A Level Paper 6: Full Course Review
Covers atomic structure and particles, nuclear physics, wave properties, refraction, diffraction and interference, forces and motion, materials, electric circuits, and thermal physics and ideal gases.
Questions
Question 1 [2 marks]
Wave Properties and Superposition
A point source emits sound uniformly in all directions with a power output of 0.50 W.
Calculate the intensity of the sound at a distance of 4.0 m from the source, using I = P/(4 pi r^2).
Question 2 [2 marks]
Electric Circuits
A wire has a length of 2.5 m, a cross-sectional area of 0.80x10^-6 m^2, and is made from a material of resistivity 1.7x10^-8 Ohm m.
Calculate the resistance of the wire, using R = (resistivity x length)/area.
Question 3 [2 marks]
Refraction, Diffraction and Interference
A ray of light travelling in air is incident on the surface of a liquid of refractive index 1.35 at an angle of incidence of 40 degrees to the normal.
Calculate the angle of refraction, using Snell's law n1 sin(theta1) = n2 sin(theta2).
Question 4 [2 marks]
Forces and Motion
A cyclist travelling at 12 m/s applies the brakes and decelerates uniformly at 2.0 m/s^2.
Calculate the distance the cyclist travels before coming to rest, using v^2 = u^2 + 2as.
Question 5 [3 marks]
Nuclear Physics
A radioactive source has an initial activity of 640 Bq. Its half-life is 8 days.
Calculate the activity of the source after 32 days.
Question 6 [3 marks]
Thermal Physics and Ideal Gases
A quantity of 0.50 kg of water is heated from 20 degC to 80 degC.
Calculate the thermal energy needed, taking the specific heat capacity of water as 4200 J/(kg degC).
Question 7 [4 marks]
Materials
An elastic cord has a spring constant of 120 N/m and obeys Hooke's law. It is stretched from its natural length by 0.40 m.
Calculate (a) the tension in the cord at this extension, and (b) the elastic potential energy stored.
Question 8 [3 marks]
Atomic Structure and Particles
A neutral atom of chlorine-35 has atomic number 17.
State the number of protons, neutrons and electrons in this atom.
Question 9 [2 marks]
Materials
Two identical springs, each of spring constant 80 N/m, support a mass side by side, in parallel, sharing the load equally.
Calculate the combined (effective) spring constant of the parallel combination, using k(total) = k1 + k2, and state how this compares with the spring constant of a single spring.
Question 10 [3 marks]
Refraction, Diffraction and Interference
Monochromatic light of wavelength 632 nm is incident normally on a diffraction grating that has 300 lines per millimetre.
Calculate the angle of the second order maximum, using d sin(theta) = n x wavelength.
Question 11 [3 marks]
Atomic Structure and Particles
In the alpha particle scattering experiment, a beam of alpha particles is directed at a thin gold foil.
Explain why the results of this experiment provide evidence that the nucleus of an atom is small, dense and positively charged.
Question 12 [4 marks]
Forces and Motion
Two ice skaters, of mass 55 kg and 70 kg, are initially at rest and push off from each other. The 55 kg skater moves off at 3.2 m/s. Assume negligible horizontal external impulse during the push.
Calculate the velocity of the 70 kg skater immediately after they push apart, using conservation of momentum, and state the direction of this velocity relative to the first skater.
Question 13 [4 marks]
Thermal Physics and Ideal Gases
A cylinder of volume 0.0200 m^3 contains an ideal gas at a pressure of 1.5x10^5 Pa and a temperature of 300 K. The gas has a molar mass of 32 g/mol (oxygen). Take R = 8.31 J/(mol K).
Calculate (a) the number of moles of gas present, and (b) the density of the gas in the cylinder.
Question 14 [4 marks]
Forces and Motion
A crate of mass 40 kg is pulled across a horizontal floor by a horizontal force of 150 N. A constant frictional force of 62 N opposes the motion.
Calculate (a) the resultant (net) force on the crate, and (b) its acceleration.
