Year 10 Paper 6: Full Topic Paper
Covers atomic structure and the periodic table, bonding and structure, amount of substance and the mole, concentration, yield and atom economy, acids, bases and salts, reactivity and electrolysis, and energy changes.
Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [2 marks]
Acids, Bases and Salts
Hydrochloric acid reacts with sodium hydroxide in a neutralisation reaction.
Write a word equation for this reaction and name the salt formed.
Question 2 [3 marks]
Concentration, Yield and Atom Economy
A solution contains 8 g of sodium hydroxide dissolved in 500 cm3 of solution.
Calculate the concentration of the solution in g/dm3.
Question 3 [3 marks]
Reactivity and Electrolysis
Molten lead bromide is electrolysed using inert electrodes.
Name the product formed at the cathode (negative electrode) and the product formed at the anode (positive electrode), and explain why lead bromide must be molten or in solution to be electrolysed.
Question 4 [3 marks]
Bonding and Structure
Methane, CH4, is a gas at room temperature. Octane, C8H18, is a liquid at room temperature.
Both are simple molecular covalent substances made only of carbon and hydrogen atoms.
Explain, in terms of intermolecular forces, why octane has a higher boiling point than methane.
Question 5 [3 marks]
Energy Changes
A reaction profile diagram for an endothermic reaction shows the energy of the products higher than the energy of the reactants.
Describe what activation energy represents on this diagram, and explain why the overall reaction takes in energy from the surroundings.
Question 6 [5 marks]
Atomic Structure and the Periodic Table
Fluorine and chlorine are both in Group 7 of the periodic table.
Fluorine reacts more vigorously than chlorine when forming compounds with metals.
Explain why, in terms of electronic structure, reactivity decreases going down Group 7.
Question 7 [3 marks]
Bonding and Structure
Sodium chloride conducts electricity when molten or dissolved in water, but not when solid.
Explain, in terms of structure and bonding, why solid sodium chloride does not conduct electricity, and why molten sodium chloride does conduct electricity.
Question 8 [4 marks]
Amount of Substance and the Mole
Iron reacts with sulfur: Fe + S -> FeS.
Calculate the mass of iron sulfide produced when 11.2 g of iron reacts completely with sulfur. (Ar: Fe = 56, S = 32)
Question 9 [4 marks]
Acids, Bases and Salts
Dilute sulfuric acid is added to a sample of magnesium carbonate.
Describe what you would observe, name the gas produced and describe a test to confirm the identity of this gas.
Question 10 [4 marks]
Bonding and Structure
Pure copper is a soft metal, but bronze, an alloy of copper and tin, is much harder.
Explain, in terms of structure, why an alloy is harder than the pure metal it is made from.
Question 11 [5 marks]
Energy Changes
Two fuels, A and B, are each burned to heat 100 g of water from 20.0 deg C, using Q = m c (delta T) with c = 4.2 J/g deg C.
Burning 0.40 g of fuel A raises the water temperature to 36.0 deg C. Burning 0.50 g of fuel B raises the water temperature to 44.0 deg C.
Calculate the energy released per gram for each fuel, and state which fuel releases more energy per gram.
Question 12 [3 marks]
Bonding and Structure
Poly(ethene) is a long-chain covalent substance held together by strong covalent bonds within each chain, but it has a much lower melting point than diamond.
Explain why.
Question 13 [2 marks]
Concentration, Yield and Atom Economy
Calcium carbonate decomposes on heating to form calcium oxide, the desired product, and carbon dioxide: CaCO3 -> CaO + CO2.
Calculate the atom economy for the formation of calcium oxide, to 1 decimal place. (Mr: CaCO3 = 100, CaO = 56, CO2 = 44)
Question 14 [3 marks]
Energy Changes
In a reversible reaction, the activation energy of the forward reaction is 80 kJ/mol, and the activation energy of the reverse reaction is 45 kJ/mol.
Use these values to determine the overall energy change, delta H, for the forward reaction, and state whether the forward reaction is exothermic or endothermic.
Question 15 [4 marks]
Reactivity and Electrolysis
Molten lead bromide, PbBr2, is electrolysed using inert electrodes.
Write the half equation for the reaction occurring at the anode, and the half equation for the reaction occurring at the cathode. State which of these reactions is oxidation and which is reduction.
Question 16 [4 marks]
Acids, Bases and Salts
A solution of hydrochloric acid has pH 1. A second solution, made by diluting the first, has pH 3.
