Revision Library
Choose a subject
Menu
Chemistry
Foundation Tier - Grades 1-5

GCSE Chemistry Foundation Paper 2

Covers Atomic Structure and the Periodic Table, Bonding and Structure, Amount of Substance and the Mole and 9 more.

22 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [1 mark]

Using Resources

Hard water reacts with soap to form scum and can leave limescale in pipes and kettles, which are disadvantages.

State one advantage of drinking hard water, other than any effect on taste.

Question 2 [2 marks]

Rates of Reaction and Equilibrium

A student reacts marble chips with dilute hydrochloric acid.

State what would happen to the rate of reaction if the marble chips were crushed into a powder before reacting, and give a reason in terms of surface area.

Question 3 [2 marks]

The Atmosphere

Today's atmosphere is approximately 80% nitrogen and 20% oxygen by volume.

Calculate the volume of oxygen present in a 500 cm3 sample of air.

Question 4 [2 marks]

Energy Changes

Combustion reactions transfer energy to the surroundings, causing the temperature to increase.

State whether combustion is exothermic or endothermic, and give one other example of a reaction of this type.

Question 5 [2 marks]

Using Resources

State what is meant by sustainable development, and give one reason why using finite resources wisely is part of sustainable development.

Question 6 [2 marks]

Chemical Analysis

Sodium hydroxide solution is added to a solution suspected of containing copper(II) ions.

State the colour of the precipitate that would form if copper(II) ions are present, and name the substance formed (the precipitate).

Question 7 [3 marks]

Organic Chemistry

Alkenes are a homologous series of hydrocarbons with the general formula CnH2n.

State the molecular formula of the alkene with 3 carbon atoms, name this alkene, and state the type of bond that makes alkenes different from alkanes.

Question 8 [3 marks]

Concentration, Yield and Atom Economy

A solution contains 8 g of sodium hydroxide dissolved in 500 cm3 of solution.

Calculate the concentration of the solution in g/dm3.

Question 9 [3 marks]

Reactivity and Electrolysis

Magnesium ribbon is added to a solution of silver nitrate. A displacement reaction occurs.

Write a word equation for this reaction, and state which metal is more reactive, magnesium or silver.

Question 10 [4 marks]

Acids, Bases and Salts

Magnesium reacts with dilute hydrochloric acid.

Write a word equation for this reaction, describe the observations you would make, and describe a test to confirm the identity of the gas produced.

Question 11 [4 marks]

Bonding and Structure

Methane has the formula CH4.

State the type of bonding between the carbon and hydrogen atoms, describe what is shared to form each bond, and state the number of these bonds in one molecule of methane.

Question 12 [2 marks]

Chemical Analysis

A student is given two unlabelled solutions, one containing iron(II) ions and one containing iron(III) ions.

Describe a test, using sodium hydroxide solution, that would let the student identify which solution contains which ion, including the result for each.

Question 13 [2 marks]

Rates of Reaction and Equilibrium

Increasing the concentration of a reactant in solution increases the rate of reaction.

Use collision theory to explain why increasing the concentration of a reactant increases the rate of reaction.

Question 14 [2 marks]

Chemical Analysis

In a chromatography experiment, the solvent front travels 9.0 cm from the baseline.

A spot on the chromatogram has an Rf value of 0.60.

Calculate the distance travelled by this spot from the baseline.

Question 15 [2 marks]

Reactivity and Electrolysis

Zinc is less reactive than carbon.

State and explain the method used to extract zinc from zinc oxide.

Question 16 [3 marks]

Atomic Structure and the Periodic Table

A sodium atom, Na, and a sodium ion, Na+, formed when the atom loses one electron, have almost exactly the same relative mass.

Explain why losing an electron to form the ion does not noticeably change the relative mass of the particle.

Question 17 [3 marks]

Acids, Bases and Salts

Dilute nitric acid is added to solid copper(II) oxide, a black solid.

Write a word equation for this reaction, and describe what you would observe.

Question 18 [3 marks]

Chemical Analysis

A student runs paper chromatography on an unknown food dye alongside four known reference dyes, using the same solvent.

The unknown dye produces two separate spots, one of which matches the position of reference dye 2 exactly.

Explain what this shows about the composition of the unknown dye, and explain why the reference dyes must be run using the same solvent as the unknown.

Question 19 [3 marks]

Organic Chemistry

Crude oil contains fractions with different hydrocarbon chain lengths, such as petrol and diesel.

