Revision Library
Choose a subject
Menu
Chemistry
Higher Tier - Grades 4-9

GCSE Chemistry Higher Paper 4

Covers Atomic Structure and the Periodic Table, Bonding and Structure, Amount of Substance and the Mole and 9 more.

18 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [2 marks]

Bonding and Structure

Carbon dioxide, CO2, is a simple molecular covalent compound. Each oxygen atom is joined to the carbon atom by a double covalent bond.

State the total number of shared pairs of electrons in one molecule of carbon dioxide, and state the number of double bonds.

Question 2 [2 marks]

Energy Changes

A catalyst is added to a reaction.

State what a catalyst does to the activation energy of a reaction, and state what happens to the overall energy change (the difference in energy between reactants and products) when a catalyst is used.

Question 3 [3 marks]

The Atmosphere

One model of Earth's early volcanic atmosphere proposes that it formed largely through intense volcanic activity.

Name the gas thought to have made up most of the early atmosphere, name one other gas that was probably present in smaller amounts, and state what happened to water vapour as the Earth cooled.

Question 4 [3 marks]

Reactivity and Electrolysis

A metal spoon is electroplated with copper using a copper sulfate solution and two electrodes.

The spoon is connected to the negative terminal of the power supply and a piece of pure copper is connected to the positive terminal.

Explain why copper is deposited onto the spoon during this process.

Question 5 [3 marks]

Rates of Reaction and Equilibrium

Increasing the temperature of a reaction increases the rate of reaction.

Use collision theory to explain why increasing temperature increases the rate of reaction.

Question 6 [3 marks]

Atomic Structure and the Periodic Table

Early in the twentieth century, scientists knew atoms contained protons and electrons, but the nuclear model at that time could not account for the full mass of atoms.

Explain how the later discovery of the neutron resolved this problem.

Question 7 [3 marks]

Acids, Bases and Salts

Ammonia solution reacts with hydrochloric acid to form the salt ammonium chloride: NH3 + HCl -> NH4Cl.

Explain why this reaction is different from a typical acid-alkali neutralisation reaction, in terms of the products formed, and state one use of ammonium salts.

Question 8 [4 marks]

Concentration, Yield and Atom Economy

Solution A is sodium hydroxide with a concentration of 2.0 g/dm3.

Solution B is sodium hydroxide with a concentration of 0.040 mol/dm3.

Calculate the concentration of solution B in g/dm3, and state which solution, A or B, has the higher concentration. (Ar: Na = 23, O = 16, H = 1)

Question 9 [4 marks]

Amount of Substance and the Mole

A sample of a compound containing only magnesium and oxygen is analysed and found to contain 1.2 g of magnesium combined with 0.8 g of oxygen.

Calculate the empirical formula of this compound. (Ar: Mg = 24, O = 16)

Question 10 [5 marks]

Chemical Analysis

A chromatogram is run with a solvent front travelling 10.0 cm from the baseline.

An unknown ink produces two spots, at 3.0 cm and 7.5 cm from the baseline.

The reference dyes are tested under the same chromatographic conditions, including solvent and stationary phase. Reference dye P has an Rf value of 0.30, and reference dye Q has an Rf value of 0.75.

Calculate the Rf value of each spot in the unknown ink, and state whether the results are consistent with dye P, dye Q, both or neither.

Question 11 [2 marks]

Using Resources

A student extracts copper from a low-grade ore using bioleaching. 250 g of leachate solution contains 4.0 g of dissolved copper.

The student displaces the copper from solution using scrap iron, and recovers 3.2 g of solid copper.

Calculate the percentage of the dissolved copper that was successfully recovered as solid copper.

Question 12 [2 marks]

Concentration, Yield and Atom Economy

Calcium carbonate decomposes on heating to form calcium oxide, the desired product, and carbon dioxide: CaCO3 -> CaO + CO2.

Calculate the atom economy for the formation of calcium oxide, to 1 decimal place. (Mr: CaCO3 = 100, CaO = 56, CO2 = 44)

Question 13 [3 marks]

Organic Chemistry

Long-chain hydrocarbons can be cracked using either catalytic cracking or steam cracking.

Describe one similarity and one difference between these two methods of cracking, and state one product that is common to both methods.

Question 14 [3 marks]

Rates of Reaction and Equilibrium

A catalyst is used in the Haber process to increase the rate at which equilibrium is reached.

Explain why adding a catalyst does not change the position of equilibrium or the percentage yield of ammonia, even though it increases the rate of reaction.

Question 15 [4 marks]

Energy Changes

A student burns ethanol and calculates that 29.7 kJ of energy is released per gram, using the temperature rise of a measured mass of water.

A separate calculation using bond energies predicts that 33.2 kJ of energy should be released per gram of ethanol burned.