Explain what this change in pH tells you about the change in hydrogen ion concentration, and explain why diluting an acid increases its pH.
Question 17 [5 marks]
Atomic Structure and the Periodic Table
The plum pudding model of the atom was replaced by the nuclear model after the alpha particle scattering experiment.
Describe the results of this experiment and explain what each result showed about the structure of the atom, including why these results led to the nuclear model replacing the plum pudding model.
Question 18 [5 marks]
Energy Changes
A student burns 0.60 g of ethanol and uses the heat released to warm 100 g of water from 20.0 deg C to 44.4 deg C.
Use the equation Q = m c (delta T), where the specific heat capacity of water, c, is 4.2 J/g deg C, to calculate the energy transferred to the water in joules, then calculate the energy released per gram of ethanol burned.
Question 19 [5 marks]
Amount of Substance and the Mole
Calcium carbonate reacts with excess dilute hydrochloric acid: CaCO3 + 2HCl -> CaCl2 + H2O + CO2.
2.50 g of calcium carbonate reacts completely with excess acid.
Calculate the volume of carbon dioxide gas produced at room temperature and pressure (RTP). (Ar: Ca = 40, C = 12, O = 16. The molar volume of a gas at RTP is 24 dm3/mol.)
Question 20 [5 marks]
Acids, Bases and Salts
A student wants to prepare a pure, dry sample of copper sulfate crystals from copper(II) oxide and dilute sulfuric acid.
Describe the method the student should use, including how excess copper oxide is removed and how the pure solid crystals are finally obtained.
Question 21 [5 marks]
Reactivity and Electrolysis
Dilute sulfuric acid is electrolysed using inert (platinum) electrodes.
Name the gas produced at each electrode, and explain, in terms of ion discharge, why these gases form rather than any other ion present.
State the ratio of the volumes of gas produced at the cathode and the anode.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| sodium chloride as a product, identified as the salt | B1 |
| water as the other product; the full word equation is hydrochloric acid + sodium hydroxide -> sodium chloride + water | B1 |
| Final answer: Hydrochloric acid + sodium hydroxide -> sodium chloride + water; the salt is sodium chloride | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| converting 500 cm3 to 0.5 dm3 | M1 |
| concentration = mass / volume | M1 |
| 16 g/dm3 | A1 |
| Final answer: 500 cm3 = 0.500 dm3; concentration = mass/volume = 8/0.500 = 16 g/dm3. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| lead formed at the cathode | B1 |
| bromine formed at the anode | B1 |
| the ions must be free to move so that they can carry the charge/move to the electrodes | B1 |
| Final answer: Lead at the cathode, bromine at the anode; the ions must be free to move to carry the current. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| octane molecules are much larger than methane molecules | B1 |
| larger molecules have stronger intermolecular forces between them than smaller molecules | B1 |
| stronger intermolecular forces require more energy to overcome | B1 |
| Final answer: Both are simple molecular substances held together by weak intermolecular forces, but octane's larger molecules have stronger intermolecular forces than methane's, needing more energy to overcome, so octane has a higher boiling point. | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| Activation energy is the energy difference from reactants to the profile peak | B1 |
| It is the minimum energy particles need for a successful reaction | B1 |
| the energy difference between reactants and products being supplied from the surroundings by energy conservation; accept a correct comparison of energy absorbed breaking bonds and energy released forming bonds | B1 |
| Final answer: Activation energy is the energy difference from reactants to the profile peak; It is the minimum energy particles need for a successful reaction; More energy is absorbed breaking reactant bonds than is released forming product bonds, so the shortfall is taken from the surroundings. Alternatively, the energy difference between reactants and products is supplied from the surroundings by energy conservation. | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| more occupied electron shells down Group 7 | B1 |
