Revision Library
Choose a subject
Menu
Chemistry
Higher Tier - Grades 4-9

GCSE Chemistry Higher Paper 3

Covers Atomic Structure and the Periodic Table, Bonding and Structure, Amount of Substance and the Mole and 9 more.

17 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [3 marks]

Using Resources

A life cycle assessment (LCA) is used to assess the environmental impact of a product.

Name three stages of a product's life that a life cycle assessment considers.

Question 2 [3 marks]

Amount of Substance and the Mole

Calculate the number of moles in 8.5 g of ammonia, NH3. (Ar: N = 14, H = 1)

Question 3 [2 marks]

Energy Changes

Burning 0.50 g of a fuel releases 12600 J of energy, which is used to heat a beaker of water by 30.0 deg C.

Use Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the mass of water heated.

Question 4 [2 marks]

Chemical Analysis

A student is given two unlabelled solutions, one containing iron(II) ions and one containing iron(III) ions.

Describe a test, using sodium hydroxide solution, that would let the student identify which solution contains which ion, including the result for each.

Question 5 [2 marks]

Rates of Reaction and Equilibrium

Increasing the concentration of a reactant in solution increases the rate of reaction.

Use collision theory to explain why increasing the concentration of a reactant increases the rate of reaction.

Question 6 [3 marks]

Atomic Structure and the Periodic Table

An atom of magnesium has atomic number 12.

Write the electronic structure of a magnesium atom, and use it to state the group and the period of the periodic table in which magnesium is found.

Question 7 [4 marks]

The Atmosphere

The proportion of carbon dioxide in the atmosphere decreased greatly over billions of years, while the proportion of oxygen increased.

Explain two processes that caused carbon dioxide levels to fall over this time.

Question 8 [4 marks]

Bonding and Structure

Diamond and graphite are both giant covalent structures made only of carbon atoms.

Explain why graphite conducts electricity but diamond does not.

Question 9 [4 marks]

Concentration, Yield and Atom Economy

A solution of sodium hydroxide has a concentration of 0.500 mol/dm3.

Calculate the mass of sodium hydroxide dissolved in 150 cm3 of this solution. (Ar: Na = 23, O = 16, H = 1)

Question 10 [4 marks]

Reactivity and Electrolysis

Magnesium reacts with dilute hydrochloric acid: Mg + 2HCl -> MgCl2 + H2.

Explain this reaction in terms of the transfer of electrons, identifying what is oxidised and what is reduced.

Question 11 [2 marks]

Organic Chemistry

A poly(chloroethene), PVC, repeat unit has a two-carbon backbone: one carbon bonded to two hydrogen atoms, the other bonded to one hydrogen atom and one chlorine atom, joined by a single bond, with bonds extending to the next repeat unit on either side.

Identify the monomer used to make this polymer, and explain how you can tell this monomer must have contained a carbon-carbon double bond.

Question 12 [3 marks]

Rates of Reaction and Equilibrium

A catalyst is used in the Haber process to increase the rate at which equilibrium is reached.

Explain why adding a catalyst does not change the position of equilibrium or the percentage yield of ammonia, even though it increases the rate of reaction.

Question 13 [4 marks]

The Atmosphere

Scientists have recorded a correlation between rising atmospheric carbon dioxide concentrations and rising global average temperatures over the last 200 years.

Discuss why correlation alone is not sufficient to prove that carbon dioxide causes climate change, and describe two potential consequences of increasing global temperatures.

Question 14 [5 marks]

Acids, Bases and Salts

Copper(II) oxide reacts with sulfuric acid: CuO + H2SO4 -> CuSO4 + H2O.

4.0 g of copper(II) oxide is reacted with excess dilute sulfuric acid.

Calculate the maximum mass of copper sulfate, CuSO4, that could be produced. (Mr: CuO = 80, CuSO4 = 160)

Question 15 [5 marks]

Energy Changes

A student burns 0.60 g of ethanol and uses the heat released to warm 100 g of water from 20.0 deg C to 44.4 deg C.

Use the equation Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the energy transferred to the water in joules, then calculate the energy released per gram of ethanol burned.

Question 16 [5 marks]

Chemical Analysis

A student is given a solution and asked to test for the presence of sulfate ions and chloride ions.

Describe a test for sulfate ions, including the reagent used and the positive result, and a test for chloride ions, including the reagent used and the positive result.

Explain why a dilute acid is added before the other reagent in each test.

Question 17 [5 marks]

Concentration, Yield and Atom Economy

Sulfuric acid reacts with sodium hydroxide: H2SO4 + 2NaOH -> Na2SO4 + 2H2O.

