AS Paper 1: Core Skills
Covers refraction, diffraction and interference, forces and motion, work, energy and power, materials, and electric circuits.
Questions
Question 1 [2 marks]
Refraction, Diffraction and Interference
Light of wavelength 589 nm travels from air into a block of glass of refractive index 1.52.
Calculate the speed of light in the glass. Take the speed of light in air as 3.00x10^8 m/s.
Question 2 [2 marks]
Materials
A spring extends by 0.080 m when a force of 6.0 N is applied.
Calculate the spring constant of the spring.
Question 3 [2 marks]
Electric Circuits
Resistance relates the potential difference across a component to the current through it.
Define electrical resistance and state its unit.
Question 4 [2 marks]
Refraction, Diffraction and Interference
A ray of light travelling in air is incident on the surface of a liquid of refractive index 1.35 at an angle of incidence of 40 degrees to the normal.
Calculate the angle of refraction, using Snell's law n1 sin(theta1) = n2 sin(theta2).
Question 5 [3 marks]
Work, Energy and Power
A force of 60 N is applied to a box at an angle of 30 degrees to the direction of motion, and the box moves 8.0 m.
Calculate the work done by the force, using W = F d cos(theta).
Question 6 [3 marks]
Forces and Motion
A car accelerates uniformly from rest to a speed of 24 m/s in 6.0 s.
Calculate the acceleration of the car and the distance it travels in this time.
Question 7 [3 marks]
Refraction, Diffraction and Interference
A swimming pool has a real depth of 2.4 m of water (refractive index 1.33).
Calculate the apparent depth of the pool when viewed from directly above, using apparent depth = real depth/refractive index, and state one practical consequence of this effect.
Question 8 [2 marks]
Materials
Two identical springs, each of spring constant 80 N/m, support a mass side by side, in parallel, sharing the load equally.
Calculate the combined (effective) spring constant of the parallel combination, using k(total) = k1 + k2, and state how this compares with the spring constant of a single spring.
Question 9 [4 marks]
Refraction, Diffraction and Interference
In a Young's double-slit experiment using light of wavelength 550 nm, the slit separation is 0.30 mm and the screen is 1.8 m from the slits.
(a) Calculate the fringe spacing observed. (b) State and explain what would happen to the fringe spacing if the slit separation were halved, with everything else unchanged.
Question 10 [4 marks]
Electric Circuits
A device is rated '240 V, 3.0 kW'.
Calculate the normal operating current of the device, and state the minimum rating of fuse (from 3 A, 5 A, 13 A) that should be used to protect it, explaining your choice.
Question 11 [4 marks]
Forces and Motion
A trolley of mass 2.0 kg moving at 3.0 m/s collides with a stationary trolley of mass 1.0 kg, and the two trolleys stick together after the collision. Assume the external impulse on the trolleys is negligible during the collision.
Calculate the common velocity of the trolleys immediately after the collision, using conservation of momentum.
Question 12 [4 marks]
Electric Circuits
A battery of EMF 9.0 V and internal resistance 0.50 ohm is connected to an external resistor of resistance 4.0 ohm.
Calculate the current in the circuit and the terminal potential difference of the battery.
Question 13 [5 marks]
Materials
Two wires, P and Q, have the same length and cross-sectional area and are each stretched by the same tensile force. Wire P has a Young modulus of 2.0x10^11 Pa and wire Q has a Young modulus of 1.0x10^11 Pa. Assume the wire or wires remain in their linear elastic regions.
Calculate the ratio of the extension of wire Q to the extension of wire P, and explain your answer in terms of the stiffness of the two wires.
Question 14 [4 marks]
Work, Energy and Power
In a power station, fuel provides chemical energy at a rate of 500 MW. The boiler and turbine convert 40% of this into kinetic energy of the turbine, and the generator then converts 95% of that kinetic energy into electrical energy.
Calculate (a) the overall efficiency of the power station, and (b) the useful electrical power output.
Question 15 [4 marks]
Refraction, Diffraction and Interference
In a Young's double-slit experiment, 9 bright fringes are observed to span a distance of 20.0 mm on a screen (spanning 8 fringe spacings). The slit separation is 0.40 mm and the screen is 2.0 m from the slits.
Calculate (a) the fringe spacing, and (b) the wavelength of the light used.
Question 16 [6 marks]
Forces and Motion
A block of mass 8.0 kg is released from rest on a rough slope inclined at 25 degrees to the horizontal. The coefficient of friction between the block and the slope is 0.20. Take g = 9.81 m/s^2. Take the stated coefficient of friction to apply both at limiting static friction and while sliding.
Calculate (a) the component of the block's weight acting down the slope, (b) the normal reaction force, (c) the frictional force, and (d) the resulting acceleration of the block down the slope.
Question 17 [6 marks]
Electric Circuits
A battery of EMF 12 V and internal resistance 1.0 ohm is connected to two resistors in parallel, 6.0 ohm and 3.0 ohm, which are then in series with a 2.0 ohm resistor.
