GCSE Chemistry Higher Paper 1
Covers Atomic Structure and the Periodic Table, Bonding and Structure, Amount of Substance and the Mole and 9 more.
Questions
Question 1 [2 marks]
Bonding and Structure
Magnesium oxide, MgO, is an ionic compound.
Describe how the ions form when magnesium reacts with oxygen, including the charges on the ions formed.
Question 2 [3 marks]
Reactivity and Electrolysis
State the general trend in how vigorously a metal reacts with dilute hydrochloric acid as you move up the reactivity series, and name the two products formed when a reactive metal reacts with dilute hydrochloric acid.
Question 3 [3 marks]
Organic Chemistry
Crude oil is separated into fractions by fractional distillation.
Describe how fractional distillation separates crude oil into different fractions, referring to boiling points.
Question 4 [2 marks]
Using Resources
Recycling metals such as aluminium and copper is important for conserving resources.
Give two reasons why recycling metals is beneficial, other than saving the metal ore itself.
Question 5 [3 marks]
Chemical Analysis
A student runs paper chromatography on an unknown food dye alongside four known reference dyes, using the same solvent.
The unknown dye produces two separate spots, one of which matches the position of reference dye 2 exactly.
Explain what this shows about the composition of the unknown dye, and explain why the reference dyes must be run using the same solvent as the unknown.
Question 6 [3 marks]
Atomic Structure and the Periodic Table
Early in the twentieth century, scientists knew atoms contained protons and electrons, but the nuclear model at that time could not account for the full mass of atoms.
Explain how the later discovery of the neutron resolved this problem.
Question 7 [3 marks]
Rates of Reaction and Equilibrium
Increasing the temperature of a reaction increases the rate of reaction.
Use collision theory to explain why increasing temperature increases the rate of reaction.
Question 8 [4 marks]
Amount of Substance and the Mole
Iron reacts with sulfur: Fe + S -> FeS.
Calculate the mass of iron sulfide produced when 11.2 g of iron reacts completely with sulfur. (Ar: Fe = 56, S = 32)
Question 9 [4 marks]
Concentration, Yield and Atom Economy
A solution of sodium hydroxide has a concentration of 0.500 mol/dm3.
Calculate the mass of sodium hydroxide dissolved in 150 cm3 of this solution. (Ar: Na = 23, O = 16, H = 1)
Question 10 [5 marks]
Acids, Bases and Salts
Describe how the pH of the solution in a flask changes as dilute hydrochloric acid is added gradually to a flask of sodium hydroxide solution, from the start until excess acid has been added.
Question 11 [4 marks]
The Atmosphere
Reducing the amount of carbon dioxide released by human activity can be approached in several ways, including using renewable energy sources instead of fossil fuels, using carbon capture and storage on fossil fuel power stations, and switching to biofuels for transport.
Compare these three approaches. For the same useful energy output, suggest which most directly avoids carbon dioxide production during operation, with a reason.
Question 12 [4 marks]
Reactivity and Electrolysis
Molten lead bromide, PbBr2, is electrolysed using inert electrodes.
Write the half equation for the reaction occurring at the anode, and the half equation for the reaction occurring at the cathode. State which of these reactions is oxidation and which is reduction.
Question 13 [4 marks]
Rates of Reaction and Equilibrium
Nitrogen dioxide forms an equilibrium with dinitrogen tetroxide: 2NO2 <=> N2O4. The forward reaction is exothermic.
Explain the effect of increasing pressure on the position of this equilibrium, and the effect of increasing temperature on the yield of N2O4.
Question 14 [5 marks]
Amount of Substance and the Mole
Hydrogen reacts with nitrogen to form ammonia: N2 + 3H2 -> 2NH3.
A reaction mixture contains 2.0 mol of nitrogen and 3.0 mol of hydrogen.
Determine which reactant is in excess and calculate the maximum number of moles of ammonia that can be formed.
Question 15 [5 marks]
Acids, Bases and Salts
A student wants to prepare a pure, dry sample of copper sulfate crystals from copper(II) oxide and dilute sulfuric acid.
Describe the method the student should use, including how excess copper oxide is removed and how the pure solid crystals are finally obtained.
Question 16 [6 marks]
Energy Changes
A student burns 0.32 g of methanol, CH3OH, and uses the heat released to warm 100 g of water from 20.0 deg C to 30.0 deg C.
Use Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the energy transferred to the water in joules.