20.0 cm3 of 0.150 mol/dm3 sulfuric acid is exactly neutralised by a sodium hydroxide solution of concentration 0.100 mol/dm3.

Calculate the volume of sodium hydroxide solution required.

Model solutions

Mark scheme for Question 1 [3 marks]
Question 1[3 marks]
Answer or workingMarks
one life-cycle stage: extraction/processing, manufacture/packaging, transport, use or disposal/recyclingB1
a second distinct stageB1
a third distinct stageB1
Final answer: Raw material extraction and processing; manufacture and packaging; disposal or recycling. Other relevant stages include transport and use.
Mark scheme for Question 2 [3 marks]
Question 2[3 marks]
Answer or workingMarks
Mr of NH3 = 14 + (3 x 1) = 17M1
moles = mass / MrM1
0.5 molA1
Final answer: Mr(NH3) = 14 + 3 x 1 = 17; n = mass/Mr = 8.5/17 = 0.5 mol.
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
m = Q / (c x delta T)M1
m = 12600 / (4.2 x 30.0) = 100 g; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: m = Q / (c x delta T); m = 12600 / (4.2 x 30.0) = 100 g.
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
iron(II) giving a green precipitate with sodium hydroxideB1
iron(III) giving a brown, reddish-brown or orange-brown precipitate with sodium hydroxideB1
Final answer: Add sodium hydroxide solution to each; Iron(II) forms a green precipitate; Iron(III) forms a brown or reddish-brown precipitate.
Mark scheme for Question 5 [2 marks]
Question 5[2 marks]
Answer or workingMarks
more reactant particles per unit volumeB1
more frequent collisions, hence more successful collisions per second at the same temperatureB1
Final answer: There are more reactant particles per unit volume; Collisions occur more frequently; There are more successful collisions per second at the same temperature.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
electronic structure 2,8,2 (accept an equivalent shell diagram or electron-configuration notation; allocate shell credits to the corresponding electron counts)B1
Group 2, because the outer shell has 2 electronsB1
Period 3, because the atom has 3 electron shellsB1
Final answer: 2,8,2; Group 2 because there are two outer electrons; Period 3 because there are three occupied shells.
Mark scheme for Question 7 [4 marks]
Question 7[4 marks]
Answer or workingMarks
one valid process removing atmospheric carbon dioxide, such as photosynthesis, ocean dissolution or carbonate formationB1
explaining how that process removes or stores the carbon, such as incorporation into biomass or carbonatesB1
a second distinct valid processB1
a linked explanation of carbon removal or storage by that second process; accept fossil-fuel formation with burial and long-term storageB1
Final answer: Photosynthesis removes carbon dioxide and incorporates the carbon into biomass, some of which can become stored long term after burial. Carbon dioxide also dissolves in oceans and carbon becomes locked in carbonate sediments and rocks. These are two processes that reduce atmospheric carbon dioxide.
Mark scheme for Question 8 [4 marks]
Question 8[4 marks]
Answer or workingMarks
each carbon atom in graphite forms only 3 covalent bondsB1
one electron per carbon atom in graphite is delocalised and free to moveB1
each carbon atom in diamond forms 4 covalent bondsB1
there are no delocalised electrons or free ions in diamond to carry chargeB1
Final answer: Graphite has delocalised electrons (each carbon forms only 3 bonds) that can move and carry charge; diamond has 4 bonds per carbon and no free electrons or ions.
Mark scheme for Question 9 [4 marks]
Question 9[4 marks]
Answer or workingMarks
converting 150 cm3 to 0.150 dm3M1
moles = concentration x volume = 0.500 x 0.150M1
moles = 0.075 mol, then mass = moles x Mr (40)M1
3.0 gA1
Final answer: 150 cm3 = 0.150 dm3; n = concentration x volume = 0.500 x 0.150 = 0.0750 mol. Mr(NaOH) = 23 + 16 + 1 = 40; mass = 0.0750 x 40 = 3.0 g.
Mark scheme for Question 10 [4 marks]
Question 10[4 marks]
Answer or workingMarks
each magnesium atom loses 2 electrons to form Mg2+ ionsB1
losing electrons is oxidation, so magnesium is oxidisedB1
each pair of hydrogen ions (H+) gains 2 electrons to form a hydrogen molecule, H2B1
gaining electrons is reduction, so the hydrogen ions are reducedB1
