Revision Library
Choose a subject
Menu
Chemistry
Higher Tier - Year 10

Year 10 Paper 5: Quantitative Chemistry and Reactions

Covers amount of substance and the mole, concentration, yield and atom economy, acids, bases and salts, reactivity and electrolysis, and energy changes.

16 questions - 60 marks - calculator allowed

Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [2 marks]

Acids, Bases and Salts

Hydrochloric acid reacts with sodium hydroxide in a neutralisation reaction.

Write a word equation for this reaction and name the salt formed.

Question 2 [2 marks]

Energy Changes

A catalyst is added to a reaction.

State what a catalyst does to the activation energy of a reaction, and state what happens to the overall energy change (the difference in energy between reactants and products) when a catalyst is used.

Question 3 [3 marks]

Reactivity and Electrolysis

State the general trend in how vigorously a metal reacts with dilute hydrochloric acid as you move up the reactivity series, and name the two products formed when a reactive metal reacts with dilute hydrochloric acid.

Question 4 [2 marks]

Concentration, Yield and Atom Economy

Ethanol can be produced by fermentation of glucose, C6H12O6 -> 2C2H5OH + 2CO2, or by the hydration of ethene, C2H4 + H2O -> C2H5OH.

State the atom economy of the hydration reaction, and explain why the fermentation reaction has a lower atom economy, without calculating it.

Question 5 [3 marks]

Energy Changes

A reaction profile diagram for an endothermic reaction shows the energy of the products higher than the energy of the reactants.

Describe what activation energy represents on this diagram, and explain why the overall reaction takes in energy from the surroundings.

Question 6 [3 marks]

Reactivity and Electrolysis

A student adds small pieces of four different metals, W, X, Y and Z, to separate solutions of each other's metal salts.

Metal W displaces X and Z from solution but not Y. Metal Y displaces W, X and Z from solution. Metal X displaces Z but not W or Y.

Use this information to place the four metals in order of reactivity, from most to least reactive.

Question 7 [4 marks]

Amount of Substance and the Mole

Iron reacts with sulfur: Fe + S -> FeS.

Calculate the mass of iron sulfide produced when 11.2 g of iron reacts completely with sulfur. (Ar: Fe = 56, S = 32)

Question 8 [4 marks]

Reactivity and Electrolysis

Iron is extracted from iron oxide by reduction with carbon in a blast furnace, but aluminium cannot be extracted from aluminium oxide in the same way.

Explain why carbon can be used to extract iron but not aluminium, and state the method used to extract aluminium instead.

Question 9 [5 marks]

Concentration, Yield and Atom Economy

A student dissolves 5.6 g of potassium hydroxide, KOH, in water to make 200 cm3 of solution.

Calculate the concentration of the solution in mol/dm3. (Ar: K = 39, O = 16, H = 1)

Question 10 [4 marks]

Acids, Bases and Salts

A solution of hydrochloric acid and a solution of ethanoic acid both have pH 2.

Explain why the ethanoic acid solution must have a higher concentration than the hydrochloric acid solution.

Question 11 [2 marks]

Concentration, Yield and Atom Economy

Calcium carbonate decomposes on heating to form calcium oxide, the desired product, and carbon dioxide: CaCO3 -> CaO + CO2.

Calculate the atom economy for the formation of calcium oxide, to 1 decimal place. (Mr: CaCO3 = 100, CaO = 56, CO2 = 44)

Question 12 [4 marks]

Acids, Bases and Salts

A solution of hydrochloric acid has pH 1. A second solution, made by diluting the first, has pH 3.

Explain what this change in pH tells you about the change in hydrogen ion concentration, and explain why diluting an acid increases its pH.

Question 13 [5 marks]

Amount of Substance and the Mole

A sample of an iron oxide is analysed and found to contain 7.0 g of iron combined with 3.0 g of oxygen.

Calculate the empirical formula of this iron oxide. (Ar: Fe = 56, O = 16)

Question 14 [5 marks]

Concentration, Yield and Atom Economy

Sulfuric acid reacts with sodium hydroxide: H2SO4 + 2NaOH -> Na2SO4 + 2H2O.

20.0 cm3 of 0.150 mol/dm3 sulfuric acid is exactly neutralised by a sodium hydroxide solution of concentration 0.100 mol/dm3.

Calculate the volume of sodium hydroxide solution required.

Question 15 [6 marks]

Amount of Substance and the Mole

Magnesium burns in oxygen: 2Mg + O2 -> 2MgO.

4.8 g of magnesium is heated with 1.6 g of oxygen gas.