Describe how boiling point, viscosity and flammability each change as the hydrocarbon chain length increases across the fractions of crude oil.

Question 20 [4 marks]

Atomic Structure and the Periodic Table

Sodium and potassium are both in Group 1 of the periodic table.

Potassium reacts more vigorously with water than sodium.

Explain why, in terms of electronic structure.

Question 21 [4 marks]

Amount of Substance and the Mole

A sample of a compound containing only magnesium and oxygen is analysed and found to contain 1.2 g of magnesium combined with 0.8 g of oxygen.

Calculate the empirical formula of this compound. (Ar: Mg = 24, O = 16)

Question 22 [4 marks]

Bonding and Structure

Graphite has a very high melting point, but it is also soft and slippery, and is used as a lubricant and in pencils.

Explain how graphite can have both a very high melting point and be soft and slippery.

Model solutions

Mark scheme for Question 1 [1 mark]
Question 1[1 mark]
Answer or workingMarks
a nutritional benefit from dissolved calcium or magnesium, such as contributing dietary minerals or calcium supporting healthy bones and teethB1
Final answer: Hard water can supply useful dietary calcium and magnesium; calcium supports healthy bones and teeth.
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
The rate increasesB1
Powder has a larger exposed surface area for the same massB1
Final answer: The rate increases; Powder has a larger exposed surface area for the same mass.
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
Oxygen volume = 20 / 100 x 500M1
Oxygen volume = 100 cm3; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Oxygen volume = 20 / 100 x 500; Oxygen volume = 100 cm3.
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
exothermicB1
another valid exothermic reaction, such as acid-alkali neutralisation, oxidation of a metal or a suitable displacement reactionB1
Final answer: Exothermic; Neutralisation of an acid with an alkali is another example.
Mark scheme for Question 5 [2 marks]
Question 5[2 marks]
Answer or workingMarks
Development meets present needs without compromising future generations' ability to meet theirsB1
Conserving finite resources leaves supplies available for the futureB1
Final answer: Development meets present needs without compromising future generations' ability to meet theirs; Conserving finite resources leaves supplies available for the future.
Mark scheme for Question 6 [2 marks]
Question 6[2 marks]
Answer or workingMarks
Blue precipitateB1
Copper(II) hydroxideB1
Final answer: Blue precipitate; Copper(II) hydroxide.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
C3H6B1
PropeneB1
A carbon-carbon double bondB1
Final answer: C3H6; Propene; A carbon-carbon double bond.
Mark scheme for Question 8 [3 marks]
Question 8[3 marks]
Answer or workingMarks
converting 500 cm3 to 0.5 dm3M1
concentration = mass / volumeM1
16 g/dm3A1
Final answer: 500 cm3 = 0.500 dm3; concentration = mass/volume = 8/0.500 = 16 g/dm3.
Mark scheme for Question 9 [3 marks]
Question 9[3 marks]
Answer or workingMarks
magnesium nitrate as a productB1
silver as the other product in magnesium + silver nitrate -> magnesium nitrate + silverB1
magnesium is more reactive than silverB1
Final answer: Magnesium + silver nitrate -> magnesium nitrate + silver; magnesium is more reactive than silver.
Mark scheme for Question 10 [4 marks]
Question 10[4 marks]
Answer or workingMarks
magnesium + hydrochloric acid -> magnesium chloride + hydrogenB1
bubbling/fizzingB1
magnesium getting smaller/dissolving (accept warming as a separate observation)B1
testing the collected gas with a lit splint, giving a squeaky popB1
Final answer: Magnesium + hydrochloric acid -> magnesium chloride + hydrogen; the magnesium fizzes and dissolves; a lit splint gives a squeaky pop, confirming hydrogen gas.
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
covalent bondingB1
a pair of electrons is shared between each bonded pair of atomsB1
one electron in the shared pair is contributed by each atomB1
4 covalent bonds in one molecule of methaneB1
Final answer: Covalent bonding; each bond is a shared pair of electrons, one from each atom; methane contains 4 covalent bonds.
Mark scheme for Question 12 [2 marks]
Question 12[2 marks]
Answer or workingMarks
iron(II) giving a green precipitate with sodium hydroxideB1
iron(III) giving a brown, reddish-brown or orange-brown precipitate with sodium hydroxideB1
Final answer: Add sodium hydroxide solution to each; Iron(II) forms a green precipitate; Iron(III) forms a brown or reddish-brown precipitate.
Mark scheme for Question 13 [2 marks]
Question 13[2 marks]
Answer or workingMarks
more reactant particles per unit volumeB1
