A Level Physics Paper 2
Covers Atomic Structure and Particles, Particle Interactions and the Standard Model, Nuclear Physics and 9 more.
Questions
Question 1 [2 marks]
Refraction, Diffraction and Interference
Total internal reflection can occur at a boundary between two transparent media.
State the two conditions that must both be met for total internal reflection to occur at such a boundary.
Question 2 [2 marks]
Circular Motion and Simple Harmonic Motion
An object oscillates about a fixed equilibrium position.
State the definition of simple harmonic motion, in terms of acceleration and displacement.
Question 3 [3 marks]
Nuclear Physics
The activity of a radioactive source falls to 1/16 of its initial value after a certain time.
State the number of half-lives that have elapsed, and calculate the time elapsed if the half-life of the source is 15 minutes.
Question 4 [3 marks]
Particle Interactions and the Standard Model
A pi+ meson is made from an up quark and a down-antiquark.
Given the quark charges up = +2/3 e and down-antiquark = +1/3 e, calculate the total charge of the pi+ meson, and state its baryon number.
Question 5 [4 marks]
Electric Circuits
A resistor of resistance 15 ohm has a current of 2.4 A flowing through it.
Calculate (a) the potential difference across the resistor, and (b) the power dissipated in it.
Question 6 [2 marks]
Wave Properties and Superposition
Unpolarised light of intensity I0 passes through a polarising filter, which transmits half of the incident intensity, and then through a second polarising filter whose transmission axis is at 60 degrees to that of the first.
Using Malus's law, I = I1 cos^2(theta), calculate the intensity transmitted through the second filter as a fraction of I0.
Question 7 [3 marks]
Atomic Structure and Particles
In the alpha particle scattering experiment, a beam of alpha particles is directed at a thin gold foil.
Explain why the results of this experiment provide evidence that the nucleus of an atom is small, dense and positively charged.
Question 8 [4 marks]
Wave Properties and Superposition
Unpolarised light passes through a single polarising filter, which transmits half of the incident intensity, and then through a second polarising filter. The intensity emerging from the second filter is 0.30 of the original (unpolarised) intensity.
Using Malus's law, I = I1 cos^2(theta), calculate the angle between the transmission axes of the two filters.
Question 9 [4 marks]
Forces and Motion
A block of mass 6.0 kg on a smooth (frictionless) horizontal surface is pulled by a rope that makes an angle of 25 degrees with the horizontal. The tension in the rope is 40 N.
Calculate (a) the horizontal component of the tension, and (b) the resulting horizontal acceleration of the block.
Question 10 [4 marks]
Fields
A proton (charge +1.60x10^-19 C) moves at a speed of 2.5x10^6 m/s at right angles to a uniform magnetic field of flux density 0.40 T.
Calculate the magnitude of the magnetic force on the proton, using F = qvB, and state its direction relative to the velocity and the field.
Question 11 [5 marks]
Materials
Two wires, R and S, are made from the same material and have the same natural length. Wire R has twice the cross-sectional area of wire S. The same tensile force is applied to each wire. Assume the wire or wires remain in their linear elastic regions.
Calculate the ratio of the extension of wire S to the extension of wire R, and explain your answer in terms of stress.
Question 12 [4 marks]
Thermal Physics and Ideal Gases
A cylinder of volume 0.0200 m^3 contains an ideal gas at a pressure of 1.5x10^5 Pa and a temperature of 300 K. The gas has a molar mass of 32 g/mol (oxygen). Take R = 8.31 J/(mol K).
Calculate (a) the number of moles of gas present, and (b) the density of the gas in the cylinder.
Question 13 [4 marks]
Materials
A ductile material and a brittle material are each stretched to breaking point, and their stress-strain graphs are compared.
State and explain two typical differences between these graphs, considering the plastic region and the strain at fracture.
Question 14 [5 marks]
Work, Energy and Power
A skier of mass 65 kg starts from rest at the top of a slope of vertical height 30 m. At the bottom of the slope her speed is 20 m/s.