Determine which reactant is in excess, and calculate the maximum mass of magnesium oxide that can be formed. (Ar: Mg = 24, O = 16)

Question 16 [6 marks]

Energy Changes

Propane burns completely in oxygen: C3H8 + 5O2 -> 3CO2 + 4H2O.

One molecule of propane contains 2 carbon-carbon bonds and 8 carbon-hydrogen bonds.

The bond energies are: C-C = 347 kJ/mol, C-H = 413 kJ/mol, O=O = 498 kJ/mol, C=O = 805 kJ/mol, O-H = 463 kJ/mol.

Calculate the overall energy change for this reaction, and state whether the reaction is exothermic or endothermic.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
sodium chloride as a product, identified as the saltB1
water as the other product; the full word equation is hydrochloric acid + sodium hydroxide -> sodium chloride + waterB1
Final answer: Hydrochloric acid + sodium hydroxide -> sodium chloride + water; the salt is sodium chloride
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
Activation energy decreasesB1
The overall energy change is unchangedB1
Final answer: Activation energy decreases; The overall energy change is unchanged.
Mark scheme for Question 3 [3 marks]
Question 3[3 marks]
Answer or workingMarks
reactions generally become more vigorous up the reactivity seriesB1
a salt (metal chloride)B1
hydrogen gasB1
Final answer: Reactions generally become more vigorous up the reactivity series. A reactive metal reacting with dilute hydrochloric acid forms a metal chloride salt and hydrogen gas.
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
the hydration reaction has an atom economy of 100%B1
because some of the mass of the reactant ends up in the unwanted carbon dioxide by-product rather than the desired ethanol, the fermentation reaction has a lower atom economyB1
Final answer: The hydration reaction has 100% atom economy because ethanol is its only product; fermentation also produces carbon dioxide as a by-product, so some of the reactant mass is wasted, giving it a lower atom economy.
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
Activation energy is the energy difference from reactants to the profile peakB1
It is the minimum energy particles need for a successful reactionB1
the energy difference between reactants and products being supplied from the surroundings by energy conservation; accept a correct comparison of energy absorbed breaking bonds and energy released forming bondsB1
Final answer: Activation energy is the energy difference from reactants to the profile peak; It is the minimum energy particles need for a successful reaction; More energy is absorbed breaking reactant bonds than is released forming product bonds, so the shortfall is taken from the surroundings. Alternatively, the energy difference between reactants and products is supplied from the surroundings by energy conservation.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
placing Y above WB1
placing W above XB1
placing X above Z; correct full order is Y, W, X, ZB1
Final answer: Most to least reactive: Y, W, X, Z
Mark scheme for Question 7 [4 marks]
Question 7[4 marks]
Answer or workingMarks
moles of Fe = 11.2 / 56 = 0.2 molM1
moles of FeS = moles of Fe (1:1 ratio)M1
mass = moles x Mr of FeS (88)M1
17.6 gA1
Final answer: n(Fe) = 11.2/56 = 0.20 mol. The 1:1 ratio gives 0.20 mol FeS. Mr(FeS) = 56 + 32 = 88; mass = n x Mr = 0.20 x 88 = 17.6 g.
Mark scheme for Question 8 [4 marks]
Question 8[4 marks]
Answer or workingMarks
carbon is more reactive than iron, so it can displace/reduce iron from its oxideB1
aluminium is more reactive than carbon, so carbon cannot displace/reduce itB1
aluminium is extracted by electrolysisB1
of molten aluminium oxide (dissolved in cryolite)B1
Final answer: Carbon is more reactive than iron but less reactive than aluminium, so it can extract iron but not aluminium; aluminium is extracted by electrolysis of molten aluminium oxide.
Mark scheme for Question 9 [5 marks]
Question 9[5 marks]
Answer or workingMarks
Mr of KOH = 39 + 16 + 1 = 56M1
moles = 5.6 / 56 = 0.1 molM1
converting 200 cm3 to 0.2 dm3M1
concentration = moles / volumeM1
