranging to p2 = p1 V1/V2 | M1 |
| p2 = 1.5x10^5 x 4.0x10^-3/2.5x10^-3 | A1 |
| p2 = 2.4x10^5 Pa | A1 |
| Final answer: p2 = 2.4 x 10^5 Pa | |
| Question 7[2 marks] | |
|---|---|
| Answer or working | Marks |
| k(total) = 80 + 80 = 160 N/m | A1 |
| the parallel combination is stiffer (has a greater spring constant) than a single spring | B1 |
| Final answer: k(total) = 160 N/m; the parallel combination is stiffer than a single spring | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| using f(new)/f(old) = sqrt(m(old)/m(new)) | M1 |
| f(new) = 4.0/2 = 2.0 Hz | A1 |
| Final answer: new frequency = 2.0 Hz (the period doubles) | |
| Question 9[2 marks] | |
|---|---|
| Answer or working | Marks |
| evaluating cos^2(60 degrees) = 0.25 | M1 |
| transmitted fraction = (1/2) x 0.25 = 0.125 = 1/8 of I0; credit the fraction once | A1 |
| Final answer: Transmitted intensity = 0.125 I0 (one eighth of the original intensity) | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| recognising the weight acts at the centre of the beam, 1.5 m from the pivot | M1 |
| taking moments about the pivot: T x 2.0 = 80 x 1.5 | M1 |
| T = 60 N | A1 |
| Final answer: 60 N | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| using E = V/d | M1 |
| E = 400/5.0x10^-3 = 8.0x10^4 V/m | A1 |
| using F = qE | M1 |
| F = 1.6x10^-4 N | A1 |
| Final answer: E = 8.0 x 10^4 V/m, F = 1.6 x 10^-4 N | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| angular frequency = 2 pi/T = 2 pi/0.80 = 7.85 rad/s | M1 |
| using maximum speed = angular frequency x amplitude | M1 |
| maximum speed = 7.85 x 0.060 = 0.471 m/s | A1 |
| maximum acceleration = angular frequency^2 x amplitude = 7.85^2 x 0.060 = 3.70 m/s^2 | A1 |
| Final answer: maximum speed = 0.471 m/s, maximum acceleration = 3.70 m/s^2 | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| using height gained = distance along slope x sin(angle) | M1 |
| height gained = 12 x sin(15) = 3.11 m | A1 |
| using GPE = mgh | M1 |
| GPE = 55 x 9.81 x 3.11 = 1680 J | A1 |
| Final answer: 1680 J | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| using current = power/voltage | M1 |
| current = 3000/240 | M1 |
| current = 12.5 A | A1 |
| the 13 A fuse should be used, because it is the smallest of the given ratings that is still greater than the normal operating current | B1 |
| Final answer: current = 12.5 A; use the 13 A fuse, since it is the smallest rating that exceeds the normal operating current | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| t = sqrt(2h/g) = sqrt(2 x 45/9.81), using initial vertical velocity zero | M1 |
| t = 3.03 s; accept 3.0 s | A1 |
| horizontal distance = 12 x t using unrounded time | M1 |
| horizontal distance = 36.3 m; accept 36 m | A1 |
| Final answer: t = 3.03 s, horizontal distance = 36.3 m | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| using stress = force/area | M1 |
| stress = 25/3.0x10^-7 = 8.33x10^7 Pa | A1 |
| using strain = stress/Young modulus | M1 |
| strain = 8.33x10^7/1.1x10^11 | M1 |
| extension = strain x length = 1.89x10^-3 m | A1 |
| Final answer: 1.89 x 10^-3 m | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| combining the parallel resistors to 4.0 ohm and adding the 5.0 ohm series resistor to give 9.0 ohm total | M1 |
| total current = 9.0/9.0 = 1.0 A | A1 |
| battery power = V I = 9.0 x 1.0 = 9.0 W | A1 |
| power in the 5.0 ohm resistor = 1.0^2 x 5.0 = 5.0 W | A1 |
| power in the 6.0 ohm resistor = 4.0^2/6.0 = 8/3 W, about 2.67 W | A1 |
| power in the 12 ohm resistor = 4.0^2/12 = 4/3 W, about 1.33 W, completing the demonstration that 5.0 + 8/3 + 4/3 = 9.0 W equals the battery power | A1 |
| Final answer: total resistance = 9.0 ohm, total current = 1.0 A, total power = 9.0 W; the individual powers (5.0 W + 2.67 W + 1.33 W) sum to 9.0 W, confirming energy conservation | |
| Question 18[3 marks] | |
|---|---|
| Answer or working | Marks |
| converting 4.0 MHz to 4.0x10^6 Hz | M1 |
| applying delta f = 2 x 4.0x10^6 x 0.25/1600 | M1 |
| delta f = +1250 Hz = +1.25 kHz; accept +1.3 kHz to 2 significant figures | A1 |
| Final answer: Doppler shift = +1250 Hz = +1.25 kHz (about +1.3 kHz to 2 significant figures); approaching blood raises the received frequency. | |
| Question 19[5 marks] | |
|---|---|
| Answer or working | Marks |
| using R = resistivity x length/area, with area proportional to diameter^2 | M1 |
| R(X)/R(Y) = (L(X)/L(Y)) x (d(Y)/d(X))^2 | M1 |
| L(X)/L(Y) = 3.0/1.5 = 2 | M1 |
| (d(Y)/d(X))^2 = (0.30/0.60)^2 = 0.25 | M1 |
| R(X)/R(Y) = 2 x 0.25 = 0.5 | A1 |
| Final answer: R(X) : R(Y) = 0.5 : 1 (wire X has half the resistance of wire Y) | |
| Question 20[6 marks] | |
|---|---|
| Answer or working | Marks |
| using elastic strain energy = 0.5 x force x extension for the elastic region | M1 |
| elastic strain energy = 0.5 x 80 x 0.0030 = 0.12 J | A1 |
| work in the plastic region = 80 x (0.0050 - 0.0030) | M1 |
| work in the plastic region = 0.16 J | A1 |
| total work done by the force = 0.12 + 0.16 = 0.28 J, energy dissipated = total work - elastic energy recovered on unloading | M1 |
| energy dissipated = 0.28 - 0.12 = 0.16 J | A1 |
| Final answer: elastic strain energy stored = 0.12 J, work done in the plastic region = 0.16 J, energy dissipated as heat = 0.16 J | |
| Question 21[2 marks] | |
|---|---|
| Answer or working | Marks |
| f' = 600 x (340 + 15)/340 | M1 |
| f' = 626 Hz; accept 6.3x10^2 Hz to 2 significant figures | A1 |
| Final answer: Observed frequency = 600 x (340 + 15)/340 = 626 Hz (about 6.3 x 10^2 Hz to 2 significant figures). | |
| Question 22[6 marks] | |
|---|---|
| Answer or working | Marks |
| GPE gained per second = mgh | M1 |
| GPE per second = 30 x 9.81 x 12 = 3530 W | A1 |
| KE gained per second = 0.5 m v^2 | M1 |
| KE per second = 0.5 x 30 x 4.0^2 = 240 W | A1 |
| useful power output = GPE per second + KE per second = 3530 + 240 = 3770 W | M1 |
| efficiency = 3770/6000 x 100 = 62.9% | A1 |
| Final answer: GPE gained per second = 3530 W, KE gained per second = 240 W, useful power output = 3770 W, efficiency = 62.9% | |