AS Paper 6: Full Course Review
Covers atomic structure and particles, particle interactions, wave properties, refraction, diffraction and interference, forces and motion, work, energy and power, materials, and electric circuits.
Questions
Question 1 [2 marks]
Wave Properties and Superposition
Waves can be classified as transverse or longitudinal.
State two differences between transverse waves and longitudinal waves.
Question 2 [2 marks]
Refraction, Diffraction and Interference
A ray of light travelling in air is incident on the surface of a liquid of refractive index 1.35 at an angle of incidence of 40 degrees to the normal.
Calculate the angle of refraction, using Snell's law n1 sin(theta1) = n2 sin(theta2).
Question 3 [2 marks]
Particle Interactions and the Standard Model
A proton is made from two up quarks and one down quark; a neutron is made from one up quark and two down quarks.
Given the quark charges up = +2/3 e and down = -1/3 e, state the quark composition of a proton and of a neutron, and use this to show that the neutron is electrically neutral.
Question 4 [2 marks]
Electric Circuits
Resistance relates the potential difference across a component to the current through it.
Define electrical resistance and state its unit.
Question 5 [3 marks]
Forces and Motion
A uniform plank of weight 200 N and length 4.0 m is balanced on a pivot at its centre. A child of weight 250 N sits 1.2 m from the pivot on one side.
Calculate the distance from the pivot at which a second child of weight 300 N must sit on the other side for the plank to balance.
Question 6 [3 marks]
Work, Energy and Power
A crane lifts a load of mass 250 kg through a vertical height of 8.0 m in 5.0 s, at constant speed.
Taking g = 9.81 m/s^2, calculate the useful power output of the crane.
Question 7 [4 marks]
Atomic Structure and Particles
A photon of electromagnetic radiation has a frequency of 6.0x10^14 Hz.
Calculate the energy of the photon in joules, and convert this to electron-volts. Take h = 6.63x10^-34 J s and e = 1.60x10^-19 C.
Question 8 [4 marks]
Materials
A wire of cross-sectional area 3.0x10^-7 m^2 is under a tensile stress of 1.8x10^8 Pa.
Calculate (a) the tension force in the wire, and (b) if the wire's original length is 1.5 m and it experiences a strain of 0.0020, its extension.
Question 9 [3 marks]
Particle Interactions and the Standard Model
A neutral kaon (K0, strangeness +1) is suggested to decay as K0 -> pi+ + pi-, where each pion has strangeness 0.
Using conservation of strangeness, determine whether this decay proceeds via the strong interaction or the weak interaction, given that strangeness is always conserved in the strong interaction but need not be conserved in the weak interaction.
Question 10 [3 marks]
Electric Circuits
A copper wire of cross-sectional area 2.0x10^-6 m^2 carries a current of 3.0 A. The number density of free electrons in copper is 8.5x10^28 per m^3 and the magnitude of the electron charge is 1.60x10^-19 C.
Calculate the mean drift speed of the electrons, using I = nAvq, and state their direction relative to conventional current.
Question 11 [3 marks]
Wave Properties and Superposition
Two loudspeakers emit coherent sound waves of wavelength 0.68 m, in phase with each other.
A point of constructive interference is observed where the path difference from the two speakers is 2.04 m. Determine the order (n) of this constructive interference, and state the condition, in terms of wavelength, for constructive interference to occur at a point.
Question 12 [3 marks]
Work, Energy and Power
A pendulum bob of mass 0.20 kg is released from rest at a height of 0.15 m above its lowest point. Air resistance is negligible.
Calculate the speed of the bob as it passes through the lowest point of its swing, using conservation of energy (loss of gravitational PE = gain in KE). Take g = 9.81 m/s^2.
Question 13 [4 marks]
Electric Circuits
A device is rated '240 V, 3.0 kW'.
Calculate the normal operating current of the device, and state the minimum rating of fuse (from 3 A, 5 A, 13 A) that should be used to protect it, explaining your choice.
Question 14 [4 marks]
Wave Properties and Superposition
Two loudspeakers emit sound waves of the same frequency and are in phase. A microphone is moved along a line parallel to the line joining the speakers.