0.5 mol/dm3A1
Final answer: Mr(KOH) = 39 + 16 + 1 = 56; n = 5.6/56 = 0.100 mol. 200 cm3 = 0.200 dm3; concentration = 0.100/0.200 = 0.5 mol/dm3.
Mark scheme for Question 10 [4 marks]
Question 10[4 marks]
Answer or workingMarks
pH 2 means both solutions have the same concentration of hydrogen ions, H+B1
hydrochloric acid is a strong acid and fully ionises, so its H+ concentration equals its acid concentrationB1
ethanoic acid is a weak acid and only partially ionises, so its H+ concentration is much lower than its acid concentrationB1
to reach the same H+ concentration (same pH) as the hydrochloric acid, a much higher concentration of ethanoic acid is neededB1
Final answer: Both solutions have the same H+ concentration at pH 2, but HCl fully ionises so its H+ concentration equals its acid concentration, while ethanoic acid only partially ionises; a much higher concentration of ethanoic acid is therefore needed to reach the same H+ concentration.
Mark scheme for Question 11 [2 marks]
Question 11[2 marks]
Answer or workingMarks
atom economy = 56 / 100 x 100 (accept 56 / (56 + 44) x 100)M1
56.0% to 1 decimal placeA1
Final answer: Atom economy = 56 / (56 + 44) x 100 = 56.0%.
Mark scheme for Question 12 [4 marks]
Question 12[4 marks]
Answer or workingMarks
a rise of one pH unit means a tenfold decrease in H+ concentrationB1
a rise of two units means H+ concentration becomes 1/100 of its original valueB1
adding water increases solution volume without adding acidB1
this lowers H+ concentration and therefore raises pHB1
Final answer: A rise of one pH unit means a tenfold decrease in H+ concentration. From pH 1 to pH 3 it becomes 1/100 of the original value. Adding water increases volume without adding acid, reducing H+ concentration and raising pH towards neutral.
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
moles of Fe = 7.0 / 56 = 0.125 molM1
moles of O = 3.0 / 16 = 0.1875 molM1
dividing both by the smaller number of moles (0.125), giving a ratio of Fe : O = 1 : 1.5M1
multiplying both parts of the ratio by 2 to obtain whole numbersM1
empirical formula Fe2O3A1
Final answer: n(Fe) = 7.0/56 = 0.125 mol; n(O) = 3.0/16 = 0.1875 mol. Divide by 0.125 to get Fe:O = 1:1.5, then multiply both by 2 to give 2:3. The empirical formula is Fe2O3.
Mark scheme for Question 14 [5 marks]
Question 14[5 marks]
Answer or workingMarks
20.0 cm3 = 0.0200 dm3M1
n(H2SO4) = 0.150 x 0.0200 = 0.00300 molM1
n(NaOH) = 2 x 0.00300 = 0.00600 molM1
V(NaOH) = 0.00600 / 0.100 = 0.0600 dm3M1
0.0600 dm3 or 60.0 cm3, with a consistent unitA1
Final answer: 20.0 cm3 = 0.0200 dm3; n(H2SO4) = 0.150 x 0.0200 = 0.00300 mol. The 1:2 ratio gives n(NaOH) = 0.00600 mol. V = n/c = 0.00600/0.100 = 0.060 dm3, or 60.0 cm3.
Mark scheme for Question 15 [6 marks]
Question 15[6 marks]
Answer or workingMarks
moles of Mg = 4.8 / 24 = 0.2 molM1
moles of O2 = 1.6 / 32 = 0.05 molM1
oxygen needed to react fully with 0.2 mol Mg = 0.1 mol (2Mg : 1O2), showing only 0.05 mol is available; accept an equivalent stoichiometric comparison using the other reactant or comparing maximum product amountsM1
oxygen is the limiting reactant, magnesium is in excessA1
moles of MgO = 2 x moles of O2 reacted (1O2 : 2MgO) = 0.1 molM1
mass of MgO = 0.1 x 40 = 4.0 gA1
Final answer: n(Mg) = 4.8/24 = 0.20 mol; n(O2) = 1.6/32 = 0.050 mol. All the Mg would require 0.10 mol O2, so oxygen is limiting and magnesium is in excess. n(MgO) = 2 x 0.050 = 0.10 mol; maximum mass = 0.10 x 40 = 4.0 g.
Mark scheme for Question 16 [6 marks]
Question 16[6 marks]
Answer or workingMarks
bonds broken = 2 x 347 + 8 x 413 + 5 x 498M1
6488 kJ/molA1
bonds formed = 6 x 805 + 8 x 463M1
8534 kJ/molA1
delta H = 6488 - 8534 = -2046 kJ/mol; allow equivalent valid working and error carried forwardA1
exothermic; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateB1
Final answer: Bonds broken: 2 x 347 + 8 x 413 + 5 x 498 = 6488 kJ/mol; Bonds formed: 6 x 805 + 8 x 463 = 8534 kJ/mol; Delta H = 6488 - 8534 = -2046 kJ/mol; Exothermic.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.