GCSE Chemistry Higher Short Paper A
Covers Atomic Structure and the Periodic Table, Bonding and Structure, Amount of Substance and the Mole and 3 more.
Questions
Question 1 [2 marks]
Acids, Bases and Salts
Hydrochloric acid reacts with sodium hydroxide in a neutralisation reaction.
Write a word equation for this reaction and name the salt formed.
Question 2 [3 marks]
Reactivity and Electrolysis
State the general trend in how vigorously a metal reacts with dilute hydrochloric acid as you move up the reactivity series, and name the two products formed when a reactive metal reacts with dilute hydrochloric acid.
Question 3 [2 marks]
Amount of Substance and the Mole
Calculate the number of molecules in 0.50 mol of oxygen gas, O2.
(The Avogadro constant is 6.02 x 10^23 per mol.)
Question 4 [3 marks]
Atomic Structure and the Periodic Table
Mendeleev published an early periodic table in 1869, arranging the known elements mostly in order of atomic weight.
Describe one way Mendeleev's table differed from a table strictly ordered by atomic weight alone, and explain why this decision later proved important.
Question 5 [4 marks]
Bonding and Structure
Diamond and graphite are both giant covalent structures made only of carbon atoms.
Explain why graphite conducts electricity but diamond does not.
Question 6 [4 marks]
Concentration, Yield and Atom Economy
A solution of sodium hydroxide has a concentration of 0.500 mol/dm3.
Calculate the mass of sodium hydroxide dissolved in 150 cm3 of this solution. (Ar: Na = 23, O = 16, H = 1)
Question 7 [4 marks]
Reactivity and Electrolysis
Iron is extracted from iron oxide by reduction with carbon in a blast furnace, but aluminium cannot be extracted from aluminium oxide in the same way.
Explain why carbon can be used to extract iron but not aluminium, and state the method used to extract aluminium instead.
Question 8 [4 marks]
Bonding and Structure
Nanoparticles have dimensions between 1 nm and 100 nm.
Explain why nanoparticles can be more effective as catalysts than the same mass of the bulk material, and give one possible risk of using nanoparticles.
Question 9 [4 marks]
Concentration, Yield and Atom Economy
In a titration, 25.0 cm3 of sodium hydroxide solution exactly neutralises 15.0 cm3 of 0.200 mol/dm3 hydrochloric acid.
NaOH + HCl -> NaCl + H2O.
Calculate the concentration of the sodium hydroxide solution in mol/dm3.
Question 10 [4 marks]
Atomic Structure and the Periodic Table
The model of the atom has changed several times as new experimental evidence was found.
Describe how the atomic model changed from Dalton's model of atoms as solid spheres through to the model used today, naming the scientist or experiment linked to each change and what new feature it added.
Question 11 [6 marks]
Acids, Bases and Salts
Calcium carbonate reacts with nitric acid: CaCO3 + 2HNO3 -> Ca(NO3)2 + H2O + CO2.
5.0 g of calcium carbonate is added to 80 cm3 of 1.00 mol/dm3 nitric acid.
Determine which reactant is in excess, and calculate the maximum volume of carbon dioxide gas produced at room temperature and pressure (RTP). (Ar: Ca = 40, C = 12, O = 16. The molar volume of a gas at RTP is 24 dm3/mol.)
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| sodium chloride as a product, identified as the salt | B1 |
| water as the other product; the full word equation is hydrochloric acid + sodium hydroxide -> sodium chloride + water | B1 |
| Final answer: Hydrochloric acid + sodium hydroxide -> sodium chloride + water; the salt is sodium chloride | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| reactions generally become more vigorous up the reactivity series | B1 |
| a salt (metal chloride) | B1 |
| hydrogen gas | B1 |
| Final answer: Reactions generally become more vigorous up the reactivity series. A reactive metal reacting with dilute hydrochloric acid forms a metal chloride salt and hydrogen gas. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| using number of molecules = moles x Avogadro constant, with 0.50 x 6.02 x 10^23 or equivalent substitution | M1 |
| 3.01 x 10^23 molecules (accept 3.0 x 10^23 molecules to 2 significant figures) | A1 |
| Final answer: Number of molecules = n x NA = 0.50 x 6.02 x 10^23 = 3.01 x 10^23 molecules (3.0 x 10^23 to 2 significant figures). | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| leaving gaps for undiscovered elements OR reversing/swapping atomic-weight order for some elements | B1 |
| using chemical-property patterns to predict missing elements OR to keep chemically similar elements in the same group | B1 |
| later discoveries matching predictions OR later atomic-number ordering supporting the reversed placements; award at most three marks across either coherent route | B1 |
