A Level Physics Paper 4
Covers Atomic Structure and Particles, Particle Interactions and the Standard Model, Nuclear Physics and 9 more.
Questions
Question 1 [2 marks]
Refraction, Diffraction and Interference
A medium has a refractive index of 1.60 relative to air.
Calculate the critical angle for the boundary between this medium and air, using sin C = 1/n.
Question 2 [2 marks]
Nuclear Physics
Activity is used to describe the rate of radioactive decay of a sample.
Define activity, and state its SI unit.
Question 3 [2 marks]
Forces and Motion
A cyclist travelling at 12 m/s applies the brakes and decelerates uniformly at 2.0 m/s^2.
Calculate the distance the cyclist travels before coming to rest, using v^2 = u^2 + 2as.
Question 4 [2 marks]
Fields
The electrostatic force between two point charges depends on their charge and their separation.
State Coulomb's law in words.
Question 5 [3 marks]
Circular Motion and Simple Harmonic Motion
A ball of mass 0.20 kg moves in a horizontal circle of radius 0.35 m, completing one revolution every 0.90 s.
Calculate the centripetal force on the ball, using F = 4 pi^2 m r/T^2.
Question 6 [3 marks]
Electric Circuits
A current of 3.0 A flows through a resistor of resistance 8.0 ohm.
Calculate the power dissipated in the resistor, using P = I^2 R.
Question 7 [2 marks]
Wave Properties and Superposition
Unpolarised light of intensity I0 passes through a polarising filter, which transmits half of the incident intensity, and then through a second polarising filter whose transmission axis is at 60 degrees to that of the first.
Using Malus's law, I = I1 cos^2(theta), calculate the intensity transmitted through the second filter as a fraction of I0.
Question 8 [2 marks]
Fields
A straight wire of length 0.45 m carries a current of 3.2 A and is placed at right angles to a uniform magnetic field of flux density 0.085 T.
Calculate the force on the wire.
Question 9 [3 marks]
Work, Energy and Power
A pendulum bob of mass 0.20 kg is released from rest at a height of 0.15 m above its lowest point. Air resistance is negligible.
Calculate the speed of the bob as it passes through the lowest point of its swing, using conservation of energy (loss of gravitational PE = gain in KE). Take g = 9.81 m/s^2.
Question 10 [4 marks]
Atomic Structure and Particles
An alpha particle (charge +2e) is fired directly at a stationary gold nucleus (charge +79e) and comes to rest, momentarily, at a distance of closest approach of 3.0x10^-14 m from the centre of the nucleus. Treat the gold nucleus as fixed, neglect its recoil, and take the initial electric potential energy to be zero at a large separation.
Calculate the initial kinetic energy of the alpha particle, in MeV. Take the Coulomb constant k = 8.99x10^9 N m^2 C^-2, e = 1.60x10^-19 C, and 1 MeV = 1.60x10^-13 J.
Question 11 [4 marks]
Particle Interactions and the Standard Model
A proposed particle decay is: proton -> positron + pi0.
Using conservation of baryon number and conservation of charge, discuss whether this decay is possible.
Question 12 [5 marks]
Materials
Two wires, R and S, are made from the same material and have the same natural length. Wire R has twice the cross-sectional area of wire S. The same tensile force is applied to each wire. Assume the wire or wires remain in their linear elastic regions.
Calculate the ratio of the extension of wire S to the extension of wire R, and explain your answer in terms of stress.
Question 13 [5 marks]
Thermal Physics and Ideal Gases
Calculate (a) the average (mean) kinetic energy of a single gas molecule at a temperature of 350 K, using KE = 1.5 k T, and (b) the temperature at which a gas molecule would have double this kinetic energy.
Take the Boltzmann constant k = 1.38x10^-23 J/K.
Question 14 [3 marks]
Particle Interactions and the Standard Model
In muon decay, a negative muon decays as: mu- -> e- + antineutrino + neutrino. The muon and the electron are each leptons of lepton number +1, and of the two neutral products one is an antineutrino (lepton number -1) and the other is a neutrino (lepton number +1).