| the incoming electron is further from the nucleus | B1 |
| more inner electron shells increase shielding | B1 |
| the nucleus attracts an incoming electron less strongly | B1 |
| gaining an electron is therefore harder, decreasing reactivity | B1 |
| Final answer: Down Group 7 there are more occupied shells, so an incoming electron is further from the nucleus and more shielded by inner shells. Nuclear attraction is weaker and gaining an electron is harder, so reactivity decreases. Fluorine therefore gains an electron more readily than chlorine. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| solid sodium chloride has ions held in fixed positions in its lattice | B1 |
| those ions cannot move to transport charge through the solid | B1 |
| melting disrupts the lattice so ions can move and transport charge through the liquid | B1 |
| Final answer: Solid sodium chloride has ions held in fixed lattice positions, so they cannot move to transport charge. Melting disrupts the lattice, freeing ions to move and carry charge through the liquid. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| moles of Fe = 11.2 / 56 = 0.2 mol | M1 |
| moles of FeS = moles of Fe (1:1 ratio) | M1 |
| mass = moles x Mr of FeS (88) | M1 |
| 17.6 g | A1 |
| Final answer: n(Fe) = 11.2/56 = 0.20 mol. The 1:1 ratio gives 0.20 mol FeS. Mr(FeS) = 56 + 32 = 88; mass = n x Mr = 0.20 x 88 = 17.6 g. | |
| Question 9[4 marks] | |
|---|---|
| Answer or working | Marks |
| fizzing/bubbling observed (effervescence) | B1 |
| the magnesium carbonate gradually disappears/dissolves | B1 |
| the gas produced is carbon dioxide | B1 |
| the gas turns limewater cloudy/milky, confirming carbon dioxide | B1 |
| Final answer: Fizzing occurs as the solid dissolves; carbon dioxide gas is produced, which turns limewater cloudy. | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| a pure metal consists of atoms of the same size, arranged in regular layers | B1 |
| these regular layers can slide over each other relatively easily, making the pure metal soft | B1 |
| an alloy contains atoms of a different size mixed in, for example tin atoms among copper atoms | B1 |
| the different-sized atoms distort the regular layers, making it harder for the layers to slide over each other, so the alloy is harder | B1 |
| Final answer: A pure metal's same-sized atoms sit in regular layers that slide easily; an alloy's mixed atom sizes distort these layers, making them harder to slide over each other, so the alloy is harder. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| Fuel A: Q = 100 x 4.2 x (36.0 - 20.0) = 6720 J | M1 |
| Fuel A: 6720 / 0.40 = 16800 J/g | A1 |
| Fuel B: Q = 100 x 4.2 x (44.0 - 20.0) = 10080 J | M1 |
| Fuel B: 10080 / 0.50 = 20160 J/g | A1 |
| Fuel B releases more energy per gram; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriate | B1 |
| Final answer: Fuel A: Q = 100 x 4.2 x (36.0 - 20.0) = 6720 J; Fuel A: 6720 / 0.40 = 16800 J/g; Fuel B: Q = 100 x 4.2 x (44.0 - 20.0) = 10080 J; Fuel B: 10080 / 0.50 = 20160 J/g; Fuel B releases more energy per gram. | |
| Question 12[3 marks] | |
|---|---|
| Answer or working | Marks |
| there are only weak intermolecular forces between the poly(ethene) chains | B1 |
| diamond is a continuous 3-dimensional network of strong covalent bonds throughout the whole structure | B1 |
| melting diamond requires breaking many strong covalent bonds, needing far more energy than overcoming weak intermolecular forces | B1 |
| Final answer: Poly(ethene) chains are held together only by weak intermolecular forces, which need little energy to overcome, while diamond is one giant network of strong covalent bonds throughout, needing much more energy to break. | |
| Question 13[2 marks] | |
|---|---|
| Answer or working | Marks |
| atom economy = 56 / 100 x 100 (accept 56 / (56 + 44) x 100) | M1 |
| 56.0% to 1 decimal place | A1 |
| Final answer: Atom economy = 56 / (56 + 44) x 100 = 56.0%. | |
| Question 14[3 marks] | |
|---|---|
| Answer or working | Marks |
| Delta H = forward activation energy - reverse activation energy | M1 |
| 80 - 45 = +35 kJ/mol | A1 |
| Endothermic; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriate | B1 |
| Final answer: Delta H = forward activation energy - reverse activation energy; 80 - 45 = +35 kJ/mol; Endothermic. | |
