Revision Library
Choose a subject
Menu
Chemistry
Higher Tier - Grades 4-9

GCSE Chemistry Higher Short Paper B

Covers Energy Changes, Rates of Reaction and Equilibrium, Organic Chemistry and 3 more.

13 questions - 40 marks - calculator allowed

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [2 marks]

Rates of Reaction and Equilibrium

A student reacts calcium carbonate with excess dilute hydrochloric acid in a flask on a mass balance, and carbon dioxide gas escapes.

The total mass decreases from 150.0 g to 148.2 g over 40 seconds.

Calculate the mean rate of reaction, in g per second, over this time.

Question 2 [3 marks]

The Atmosphere

One model of Earth's early volcanic atmosphere proposes that it formed largely through intense volcanic activity.

Name the gas thought to have made up most of the early atmosphere, name one other gas that was probably present in smaller amounts, and state what happened to water vapour as the Earth cooled.

Question 3 [2 marks]

Using Resources

Making one single-use plastic bag uses approximately 5 MJ of energy. Making one reusable cotton bag uses approximately 150 MJ of energy.

Calculate the minimum number of times the cotton bag must be used for its average energy used per use to become lower than the plastic bag's energy used per (single) use.

Question 4 [2 marks]

Organic Chemistry

Bromine reacts with an unsaturated hydrocarbon by adding across each carbon-carbon double bond present, in a 1:1 ratio of bromine molecules to double bonds.

0.010 mol of an unknown hydrocarbon reacts completely with 0.020 mol of bromine.

Calculate the number of carbon-carbon double bonds in one molecule of the hydrocarbon.

Question 5 [3 marks]

Using Resources

Reverse osmosis is one method used to obtain potable water from seawater by desalination.

Explain how reverse osmosis removes dissolved salts from seawater, and explain why this process requires an input of energy.

Question 6 [3 marks]

Rates of Reaction and Equilibrium

A reversible reaction reaches dynamic equilibrium in a closed system.

Explain what is meant by dynamic equilibrium, and state what is true about the concentrations of reactants and products at equilibrium.

Question 7 [3 marks]

Energy Changes

A reaction profile diagram for an exothermic reaction shows the energy of the reactants higher than the energy of the products.

Describe what activation energy represents on this diagram, and explain why the overall reaction releases energy to the surroundings.

Question 8 [4 marks]

Chemical Analysis

A student produces a gas during a reaction and wants to identify it.

Describe a test, and the positive result, that would show the gas produced is hydrogen, and a different test that would show a gas is oxygen.

Question 9 [6 marks]

Energy Changes

Methane burns in oxygen: CH4 + 2O2 -> CO2 + 2H2O.

The bond energies are: C-H = 413 kJ/mol, O=O = 498 kJ/mol, C=O = 805 kJ/mol, O-H = 463 kJ/mol.

Calculate the overall energy change for this reaction, and state whether the reaction is exothermic or endothermic.

Question 10 [2 marks]

Organic Chemistry

Poly(ethene) is made by the addition polymerisation of ethene monomers, C2H4 (Mr = 28).

A sample of poly(ethene) has an average relative molecular mass of 280000.

Calculate the average number of ethene monomer units joined together in one poly(ethene) molecule in this sample.

Question 11 [4 marks]

The Atmosphere

Scientists have recorded a correlation between rising atmospheric carbon dioxide concentrations and rising global average temperatures over the last 200 years.

Discuss why correlation alone is not sufficient to prove that carbon dioxide causes climate change, and describe two potential consequences of increasing global temperatures.

Question 12 [4 marks]

Chemical Analysis

Gas chromatography linked to mass spectrometry (GC-MS) can be used to identify the separate compounds present in a mixture.

Explain how gas chromatography separates a mixture into its components, and explain one advantage of using mass spectrometry, rather than only comparing retention times, to identify each separated component.

Question 13 [2 marks]

Organic Chemistry

A poly(chloroethene), PVC, repeat unit has a two-carbon backbone: one carbon bonded to two hydrogen atoms, the other bonded to one hydrogen atom and one chlorine atom, joined by a single bond, with bonds extending to the next repeat unit on either side.

