Revision Library
Choose a subject
Menu
Physics
Need a new topic?
Missing a topic, found a bug, or want something added?

AS Paper 4: Mechanics and Materials

Covers wave properties, refraction, diffraction and interference, forces and motion, work, energy and power, materials, and electric circuits.

21 questions - 80 marks - calculator allowed

Download PDF

Open A Level Physics workspace

Questions

Question 1 [2 marks]

Wave Properties and Superposition

Waves can be classified as transverse or longitudinal.

State two differences between transverse waves and longitudinal waves.

Question 2 [2 marks]

Materials

A spring extends by 0.080 m when a force of 6.0 N is applied.

Calculate the spring constant of the spring.

Question 3 [2 marks]

Refraction, Diffraction and Interference

Total internal reflection can occur at a boundary between two transparent media.

State the two conditions that must both be met for total internal reflection to occur at such a boundary.

Question 4 [2 marks]

Electric Circuits

Resistance relates the potential difference across a component to the current through it.

Define electrical resistance and state its unit.

Question 5 [2 marks]

Wave Properties and Superposition

A stationary (standing) wave is formed on a string.

State what is meant by a node and by an antinode on a stationary wave.

Question 6 [3 marks]

Work, Energy and Power

A force of 60 N is applied to a box at an angle of 30 degrees to the direction of motion, and the box moves 8.0 m.

Calculate the work done by the force, using W = F d cos(theta).

Question 7 [3 marks]

Forces and Motion

A uniform plank of weight 200 N and length 4.0 m is balanced on a pivot at its centre. A child of weight 250 N sits 1.2 m from the pivot on one side.

Calculate the distance from the pivot at which a second child of weight 300 N must sit on the other side for the plank to balance.

Question 8 [2 marks]

Wave Properties and Superposition

Unpolarised light of intensity I0 passes through a polarising filter, which transmits half of the incident intensity, and then through a second polarising filter whose transmission axis is at 60 degrees to that of the first.

Using Malus's law, I = I1 cos^2(theta), calculate the intensity transmitted through the second filter as a fraction of I0.

Question 9 [4 marks]

Work, Energy and Power

A ball of mass 0.50 kg has a momentum of 6.0 kg m/s.

Calculate (a) the speed of the ball, and (b) its kinetic energy, using KE = p^2/(2m).

Question 10 [4 marks]

Wave Properties and Superposition

Two coherent waves emitted in phase of wavelength 0.60 m arrive at a point with a path difference of 0.15 m.

Calculate the phase difference between the two waves, in degrees, and state, with a reason, whether this point is a position of maximum constructive interference, complete destructive interference, or neither.

Question 11 [4 marks]

Forces and Motion

A block of mass 6.0 kg on a smooth (frictionless) horizontal surface is pulled by a rope that makes an angle of 25 degrees with the horizontal. The tension in the rope is 40 N.

Calculate (a) the horizontal component of the tension, and (b) the resulting horizontal acceleration of the block.

Question 12 [4 marks]

Wave Properties and Superposition

Two loudspeakers emit sound waves of the same frequency and are in phase. A microphone is moved along a line parallel to the line joining the speakers.

At one point of destructive interference, the path length from speaker A is 2.55 m and from speaker B is 3.40 m. This point corresponds to (n + 1/2) wavelengths with n = 2. The speed of sound is 340 m/s. Calculate the wavelength and the frequency of the sound.

Question 13 [5 marks]

Forces and Motion

A car accelerates uniformly from rest to 18 m/s in 6.0 s, then travels at this constant velocity for 20 s, and finally decelerates uniformly to rest in 4.0 s.

Calculate (a) the total distance travelled by the car, and (b) the average velocity for the whole journey.

Question 14 [5 marks]

Electric Circuits

A battery of EMF 12 V and internal resistance 2.0 ohm is connected to an external resistor of resistance 10 ohm.

Calculate (a) the current in the circuit, (b) the power dissipated in the external resistor, and (c) the power wasted in the internal resistance.

Question 15 [5 marks]

Work, Energy and Power

A trolley of mass 2.0 kg moving at 4.0 m/s collides with a stationary trolley of mass 2.0 kg. After the collision, the first trolley is at rest and the second moves off at 4.0 m/s.

Calculate the total kinetic energy before and after the collision, and state whether the collision is elastic or inelastic.

Question 16 [5 marks]

Electric Circuits

In a circuit, a 12 V battery of negligible internal resistance is connected to a 10 ohm resistor in series with a parallel combination of a 20 ohm resistor and a 30 ohm resistor.

Calculate (a) the combined resistance of the parallel section, (b) the total current from the battery, and (c) the power dissipated in the 10 ohm resistor.

Question 17 [2 marks]

Wave Properties and Superposition

A stationary source emits sound of frequency 600 Hz. An observer moves directly towards the source at a speed of 15 m/s. The speed of sound in air is 340 m/s.

Calculate the frequency heard by the observer, using f' = f (v + vo)/v.