Then calculate the energy released per mole of methanol burned, in J/mol. (Mr of methanol = 32)
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| a magnesium atom loses 2 electrons to form Mg2+ | B1 |
| an oxygen atom gains 2 electrons to form O2- | B1 |
| Final answer: Magnesium loses two electrons to form Mg2+; oxygen gains two electrons to form O2-. | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| reactions generally become more vigorous up the reactivity series | B1 |
| a salt (metal chloride) | B1 |
| hydrogen gas | B1 |
| Final answer: Reactions generally become more vigorous up the reactivity series. A reactive metal reacting with dilute hydrochloric acid forms a metal chloride salt and hydrogen gas. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| Crude oil is heated so most of it vaporises | B1 |
| The column is hotter at the bottom and cooler at the top | B1 |
| Fractions condense at different heights according to their boiling ranges, with higher-boiling fractions lower down | B1 |
| Final answer: Crude oil is heated so most of it vaporises; The column is hotter at the bottom and cooler at the top; Fractions condense at different heights according to their boiling ranges, with higher-boiling fractions lower down. | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| one reason other than conserving ore, such as lower energy use, less waste to landfill or lower extraction-related emissions | B1 |
| a second distinct reason; do not count a repeated statement of the same benefit | B1 |
| Final answer: Recycling usually needs less energy than extracting metal from ore; It reduces waste sent to landfill. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| at least two components, hence a mixture | B1 |
| one component being consistent with dye 2, without claiming a matching Rf proves identity; the other component is not identified by the supplied data | B1 |
| Rf depending on the solvent, making the same solvent necessary for a valid comparison | B1 |
| Final answer: Two spots show at least two components, so the unknown is a mixture; The matching spot is consistent with reference dye 2 but does not prove its identity alone; Rf depends on the solvent, so different solvents would make the comparison unreliable. | |
| Question 6[3 marks] | |
|---|---|
| Answer or working | Marks |
| neutrons are particles in the nucleus | B1 |
| a neutron has approximately the same mass as a proton | B1 |
| neutrons have no charge, so they add the missing mass without increasing nuclear charge | B1 |
| Final answer: Neutrons are in the nucleus and each has approximately the mass of a proton but no charge. They account for the previously unexplained mass without increasing nuclear charge. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| particles having more kinetic energy and moving faster | B1 |
| more frequent collisions | B1 |
| a greater proportion of collisions having enough energy to overcome the activation energy, increasing the proportion that are successful | B1 |
| Final answer: Particles have greater kinetic energy; Particles collide more frequently; A greater fraction of collisions have energy at least the activation energy; There are more successful collisions per second. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles of Fe = 11.2 / 56 = 0.2 mol | M1 |
| moles of FeS = moles of Fe (1:1 ratio) | M1 |
| mass = moles x Mr of FeS (88) | M1 |
| 17.6 g | A1 |
| Final answer: n(Fe) = 11.2/56 = 0.20 mol. The 1:1 ratio gives 0.20 mol FeS. Mr(FeS) = 56 + 32 = 88; mass = n x Mr = 0.20 x 88 = 17.6 g. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| converting 150 cm3 to 0.150 dm3 | M1 |
| moles = concentration x volume = 0.500 x 0.150 | M1 |
| moles = 0.075 mol, then mass = moles x Mr (40) | M1 |
| 3.0 g | A1 |
| Final answer: 150 cm3 = 0.150 dm3; n = concentration x volume = 0.500 x 0.150 = 0.0750 mol. Mr(NaOH) = 23 + 16 + 1 = 40; mass = 0.0750 x 40 = 3.0 g. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| the solution starts alkaline, with a high pH (for example around 13-14) | B1 |
| as acid is added, the pH gradually decreases as the alkali is neutralised | B1 |
| at the point where exactly enough acid has been added to react with all the alkali (the equivalence point), the solution is neutral, pH 7 | B1 |
| adding further acid beyond this point decreases the pH further, into the acidic range | B1 |
| eventually, with a large excess of acid added, the pH approaches the pH of the acid used and changes only slightly with further addition | B1 |
