A Level Physics Short Paper B
Covers Work, Energy and Power, Materials, Electric Circuits and 3 more.
Questions
Question 1 [2 marks]
Circular Motion and Simple Harmonic Motion
An object oscillates about a fixed equilibrium position.
State the definition of simple harmonic motion, in terms of acceleration and displacement.
Question 2 [4 marks]
Work, Energy and Power
A weightlifter raises a barbell of mass 120 kg through a height of 2.0 m in a time of 0.80 s. Take g = 9.81 m/s^2.
Calculate the average useful power transferred to the gravitational potential energy of the barbell-Earth system.
Question 3 [4 marks]
Thermal Physics and Ideal Gases
A 0.20 kg block of metal at 100 degC is placed into 0.50 kg of water at 15 degC in an insulated container. The final temperature of the water and metal is 20 degC. The specific heat capacity of water is 4200 J/(kg degC). The container has negligible heat capacity.
Calculate the specific heat capacity of the metal, assuming no heat is lost to the surroundings.
Question 4 [3 marks]
Materials
A metal wire is stretched using an increasing force until it is deformed beyond its elastic limit, and the load is then removed.
Explain what happens to the length of the wire, and what is meant by the term 'plastic deformation'.
Question 5 [3 marks]
Electric Circuits
A copper wire of cross-sectional area 2.0x10^-6 m^2 carries a current of 3.0 A. The number density of free electrons in copper is 8.5x10^28 per m^3 and the magnitude of the electron charge is 1.60x10^-19 C.
Calculate the mean drift speed of the electrons, using I = nAvq, and state their direction relative to conventional current.
Question 6 [3 marks]
Thermal Physics and Ideal Gases
A quantity of 0.20 kg of water at 100 degC is converted into steam at 100 degC.
Calculate the energy required, taking the specific latent heat of vaporisation of water as 2.26x10^6 J/kg.
Question 7 [4 marks]
Circular Motion and Simple Harmonic Motion
A mass on a spring oscillates with simple harmonic motion of amplitude 0.060 m and period 0.80 s.
Calculate the maximum speed and the maximum acceleration of the mass.
Question 8 [5 marks]
Fields
A satellite of mass 500 kg orbits the Earth at a height where the gravitational field strength is 8.1 N/kg, in a circular orbit of radius 7.0x10^6 m.
Calculate (a) the gravitational force on the satellite, and (b) the orbital speed of the satellite, using the fact that this gravitational force provides the centripetal force, F = mv^2/r.
Question 9 [6 marks]
Materials
A lift cable must be able to support a maximum load of 12000 N with a safety factor of 5, meaning the maximum stress in normal use must be no more than 1/5 of the material's breaking stress. The breaking stress of the cable material is 4.0x10^8 Pa.
Calculate (a) the minimum cross-sectional area the cable must have, and (b) explain why a safety factor is used in engineering design.
Question 10 [6 marks]
Fields
A coil of 250 turns and cross-sectional area 4.0x10^-3 m^2 is placed with its plane perpendicular to a uniform magnetic field. The magnetic flux density is increased uniformly from 0.020 T to 0.068 T in 0.40 s.
