Revision Library
Choose a subject
Menu
Chemistry
Higher Tier - Year 10

Year 10 Paper 4: Structure and Reactions

Covers atomic structure and the periodic table, bonding and structure, acids, bases and salts, reactivity and electrolysis, and energy changes.

16 questions - 60 marks - calculator allowed

Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [2 marks]

Bonding and Structure

Carbon dioxide, CO2, is a simple molecular covalent compound. Each oxygen atom is joined to the carbon atom by a double covalent bond.

State the total number of shared pairs of electrons in one molecule of carbon dioxide, and state the number of double bonds.

Question 2 [2 marks]

Acids, Bases and Salts

Potassium hydroxide reacts with nitric acid in a neutralisation reaction.

Write a word equation for this reaction, and name the salt formed.

Question 3 [3 marks]

Atomic Structure and the Periodic Table

An atom of silicon has atomic number 14 and mass number 28.

State the number of protons, and calculate the number of neutrons in this atom.

Question 4 [3 marks]

Reactivity and Electrolysis

A student adds small pieces of four different metals, W, X, Y and Z, to separate solutions of each other's metal salts.

Metal W displaces X and Z from solution but not Y. Metal Y displaces W, X and Z from solution. Metal X displaces Z but not W or Y.

Use this information to place the four metals in order of reactivity, from most to least reactive.

Question 5 [2 marks]

Energy Changes

Burning 0.50 g of a fuel releases 12600 J of energy, which is used to heat a beaker of water by 30.0 deg C.

Use Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the mass of water heated.

Question 6 [3 marks]

Reactivity and Electrolysis

A metal spoon is electroplated with copper using a copper sulfate solution and two electrodes.

The spoon is connected to the negative terminal of the power supply and a piece of pure copper is connected to the positive terminal.

Explain why copper is deposited onto the spoon during this process.

Question 7 [3 marks]

Atomic Structure and the Periodic Table

Mendeleev published an early periodic table in 1869, arranging the known elements mostly in order of atomic weight.

Describe one way Mendeleev's table differed from a table strictly ordered by atomic weight alone, and explain why this decision later proved important.

Question 8 [3 marks]

Energy Changes

Ammonia is made by the reaction N2 + 3H2 -> 2NH3, which has an overall energy change of -92 kJ/mol.

The bond energies are: N to N (triple bond) = 945 kJ/mol, H-H = 436 kJ/mol.

Calculate the bond energy of one N-H bond, giving your answer to 1 decimal place. (There are 6 N-H bonds in total in 2NH3.)

Question 9 [3 marks]

Atomic Structure and the Periodic Table

An atom of magnesium has atomic number 12.

Write the electronic structure of a magnesium atom, and use it to state the group and the period of the periodic table in which magnesium is found.

Question 10 [4 marks]

Energy Changes

In the reaction H2 + Cl2 -> 2HCl, the bond energies are: H-H = 436 kJ/mol, Cl-Cl = 243 kJ/mol, H-Cl = 432 kJ/mol.

Calculate the overall energy change for this reaction, and state whether the reaction is exothermic or endothermic.

Question 11 [4 marks]

Acids, Bases and Salts

A solution of hydrochloric acid and a solution of ethanoic acid both have pH 2.

Explain why the ethanoic acid solution must have a higher concentration than the hydrochloric acid solution.

Question 12 [5 marks]

Energy Changes

A student burns 0.60 g of ethanol and uses the heat released to warm 100 g of water from 20.0 deg C to 44.4 deg C.

Use the equation Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the energy transferred to the water in joules, then calculate the energy released per gram of ethanol burned.

Question 13 [5 marks]

Bonding and Structure

Ionic compounds such as sodium chloride form hard, brittle crystals that shatter easily when struck.

Explain, in terms of structure and bonding, why an ionic crystal shatters when a force is applied, rather than bending.

Question 14 [6 marks]

Energy Changes

A student burns 0.32 g of methanol, CH3OH, and uses the heat released to warm 100 g of water from 20.0 deg C to 30.0 deg C.

Use Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the energy transferred to the water in joules.

Then calculate the energy released per mole of methanol burned, in J/mol. (Mr of methanol = 32)

Question 15 [6 marks]

Acids, Bases and Salts

Magnesium hydroxide reacts with hydrochloric acid: Mg(OH)2 + 2HCl -> MgCl2 + 2H2O.

5.8 g of magnesium hydroxide is reacted with 150 cm3 of 2.00 mol/dm3 hydrochloric acid.

Determine which reactant is in excess, and calculate the maximum mass of magnesium chloride that can be formed. (Mr: Mg(OH)2 = 58, MgCl2 = 95)

Question 16 [6 marks]

Bonding and Structure

A cube-shaped nanoparticle has sides of length 2 nm. A second, larger cube-shaped particle of the same material has sides of length 6 nm.