Question 15 [4 marks]
Nuclear Physics
A sample of a pure radioactive isotope has a mass of 2.0x10^-3 g and a molar mass of 60 g/mol. Its activity is 4.5x10^9 Bq. Take the Avogadro constant NA = 6.02x10^23 /mol.
Calculate (a) the number of atoms of the isotope present, and (b) the decay constant of the isotope.
Question 16 [4 marks]
Forces and Motion
A trolley of mass 2.0 kg moving at 3.0 m/s collides with a stationary trolley of mass 1.0 kg, and the two trolleys stick together after the collision. Assume the external impulse on the trolleys is negligible during the collision.
Calculate the common velocity of the trolleys immediately after the collision, using conservation of momentum.
Question 17 [4 marks]
Materials
Two springs, each of spring constant 50 N/m, are connected in series.
Calculate the combined (effective) spring constant of the series combination, using 1/k(total) = 1/k1 + 1/k2, and state how this compares with the spring constant of a single spring.
Question 18 [5 marks]
Nuclear Physics
Nucleus X has a binding energy per nucleon of 7.7 MeV and a nucleon number of 12. Nucleus Y has a binding energy per nucleon of 8.5 MeV.
(a) State, with a reason, which nucleus has more tightly bound nucleons.
(b) Calculate the total binding energy of nucleus X, in MeV and in joules. Take 1 MeV = 1.60x10^-13 J.
Question 19 [5 marks]
Atomic Structure and Particles
A nucleus of aluminium-27 (nucleon number A = 27) has a radius given by R = r0 A^(1/3), where r0 = 1.2x10^-15 m.
Calculate (a) the radius of the nucleus, and (b) the density of the nucleus, given its mass is 4.5x10^-26 kg. Model the nucleus as a sphere, of volume (4/3) pi R^3.
Question 20 [4 marks]
Refraction, Diffraction and Interference
An optical fibre has a core of refractive index 1.48 and cladding of refractive index 1.44.
(a) Calculate the critical angle at the core-cladding boundary. (b) State and explain what happens to a light ray inside the core that hits this boundary at an angle greater than the critical angle.
Question 21 [4 marks]
Nuclear Physics
A patient is injected with a radioactive tracer of initial activity 6.0x10^6 Bq and half-life 6.0 hours. Assume radioactive decay is the only cause of loss of tracer activity.
Calculate the percentage of the initial activity remaining after 15 hours, using A = A0 e^(-decay constant x t).
Question 22 [5 marks]
Atomic Structure and Particles
A high-energy photon passing close to a nucleus can convert into a proton-antiproton pair, each of rest mass energy 938 MeV. Neglect the recoil energy of the nearby nucleus when estimating the threshold.
Calculate (a) the minimum (threshold) energy of the photon, in MeV and in joules, and (b) the corresponding threshold frequency and wavelength of the photon, using E = hf and c = f x wavelength. Take h = 6.63x10^-34 J s, c = 3.00x10^8 m/s and 1 MeV = 1.60x10^-13 J.
Question 23 [6 marks]
Materials
A catapult uses elastic material that behaves like a spring of spring constant 800 N/m. It is stretched by 0.25 m and used to launch a pebble of mass 0.020 kg horizontally. Assume all the elastic potential energy is converted to kinetic energy of the pebble, and that friction and air resistance are negligible.
Calculate (a) the elastic potential energy stored, and (b) the launch speed of the pebble.
Question 24 [6 marks]
Nuclear Physics
For a simplified mass-defect calculation for helium-4, use the following approximate nuclear-model masses: helium-4 nucleus 4.0026 u, proton 1.0073 u and neutron 1.0087 u. Treat these supplied numbers as the model data rather than precision tabulated atomic masses. Take 1 u = 931.5 MeV/c^2.
Calculate the binding energy per nucleon of helium-4, in MeV.
Question 25 [6 marks]
Thermal Physics and Ideal Gases
Ice at 0 degC absorbs energy and melts completely into water at 0 degC, with no change in temperature during the melting process, even though energy is continuously being supplied.