Taking g = 9.81 m/s^2, calculate (a) the loss in gravitational potential energy over the descent, and (b) the energy dissipated by friction and air resistance.
Question 15 [5 marks]
Refraction, Diffraction and Interference
A ray of light is incident on a rectangular glass block of refractive index 1.50 at an angle of incidence of 50 degrees to the normal, at the first (upper) surface.
(a) Calculate the angle of refraction of the ray inside the glass at the first surface, using Snell's law. (b) The ray then reaches the second (lower) surface, which is parallel to the first. State the angle of incidence at this second surface, and calculate the angle at which the ray emerges from the glass block back into air. (c) State how the direction of the emergent ray compares with the direction of the original incident ray.
Question 16 [6 marks]
Thermal Physics and Ideal Gases
A 0.30 kg block of ice at 0 degC is heated until it becomes water at 0 degC, and this water is then further heated to 45 degC. Take the specific latent heat of fusion of ice as 3.34x10^5 J/kg and the specific heat capacity of water as 4200 J/(kg degC).
Calculate (a) the energy needed to melt the ice, (b) the energy needed to then heat the water from 0 degC to 45 degC, and (c) the total energy required for the whole process.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| light must be travelling from an optically denser medium into a less dense medium (from a higher to a lower refractive index) | B1 |
| the angle of incidence at the boundary must be greater than the critical angle | B1 |
| Final answer: Light travels from a denser to a less dense medium, and the angle of incidence exceeds the critical angle | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| the acceleration is directly proportional to the displacement from the equilibrium position | B1 |
| the acceleration is always directed towards the equilibrium position (opposite in direction to the displacement) | B1 |
| Final answer: Acceleration is proportional to displacement from a fixed point and is always directed towards that point (opposite to displacement) | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| 1/16 = (1/2)^4, so 4 half-lives have elapsed | B1 |
| time elapsed = number of half-lives x half-life | M1 |
| time elapsed = 4 x 15 = 60 minutes | A1 |
| Final answer: 4 half-lives, 60 minutes | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| total charge = (2/3 + 1/3)e | M1 |
| total charge = +1e | A1 |
| baryon number = 0, since mesons are not baryons | B1 |
| Final answer: charge = +1e, baryon number = 0 | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| using V = IR | M1 |
| V = 2.4 x 15 = 36 V | A1 |
| using P = VI (or I^2 R) | M1 |
| P = 36 x 2.4 = 86.4 W | A1 |
| Final answer: V = 36 V, P = 86.4 W | |
| Question 6[2 marks] | |
|---|---|
| Answer or working | Marks |
| evaluating cos^2(60 degrees) = 0.25 | M1 |
| transmitted fraction = (1/2) x 0.25 = 0.125 = 1/8 of I0; credit the fraction once | A1 |
| Final answer: Transmitted intensity = 0.125 I0 (one eighth of the original intensity) | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| most alpha particles pass straight through or are only slightly deflected, showing the atom is mostly empty space | B1 |
| a small number are deflected through large angles, some almost back the way they came, showing that most of the mass is concentrated in a very small volume | B1 |
| the deflection is caused by electrostatic repulsion between the positive alpha particles and the nucleus, showing the nucleus is positively charged | B1 |
| Final answer: Most alpha particles pass through undeflected, showing the atom is mostly empty space; a few deflect through large angles, showing a small, dense, positively charged nucleus | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| using Malus's law, cos^2(theta) = I(second)/I1 = 0.30 I0/(0.5 I0) | M1 |
| cos^2(theta) = 0.60 | A1 |
| theta = arccos(sqrt(0.60)) | M1 |
| theta = 39.2 degrees | A1 |