more frequent collisions, hence more successful collisions per second at the same temperatureB1
Final answer: There are more reactant particles per unit volume; Collisions occur more frequently; There are more successful collisions per second at the same temperature.
Mark scheme for Question 14 [2 marks]
Question 14[2 marks]
Answer or workingMarks
Distance = Rf x solvent-front distanceM1
0.60 x 9.0 = 5.4 cm; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Distance = Rf x solvent-front distance; 0.60 x 9.0 = 5.4 cm.
Mark scheme for Question 15 [2 marks]
Question 15[2 marks]
Answer or workingMarks
heating zinc oxide with carbon (accept reduction by carbon monoxide)B1
the reducing agent removes oxygen from zinc oxide, leaving zinc metalB1
Final answer: Heat zinc oxide with carbon, or reduce it using carbon monoxide. The reducing agent removes oxygen from zinc oxide to form zinc metal; carbon can do this because it is more reactive than zinc.
Mark scheme for Question 16 [3 marks]
Question 16[3 marks]
Answer or workingMarks
losing an electron leaves the numbers of protons and neutrons unchangedB1
protons and neutrons in the nucleus account for almost all the massB1
an electron has negligible mass compared with a proton or neutron, so removing it causes a negligible mass decreaseB1
Final answer: Losing an electron leaves the numbers of protons and neutrons unchanged. These particles account for almost all the mass in the nucleus. An electron has negligible mass compared with either, so losing one causes a negligible mass decrease.
Mark scheme for Question 17 [3 marks]
Question 17[3 marks]
Answer or workingMarks
copper(II) oxide + nitric acid -> copper(II) nitrate + water (accept copper oxide/copper nitrate in this context)B1
the black solid dissolving/disappearingB1
a blue solution formingB1
Final answer: Copper(II) oxide + nitric acid -> copper(II) nitrate + water. The black solid dissolves, forming a blue solution.
Mark scheme for Question 18 [3 marks]
Question 18[3 marks]
Answer or workingMarks
at least two components, hence a mixtureB1
one component being consistent with dye 2, without claiming a matching Rf proves identity; the other component is not identified by the supplied dataB1
Rf depending on the solvent, making the same solvent necessary for a valid comparisonB1
Final answer: Two spots show at least two components, so the unknown is a mixture; The matching spot is consistent with reference dye 2 but does not prove its identity alone; Rf depends on the solvent, so different solvents would make the comparison unreliable.
Mark scheme for Question 19 [3 marks]
Question 19[3 marks]
Answer or workingMarks
Boiling point increasesB1
Viscosity increasesB1
Flammability decreasesB1
Final answer: Boiling point increases; Viscosity increases; Flammability decreases.
Mark scheme for Question 20 [4 marks]
Question 20[4 marks]
Answer or workingMarks
potassium has an additional occupied electron shell, placing its outer electron further from the nucleusB1
more inner shells increase shielding of the outer electronB1
the outer electron therefore experiences weaker attraction to the nucleusB1
the outer electron is consequently easier to loseB1
Final answer: Potassium has an additional occupied shell, so its outer electron is further from the nucleus and more shielded by inner shells. The weaker nuclear attraction makes this electron easier to lose, so potassium reacts more vigorously.
Mark scheme for Question 21 [4 marks]
Question 21[4 marks]
Answer or workingMarks
moles of Mg = 1.2 / 24 = 0.05 molM1
moles of O = 0.8 / 16 = 0.05 molM1
dividing both by the smaller number of moles (0.05) to find the simplest ratioM1
empirical formula MgOA1
Final answer: n(Mg) = 1.2/24 = 0.050 mol; n(O) = 0.8/16 = 0.050 mol. Divide both by 0.050 to get Mg:O = 1:1, so the empirical formula is MgO.
Mark scheme for Question 22 [4 marks]
Question 22[4 marks]
Answer or workingMarks
graphite is a giant covalent structure, with each carbon atom joined to three others by strong covalent bonds within each layerB1
melting graphite means breaking these strong covalent bonds, which needs a large amount of energy, giving a high melting pointB1
there are only weak forces between the separate layers of graphiteB1
these weak forces let the layers slide over each other easily, making graphite soft and slipperyB1
Final answer: Each carbon atom in graphite forms three strong covalent bonds to neighbours within a layer. Breaking these bonds requires a lot of energy, giving a high melting point. Weak forces between layers allow the layers to slide over each other, making graphite soft and slippery.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.