Explain why the student's experimental value is lower than the value calculated from bond energies.

Question 16 [4 marks]

Atomic Structure and the Periodic Table

Magnesium exists as three isotopes: Mg-24, Mg-25 and Mg-26.

A sample of magnesium contains 79% Mg-24, 10% Mg-25 and 11% Mg-26.

Calculate the relative atomic mass of this sample to 1 decimal place, and state which isotope is the most abundant in the sample.

Question 17 [5 marks]

Bonding and Structure

Iodine, I2, is a simple molecular covalent substance with a low melting point.

Silicon dioxide, SiO2, is a giant covalent structure with a very high melting point.

Explain, in terms of structure and bonding, why silicon dioxide has a much higher melting point than iodine.

Question 18 [5 marks]

Acids, Bases and Salts

Copper(II) oxide reacts with sulfuric acid: CuO + H2SO4 -> CuSO4 + H2O.

4.0 g of copper(II) oxide is reacted with excess dilute sulfuric acid.

Calculate the maximum mass of copper sulfate, CuSO4, that could be produced. (Mr: CuO = 80, CuSO4 = 160)

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
4 shared pairs of electronsB1
2 double bondsB1
Final answer: 4 shared pairs of electrons; 2 double bonds, each made of 2 shared pairs.
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
Activation energy decreasesB1
The overall energy change is unchangedB1
Final answer: Activation energy decreases; The overall energy change is unchanged.
Mark scheme for Question 3 [3 marks]
Question 3[3 marks]
Answer or workingMarks
carbon dioxideB1
another plausible gas, such as nitrogen, water vapour, methane or ammoniaB1
water vapour condensing to form oceans as the Earth cooledB1
Final answer: Carbon dioxide; Nitrogen was also present; Water vapour condensed to form oceans as the Earth cooled.
Mark scheme for Question 4 [3 marks]
Question 4[3 marks]
Answer or workingMarks
positive Cu2+ ions are attracted to the negative spoonB1
each Cu2+ ion gains two electrons at the spoonB1
neutral copper atoms form and deposit on the spoon; Cu2+ + 2e- -> Cu can earn the electron-gain and atom-formation pointsB1
Final answer: Positive Cu2+ ions are attracted to the negative spoon. Each gains two electrons to become a neutral copper atom, which deposits as copper metal: Cu2+ + 2e- -> Cu.
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
particles having more kinetic energy and moving fasterB1
more frequent collisionsB1
a greater proportion of collisions having enough energy to overcome the activation energy, increasing the proportion that are successfulB1
Final answer: Particles have greater kinetic energy; Particles collide more frequently; A greater fraction of collisions have energy at least the activation energy; There are more successful collisions per second.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
neutrons are particles in the nucleusB1
a neutron has approximately the same mass as a protonB1
neutrons have no charge, so they add the missing mass without increasing nuclear chargeB1
Final answer: Neutrons are in the nucleus and each has approximately the mass of a proton but no charge. They account for the previously unexplained mass without increasing nuclear charge.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
a typical acid-alkali neutralisation produces a salt and water as the two productsB1
the given equation producing ammonium chloride, with no water shown as a productB1
one use of ammonium salts, for example as nitrogen-containing fertilisersB1
Final answer: Typical acid-alkali neutralisation forms salt and water; the supplied equation forms ammonium chloride without water. Ammonium salts are used as fertilisers.
Mark scheme for Question 8 [4 marks]
Question 8[4 marks]
Answer or workingMarks
Mr of NaOH = 23 + 16 + 1 = 40M1
0.040 x 40M1
1.6 g/dm3A1
solution A (2.0 g/dm3) has the higher concentrationB1
Final answer: Mr(NaOH) = 23 + 16 + 1 = 40. Solution B has concentration 0.040 x 40 = 1.6 g/dm3. Solution A, at 2.0 g/dm3, is more concentrated.
Mark scheme for Question 9 [4 marks]
Question 9[4 marks]
Answer or workingMarks
moles of Mg = 1.2 / 24 = 0.05 molM1
moles of O = 0.8 / 16 = 0.05 molM1
dividing both by the smaller number of moles (0.05) to find the simplest ratioM1
empirical formula MgOA1
Final answer: n(Mg) = 1.2/24 = 0.050 mol; n(O) = 0.8/16 = 0.050 mol. Divide both by 0.050 to get Mg:O = 1:1, so the empirical formula is MgO.
Mark scheme for Question 10 [5 marks]
Question 10[5 marks]
Answer or workingMarks
first Rf = 3.0 / 10.0M1
0.30, with no unitsA1
second Rf = 7.5 / 10.0M1
0.75, with no unitsA1
consistency with both P and Q under the same chromatographic conditions; matching Rf values alone do not prove identityB1