Calculate (a) the total resistance of the circuit, including the internal resistance, (b) the current drawn from the battery, and (c) the terminal potential difference of the battery.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| v = c/n = (3.00x10^8)/1.52 | M1 |
| v = 1.97x10^8 m s^-1 | A1 |
| Final answer: 1.97 x 10^8 m/s | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| using k = F/x | M1 |
| k = 75 N/m | A1 |
| Final answer: 75 N/m | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| resistance = potential difference/current (R = V/I) | B1 |
| the unit is the ohm | B1 |
| Final answer: Resistance is the ratio of potential difference to current (R = V/I); its unit is the ohm | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| sin(r) = sin(40 degrees)/1.35, taking air index as 1 | M1 |
| r = 28.4 degrees; accept 28 degrees to 2 significant figures | A1 |
| Final answer: angle of refraction = 28.4 degrees | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| using W = F d cos(theta) | M1 |
| W = 60 x 8.0 x cos(30) | M1 |
| W = 416 J | A1 |
| Final answer: 416 J | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| acceleration = (v - u)/t = 24/6.0 = 4.0 m/s^2 | M1 |
| s = ut + 0.5 a t^2 | M1 |
| s = 0 + 0.5 x 4.0 x 6.0^2 = 72 m | A1 |
| Final answer: acceleration = 4.0 m/s^2, distance = 72 m | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| apparent depth = 2.4/1.33 | M1 |
| apparent depth = 1.80 m; accept 1.8 m | A1 |
| a practical consequence such as underestimating actual depth when entering the pool | B1 |
| Final answer: Apparent depth = 2.4/1.33 = 1.8 m. The pool looks shallower than it is, so someone entering it may underestimate the actual depth. | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| k(total) = 80 + 80 = 160 N/m | A1 |
| the parallel combination is stiffer (has a greater spring constant) than a single spring | B1 |
| Final answer: k(total) = 160 N/m; the parallel combination is stiffer than a single spring | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| using fringe spacing w = wavelength D/s | M1 |
| w = (550x10^-9 x 1.8)/0.30x10^-3 = 3.3x10^-3 m (3.3 mm) | A1 |
| predicting that halving slit separation doubles the fringe spacing (to 6.6 mm if stated) | B1 |
| explaining w is inversely proportional to s at fixed wavelength and D | B1 |
| Final answer: fringe spacing = 3.3 mm; halving the slit separation would double the fringe spacing to 6.6 mm | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| using current = power/voltage | M1 |
| current = 3000/240 | M1 |
| current = 12.5 A | A1 |
| the 13 A fuse should be used, because it is the smallest of the given ratings that is still greater than the normal operating current | B1 |
| Final answer: current = 12.5 A; use the 13 A fuse, since it is the smallest rating that exceeds the normal operating current | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| using conservation of momentum, momentum before = momentum after | M1 |
| momentum before = 2.0 x 3.0 = 6.0 kg m/s | M1 |
| using v = total momentum/total mass, with total mass = 2.0 + 1.0 = 3.0 kg | M1 |
| v = 6.0/3.0 = 2.0 m/s | A1 |
| Final answer: Common velocity = (2.0 x 3.0)/(2.0 + 1.0) = 2.0 m s^-1 in the original direction of the moving trolley. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| using current = EMF/(R + r) | M1 |
| current = 9.0/(4.0 + 0.50) = 2.0 A | A1 |
| terminal pd = EMF - (current x internal resistance) | M1 |
| terminal pd = 9.0 - (2.0 x 0.50) = 8.0 V | A1 |
| Final answer: current = 2.0 A, terminal pd = 8.0 V | |
| Question 13[5 marks] | |
|---|---|
| Answer or working | Marks |
| the stress is the same in both wires, since they have the same applied force and cross-sectional area | M1 |
| strain = stress/Young modulus, so for fixed length the extension is proportional to 1/Young modulus | M1 |
| ratio of extensions = Young modulus of P/Young modulus of Q | M1 |
| ratio = 2.0x10^11/1.0x10^11 = 2 | A1 |
| wire Q, having the lower Young modulus (less stiff), extends twice as much as wire P | B1 |
| Final answer: extension of Q is twice the extension of P, because Q has half the Young modulus and so is less stiff | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| using overall efficiency = product of the efficiencies of each stage | M1 |
| overall efficiency = 0.38 (38%) | A1 |
| using output power = input power x overall efficiency | M1 |
| output power = 190 MW | A1 |
| Final answer: overall efficiency = 38%, electrical power output = 190 MW | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| fringe spacing = 20.0/8 mm | M1 |
| fringe spacing = 2.50 mm | A1 |
| wavelength = ws/D = (2.50x10^-3)(0.40x10^-3)/2.0 | M1 |
| wavelength = 5.0x10^-7 m = 500 nm | A1 |
| Final answer: fringe spacing = 2.5 mm, wavelength = 5.0 x 10^-7 m (500 nm) | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| component of weight down slope = mg sin(25 degrees) | M1 |
| component = 33.16708118 N, displayed as 33.2 N | A1 |
| normal reaction = mg cos(25 degrees) = 71.12703513 N | M1 |
| friction = 0.20 x unrounded normal reaction, acting up the slope | M1 |
| friction = 14.22540703 N, displayed as 14.2 N | A1 |
| acceleration = g(sin(25) - 0.20 cos(25)) = 2.36770927 m s^-2, displayed as 2.37 m s^-2; accept 2.4 m s^-2 | A1 |
| Final answer: component down the slope = 33.2 N, normal reaction = 71.1 N, friction = 14.2 N, acceleration = 2.37 m/s^2 | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| using 1/Rp = 1/6.0 + 1/3.0 | M1 |
| Rp = 2.0 ohm | A1 |
| total external resistance = 2.0 + 2.0 = 4.0 ohm | M1 |
| total circuit resistance (including internal resistance) = 4.0 + 1.0 = 5.0 ohm, and current = EMF/total resistance | M1 |
| current = 12/5.0 = 2.4 A | A1 |
| terminal pd = 12 - (2.4 x 1.0) = 9.6 V | A1 |
| Final answer: total resistance = 5.0 ohm, current = 2.4 A, terminal pd = 9.6 V | |