GCSE Physics Foundation Short Paper A
Covers Energy Stores, Transfers and Conservation, Energy Resources and Efficiency, Electrical Circuits and Components and 3 more.
Questions
Question 1 [2 marks]
Electrical Circuits and Components
A student wants to measure the current through a component and the potential difference across it.
State where an ammeter should be connected to measure the current through the component, and state where a voltmeter should be connected to measure the potential difference across it.
Question 2 [2 marks]
Atomic Structure and Radioactivity
An atom of sodium has an atomic number of 11 and a mass number of 23.
State the number of protons and the number of neutrons in an atom of this sodium isotope.
Question 3 [2 marks]
Energy Stores, Transfers and Conservation
A stone is thrown vertically upwards. It rises to its highest point and then falls back down to the height it was thrown from. Ignore air resistance.
State the energy store the stone's kinetic energy is transferred to as it rises, and state the energy store this is transferred back to as the stone falls.
Question 4 [3 marks]
Particle Model of Matter
A metal block has a mass of 540 g and a volume of 60 cm^3.
Calculate the density of the metal. Give the units of your answer.
Question 5 [3 marks]
Energy Resources and Efficiency
A newspaper article claims that renewable energy resources are the only energy resources that cause any environmental damage.
Evaluate this claim by giving three disadvantages of continuing to rely on fossil fuels for electricity generation.
Question 6 [4 marks]
Domestic Electricity and Power
A three-pin plug used in the UK contains a live wire, a neutral wire and an earth wire.
State the approximate potential difference between the live wire and earth, and describe the function of the earth wire in terms of electrical safety.
Question 7 [4 marks]
Energy Stores, Transfers and Conservation
An archer transfers 100 J of elastic potential energy from a stretched bow to an arrow of mass 0.08 kg. Only 72% of this energy is usefully transferred to the kinetic energy store of the arrow as it is released; the rest is dissipated as sound and vibrations in the bow.
Calculate the useful kinetic energy transferred to the arrow, and hence calculate the arrow's speed as it leaves the bow.
Question 8 [5 marks]
Electrical Circuits and Components
A 6 V battery is connected to a heater rated at 18 W at 6 V.
Calculate the current through the heater, and then calculate the resistance of the heater at this operating point.
Question 9 [5 marks]
Domestic Electricity and Power
Electricity costs 28p per kWh. An electric oven draws a constant electrical input power of 2.5 kW and is used for 45 minutes.
Calculate the energy transferred by the oven in kWh, and the cost of using the oven for this time.
Question 10 [5 marks]
Particle Model of Matter
0.4 kg of ethanol at its boiling point of 78 deg C is heated until it has all turned to vapour, still at 78 deg C. The specific latent heat of vaporisation of ethanol is 850,000 J/kg.
Calculate the energy needed to boil away all the ethanol, and explain why the temperature does not increase during this process even though energy is being transferred.
Question 11 [5 marks]
Atomic Structure and Radioactivity
A sample of a radioactive isotope has a half-life of 4 hours. Initially there is 80 g of the isotope present.
Calculate the mass of the isotope remaining after 3 half-lives, and state how long this takes. State what is meant by half-life.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| the ammeter being connected in series with the component | B1 |
| the voltmeter being connected in parallel across the component, across its two terminals | B1 |
| Final answer: An ammeter is connected in series with the component; a voltmeter is connected in parallel across it. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| 11 protons, equal to the atomic number | B1 |
| 12 neutrons, since 23 - 11 = 12 | B1 |
| Final answer: 11 protons and 12 neutrons | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| the gravitational potential energy store, as the stone rises | B1 |
| the gravitational potential energy store being transferred back to the kinetic energy store as the stone falls | B1 |
| Final answer: Kinetic energy is transferred to the gravitational potential energy store as the stone rises, and back to the kinetic energy store as it falls. | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| density = mass / volume | M1 |
| substituting 540 / 60 | M1 |
| density = 9 g/cm^3 | A1 |
| Final answer: 9 g/cm^3 | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| one valid disadvantage, such as carbon dioxide contributing to climate change, sulfur dioxide causing acid rain, harmful particulates, habitat damage during extraction, oil spills or finite fuel resources | B1 |
| a second distinct valid disadvantage; accept another relevant explained example | B1 |
| a third distinct valid disadvantage; do not count one consequence twice | B1 |
| Final answer: Any three of: releases carbon dioxide, contributing to global warming; releases sulfur dioxide, causing acid rain; extraction damages habitats or risks oil spills. | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| the potential difference between the live wire and earth being about 230 V | B1 |
| stating the earth wire is a safety wire connected to the case (or metal parts) of an appliance | B1 |
| explaining that if a fault occurs and the live wire touches the case, a large current flows to earth through the earth wire rather than through a person touching the case | B1 |
| stating this large current blows the fuse (or trips the circuit breaker), disconnecting the live wire and cutting off the electricity supply to the appliance, protecting the user from electric shock | B1 |
| Final answer: Live is about 230 V relative to earth. The earth wire connects the metal case to earth by a low-resistance path. If live touches the case, a large fault current flows along this path, causing the fuse to blow or circuit breaker to trip and disconnect live, reducing the risk of electric shock. | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| useful kinetic energy = 0.72 x 100 | M1 |
| useful kinetic energy = 72 J | A1 |
| rearranging KE = 1/2 m v^2 to give v = sqrt(2 x 72 / 0.08) | M1 |
| v = 42.4 m/s; accept 42 m/s to 2 significant figures or a correctly rounded answer to more significant figures | A1 |
| Final answer: Useful kinetic energy = 72 J; speed = sqrt(2 x 72 / 0.08) = 42.4 m/s (42 m/s to 2 significant figures). | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| current = power / potential difference | M1 |
| substituting 18 / 6 | M1 |
| current = 3 A | A1 |
| resistance = potential difference / current, using their current | M1 |
| resistance = 6 / 3 = 2 ohm | A1 |
| Final answer: Current = 3 A; resistance = 2 ohm. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| time = 45 / 60 (= 0.75 hours) | M1 |
| energy transferred = power x time = 2.5 x 0.75 | M1 |
| energy transferred = 1.875 kWh | A1 |
| cost = energy transferred x cost per kWh = 1.875 x 28 | M1 |
| cost = 52.5 p (about 53p) | A1 |
| Final answer: Energy transferred = 1.875 kWh; cost = 52.5p (about 53p). | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| energy = mass x specific latent heat of vaporisation | M1 |
| substituting 0.4 x 850000 | M1 |
| energy = 340000 J (340 kJ) | A1 |
| explaining energy increases particle potential energy by overcoming attractive forces and increasing separation | B1 |
| explaining average particle kinetic energy does not increase, so temperature remains constant | B1 |
| Final answer: 340000 J (340 kJ); the temperature stays constant because the energy is used to overcome forces of attraction between particles (increasing their separation) rather than to increase their kinetic energy, though the internal energy still increases. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| after each half-life the mass halves: 80, then 40, then 20, then 10 | M1 |
| mass remaining after 3 half-lives = 10 g | A1 |
| time = number of half-lives x half-life = 3 x 4 | M1 |
| time = 12 hours | A1 |
| stating half-life is the time taken for the number of undecayed parent nuclei, mass of the parent isotope remaining, or activity to halve; accept background-corrected count rate halving with unchanged detector conditions | B1 |
| Final answer: 10 g remains after 3 half-lives, which takes 12 hours. Half-life is the time taken for the number of undecayed parent nuclei, or their activity, to halve. | |