Question 18 [6 marks]

Forces and Motion

A block of mass 8.0 kg is released from rest on a rough slope inclined at 25 degrees to the horizontal. The coefficient of friction between the block and the slope is 0.20. Take g = 9.81 m/s^2. Take the stated coefficient of friction to apply both at limiting static friction and while sliding.

Calculate (a) the component of the block's weight acting down the slope, (b) the normal reaction force, (c) the frictional force, and (d) the resulting acceleration of the block down the slope.

Question 19 [6 marks]

Electric Circuits

An electric kettle is rated at 2300 W when connected to the 230 V mains supply. It contains 1.2 kg of water at 20 degC.

Calculate (a) the current drawn by the kettle in normal operation, (b) the resistance of the kettle's heating element, and (c) the time taken to heat the water to 100 degC, assuming all the electrical energy is transferred to the water. Take the specific heat capacity of water as 4200 J/(kg degC).

Question 20 [6 marks]

Forces and Motion

A mass of 5.0 kg hangs in equilibrium from a point where two strings meet. String P rises from this point at 25 degrees to the vertical on one side, and string Q rises at 40 degrees to the vertical on the other side, both attached to a fixed horizontal ceiling above. Take g = 9.81 m/s^2.

By resolving forces horizontally and vertically at the point where the strings meet, calculate the tension in string P and the tension in string Q.

Question 21 [6 marks]

Materials

A brittle material has a breaking stress of 4.5x10^8 Pa and a Young modulus of 9.0x10^10 Pa. A rod made from this material has a cross-sectional area of 2.0x10^-5 m^2 and a length of 0.80 m, and obeys a linear stress-strain relation right up to breaking.