Calculate (a) the change in magnetic flux linkage of the coil, and (b) the magnitude of the average EMF induced in the coil, using Faraday's law.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| the acceleration is directly proportional to the displacement from the equilibrium position | B1 |
| the acceleration is always directed towards the equilibrium position (opposite in direction to the displacement) | B1 |
| Final answer: Acceleration is proportional to displacement from a fixed point and is always directed towards that point (opposite to displacement) | |
| Question 2[4 marks] | |
|---|---|
| Answer or working | Marks |
| using work done = mgh | M1 |
| work done = 120 x 9.81 x 2.0 = 2350 J | A1 |
| using power = work done/time | M1 |
| power = 2350/0.80 = 2940 W | A1 |
| Final answer: 2940 W (2.94 kW) | |
| Question 3[4 marks] | |
|---|---|
| Answer or working | Marks |
| using energy gained by the water = mass x specific heat capacity x temperature change | M1 |
| energy gained by the water = 0.50 x 4200 x 5 = 10500 J | A1 |
| using energy lost by the metal = energy gained by the water, so c(metal) = energy/(mass x temperature change of the metal) | M1 |
| c(metal) = 10500/(0.20 x 80) = 656 J/(kg degC) | A1 |
| Final answer: c(metal) = 656 J/(kg degC) | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| the wire contracts on unloading as the recoverable elastic extension is removed | B1 |
| a residual extension remains, so the wire is longer than its original length | B1 |
| plastic deformation is permanent deformation remaining after the force is removed | B1 |
| Final answer: On unloading the wire contracts elastically but retains a permanent extension. Plastic deformation is a permanent change of shape or length after unloading. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| rearranging I = nAvq to v = I/(nAq), using the charge magnitude | M1 |
| v = 3.0/(8.5x10^28 x 2.0x10^-6 x 1.60x10^-19) = 1.10x10^-4 m/s | A1 |
| electrons drift opposite to conventional current | B1 |
| Final answer: Mean drift speed = 1.10x10^-4 m/s, opposite to conventional current | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| using energy = mass x specific latent heat of vaporisation | M1 |
| energy = 0.20 x 2.26x10^6 | M1 |
| energy = 4.52x10^5 J | A1 |
| Final answer: 4.52 x 10^5 J | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| angular frequency = 2 pi/T = 2 pi/0.80 = 7.85 rad/s | M1 |
| using maximum speed = angular frequency x amplitude | M1 |
| maximum speed = 7.85 x 0.060 = 0.471 m/s | A1 |
| maximum acceleration = angular frequency^2 x amplitude = 7.85^2 x 0.060 = 3.70 m/s^2 | A1 |
| Final answer: maximum speed = 0.471 m/s, maximum acceleration = 3.70 m/s^2 | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| using force = mass x field strength | M1 |
| force = 500 x 8.1 = 4050 N | A1 |
| equating this to the centripetal force mv^2/r, giving v = sqrt(field strength x r), since force = mg = mv^2/r | M1 |
| v^2 = 8.1 x 7.0x10^6 = 5.67x10^7 | A1 |
| v = 7.53x10^3 m/s | A1 |
| Final answer: gravitational force = 4050 N, orbital speed = 7.53 x 10^3 m/s | |
| Question 9[6 marks] | |
|---|---|
| Answer or working | Marks |
| using maximum allowed (working) stress = breaking stress/safety factor | M1 |
| maximum working stress = 4.0x10^8/5 = 8.0x10^7 Pa | A1 |
| using stress = force/area, rearranged to area = force/stress | M1 |
| minimum area = 12000/8.0x10^7 = 1.5x10^-4 m^2 | A1 |
| a safety factor allows for uncertainties in the load, material defects, wear or unexpected extra loading | B1 |
| the chosen working stress is kept well below breaking stress to reduce the risk of failure if these uncertainties occur | B1 |
| Final answer: minimum cross-sectional area = 1.5 x 10^-4 m^2; a safety factor allows for uncertainties, defects or unexpected extra load without the cable failing | |
| Question 10[6 marks] | |
|---|---|
| Answer or working | Marks |
| change in flux density = 0.068 - 0.020 = 0.048 T | M1 |
| change in flux per turn = area x change in flux density | M1 |
| change in flux per turn = 4.0x10^-3 x 0.048 = 1.92x10^-4 Wb | A1 |
| change in flux linkage = number of turns x change in flux per turn | M1 |
| change in flux linkage = 250 x 1.92x10^-4 = 0.048 Wb | A1 |
| EMF = change in flux linkage/time = 0.048/0.40 = 0.12 V | A1 |
| Final answer: Change in flux linkage = 0.048 Wb turn; induced EMF magnitude = 0.12 V, with polarity opposing the increasing flux | |