(a) Explain, in terms of the molecules and their energy, why the temperature does not change while the ice is melting. (b) The specific latent heat of fusion of ice is 3.34x10^5 J/kg. Calculate the energy needed to melt 0.15 kg of ice.
Question 26 [6 marks]
Electric Circuits
In an experiment, a battery is connected in turn to two different resistors. With a 4.0 ohm resistor connected, the current is 1.20 A. With an 8.0 ohm resistor connected, the current is 0.80 A. Assume the EMF and internal resistance remain constant between measurements.
Using EMF = I(R + r) for each case, calculate the EMF and the internal resistance of the battery.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| I = 0.50/(4 pi x 4.0^2) | M1 |
| I = 2.49x10^-3 W m^-2; accept 2.5x10^-3 W m^-2 | A1 |
| Final answer: I = 2.49 x 10^-3 W/m^2 | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| using R = resistivity x length/area | M1 |
| R = (1.7x10^-8 x 2.5)/(0.80x10^-6) = 0.0531 ohm | A1 |
| Final answer: R = 0.0531 Ohm | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| sin(r) = sin(40 degrees)/1.35, taking air index as 1 | M1 |
| r = 28.4 degrees; accept 28 degrees to 2 significant figures | A1 |
| Final answer: angle of refraction = 28.4 degrees | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| 0 = 12^2 + 2(-2.0)s, or s = 12^2/(2 x 2.0) using the deceleration magnitude | M1 |
| s = 36 m | A1 |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| number of half-lives = 32/8 = 4 | M1 |
| activity = 640/(2^4) | M1 |
| activity = 40 Bq | A1 |
| Final answer: 40 Bq | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific heat capacity x change in temperature | M1 |
| energy = 0.50 x 4200 x 60 | M1 |
| energy = 1.26x10^5 J | A1 |
| Final answer: 1.26 x 10^5 J | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| using T = k x | M1 |
| T = 120 x 0.40 = 48 N | A1 |
| using EPE = 0.5 k x^2 | M1 |
| EPE = 0.5 x 120 x 0.40^2 = 9.6 J | A1 |
| Final answer: tension = 48 N, EPE = 9.6 J | |
| Question 8[3 marks] | |
|---|---|
| Answer or working | Marks |
| 17 protons, from atomic number 17 | B1 |
| 18 neutrons, from nucleon number minus proton number: 35 - 17 | B1 |
| 17 electrons, from neutrality and equality of electron/proton counts | B1 |
| Final answer: 17 protons, 18 neutrons, 17 electrons | |
| Question 9[2 marks] | |
|---|---|
| Answer or working | Marks |
| k(total) = 80 + 80 = 160 N/m | A1 |
| the parallel combination is stiffer (has a greater spring constant) than a single spring | B1 |
| Final answer: k(total) = 160 N/m; the parallel combination is stiffer than a single spring | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| grating spacing d = 1/300 mm = 3.33x10^-6 m | M1 |
| sin(theta) = 2 x (632x10^-9)/(1/(300x1000)) | M1 |
| theta = 22.3 degrees to the normal | A1 |
| Final answer: 22.3 degrees | |
| Question 11[3 marks] | |
|---|---|
| Answer or working | Marks |
| most alpha particles pass straight through or are only slightly deflected, showing the atom is mostly empty space | B1 |
| a small number are deflected through large angles, some almost back the way they came, showing that most of the mass is concentrated in a very small volume | B1 |
| the deflection is caused by electrostatic repulsion between the positive alpha particles and the nucleus, showing the nucleus is positively charged | B1 |