Calculate the surface area to volume ratio for each particle, and use your answer to explain which particle would make the more effective catalyst per unit mass.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
4 shared pairs of electronsB1
2 double bondsB1
Final answer: 4 shared pairs of electrons; 2 double bonds, each made of 2 shared pairs.
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
potassium nitrate as a product, identified as the saltB1
water as the other product; the full word equation is potassium hydroxide + nitric acid -> potassium nitrate + waterB1
Final answer: Potassium hydroxide + nitric acid -> potassium nitrate + water; the salt is potassium nitrate
Mark scheme for Question 3 [3 marks]
Question 3[3 marks]
Answer or workingMarks
14 protonsB1
neutrons = mass number - atomic numberM1
14 neutronsA1
Final answer: 14 protons; neutrons = mass number - atomic number = 28 - 14 = 14.
Mark scheme for Question 4 [3 marks]
Question 4[3 marks]
Answer or workingMarks
placing Y above WB1
placing W above XB1
placing X above Z; correct full order is Y, W, X, ZB1
Final answer: Most to least reactive: Y, W, X, Z
Mark scheme for Question 5 [2 marks]
Question 5[2 marks]
Answer or workingMarks
m = Q / (c x delta T)M1
m = 12600 / (4.2 x 30.0) = 100 g; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: m = Q / (c x delta T); m = 12600 / (4.2 x 30.0) = 100 g.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
positive Cu2+ ions are attracted to the negative spoonB1
each Cu2+ ion gains two electrons at the spoonB1
neutral copper atoms form and deposit on the spoon; Cu2+ + 2e- -> Cu can earn the electron-gain and atom-formation pointsB1
Final answer: Positive Cu2+ ions are attracted to the negative spoon. Each gains two electrons to become a neutral copper atom, which deposits as copper metal: Cu2+ + 2e- -> Cu.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
leaving gaps for undiscovered elements OR reversing/swapping atomic-weight order for some elementsB1
using chemical-property patterns to predict missing elements OR to keep chemically similar elements in the same groupB1
later discoveries matching predictions OR later atomic-number ordering supporting the reversed placements; award at most three marks across either coherent routeB1
Final answer: Mendeleev left gaps and used chemical-property patterns to predict undiscovered elements. Later discoveries matching those predictions supported the periodic pattern and increased confidence in his table. Alternatively, he sometimes reversed atomic-weight order to group chemically similar elements; later atomic-number ordering supported these placements and the underlying periodic pattern.
Mark scheme for Question 8 [3 marks]
Question 8[3 marks]
Answer or workingMarks
bonds broken = 945 + 3 x 436 = 2253 kJ/molM1
2253 - 6E = -92, or an equivalent rearrangementM1
E = 390.8 kJ/mol to 1 decimal place; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Bonds broken: 945 + 3 x 436 = 2253 kJ/mol; 2253 - 6E = -92, so 6E = 2345 kJ/mol; E = 2345 / 6 = 390.8 kJ/mol to 1 decimal place.
Mark scheme for Question 9 [3 marks]
Question 9[3 marks]
Answer or workingMarks
electronic structure 2,8,2 (accept an equivalent shell diagram or electron-configuration notation; allocate shell credits to the corresponding electron counts)B1
Group 2, because the outer shell has 2 electronsB1
Period 3, because the atom has 3 electron shellsB1
Final answer: 2,8,2; Group 2 because there are two outer electrons; Period 3 because there are three occupied shells.
Mark scheme for Question 10 [4 marks]
Question 10[4 marks]
Answer or workingMarks
Bonds broken: 436 + 243 = 679 kJ/molM1
Bonds formed: 2 x 432 = 864 kJ/molM1
Delta H = 679 - 864 = -185 kJ/molA1
Exothermic; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateB1
Final answer: Bonds broken: 436 + 243 = 679 kJ/mol; Bonds formed: 2 x 432 = 864 kJ/mol; Delta H = 679 - 864 = -185 kJ/mol; Exothermic.
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
pH 2 means both solutions have the same concentration of hydrogen ions, H+B1
hydrochloric acid is a strong acid and fully ionises, so its H+ concentration equals its acid concentrationB1
ethanoic acid is a weak acid and only partially ionises, so its H+ concentration is much lower than its acid concentrationB1
