Revision Library
Choose a subject
Menu
Chemistry
Foundation Tier - Year 11

Year 11 Paper 1: Core Chemistry Review

Covers atomic structure and the periodic table, amount of substance and the mole, concentration, yield and atom economy, acids, bases and salts, rates of reaction and equilibrium, and energy changes.

13 questions - 40 marks - calculator allowed

Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.

Download PDF

Open GCSE Chemistry workspace

Questions

Question 1 [2 marks]

Rates of Reaction and Equilibrium

A student reacts marble chips with dilute hydrochloric acid.

State what would happen to the rate of reaction if the marble chips were crushed into a powder before reacting, and give a reason in terms of surface area.

Question 2 [2 marks]

Energy Changes

Dissolving ammonium nitrate in water causes the temperature of the water to decrease.

State whether this process is exothermic or endothermic, and give one everyday use of this type of reaction.

Question 3 [2 marks]

Concentration, Yield and Atom Economy

A student obtains 18 g of product from a reaction. The percentage yield of the reaction is 90%.

Calculate the theoretical yield of the reaction.

Question 4 [3 marks]

Acids, Bases and Salts

Zinc reacts with dilute sulfuric acid.

Write a word equation for this reaction, name the salt formed, and describe one observation you would make as the reaction proceeds.

Question 5 [3 marks]

Atomic Structure and the Periodic Table

An atom of silicon has atomic number 14 and mass number 28.

State the number of protons, and calculate the number of neutrons in this atom.

Question 6 [3 marks]

Energy Changes

A student mixes two solutions in a polystyrene cup.

The initial temperature is 19.5 deg C. After mixing, the highest temperature reached is 27.0 deg C.

Calculate the temperature change and state whether the reaction is exothermic or endothermic.

Question 7 [4 marks]

Amount of Substance and the Mole

Calculate the relative formula mass (Mr) of potassium chloride, KCl. (Ar: K = 39, Cl = 35.5)

Then calculate the mass of 2.0 mol of potassium chloride.

Question 8 [4 marks]

Concentration, Yield and Atom Economy

Solution A is sodium hydroxide with a concentration of 2.0 g/dm3.

Solution B is sodium hydroxide with a concentration of 0.040 mol/dm3.

Calculate the concentration of solution B in g/dm3, and state which solution, A or B, has the higher concentration. (Ar: Na = 23, O = 16, H = 1)

Question 9 [3 marks]

Rates of Reaction and Equilibrium

Increasing the temperature of a reaction increases the rate of reaction.

Use collision theory to explain why increasing temperature increases the rate of reaction.

Question 10 [3 marks]

Concentration, Yield and Atom Economy

A solution of sodium chloride has a concentration of 40 g/dm3.

Calculate the volume of this solution, in cm3, that contains 6 g of sodium chloride.

Question 11 [3 marks]

Amount of Substance and the Mole

Calculate the mass of 0.30 mol of calcium carbonate, CaCO3. (Ar: Ca = 40, C = 12, O = 16)

Question 12 [3 marks]

Rates of Reaction and Equilibrium

In an experiment, the volume of gas collected is 12 cm3 after 10 seconds and 36 cm3 after 30 seconds.

Calculate the mean rate of reaction between 10 and 30 seconds, in cm3 per second.

Question 13 [5 marks]

Energy Changes

Two fuels, A and B, are each burned to heat 100 g of water from 20.0 deg C, using Q = m c (delta T) with c = 4.2 J/g deg C.

Burning 0.40 g of fuel A raises the water temperature to 36.0 deg C. Burning 0.50 g of fuel B raises the water temperature to 44.0 deg C.