Final answer: First Rf = 3.0 / 10.0 = 0.30; second Rf = 7.5 / 10.0 = 0.75, both without units. Under the same chromatographic conditions, the results are consistent with both P and Q, but matching Rf alone does not prove identity.
Mark scheme for Question 11 [2 marks]
Question 11[2 marks]
Answer or workingMarks
Percentage recovered = recovered copper / initial dissolved copper x 100M1
3.2 / 4.0 x 100 = 80%; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Percentage recovered = recovered copper / initial dissolved copper x 100; 3.2 / 4.0 x 100 = 80%.
Mark scheme for Question 12 [2 marks]
Question 12[2 marks]
Answer or workingMarks
atom economy = 56 / 100 x 100 (accept 56 / (56 + 44) x 100)M1
56.0% to 1 decimal placeA1
Final answer: Atom economy = 56 / (56 + 44) x 100 = 56.0%.
Mark scheme for Question 13 [3 marks]
Question 13[3 marks]
Answer or workingMarks
one similarity other than the supplied fact that both crack hydrocarbons, such as both heating hydrocarbon vapourB1
one valid comparison of methods, such as catalytic cracking using a hot catalyst while steam cracking uses steam at a higher temperatureB1
a common product, such as ethene, another alkene or a shorter-chain alkaneB1
Final answer: Both methods heat hydrocarbons to break long chains into smaller molecules; Catalytic cracking uses a hot catalyst, whereas steam cracking uses steam and a higher temperature; Ethene is a product of both.
Mark scheme for Question 14 [3 marks]
Question 14[3 marks]
Answer or workingMarks
an alternative pathway with lower activation energyB1
accelerating forward and reverse reactions equallyB1
not changing reactant/product energies or the reaction energy change, so the equilibrium constant at that temperature is unchangedB1
Final answer: A catalyst provides an alternative pathway with lower activation energy and accelerates both directions equally. It does not change reactant/product energies or the reaction energy change, so the equilibrium constant at that temperature is unchanged and the equilibrium yield stays the same.
Mark scheme for Question 15 [4 marks]
Question 15[4 marks]
Answer or workingMarks
heat escaping to surrounding air instead of heating the measured waterB1
energy heating the container or apparatus instead of the waterB1
incomplete combustion releasing less energy per gram than complete combustionB1
unburned ethanol evaporating so the measured mass loss exceeds the mass actually burned; accept other distinct valid reasons for a lower resultB1
Final answer: Heat escapes to surrounding air and heats the container instead of the measured water. Incomplete combustion can release less energy per gram than complete combustion. Unburned ethanol may also evaporate, increasing the measured mass loss without producing heat and lowering the calculated energy per gram.
Mark scheme for Question 16 [4 marks]
Question 16[4 marks]
Answer or workingMarks
(79 x 24) + (10 x 25) + (11 x 26) as a method (accept equivalent fractional-abundance weighting)M1
summing and correctly normalising the weighted contributions (divide percentage weights by 100, or use fractional weights summing to 1)M1
24.3A1
Mg-24 is the most abundant isotopeB1
Final answer: Weighted contributions = 79 x 24 = 1896, 10 x 25 = 250 and 11 x 26 = 286; sum = 2432. Relative atomic mass = 2432/100 = 24.32, or 24.3 to 1 decimal place. Mg-24 is the most abundant isotope.
Mark scheme for Question 17 [5 marks]
Question 17[5 marks]
Answer or workingMarks
iodine consists of small molecules (I2) held together by weak intermolecular forcesB1
melting iodine only requires overcoming these weak intermolecular forces, needing little energyB1
every atom in silicon dioxide is joined to its neighbours by strong covalent bonds throughout the structureB1
melting silicon dioxide requires breaking many strong covalent bondsB1
breaking covalent bonds needs far more energy than overcoming weak intermolecular forces, giving silicon dioxide a much higher melting pointB1
Final answer: Iodine is a simple molecular substance held together by weak intermolecular forces, needing little energy to melt; silicon dioxide is a giant covalent structure with strong covalent bonds throughout, so far more energy is needed to break it, giving it a much higher melting point.
Mark scheme for Question 18 [5 marks]
Question 18[5 marks]
Answer or workingMarks
moles of CuO = 4.0 / 80M1
0.05 molA1
moles of CuSO4 = moles of CuO (1:1 ratio)M1
mass = moles x Mr = 0.05 x 160M1
8.0 gA1
Final answer: n(CuO) = 4.0/80 = 0.050 mol. The 1:1 ratio gives 0.050 mol CuSO4. Mass = n x Mr = 0.050 x 160 = 8.0 g.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.