At one point of destructive interference, the path length from speaker A is 2.55 m and from speaker B is 3.40 m. This point corresponds to (n + 1/2) wavelengths with n = 2. The speed of sound is 340 m/s. Calculate the wavelength and the frequency of the sound.
Question 15 [4 marks]
Electric Circuits
A potential divider consists of two resistors, 6.0 kOhm and 2.0 kOhm, connected in series across a 12 V supply. Assume no load is connected across the output and the supply maintains the stated voltage.
Calculate the potential difference across the 2.0 kOhm resistor.
Question 16 [4 marks]
Forces and Motion
Two ice skaters, of mass 55 kg and 70 kg, are initially at rest and push off from each other. The 55 kg skater moves off at 3.2 m/s. Assume negligible horizontal external impulse during the push.
Calculate the velocity of the 70 kg skater immediately after they push apart, using conservation of momentum, and state the direction of this velocity relative to the first skater.
Question 17 [5 marks]
Materials
A spring extends by 0.20 m when a maximum force of 15 N is applied, obeying Hooke's law throughout.
Calculate the elastic potential energy stored using (a) the spring constant k, and (b) the area under the force-extension graph (0.5 x force x extension), and confirm that the two methods agree.
Question 18 [4 marks]
Electric Circuits
A battery of EMF 9.0 V and internal resistance 0.50 ohm is connected to an external resistor of resistance 4.0 ohm.
Calculate the current in the circuit and the terminal potential difference of the battery.
Question 19 [5 marks]
Materials
Two wires, P and Q, have the same length and cross-sectional area and are each stretched by the same tensile force. Wire P has a Young modulus of 2.0x10^11 Pa and wire Q has a Young modulus of 1.0x10^11 Pa. Assume the wire or wires remain in their linear elastic regions.
Calculate the ratio of the extension of wire Q to the extension of wire P, and explain your answer in terms of the stiffness of the two wires.
Question 20 [2 marks]
Wave Properties and Superposition
A stationary source emits sound of frequency 600 Hz. An observer moves directly towards the source at a speed of 15 m/s. The speed of sound in air is 340 m/s.
Calculate the frequency heard by the observer, using f' = f (v + vo)/v.
Question 21 [4 marks]
Work, Energy and Power
In a power station, fuel provides chemical energy at a rate of 500 MW. The boiler and turbine convert 40% of this into kinetic energy of the turbine, and the generator then converts 95% of that kinetic energy into electrical energy.
Calculate (a) the overall efficiency of the power station, and (b) the useful electrical power output.
Question 22 [4 marks]
Materials
A ductile material and a brittle material are each stretched to breaking point, and their stress-strain graphs are compared.
State and explain two typical differences between these graphs, considering the plastic region and the strain at fracture.
Question 23 [4 marks]
Atomic Structure and Particles
An alpha particle (charge +2e) with initial kinetic energy 6.4 MeV is fired directly at a stationary silver nucleus (charge +47e). Treat the silver nucleus as fixed, neglect its recoil, and take the initial electric potential energy to be zero at a large separation.
Calculate the distance of closest approach, in metres. Take the Coulomb constant k = 8.99x10^9 N m^2 C^-2, e = 1.60x10^-19 C, and 1 MeV = 1.60x10^-13 J.
Question 24 [5 marks]
Electric Circuits
In a circuit, a 12 V battery of negligible internal resistance is connected to a 10 ohm resistor in series with a parallel combination of a 20 ohm resistor and a 30 ohm resistor.
Calculate (a) the combined resistance of the parallel section, (b) the total current from the battery, and (c) the power dissipated in the 10 ohm resistor.
Question 25 [5 marks]
Wave Properties and Superposition
A wave source has a power output of 0.20 W and produces a wave of amplitude 3.0 mm at a certain point. The power output is then increased to 1.8 W, with the frequency, wave speed and distance from the source unchanged.
(a) State the relationship between the intensity of a wave and its amplitude.
(b) Calculate the factor by which the power (and hence intensity, for a fixed area) has increased.