| Final answer: Mendeleev left gaps and used chemical-property patterns to predict undiscovered elements. Later discoveries matching those predictions supported the periodic pattern and increased confidence in his table. Alternatively, he sometimes reversed atomic-weight order to group chemically similar elements; later atomic-number ordering supported these placements and the underlying periodic pattern. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| each carbon atom in graphite forms only 3 covalent bonds | B1 |
| one electron per carbon atom in graphite is delocalised and free to move | B1 |
| each carbon atom in diamond forms 4 covalent bonds | B1 |
| there are no delocalised electrons or free ions in diamond to carry charge | B1 |
| Final answer: Graphite has delocalised electrons (each carbon forms only 3 bonds) that can move and carry charge; diamond has 4 bonds per carbon and no free electrons or ions. | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| converting 150 cm3 to 0.150 dm3 | M1 |
| moles = concentration x volume = 0.500 x 0.150 | M1 |
| moles = 0.075 mol, then mass = moles x Mr (40) | M1 |
| 3.0 g | A1 |
| Final answer: 150 cm3 = 0.150 dm3; n = concentration x volume = 0.500 x 0.150 = 0.0750 mol. Mr(NaOH) = 23 + 16 + 1 = 40; mass = 0.0750 x 40 = 3.0 g. | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| carbon is more reactive than iron, so it can displace/reduce iron from its oxide | B1 |
| aluminium is more reactive than carbon, so carbon cannot displace/reduce it | B1 |
| aluminium is extracted by electrolysis | B1 |
| of molten aluminium oxide (dissolved in cryolite) | B1 |
| Final answer: Carbon is more reactive than iron but less reactive than aluminium, so it can extract iron but not aluminium; aluminium is extracted by electrolysis of molten aluminium oxide. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| nanoparticles have a larger surface area to volume ratio than the bulk material | B1 |
| a greater proportion of atoms are exposed at the surface as catalytic sites | B1 |
| more accessible sites per unit mass allow more reactant particles to react at once, increasing rate | B1 |
| one plausible risk, for example toxicity or harm if inhaled/absorbed, or uncertain long-term health/environmental effects | B1 |
| Final answer: Nanoparticles have a larger surface area to volume ratio, exposing a greater proportion of atoms as catalytic sites. More accessible sites per unit mass allow more reactant particles to react at once, increasing rate. One risk is harm to cells if the particles are inhaled or absorbed. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| converting 15.0 cm3 and 25.0 cm3 to 0.0150 dm3 and 0.0250 dm3 | M1 |
| n(HCl) = 0.200 x 0.0150 = 0.00300 mol | M1 |
| n(NaOH) = n(HCl) by the 1:1 ratio | M1 |
| c(NaOH) = 0.00300 / 0.0250 = 0.120 mol/dm3 | A1 |
| Final answer: 15.0 cm3 = 0.0150 dm3 and 25.0 cm3 = 0.0250 dm3. n(HCl) = 0.200 x 0.0150 = 0.00300 mol. The 1:1 ratio gives n(NaOH) = 0.00300 mol; concentration = 0.00300/0.0250 = 0.12 mol/dm3. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| Thomson/cathode-ray experiments: discovery of electrons led to the plum pudding model, with electrons embedded in diffuse positive charge | B1 |
| Rutherford/alpha scattering: a tiny, dense, positive nucleus with mostly empty space around it | B1 |
| Bohr: electrons occupy shells at specified energies/distances | B1 |
| Chadwick: neutrons in the nucleus | B1 |
| Final answer: Dalton modelled atoms as solid spheres. Thomson's cathode-ray experiments revealed electrons, leading to the plum pudding model of electrons embedded in diffuse positive charge. Rutherford's alpha scattering showed a tiny, dense, positive nucleus with mostly empty space around it. Bohr placed electrons in shells at specified energies/distances. Chadwick discovered neutrons in the nucleus. | |
| Question 11[6 marks] | |
|---|---|
| Answer or working | Marks |
| moles of CaCO3 = 5.0 / 100 = 0.05 mol | M1 |
| moles of HNO3 = 1.00 x (80 / 1000) = 0.08 mol | M1 |
| nitric acid needed to react fully with 0.05 mol CaCO3 = 0.1 mol (1:2 ratio), showing only 0.08 mol is available; accept an equivalent stoichiometric comparison using the other reactant or comparing maximum product amounts | M1 |
| nitric acid is the limiting reactant, calcium carbonate is in excess | A1 |
| moles of CO2 = half the moles of HNO3 reacted (2HNO3 : 1CO2) = 0.04 mol, then volume = moles x 24 | M1 |
| 0.96 dm3 (960 cm3) | A1 |
| Final answer: Mr(CaCO3) = 40 + 12 + 3 x 16 = 100; n(CaCO3) = 5.0/100 = 0.050 mol; n(HNO3) = 1.00 x 80/1000 = 0.080 mol. All the carbonate would need 0.100 mol acid, so nitric acid is limiting and calcium carbonate is in excess. n(CO2) = 0.080/2 = 0.040 mol; volume = 0.040 x 24 = 0.96 dm3 (960 cm3). | |