Calculate the energy released per gram for each fuel, and state which fuel releases more energy per gram.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
The rate increasesB1
Powder has a larger exposed surface area for the same massB1
Final answer: The rate increases; Powder has a larger exposed surface area for the same mass.
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
EndothermicB1
a valid everyday use of an endothermic process, such as instant cold packs for sports injuries or self-cooling drinksB1
Final answer: Endothermic; Instant cold packs for sports injuries.
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
theoretical yield = actual yield / (percentage yield / 100)M1
20 gA1
Final answer: Theoretical yield = actual yield/(percentage yield/100) = 18/0.90 = 20 g.
Mark scheme for Question 4 [3 marks]
Question 4[3 marks]
Answer or workingMarks
zinc sulfate as a product, identified as the saltB1
hydrogen as the other product in zinc + sulfuric acid -> zinc sulfate + hydrogenB1
one observation: bubbling/fizzing, zinc dissolving/getting smaller, or warmingB1
Final answer: Zinc + sulfuric acid -> zinc sulfate + hydrogen; the salt is zinc sulfate; bubbling is seen as the zinc reacts and gradually disappears.
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
14 protonsB1
neutrons = mass number - atomic numberM1
14 neutronsA1
Final answer: 14 protons; neutrons = mass number - atomic number = 28 - 14 = 14.
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
27.0 - 19.5M1
a 7.5 deg C increaseA1
exothermic; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateB1
Final answer: 27.0 - 19.5 = 7.5 deg C; Exothermic.
Mark scheme for Question 7 [4 marks]
Question 7[4 marks]
Answer or workingMarks
39 + 35.5M1
Mr = 74.5A1
mass = moles x MrM1
149 gA1
Final answer: Mr(KCl) = 39 + 35.5 = 74.5; mass = n x Mr = 2.0 x 74.5 = 149 g.
Mark scheme for Question 8 [4 marks]
Question 8[4 marks]
Answer or workingMarks
Mr of NaOH = 23 + 16 + 1 = 40M1
0.040 x 40M1
1.6 g/dm3A1
solution A (2.0 g/dm3) has the higher concentrationB1
Final answer: Mr(NaOH) = 23 + 16 + 1 = 40. Solution B has concentration 0.040 x 40 = 1.6 g/dm3. Solution A, at 2.0 g/dm3, is more concentrated.
Mark scheme for Question 9 [3 marks]
Question 9[3 marks]
Answer or workingMarks
particles having more kinetic energy and moving fasterB1
more frequent collisionsB1
a greater proportion of collisions having enough energy to overcome the activation energy, increasing the proportion that are successfulB1
Final answer: Particles have greater kinetic energy; Particles collide more frequently; A greater fraction of collisions have energy at least the activation energy; There are more successful collisions per second.
Mark scheme for Question 10 [3 marks]
Question 10[3 marks]
Answer or workingMarks
6 / 40M1
0.15 dm3A1
converting 0.15 dm3 to 150 cm3B1
Final answer: Volume = mass/concentration = 6/40 = 0.15 dm3. Multiplying by 1000 gives 150 cm3.
Mark scheme for Question 11 [3 marks]
Question 11[3 marks]
Answer or workingMarks
Mr of CaCO3 = 40 + 12 + (3 x 16) = 100M1
0.30 x 100M1
30 gA1
Final answer: Mr(CaCO3) = 40 + 12 + 3 x 16 = 100; mass = n x Mr = 0.30 x 100 = 30 g.
Mark scheme for Question 12 [3 marks]
Question 12[3 marks]
Answer or workingMarks
Volume increase = 36 - 12 = 24 cm3M1
Time interval = 30 - 10 = 20 sM1
Mean rate = 24 / 20 = 1.2 cm3/s; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateA1
Final answer: Volume increase = 36 - 12 = 24 cm3; Time interval = 30 - 10 = 20 s; Mean rate = 24 / 20 = 1.2 cm3/s.
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
Fuel A: Q = 100 x 4.2 x (36.0 - 20.0) = 6720 JM1
Fuel A: 6720 / 0.40 = 16800 J/gA1
Fuel B: Q = 100 x 4.2 x (44.0 - 20.0) = 10080 JM1
Fuel B: 10080 / 0.50 = 20160 J/gA1
Fuel B releases more energy per gram; accept equivalent valid working and units, sensible rounding consistent with any requested precision, and error carried forward where appropriateB1
Final answer: Fuel A: Q = 100 x 4.2 x (36.0 - 20.0) = 6720 J; Fuel A: 6720 / 0.40 = 16800 J/g; Fuel B: Q = 100 x 4.2 x (44.0 - 20.0) = 10080 J; Fuel B: 10080 / 0.50 = 20160 J/g; Fuel B releases more energy per gram.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.