to reach the same H+ concentration (same pH) as the hydrochloric acid, a much higher concentration of ethanoic acid is neededB1
Final answer: Both solutions have the same H+ concentration at pH 2, but HCl fully ionises so its H+ concentration equals its acid concentration, while ethanoic acid only partially ionises; a much higher concentration of ethanoic acid is therefore needed to reach the same H+ concentration.
Mark scheme for Question 12 [5 marks]
Question 12[5 marks]
Answer or workingMarks
temperature rise = 44.4 - 20.0 = 24.4 deg CM1
Q = 100 x 4.2 x 24.4M1
10248 J; accept sensible rounding such as 1.0 x 10^4 JA1
energy per gram = Q / 0.60M1
17080 J/g; accept 17.1 kJ/g or sensible rounding such as 1.7 x 10^4 J/g, with error carried forward from Q; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Temperature rise = 44.4 - 20.0 = 24.4 deg C; Q = 100 x 4.2 x 24.4 = 10248 J; Energy per gram = 10248 / 0.60 = 17080 J/g (about 1.7 x 10^4 J/g).
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
an ionic lattice consists of alternating positive and negative ions held together by strong electrostatic (ionic) forces of attractionB1
a force applied to the crystal can cause one layer of ions to shift slightly out of place relative to the layer next to itB1
this shift brings ions of the same charge next to each otherB1
ions with the same charge repel each other stronglyB1
this repulsion forces the layers apart, splitting (shattering) the crystal along that planeB1
Final answer: An ionic lattice contains alternating positive and negative ions held by electrostatic attraction. A force shifts one layer relative to another, bringing like-charged ions together. Their strong repulsion forces the layers apart and splits the crystal rather than allowing it to bend.
Mark scheme for Question 14 [6 marks]
Question 14[6 marks]
Answer or workingMarks
temperature rise = 30.0 - 20.0 = 10.0 deg CM1
Q = 100 x 4.2 x 10.0M1
4200 JA1
methanol amount = 0.32 / 32 = 0.010 molM1
energy per mole = Q / 0.010M1
420000 J/mol; accept equivalent valid working, sensible rounding and error carried forward; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Temperature rise = 30.0 - 20.0 = 10.0 deg C; Q = 100 x 4.2 x 10.0 = 4200 J; Moles methanol = 0.32 / 32 = 0.010 mol; Energy released per mole = 4200 / 0.010 = 420000 J/mol (4.2 x 10^5 J/mol).
Mark scheme for Question 15 [6 marks]
Question 15[6 marks]
Answer or workingMarks
moles of Mg(OH)2 = 5.8 / 58 = 0.1 molM1
moles of HCl = 2.00 x (150 / 1000) = 0.3 molM1
HCl needed to react fully with 0.1 mol Mg(OH)2 = 0.2 mol (1:2 ratio), showing 0.3 mol is more than enough; accept an equivalent stoichiometric comparison using the other reactant or comparing maximum product amountsM1
hydrochloric acid is in excess, magnesium hydroxide is the limiting reactantA1
moles of MgCl2 = moles of Mg(OH)2 (1:1 ratio) = 0.1 molM1
mass of MgCl2 = 0.1 x 95 = 9.5 gA1
Final answer: n(Mg(OH)2) = 5.8/58 = 0.100 mol; n(HCl) = 2.00 x 150/1000 = 0.300 mol. The 1:2 ratio requires 0.200 mol HCl, so hydrochloric acid is in excess. The 1:1 Mg(OH)2:MgCl2 ratio gives 0.100 mol MgCl2; mass = 0.100 x 95 = 9.5 g.
Mark scheme for Question 16 [6 marks]
Question 16[6 marks]
Answer or workingMarks
surface area of the 2 nm cube = 6 x (2 x 2) = 24 nm2M1
volume of the 2 nm cube = 2 x 2 x 2 = 8 nm3, giving a surface area to volume ratio of 24:8 = 3 nm^-1M1
surface area of the 6 nm cube = 6 x (6 x 6) = 216 nm2M1
volume of the 6 nm cube = 6 x 6 x 6 = 216 nm3, giving a surface area to volume ratio of 216:216 = 1 nm^-1M1
the 2 nm particle has the greater surface area to volume ratio (3 nm^-1 compared with 1 nm^-1)A1
a greater surface area to volume ratio means a greater proportion of atoms are exposed at the surface and able to react, making the smaller particle the more effective catalyst per unit massB1
Final answer: For the 2 nm cube, surface area = 6 x 2^2 = 24 nm2 and volume = 2^3 = 8 nm3, so SA/V = 3 nm^-1 (3:1 using nm2 and nm3). For the 6 nm cube, surface area = 6 x 6^2 = 216 nm2 and volume = 6^3 = 216 nm3, so SA/V = 1 nm^-1 (1:1). The 2 nm particle has the greater ratio and a greater proportion of atoms exposed as catalytic sites, so is more effective per unit mass.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.