Calculate (a) the maximum tensile force the rod can withstand before breaking, and (b) the extension of the rod at the point of breaking.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
in a transverse wave the oscillations are perpendicular to the direction of energy transfer, while in a longitudinal wave they are parallel to itB1
transverse waves can be polarised, but longitudinal waves cannotB1
Final answer: Transverse: oscillations perpendicular to propagation, can be polarised. Longitudinal: oscillations parallel to propagation, cannot be polarised
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
using k = F/xM1
k = 75 N/mA1
Final answer: 75 N/m
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
light must be travelling from an optically denser medium into a less dense medium (from a higher to a lower refractive index)B1
the angle of incidence at the boundary must be greater than the critical angleB1
Final answer: Light travels from a denser to a less dense medium, and the angle of incidence exceeds the critical angle
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
resistance = potential difference/current (R = V/I)B1
the unit is the ohmB1
Final answer: Resistance is the ratio of potential difference to current (R = V/I); its unit is the ohm
Mark scheme for Question 5 [2 marks]
Question 5[2 marks]
Answer or workingMarks
a node is a point of permanently zero displacement (zero amplitude)B1
an antinode is a point of maximum amplitude of oscillationB1
Final answer: A node has zero amplitude; an antinode has maximum amplitude
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
using W = F d cos(theta)M1
W = 60 x 8.0 x cos(30)M1
W = 416 JA1
Final answer: 416 J
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
the plank's own weight acts at the pivot, so it provides no moment about the pivotM1
taking moments about the pivot: 250 x 1.2 = 300 x dM1
d = 1.0 mA1
Final answer: 1.0 m
Mark scheme for Question 8 [2 marks]
Question 8[2 marks]
Answer or workingMarks
evaluating cos^2(60 degrees) = 0.25M1
transmitted fraction = (1/2) x 0.25 = 0.125 = 1/8 of I0; credit the fraction onceA1
Final answer: Transmitted intensity = 0.125 I0 (one eighth of the original intensity)
Mark scheme for Question 9 [4 marks]
Question 9[4 marks]
Answer or workingMarks
using v = p/mM1
v = 6.0/0.50 = 12 m/sA1
using KE = p^2/(2m)M1
KE = 36 JA1
Final answer: v = 12 m/s, KE = 36 J
Mark scheme for Question 10 [4 marks]
Question 10[4 marks]
Answer or workingMarks
phase difference = 360 x path difference/wavelength = 360 x 0.15/0.60M1
phase difference = 90 degreesA1
classifying the point as neither maximum constructive nor complete destructive interferenceB1
explaining that 90 degrees is neither 0 modulo 360 nor 180 modulo 360B1
Final answer: phase difference = 90 degrees; neither fully constructive nor fully destructive, since 90 degrees is neither a multiple of 360 nor an odd multiple of 180
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
horizontal tension = 40 cos(25 degrees)M1
horizontal component = 36.3 N; accept 36 NA1
a = horizontal resultant force/massM1
a = 6.04 m s^-2; accept 6.0 m s^-2A1
Final answer: horizontal component = 36.3 N, acceleration = 6.04 m/s^2
Mark scheme for Question 12 [4 marks]
Question 12[4 marks]
Answer or workingMarks
path difference = 3.40 - 2.55 = 0.85 mM1
0.85 = 2.5 x wavelengthM1
wavelength = 0.34 mA1
frequency = 340/0.34 = 1000 HzA1
Final answer: wavelength = 0.34 m, frequency = 1000 Hz
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
distance in the acceleration stage = average velocity x time = (0+18)/2 x 6.0 = 54 mM1
distance in the constant-velocity stage = 18 x 20 = 360 mM1
distance in the deceleration stage = (18+0)/2 x 4.0 = 36 mM1
total distance = 54 + 360 + 36 = 450 mA1
average velocity = total distance/total time = 450/30 = 15 m/sA1
Final answer: total distance = 450 m, average velocity = 15 m/s
Mark scheme for Question 14 [5 marks]
Question 14[5 marks]
Answer or workingMarks
using current = EMF/(R + r)M1
current = 12/12 = 1.0 AA1
using power = I^2 R for the external resistorM1
power in the external resistor = 1.0^2 x 10 = 10 WA1
power wasted in the internal resistance = 1.0^2 x 2.0 = 2.0 WA1
Final answer: current = 1.0 A, power in external resistor = 10 W, power wasted internally = 2.0 W
Mark scheme for Question 15 [5 marks]
Question 15[5 marks]
Answer or workingMarks
using KE = 0.5 m v^2 for the first trolley before the collisionM1
KE before = 0.5 x 2.0 x 4.0^2 = 16 JA1
using KE = 0.5 m v^2 for the second trolley after the collisionM1
KE after = 0.5 x 2.0 x 4.0^2 = 16 JA1
since KE before equals KE after, the collision is elasticB1
Final answer: KE before = 16 J, KE after = 16 J; the collision is elastic (kinetic energy is conserved)
Mark scheme for Question 16 [5 marks]
Question 16[5 marks]
Answer or workingMarks
using 1/Rp = 1/20 + 1/30M1
Rp = 12 ohmA1
total resistance = 10 + 12 = 22 ohm, and current = pd/total resistanceM1
current = 12/22 = 0.545 AA1
power in the 10 ohm resistor = current^2 x resistance = 0.545^2 x 10 = 2.98 WA1
Final answer: Rp = 12 ohm, current = 0.545 A, power in the 10 ohm resistor = 2.98 W
Mark scheme for Question 17 [2 marks]
Question 17[2 marks]
Answer or workingMarks
f' = 600 x (340 + 15)/340M1
f' = 626 Hz; accept 6.3x10^2 Hz to 2 significant figuresA1
Final answer: Observed frequency = 600 x (340 + 15)/340 = 626 Hz (about 6.3 x 10^2 Hz to 2 significant figures).
Mark scheme for Question 18 [6 marks]
Question 18[6 marks]
Answer or workingMarks
component of weight down slope = mg sin(25 degrees)M1
component = 33.16708118 N, displayed as 33.2 NA1
normal reaction = mg cos(25 degrees) = 71.12703513 NM1
friction = 0.20 x unrounded normal reaction, acting up the slopeM1
friction = 14.22540703 N, displayed as 14.2 NA1
acceleration = g(sin(25) - 0.20 cos(25)) = 2.36770927 m s^-2, displayed as 2.37 m s^-2; accept 2.4 m s^-2A1
Final answer: component down the slope = 33.2 N, normal reaction = 71.1 N, friction = 14.2 N, acceleration = 2.37 m/s^2
Mark scheme for Question 19 [6 marks]
Question 19[6 marks]
Answer or workingMarks
using current = power/voltageM1
current = 2300/230 = 10 AA1
using resistance = voltage/currentM1
resistance = 230/10 = 23 ohmA1
energy needed = mass x specific heat capacity x temperature change = 1.2 x 4200 x 80, time = energy/powerM1
time = 403200/2300 = 175 sA1
Final answer: current = 10 A, resistance = 23 ohm, time to heat the water to 100 degC = 175 s
Mark scheme for Question 20 [6 marks]
Question 20[6 marks]
Answer or workingMarks
resolving horizontally: T(P) sin(25) = T(Q) sin(40)M1
resolving vertically: T(P) cos(25) + T(Q) cos(40) = mg = 5.0 x 9.81 = 49.1 NM1
eliminating T(P) using T(P) = T(Q) sin(40)/sin(25) and substituting into the vertical equationM1
solving the resulting equation for T(Q)M1
T(Q) = 22.9 NA1
T(P) = 34.8 NA1
Final answer: T(P) = 34.8 N, T(Q) = 22.9 N
Mark scheme for Question 21 [6 marks]
Question 21[6 marks]
Answer or workingMarks
using force = stress x areaM1
force = 4.5x10^8 x 2.0x10^-5 = 9000 NA1
using strain = stress/Young modulusM1
strain = 4.5x10^8/9.0x10^10 = 5.0x10^-3A1
using extension = strain x lengthM1
extension = 5.0x10^-3 x 0.80 = 4.0x10^-3 mA1
Final answer: maximum force = 9000 N (9.0 kN), extension at breaking = 4.0 x 10^-3 m (4.0 mm)

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.