Identify the monomer used to make this polymer, and explain how you can tell this monomer must have contained a carbon-carbon double bond.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
Mass lost = 150.0 - 148.2 = 1.8 gM1
Mean rate = 1.8 / 40 = 0.045 g/s; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Mass lost = 150.0 - 148.2 = 1.8 g; Mean rate = 1.8 / 40 = 0.045 g/s.
Mark scheme for Question 2 [3 marks]
Question 2[3 marks]
Answer or workingMarks
carbon dioxideB1
another plausible gas, such as nitrogen, water vapour, methane or ammoniaB1
water vapour condensing to form oceans as the Earth cooledB1
Final answer: Carbon dioxide; Nitrogen was also present; Water vapour condensed to form oceans as the Earth cooled.
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
comparing 150 / n with 5, or finding that 150 / 5 = 30 uses gives equal energy per useM1
a minimum of 31 uses, since the energy per use must be strictly lowerA1
Final answer: 150 / 5 = 30 uses gives equal energy per use; More than 30 whole uses are required; The minimum is 31 uses.
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
Double bonds per molecule = moles bromine / moles hydrocarbonM1
0.020 / 0.010 = 2 double bonds per moleculeA1
Final answer: Double bonds per molecule = moles bromine / moles hydrocarbon; 0.020 / 0.010 = 2 double bonds per molecule.
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
high pressure being applied to seawaterB1
water passing through a partially permeable membrane while dissolved salts are rejectedB1
energy being needed to power pumps and overcome the osmotic pressureB1
Final answer: Apply high pressure to seawater; Force water through a partially permeable membrane that rejects dissolved salts; Energy is needed to run pumps and overcome the osmotic pressure.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
Forward and reverse reactions continueB1
Their rates are equalB1
Concentrations of reactants and products remain constant, though not necessarily equalB1
Final answer: Forward and reverse reactions continue; Their rates are equal; Concentrations of reactants and products remain constant, though not necessarily equal.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
Activation energy is the energy difference from reactants to the profile peakB1
It is the minimum energy particles need for a successful reactionB1
the energy difference between reactants and products being released to the surroundings by energy conservation; accept a correct comparison of energy absorbed breaking bonds and energy released forming bondsB1
Final answer: Activation energy is the energy difference from reactants to the profile peak; It is the minimum energy particles need for a successful reaction; More energy is released in forming product bonds than is absorbed breaking reactant bonds, so the excess transfers to the surroundings. Alternatively, the energy difference between reactants and products is released to the surroundings by energy conservation.
Mark scheme for Question 8 [4 marks]
Question 8[4 marks]
Answer or workingMarks
Hydrogen: apply a lighted splintB1
A squeaky pop confirms hydrogenB1
Oxygen: insert a glowing splintB1
The splint relightsB1
Final answer: Hydrogen: apply a lighted splint; A squeaky pop confirms hydrogen; Oxygen: insert a glowing splint; The splint relights.
Mark scheme for Question 9 [6 marks]
Question 9[6 marks]
Answer or workingMarks
bonds broken = 4 x 413 + 2 x 498M1
2648 kJ/molA1
bonds formed = 2 x 805 + 4 x 463M1
3462 kJ/molA1
delta H = 2648 - 3462 = -814 kJ/mol; allow equivalent valid working and error carried forwardA1
exothermic; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateB1
Final answer: Bonds broken: 4 x 413 + 2 x 498 = 2648 kJ/mol; Bonds formed: 2 x 805 + 4 x 463 = 3462 kJ/mol; Delta H = 2648 - 3462 = -814 kJ/mol; Exothermic.
Mark scheme for Question 10 [2 marks]
Question 10[2 marks]
Answer or workingMarks
Average number of monomer units = polymer Mr / monomer MrM1
280000 / 28 = 10000 unitsA1
Final answer: Average number of monomer units = polymer Mr / monomer Mr; 280000 / 28 = 10000 units.
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
co-variation not establishing a physical causal mechanism without independent evidenceB1
other changing factors potentially causing or contributing to the temperature trendB1
one valid consequence, such as sea-level rise and coastal floodingB1
a second distinct consequence, such as changed rainfall and regional droughtB1
Final answer: Correlation alone does not establish a causal mechanism; Other changing factors may also affect temperature and must be investigated; Rising sea level can flood low-lying coastal land; Changes in rainfall can cause more droughts in some regions.
Mark scheme for Question 12 [4 marks]
Question 12[4 marks]
Answer or workingMarks
A carrier gas transports vaporised components through a columnB1
Different interactions with the stationary phase give different retention timesB1
Mass spectrometry gives characteristic mass-to-charge peaks and fragmentation patternsB1
These can distinguish compounds with similar retention times and be compared with reference spectraB1
Final answer: A carrier gas transports vaporised components through a column; Different interactions with the stationary phase give different retention times; Mass spectrometry gives characteristic mass-to-charge peaks and fragmentation patterns; These can distinguish compounds with similar retention times and be compared with reference spectra.
Mark scheme for Question 13 [2 marks]
Question 13[2 marks]
Answer or workingMarks
chloroethene, CH2=CHCl; accept either the correct name or unambiguous structural formulaB1
explaining that the monomer C=C bond opens to form single bonds linking the repeat units in addition polymerisationB1
Final answer: Chloroethene, CH2=CHCl; Addition polymerisation opens a monomer C=C bond to form the single-bond backbone and links between repeat units.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.