(c) Hence calculate the new amplitude of the wave at the same point.
Question 26 [6 marks]
Electric Circuits
In an experiment, a battery is connected in turn to two different resistors. With a 4.0 ohm resistor connected, the current is 1.20 A. With an 8.0 ohm resistor connected, the current is 0.80 A. Assume the EMF and internal resistance remain constant between measurements.
Using EMF = I(R + r) for each case, calculate the EMF and the internal resistance of the battery.
Question 27 [6 marks]
Work, Energy and Power
A ball of mass 0.25 kg is thrown with a speed of 12 m/s from a point 1.5 m above the ground. Air resistance is negligible. Take g = 9.81 m/s^2.
Using conservation of energy, calculate the speed of the ball just before it hits the ground, and explain why the direction in which the ball is thrown does not affect this answer.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| in a transverse wave the oscillations are perpendicular to the direction of energy transfer, while in a longitudinal wave they are parallel to it | B1 |
| transverse waves can be polarised, but longitudinal waves cannot | B1 |
| Final answer: Transverse: oscillations perpendicular to propagation, can be polarised. Longitudinal: oscillations parallel to propagation, cannot be polarised | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| sin(r) = sin(40 degrees)/1.35, taking air index as 1 | M1 |
| r = 28.4 degrees; accept 28 degrees to 2 significant figures | A1 |
| Final answer: angle of refraction = 28.4 degrees | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| applying the given neutron composition to charge: q = (2/3 - 1/3 - 1/3)e | M1 |
| q = 0, showing electrical neutrality; no credit for merely copying uud or udd | A1 |
| Final answer: Proton = uud, neutron = udd, neutron charge = 0 | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| resistance = potential difference/current (R = V/I) | B1 |
| the unit is the ohm | B1 |
| Final answer: Resistance is the ratio of potential difference to current (R = V/I); its unit is the ohm | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| the plank's own weight acts at the pivot, so it provides no moment about the pivot | M1 |
| taking moments about the pivot: 250 x 1.2 = 300 x d | M1 |
| d = 1.0 m | A1 |
| Final answer: 1.0 m | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| work done = mgh = 250 x 9.81 x 8.0 | M1 |
| power = work done/time | M1 |
| power = 19620/5.0 = 3924 W (3.92 kW), accepting appropriate rounding | A1 |
| Final answer: 3920 W (3.92 kW) | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| using E = hf | M1 |
| E = 6.63x10^-34 x 6.0x10^14 = 3.98x10^-19 J | A1 |
| converting to eV using E(eV) = E(J)/e | M1 |
| E = 3.98x10^-19/1.60x10^-19 = 2.49 eV | A1 |
| Final answer: E = 3.98 x 10^-19 J = 2.49 eV | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| using force = stress x area | M1 |
| force = 1.8x10^8 x 3.0x10^-7 = 54 N | A1 |
| using extension = strain x original length | M1 |
| extension = 0.0020 x 1.5 = 3.0x10^-3 m | A1 |
| Final answer: force = 54 N, extension = 3.0 x 10^-3 m (3.0 mm) | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| total final strangeness = 0 + 0 = 0, differing from the initial +1 (change -1) | B1 |
| this strangeness change excludes the strong interaction, which conserves strangeness | B1 |
| identifying the weak interaction, which can change strangeness | B1 |
| Final answer: Strangeness changes from +1 to 0, so strangeness is not conserved; the decay must proceed via the weak interaction | |
| Question 10[3 marks] | |
|---|---|
| Answer or working | Marks |
| rearranging I = nAvq to v = I/(nAq), using the charge magnitude | M1 |