| Final answer: Most alpha particles pass through undeflected, showing the atom is mostly empty space; a few deflect through large angles, showing a small, dense, positively charged nucleus | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| 0 = 55 x 3.2 + 70v, taking first skater motion as positive | M1 |
| v = -(55 x 3.2)/70 | M1 |
| speed = 2.51 m s^-1; accept 2.5 m s^-1 | A1 |
| opposite direction to the 55 kg skater (negative velocity in the chosen convention) | B1 |
| Final answer: 2.51 m/s, in the opposite direction to the 55 kg skater | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| using n = pV/RT | M1 |
| n = (1.5x10^5 x 0.0200)/(8.31 x 300) | M1 |
| n = 1.20 mol, so mass = n x molar mass = 1.20 x 32 = 38.5 g (0.0385 kg) | A1 |
| density = mass/volume = 0.0385/0.0200 = 1.93 kg/m^3 | A1 |
| Final answer: n = 1.20 mol, density = 1.93 kg/m^3 | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| resultant force = 150 - 62 | M1 |
| resultant force = 88 N | A1 |
| a = resultant force/mass = 88/40 | M1 |
| a = 2.2 m s^-2 in the pull direction | A1 |
| Final answer: resultant force = 88 N, acceleration = 2.2 m/s^2 | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles = mass/molar mass = 2.0x10^-3/60 | M1 |
| number of atoms N = moles x NA = 3.33x10^-5 x 6.02x10^23 = 2.01x10^19 | M1 |
| using decay constant = activity/N | M1 |
| decay constant = 4.5x10^9/2.01x10^19 = 2.24x10^-10 /s | A1 |
| Final answer: N = 2.01 x 10^19 atoms, decay constant = 2.24 x 10^-10 /s | |
| Question 16[4 marks] | |
|---|---|
| Answer or working | Marks |
| using conservation of momentum, momentum before = momentum after | M1 |
| momentum before = 2.0 x 3.0 = 6.0 kg m/s | M1 |
| using v = total momentum/total mass, with total mass = 2.0 + 1.0 = 3.0 kg | M1 |
| v = 6.0/3.0 = 2.0 m/s | A1 |
| Final answer: Common velocity = (2.0 x 3.0)/(2.0 + 1.0) = 2.0 m s^-1 in the original direction of the moving trolley. | |
| Question 17[4 marks] | |
|---|---|
| Answer or working | Marks |
| using 1/k(total) = 1/k1 + 1/k2 | M1 |
| 1/k(total) = 1/50 + 1/50 = 2/50 | M1 |
| k(total) = 25 N/m | A1 |
| the series combination is less stiff (has a smaller spring constant) than a single spring, since each spring stretches under the same force, giving twice the total extension | B1 |
| Final answer: k(total) = 25 N/m; the series combination is less stiff than a single spring | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| identifying nucleus Y as having more tightly bound nucleons | B1 |
| explaining Y has higher binding energy per nucleon, requiring more energy per nucleon to separate it | B1 |
| total binding energy of X = 7.7 x 12 | M1 |
| total binding energy = 92.4 MeV | A1 |
| total binding energy in joules = 92.4 x 1.60x10^-13 = 1.48x10^-11 J | A1 |
| Final answer: Y has more tightly bound nucleons because its binding energy per nucleon, 8.5 MeV, exceeds 7.7 MeV. Total binding energy of X = 12 x 7.7 = 92.4 MeV = 1.48 x 10^-11 J; accept 92 MeV and 1.5 x 10^-11 J to 2 significant figures. | |
| Question 19[5 marks] | |
|---|---|
| Answer or working | Marks |
| using R = r0 A^(1/3) | M1 |
| R = 1.2x10^-15 x 27^(1/3) = 3.6x10^-15 m | A1 |
| volume = (4/3) pi R^3 | M1 |
| volume = 1.95x10^-43 m^3 | A1 |
| density = mass/volume = 4.5x10^-26/1.95x10^-43 = 2.30x10^17 kg/m^3 | A1 |
| Final answer: R = 3.6 x 10^-15 m, density = 2.30 x 10^17 kg/m^3 | |