State the charge and the lepton number of each side of this equation, and use these to show that both charge and lepton number are conserved in this decay.
Question 15 [6 marks]
Nuclear Physics
In a fusion reaction, two deuterium nuclei, each of mass 3.344x10^-27 kg, fuse to form a helium-3 nucleus of mass 5.008x10^-27 kg and a neutron of mass 1.675x10^-27 kg.
Calculate (a) the mass defect of this reaction, and (b) the energy released, in joules and in MeV. Take c = 3.00x10^8 m/s and 1 MeV = 1.60x10^-13 J.
Question 16 [6 marks]
Fields
A satellite moves in a circular orbit around the Earth at a radius of 4.2x10^7 m, where the gravitational field strength is 0.224 N/kg.
Calculate (a) the orbital speed of the satellite, using the fact that gravity provides the centripetal force, and (b) the orbital period of the satellite, in hours, using T = 2 pi r/v.
Question 17 [6 marks]
Forces and Motion
Two blocks, A (mass 3.0 kg) and B (mass 5.0 kg), are connected by a light inextensible string and rest in a line on a rough horizontal surface, with B in front of A. A horizontal force of 40 N is applied to block B, pulling both blocks. The coefficient of friction between each block and the surface is 0.20. Take g = 9.81 m/s^2. Take the stated coefficient of friction to apply both at limiting static friction and while sliding.
Calculate (a) the total frictional force acting on the two blocks, (b) the acceleration of the blocks, and (c) the tension in the string, by considering block A alone.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| C = arcsin(1/1.60) | M1 |
| C = 38.7 degrees | A1 |
| Final answer: 38.7 degrees | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| activity is the number of nuclei that decay (disintegrate) per unit time | B1 |
| the unit is the becquerel (Bq) | B1 |
| Final answer: Activity is the number of decays per unit time; its unit is the becquerel (Bq) | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| 0 = 12^2 + 2(-2.0)s, or s = 12^2/(2 x 2.0) using the deceleration magnitude | M1 |
| s = 36 m | A1 |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| the force between two point charges is proportional to the product of the charges | B1 |
| and is inversely proportional to the square of the distance between them | B1 |
| Final answer: The force between two point charges is proportional to the product of the charges and inversely proportional to the square of their separation | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| using F = 4 pi^2 m r/T^2 | M1 |
| F = (4 x pi^2 x 0.20 x 0.35)/0.90^2 | M1 |
| F = 3.41 N | A1 |
| Final answer: 3.41 N | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| using P = I^2 R | M1 |
| P = 3.0^2 x 8.0 | M1 |
| P = 72 W | A1 |
| Final answer: 72 W | |
| Question 7[2 marks] | |
|---|---|
| Answer or working | Marks |
| evaluating cos^2(60 degrees) = 0.25 | M1 |
| transmitted fraction = (1/2) x 0.25 = 0.125 = 1/8 of I0; credit the fraction once | A1 |
| Final answer: Transmitted intensity = 0.125 I0 (one eighth of the original intensity) | |
| Question 8[2 marks] | |
|---|---|
| Answer or working | Marks |
| using force = magnetic flux density x current x length | M1 |
| force = 0.122 N | A1 |
| Final answer: 0.122 N | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| equating mgh = 0.5 m v^2 and cancelling mass | M1 |
| rearranging to v = sqrt(2gh) | M1 |
| v = sqrt(2 x 9.81 x 0.15) = 1.715517415 m/s, about 1.72 m/s | A1 |
| Final answer: v = 1.72 m/s | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| equating the initial kinetic energy to the electric potential energy at closest approach, KE = k q1 q2 / r | M1 |