| Final answer: 39.2 degrees | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| horizontal tension = 40 cos(25 degrees) | M1 |
| horizontal component = 36.3 N; accept 36 N | A1 |
| a = horizontal resultant force/mass | M1 |
| a = 6.04 m s^-2; accept 6.0 m s^-2 | A1 |
| Final answer: horizontal component = 36.3 N, acceleration = 6.04 m/s^2 | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| using F = qvB | M1 |
| F = 1.60x10^-19 x 2.5x10^6 x 0.40 | M1 |
| F = 1.6x10^-13 N | A1 |
| the force acts at right angles to both the velocity and the magnetic field | B1 |
| Final answer: 1.6 x 10^-13 N, acting at right angles to both the velocity and the field | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| the same material means both wires have the same Young modulus | M1 |
| stress = force/area, so for the same force, stress is inversely proportional to area | M1 |
| the stress in S is twice the stress in R, since S has half the area of R | A1 |
| strain = stress/Young modulus, and extension = strain x length, so for the same length extension is proportional to stress | M1 |
| the extension of S is twice the extension of R | A1 |
| Final answer: extension of S : extension of R = 2 : 1 (S extends twice as much as R), because S has half the cross-sectional area and so twice the stress for the same force | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| using n = pV/RT | M1 |
| n = (1.5x10^5 x 0.0200)/(8.31 x 300) | M1 |
| n = 1.20 mol, so mass = n x molar mass = 1.20 x 32 = 38.5 g (0.0385 kg) | A1 |
| density = mass/volume = 0.0385/0.0200 = 1.93 kg/m^3 | A1 |
| Final answer: n = 1.20 mol, density = 1.93 kg/m^3 | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| the ductile material has a substantial plastic region, unlike the brittle material which has little or none | B1 |
| plastic deformation means strain remains after unloading; equivalent correct explanation accepted | B1 |
| the ductile material typically reaches a greater strain before fracture than the brittle material | B1 |
| this means it undergoes a greater fractional extension before breaking; equivalent correct explanation accepted | B1 |
| Final answer: A ductile material typically has a substantial plastic region with permanent strain; a brittle material has little or none. The ductile material typically reaches a larger fracture strain, so it undergoes more fractional extension before breaking. | |
| Question 14[5 marks] | |
|---|---|
| Answer or working | Marks |
| loss in GPE = mgh = 65 x 9.81 x 30 | M1 |
| loss in GPE = 1.91x10^4 J (19100 J) | A1 |
| kinetic energy gained = 0.5 m v^2 = 0.5 x 65 x 20^2 = 1.30x10^4 J | M1 |
| energy dissipated = loss in GPE - kinetic energy gained | M1 |
| energy dissipated = 6130 J | A1 |
| Final answer: GPE loss = 19100 J, energy dissipated = 6130 J | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| using n1 sin(theta1) = n2 sin(theta2) at the first surface, sin(r) = sin(50)/1.50 | M1 |
| angle of refraction inside the glass = 30.7 degrees | A1 |
| the angle of incidence at the second (parallel) surface equals the angle of refraction at the first surface (30.7 degrees), since the two surfaces are parallel | B1 |
| using Snell's law at the second surface, sin(exit) = 1.50 x sin(30.7) | M1 |
| the ray emerges at 50 degrees to the normal, travelling parallel to the original incident ray | A1 |
| Final answer: First refraction angle = 30.7 degrees. Incidence at the second parallel surface = 30.7 degrees. Emergence angle = 50 degrees to the normal; the emergent ray is parallel to the original incident ray. | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific latent heat of fusion | M1 |
| energy to melt the ice = 0.30 x 3.34x10^5 = 1.00x10^5 J | A1 |
| using energy = mass x specific heat capacity x temperature change | M1 |
| energy to heat the water = 0.30 x 4200 x 45 = 5.67x10^4 J | A1 |
| total energy = 1.00x10^5 + 5.67x10^4 | M1 |
| total energy = 1.57x10^5 J | A1 |
| Final answer: energy to melt the ice = 1.00 x 10^5 J, energy to heat the water to 45 degC = 5.67 x 10^4 J, total energy = 1.57 x 10^5 J | |