| Question 20[4 marks] | |
|---|---|
| Answer or working | Marks |
| sin(C) = n(cladding)/n(core) = 1.44/1.48 | M1 |
| C = 76.6 degrees; accept 77 degrees | A1 |
| total internal reflection back into the core | B1 |
| explaining that light goes from higher to lower refractive index and incidence to the normal exceeds C | B1 |
| Final answer: C = 76.6 degrees; total internal reflection occurs, keeping the light within the core | |
| Question 21[4 marks] | |
|---|---|
| Answer or working | Marks |
| decay constant = ln(2)/6.0 per hour | M1 |
| remaining fraction = exp(-ln(2) x 15/6.0) | M1 |
| converting fraction to percentage by multiplying by 100 | M1 |
| percentage = 17.7%; accept 18% to 2 significant figures | A1 |
| Final answer: 17.7% of the initial activity remains | |
| Question 22[5 marks] | |
|---|---|
| Answer or working | Marks |
| approximate threshold = 2 x 938 = 1876 MeV | B1 |
| threshold energy in joules = 1876 x 1.60x10^-13 = 3.0016x10^-10 J (3.00x10^-10 J) | A1 |
| threshold frequency = E/h using energy in joules | M1 |
| frequency = 4.53x10^23 Hz | A1 |
| wavelength = c/f = 6.63x10^-16 m | A1 |
| Final answer: minimum energy = 1876 MeV (3.00 x 10^-10 J), threshold frequency = 4.53 x 10^23 Hz, wavelength = 6.63 x 10^-16 m | |
| Question 23[6 marks] | |
|---|---|
| Answer or working | Marks |
| using EPE = 0.5 k x^2 | M1 |
| EPE = 0.5 x 800 x 0.25^2 | M1 |
| EPE = 25 J | A1 |
| equating EPE to KE of the pebble: 25 = 0.5 x 0.020 x v^2 | M1 |
| v^2 = 25/(0.5 x 0.020) = 2500 | M1 |
| v = 50 m/s | A1 |
| Final answer: EPE stored = 25 J, launch speed = 50 m/s | |
| Question 24[6 marks] | |
|---|---|
| Answer or working | Marks |
| mass of constituent nucleons = 2(1.0073) + 2(1.0087) | M1 |
| mass of constituent nucleons = 4.0320 u | A1 |
| mass defect = 4.0320 - 4.0026 | M1 |
| mass defect = 0.0294 u | A1 |
| binding energy = 0.0294 x 931.5 = 27.4 MeV, then divide by 4 nucleons | M1 |
| binding energy per nucleon = 6.85 MeV | A1 |
| Final answer: Mass defect = 2(1.0073) + 2(1.0087) - 4.0026 = 0.0294 u. Binding energy = 0.0294 x 931.5 = 27.3861 MeV. Binding energy per nucleon = 27.3861/4 = 6.85 MeV. | |
| Question 25[6 marks] | |
|---|---|
| Answer or working | Marks |
| the energy supplied during melting increases the potential energy of the molecules | B1 |
| by weakening (breaking down) the bonds holding the molecules in the fixed, ordered structure of the solid | B1 |
| temperature is a measure of the average kinetic energy of the molecules, and this does not increase during melting, so the temperature stays constant | B1 |
| using energy = mass x specific latent heat of fusion | M1 |
| energy = 0.15 x 3.34x10^5 | M1 |
| energy = 5.01x10^4 J | A1 |
| Final answer: The energy increases the molecules' potential energy (breaking bonds) rather than their kinetic energy, so temperature stays constant; energy needed to melt 0.15 kg = 5.01 x 10^4 J | |
| Question 26[6 marks] | |
|---|---|
| Answer or working | Marks |
| using EMF = I(R + r) for both cases | M1 |
| EMF = 1.20(4.0 + r) = 4.8 + 1.20r, and EMF = 0.80(8.0 + r) = 6.4 + 0.80r | M1 |
| setting the two expressions equal: 4.8 + 1.20r = 6.4 + 0.80r | M1 |
| solving the simultaneous equations by elimination: 0.40r = 1.6 | M1 |
| EMF = 4.8 + (1.20 x 4.0) = 9.6 V | A1 |
| internal resistance r = 4.0 ohm | A1 |
| Final answer: EMF = 9.6 V, internal resistance = 4.0 ohm | |