| q1 = 2e = 3.20x10^-19 C and q2 = 79e = 1.264x10^-17 C | M1 |
| KE = (8.99x10^9 x 3.20x10^-19 x 1.264x10^-17)/(3.0x10^-14) = 1.21x10^-12 J | M1 |
| KE = 1.21x10^-12/1.60x10^-13 = 7.6 MeV | A1 |
| Final answer: 7.6 MeV | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| the baryon number of the proton before the decay is +1 | B1 |
| the baryon number after the decay is 0, since both the positron and the pi0 are non-baryons | B1 |
| baryon number is not conserved, so the decay is not allowed | B1 |
| charge is conserved (+1 before = +1 after), but this alone is not sufficient, since every conservation law must hold | B1 |
| Final answer: Not allowed - baryon number is not conserved (1 before, 0 after), even though charge is conserved | |
| Question 12[5 marks] | |
|---|---|
| Answer or working | Marks |
| the same material means both wires have the same Young modulus | M1 |
| stress = force/area, so for the same force, stress is inversely proportional to area | M1 |
| the stress in S is twice the stress in R, since S has half the area of R | A1 |
| strain = stress/Young modulus, and extension = strain x length, so for the same length extension is proportional to stress | M1 |
| the extension of S is twice the extension of R | A1 |
| Final answer: extension of S : extension of R = 2 : 1 (S extends twice as much as R), because S has half the cross-sectional area and so twice the stress for the same force | |
| Question 13[5 marks] | |
|---|---|
| Answer or working | Marks |
| using KE = 1.5 k T | M1 |
| KE = 1.5 x 1.38x10^-23 x 350 | M1 |
| KE = 7.25x10^-21 J | A1 |
| KE is directly proportional to absolute temperature T | B1 |
| doubling KE requires doubling T, so T = 700 K | A1 |
| Final answer: KE = 7.25 x 10^-21 J; T = 700 K for double this KE | |
| Question 14[3 marks] | |
|---|---|
| Answer or working | Marks |
| initial muon charge = -e | B1 |
| final charge = -e + 0 + 0 = -e, equal to the initial charge, so charge is conserved | B1 |
| final lepton number = +1 - 1 + 1 = +1, equal to the given initial +1, so lepton number is conserved | B1 |
| Final answer: Both sides have charge -1 and lepton number +1, so charge and lepton number are both conserved | |
| Question 15[6 marks] | |
|---|---|
| Answer or working | Marks |
| total mass before = 2 x 3.344x10^-27 = 6.688x10^-27 kg | M1 |
| total mass after = 5.008x10^-27 + 1.675x10^-27 = 6.683x10^-27 kg | M1 |
| mass defect = 5.0x10^-30 kg | A1 |
| energy released = mass defect x c^2 | M1 |
| energy = 5.0x10^-30 x (3.00x10^8)^2 = 4.5x10^-13 J | A1 |
| energy = 4.5x10^-13/1.60x10^-13 = 2.81 MeV | A1 |
| Final answer: mass defect = 5.0 x 10^-30 kg, energy released = 4.5 x 10^-13 J (2.81 MeV) | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| equating the gravitational force to the centripetal force: mg = mv^2/r, so v = sqrt(g r) | M1 |
| v = sqrt(0.224 x 4.2x10^7) | M1 |
| v = 3.07x10^3 m/s | A1 |
| using T = 2 pi r/v | M1 |
| T = (2 x pi x 4.2x10^7)/3.07x10^3 | M1 |
| T = 8.60x10^4 s (23.9 hours) | A1 |
| Final answer: orbital speed = 3.07 x 10^3 m/s, orbital period = 8.60 x 10^4 s (23.9 hours) | |
| Question 17[6 marks] | |
|---|---|
| Answer or working | Marks |
| total friction = coefficient x (mass of A + mass of B) x g | M1 |
| total friction = 0.20 x 8.0 x 9.81 = 15.7 N | A1 |
| using Newton's second law for the whole system: a = (applied force - total friction)/total mass | M1 |
| a = (40 - 15.7)/8.0 = 3.04 m/s^2 | A1 |
| block A alone: T - friction on A = mass of A x a, with friction on A = 0.20 x 3.0 x 9.81 = 5.89 N | M1 |
| T = (3.0 x 3.04) + 5.89 = 15.0 N | A1 |
| Final answer: total friction = 15.7 N, acceleration = 3.04 m/s^2, tension = 15.0 N | |