Final answer: Each magnesium atom loses two electrons: Mg -> Mg2+ + 2e-, so magnesium is oxidised. Two hydrogen ions gain those electrons: 2H+ + 2e- -> H2, so hydrogen ions are reduced.
Mark scheme for Question 11 [2 marks]
Question 11[2 marks]
Answer or workingMarks
chloroethene, CH2=CHCl; accept either the correct name or unambiguous structural formulaB1
explaining that the monomer C=C bond opens to form single bonds linking the repeat units in addition polymerisationB1
Final answer: Chloroethene, CH2=CHCl; Addition polymerisation opens a monomer C=C bond to form the single-bond backbone and links between repeat units.
Mark scheme for Question 12 [3 marks]
Question 12[3 marks]
Answer or workingMarks
an alternative pathway with lower activation energyB1
accelerating forward and reverse reactions equallyB1
not changing reactant/product energies or the reaction energy change, so the equilibrium constant at that temperature is unchangedB1
Final answer: A catalyst provides an alternative pathway with lower activation energy and accelerates both directions equally. It does not change reactant/product energies or the reaction energy change, so the equilibrium constant at that temperature is unchanged and the equilibrium yield stays the same.
Mark scheme for Question 13 [4 marks]
Question 13[4 marks]
Answer or workingMarks
co-variation not establishing a physical causal mechanism without independent evidenceB1
other changing factors potentially causing or contributing to the temperature trendB1
one valid consequence, such as sea-level rise and coastal floodingB1
a second distinct consequence, such as changed rainfall and regional droughtB1
Final answer: Correlation alone does not establish a causal mechanism; Other changing factors may also affect temperature and must be investigated; Rising sea level can flood low-lying coastal land; Changes in rainfall can cause more droughts in some regions.
Mark scheme for Question 14 [5 marks]
Question 14[5 marks]
Answer or workingMarks
moles of CuO = 4.0 / 80M1
0.05 molA1
moles of CuSO4 = moles of CuO (1:1 ratio)M1
mass = moles x Mr = 0.05 x 160M1
8.0 gA1
Final answer: n(CuO) = 4.0/80 = 0.050 mol. The 1:1 ratio gives 0.050 mol CuSO4. Mass = n x Mr = 0.050 x 160 = 8.0 g.
Mark scheme for Question 15 [5 marks]
Question 15[5 marks]
Answer or workingMarks
temperature rise = 44.4 - 20.0 = 24.4 deg CM1
Q = 100 x 4.2 x 24.4M1
10248 J; accept sensible rounding such as 1.0 x 10^4 JA1
energy per gram = Q / 0.60M1
17080 J/g; accept 17.1 kJ/g or sensible rounding such as 1.7 x 10^4 J/g, with error carried forward from Q; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Temperature rise = 44.4 - 20.0 = 24.4 deg C; Q = 100 x 4.2 x 24.4 = 10248 J; Energy per gram = 10248 / 0.60 = 17080 J/g (about 1.7 x 10^4 J/g).
Mark scheme for Question 16 [5 marks]
Question 16[5 marks]
Answer or workingMarks
acidifying a separate sample with dilute hydrochloric acid then adding barium chloride solution; accept dilute nitric acid then barium nitrate or another compatible soluble barium saltB1
a white barium sulfate precipitateB1
acidifying a fresh sample with dilute nitric acid then adding silver nitrate solutionB1
a white silver chloride precipitateB1
removing interfering carbonate ions that could also precipitate in either test; do not accept hydrochloric acid before silver nitrateB1
Final answer: Sulfate: acidify a fresh portion with dilute hydrochloric acid and add barium chloride solution; A white precipitate indicates sulfate; Chloride: acidify a separate portion with dilute nitric acid and add silver nitrate solution; A white precipitate indicates chloride; The acid removes interfering carbonate ions that could also produce precipitates.
Mark scheme for Question 17 [5 marks]
Question 17[5 marks]
Answer or workingMarks
20.0 cm3 = 0.0200 dm3M1
n(H2SO4) = 0.150 x 0.0200 = 0.00300 molM1
n(NaOH) = 2 x 0.00300 = 0.00600 molM1
V(NaOH) = 0.00600 / 0.100 = 0.0600 dm3M1
0.0600 dm3 or 60.0 cm3, with a consistent unitA1
Final answer: 20.0 cm3 = 0.0200 dm3; n(H2SO4) = 0.150 x 0.0200 = 0.00300 mol. The 1:2 ratio gives n(NaOH) = 0.00600 mol. V = n/c = 0.00600/0.100 = 0.060 dm3, or 60.0 cm3.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.