| v = 3.0/(8.5x10^28 x 2.0x10^-6 x 1.60x10^-19) = 1.10x10^-4 m/s | A1 |
| electrons drift opposite to conventional current | B1 |
| Final answer: Mean drift speed = 1.10x10^-4 m/s, opposite to conventional current | |
| Question 11[3 marks] | |
|---|---|
| Answer or working | Marks |
| constructive interference occurs where the path difference is a whole number of wavelengths | B1 |
| order n = path difference/wavelength | M1 |
| n = 2.04/0.68 = 3 | A1 |
| Final answer: n = 3 (third order); constructive interference occurs where the path difference is a whole number of wavelengths | |
| Question 12[3 marks] | |
|---|---|
| Answer or working | Marks |
| equating mgh = 0.5 m v^2 and cancelling mass | M1 |
| rearranging to v = sqrt(2gh) | M1 |
| v = sqrt(2 x 9.81 x 0.15) = 1.715517415 m/s, about 1.72 m/s | A1 |
| Final answer: v = 1.72 m/s | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| using current = power/voltage | M1 |
| current = 3000/240 | M1 |
| current = 12.5 A | A1 |
| the 13 A fuse should be used, because it is the smallest of the given ratings that is still greater than the normal operating current | B1 |
| Final answer: current = 12.5 A; use the 13 A fuse, since it is the smallest rating that exceeds the normal operating current | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| path difference = 3.40 - 2.55 = 0.85 m | M1 |
| 0.85 = 2.5 x wavelength | M1 |
| wavelength = 0.34 m | A1 |
| frequency = 340/0.34 = 1000 Hz | A1 |
| Final answer: wavelength = 0.34 m, frequency = 1000 Hz | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| using the potential divider formula Vout = Vin x R2/(R1 + R2) | M1 |
| total resistance R1 + R2 = 6.0 + 2.0 = 8.0 kOhm | M1 |
| Vout = 12 x (2.0/8.0) | M1 |
| Vout = 3.0 V | A1 |
| Final answer: 3.0 V | |
| Question 16[4 marks] | |
|---|---|
| Answer or working | Marks |
| 0 = 55 x 3.2 + 70v, taking first skater motion as positive | M1 |
| v = -(55 x 3.2)/70 | M1 |
| speed = 2.51 m s^-1; accept 2.5 m s^-1 | A1 |
| opposite direction to the 55 kg skater (negative velocity in the chosen convention) | B1 |
| Final answer: 2.51 m/s, in the opposite direction to the 55 kg skater | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| using k = force/extension = 15/0.20 = 75 N/m | M1 |
| using EPE = 0.5 k x^2 | M1 |
| EPE = 0.5 x 75 x 0.20^2 = 1.5 J | A1 |
| using EPE = 0.5 x force x extension | M1 |
| EPE = 0.5 x 15 x 0.20 = 1.5 J, confirming the two methods agree | A1 |
| Final answer: EPE = 1.5 J by both methods | |
| Question 18[4 marks] | |
|---|---|
| Answer or working | Marks |
| using current = EMF/(R + r) | M1 |
| current = 9.0/(4.0 + 0.50) = 2.0 A | A1 |
| terminal pd = EMF - (current x internal resistance) | M1 |
| terminal pd = 9.0 - (2.0 x 0.50) = 8.0 V | A1 |
| Final answer: current = 2.0 A, terminal pd = 8.0 V | |
| Question 19[5 marks] | |
|---|---|
| Answer or working | Marks |
| the stress is the same in both wires, since they have the same applied force and cross-sectional area | M1 |
| strain = stress/Young modulus, so for fixed length the extension is proportional to 1/Young modulus | M1 |
| ratio of extensions = Young modulus of P/Young modulus of Q | M1 |
| ratio = 2.0x10^11/1.0x10^11 = 2 | A1 |
| wire Q, having the lower Young modulus (less stiff), extends twice as much as wire P | B1 |
| Final answer: extension of Q is twice the extension of P, because Q has half the Young modulus and so is less stiff | |
| Question 20[2 marks] | |
|---|---|
| Answer or working | Marks |
| f' = 600 x (340 + 15)/340 | M1 |
| f' = 626 Hz; accept 6.3x10^2 Hz to 2 significant figures | A1 |