| Final answer: The solution starts alkaline, above pH 7. As acid is added the pH falls, gradually at first and steeply near the neutralisation point. It reaches pH 7 when the acid exactly neutralises the alkali, then falls below 7 with excess acid. With a large excess it approaches the pH of the added acid, changing only slightly with further addition. | |
| Question 11[4 marks] | |
|---|---|
| Answer or working | Marks |
| suitable renewable sources avoiding fossil-fuel combustion during operation | B1 |
| CCS capturing carbon dioxide produced by fossil-fuel combustion for storage; limitations such as incomplete capture, energy demand or leakage are optional | B1 |
| biofuel combustion releasing carbon dioxide previously absorbed during plant growth; cultivation or processing emissions are optional detail | B1 |
| a reasoned judgement that renewables most directly avoid combustion carbon dioxide at source for comparable useful energy, without asserting a universal life-cycle ranking | B1 |
| Final answer: Wind or solar generation avoids fossil-fuel combustion during operation. CCS captures carbon dioxide produced by fossil-fuel combustion for storage. Biofuels release carbon dioxide that growing plants previously absorbed. For the same useful energy output, wind or solar most directly avoids carbon dioxide production during operation because no fuel is burned, whereas CCS captures carbon dioxide after production and biofuel combustion still produces it. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| anode half equation: 2Br- -> Br2 + 2e- (accept a correctly balanced positive multiple with equivalent ionic-charge notation) | B1 |
| cathode half equation: Pb2+ + 2e- -> Pb (accept a correctly balanced positive multiple with equivalent ionic-charge notation) | B1 |
| the anode reaction (loss of electrons) is oxidation | B1 |
| the cathode reaction (gain of electrons) is reduction | B1 |
| Final answer: Anode: 2Br- -> Br2 + 2e- (oxidation); Cathode: Pb2+ + 2e- -> Pb (reduction) | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| Increasing pressure shifts equilibrium right, increasing N2O4 yield | B1 |
| The right side has fewer gas molecules: 1 compared with 2 | B1 |
| Increasing temperature shifts equilibrium left and reduces N2O4 yield | B1 |
| This favours the endothermic reverse direction | B1 |
| Final answer: Increasing pressure shifts equilibrium right, increasing N2O4 yield; The right side has fewer gas molecules: 1 compared with 2; Increasing temperature shifts equilibrium left and reduces N2O4 yield; This favours the endothermic reverse direction. | |
| Question 14[5 marks] | |
|---|---|
| Answer or working | Marks |
| finding the hydrogen needed to react fully with 2.0 mol of nitrogen: 2.0 x 3 = 6.0 mol; accept an equivalent stoichiometric comparison using the other reactant or comparing maximum product amounts | M1 |
| comparing the amount required with the amount available, or comparing the possible product amounts, to establish which reactant limits production | M1 |
| hydrogen is the limiting reactant, nitrogen is in excess | A1 |
| using the 3H2 : 2NH3 ratio with 3.0 mol of hydrogen | M1 |
| maximum ammonia formed = 2.0 mol | A1 |
| Final answer: Nitrogen is in excess and hydrogen is limiting: 2.0 mol N2 would need 6.0 mol H2, but only 3.0 mol H2 is available. The 3:2 H2:NH3 ratio gives a maximum of 2.0 mol NH3. | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| warming dilute sulfuric acid and adding copper oxide with stirring until in excess/no more dissolves | B1 |
| filtering off excess copper oxide and retaining the filtrate | B1 |
| gently evaporating some water to concentrate the filtrate to saturation | B1 |
| cooling the concentrated solution to crystallise | B1 |
| filtering the crystals and drying them (accept a small cold distilled-water rinse before drying) | B1 |
| Final answer: Warm the acid and add excess copper oxide, stirring, so all the acid reacts; filter off the unreacted excess oxide; gently evaporate the blue filtrate to make a saturated solution, then leave it to cool and crystallise, and filter and dry the crystals produced. | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| temperature rise = 30.0 - 20.0 = 10.0 deg C | M1 |
| Q = 100 x 4.2 x 10.0 | M1 |
| 4200 J | A1 |
| methanol amount = 0.32 / 32 = 0.010 mol | M1 |
| energy per mole = Q / 0.010 | M1 |
| 420000 J/mol; accept equivalent valid working, sensible rounding and error carried forward; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriate | A1 |
| Final answer: Temperature rise = 30.0 - 20.0 = 10.0 deg C; Q = 100 x 4.2 x 10.0 = 4200 J; Moles methanol = 0.32 / 32 = 0.010 mol; Energy released per mole = 4200 / 0.010 = 420000 J/mol (4.2 x 10^5 J/mol). | |