| Question 15[4 marks] | |
|---|---|
| Answer or working | Marks |
| anode half equation: 2Br- -> Br2 + 2e- (accept a correctly balanced positive multiple with equivalent ionic-charge notation) | B1 |
| cathode half equation: Pb2+ + 2e- -> Pb (accept a correctly balanced positive multiple with equivalent ionic-charge notation) | B1 |
| the anode reaction (loss of electrons) is oxidation | B1 |
| the cathode reaction (gain of electrons) is reduction | B1 |
| Final answer: Anode: 2Br- -> Br2 + 2e- (oxidation); Cathode: Pb2+ + 2e- -> Pb (reduction) | |
| Question 16[4 marks] | |
|---|---|
| Answer or working | Marks |
| a rise of one pH unit means a tenfold decrease in H+ concentration | B1 |
| a rise of two units means H+ concentration becomes 1/100 of its original value | B1 |
| adding water increases solution volume without adding acid | B1 |
| this lowers H+ concentration and therefore raises pH | B1 |
| Final answer: A rise of one pH unit means a tenfold decrease in H+ concentration. From pH 1 to pH 3 it becomes 1/100 of the original value. Adding water increases volume without adding acid, reducing H+ concentration and raising pH towards neutral. | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| most alpha particles passed straight through the gold foil | B1 |
| this showed that most of the atom is empty space | B1 |
| a small number of alpha particles were deflected by a large angle or bounced back | B1 |
| this showed that the nucleus is charged (positive) and dense/concentrated | B1 |
| explaining that diffuse positive charge in the plum pudding model could not explain the large deflections | B1 |
| Final answer: Most alpha particles passed through, showing mostly empty space; rare large deflections revealed a tiny, dense, positively charged nucleus. Diffuse positive charge in the plum pudding model could not explain these large deflections. | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| temperature rise = 44.4 - 20.0 = 24.4 deg C | M1 |
| Q = 100 x 4.2 x 24.4 | M1 |
| 10248 J; accept sensible rounding such as 1.0 x 10^4 J | A1 |
| energy per gram = Q / 0.60 | M1 |
| 17080 J/g; accept 17.1 kJ/g or sensible rounding such as 1.7 x 10^4 J/g, with error carried forward from Q; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriate | A1 |
| Final answer: Temperature rise = 44.4 - 20.0 = 24.4 deg C; Q = 100 x 4.2 x 24.4 = 10248 J; Energy per gram = 10248 / 0.60 = 17080 J/g (about 1.7 x 10^4 J/g). | |
| Question 19[5 marks] | |
|---|---|
| Answer or working | Marks |
| Mr of CaCO3 = 40 + 12 + (3 x 16) = 100 | M1 |
| moles of CaCO3 = 2.50 / 100 = 0.025 mol | M1 |
| moles of CO2 = moles of CaCO3 (1:1 ratio) | M1 |
| 0.025 x 24 | M1 |
| 0.6 dm3 (600 cm3) | A1 |
| Final answer: Mr(CaCO3) = 40 + 12 + 3 x 16 = 100; n(CaCO3) = 2.50/100 = 0.025 mol. The 1:1 ratio gives 0.025 mol CO2. Volume = n x 24 = 0.025 x 24 = 0.6 dm3 (600 cm3). | |
| Question 20[5 marks] | |
|---|---|
| Answer or working | Marks |
| warming dilute sulfuric acid and adding copper oxide with stirring until in excess/no more dissolves | B1 |
| filtering off excess copper oxide and retaining the filtrate | B1 |
| gently evaporating some water to concentrate the filtrate to saturation | B1 |
| cooling the concentrated solution to crystallise | B1 |
| filtering the crystals and drying them (accept a small cold distilled-water rinse before drying) | B1 |
| Final answer: Warm the acid and add excess copper oxide, stirring, so all the acid reacts; filter off the unreacted excess oxide; gently evaporate the blue filtrate to make a saturated solution, then leave it to cool and crystallise, and filter and dry the crystals produced. | |
| Question 21[5 marks] | |
|---|---|
| Answer or working | Marks |
| hydrogen at the cathode | B1 |
| oxygen at the anode | B1 |
| H+ ions gain electrons at the cathode to form hydrogen (accept reduction of water) | B1 |
| water/OH- is oxidised to oxygen at the anode rather than sulfate ions being discharged | B1 |
| cathode:anode gas volume ratio = 2:1 (hydrogen:oxygen) | B1 |
| Final answer: Hydrogen forms at the cathode by reduction: 2H+ + 2e- -> H2. Oxygen forms at the anode by oxidation of water, 2H2O -> O2 + 4H+ + 4e-, rather than discharge of sulfate ions. Equivalently, 4OH- -> O2 + 2H2O + 4e-. The hydrogen:oxygen gas volume ratio is 2:1. | |