| Final answer: Observed frequency = 600 x (340 + 15)/340 = 626 Hz (about 6.3 x 10^2 Hz to 2 significant figures). | |
| Question 21[4 marks] | |
|---|---|
| Answer or working | Marks |
| using overall efficiency = product of the efficiencies of each stage | M1 |
| overall efficiency = 0.38 (38%) | A1 |
| using output power = input power x overall efficiency | M1 |
| output power = 190 MW | A1 |
| Final answer: overall efficiency = 38%, electrical power output = 190 MW | |
| Question 22[4 marks] | |
|---|---|
| Answer or working | Marks |
| the ductile material has a substantial plastic region, unlike the brittle material which has little or none | B1 |
| plastic deformation means strain remains after unloading; equivalent correct explanation accepted | B1 |
| the ductile material typically reaches a greater strain before fracture than the brittle material | B1 |
| this means it undergoes a greater fractional extension before breaking; equivalent correct explanation accepted | B1 |
| Final answer: A ductile material typically has a substantial plastic region with permanent strain; a brittle material has little or none. The ductile material typically reaches a larger fracture strain, so it undergoes more fractional extension before breaking. | |
| Question 23[4 marks] | |
|---|---|
| Answer or working | Marks |
| equating the initial kinetic energy to the electric potential energy at closest approach, KE = k q1 q2/r, rearranged to r = k q1 q2/KE | M1 |
| q1 = 2e = 3.20x10^-19 C and q2 = 47e = 7.52x10^-18 C | M1 |
| KE = 6.4 x 1.60x10^-13 = 1.024x10^-12 J | M1 |
| r = 2.11x10^-14 m | A1 |
| Final answer: 2.11 x 10^-14 m | |
| Question 24[5 marks] | |
|---|---|
| Answer or working | Marks |
| using 1/Rp = 1/20 + 1/30 | M1 |
| Rp = 12 ohm | A1 |
| total resistance = 10 + 12 = 22 ohm, and current = pd/total resistance | M1 |
| current = 12/22 = 0.545 A | A1 |
| power in the 10 ohm resistor = current^2 x resistance = 0.545^2 x 10 = 2.98 W | A1 |
| Final answer: Rp = 12 ohm, current = 0.545 A, power in the 10 ohm resistor = 2.98 W | |
| Question 25[5 marks] | |
|---|---|
| Answer or working | Marks |
| intensity (and power, for a fixed area) is proportional to the square of the amplitude | B1 |
| power factor = 1.8/0.20 | M1 |
| power factor = 9 | A1 |
| amplitude ratio = sqrt(intensity ratio) = sqrt(9) = 3 | M1 |
| new amplitude = 3.0 x 3 = 9.0 mm | A1 |
| Final answer: Intensity is proportional to amplitude squared; power increases by a factor of 9, so amplitude increases by a factor of 3, giving a new amplitude of 9.0 mm | |
| Question 26[6 marks] | |
|---|---|
| Answer or working | Marks |
| using EMF = I(R + r) for both cases | M1 |
| EMF = 1.20(4.0 + r) = 4.8 + 1.20r, and EMF = 0.80(8.0 + r) = 6.4 + 0.80r | M1 |
| setting the two expressions equal: 4.8 + 1.20r = 6.4 + 0.80r | M1 |
| solving the simultaneous equations by elimination: 0.40r = 1.6 | M1 |
| EMF = 4.8 + (1.20 x 4.0) = 9.6 V | A1 |
| internal resistance r = 4.0 ohm | A1 |
| Final answer: EMF = 9.6 V, internal resistance = 4.0 ohm | |
| Question 27[6 marks] | |
|---|---|
| Answer or working | Marks |
| using conservation of energy: 0.5 m v0^2 + mgh = 0.5 m v^2, taking the ground as the reference level for GPE | M1 |
| the mass m cancels from every term | M1 |
| v^2 = v0^2 + 2gh | M1 |
| v^2 = 12^2 + (2 x 9.81 x 1.5) = 173 | M1 |
| v = 13.2 m/s | A1 |
| the direction thrown does not affect the answer because energy is a scalar quantity, so only the initial speed and the height dropped affect the final speed | B1 |
| Final answer: v = 13.2 m/s; the direction thrown does not matter because energy is a scalar, so only the initial speed and height dropped affect the final speed | |