Revision Library
Choose a subject
Menu
Higher Tier - Grades 4-9

GCSE Physics Higher Paper 2

Covers Energy Stores, Transfers and Conservation, Energy Resources and Efficiency, Electrical Circuits and Components and 9 more.

12 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Physics workspace

Questions

Question 1 [3 marks]

Magnetism and Electromagnetism

A straight wire carrying a current of 3 A is placed at right angles to a uniform magnetic field of flux density 0.4 T. The length of wire in the field is 0.25 m.

Calculate the force on the wire due to the magnetic field.

Question 2 [5 marks]

Momentum and Forces in Action

A car of mass 1000 kg travelling at 12 m/s collides with a second car of mass 500 kg travelling at 6 m/s in the same direction. After the collision, the two cars move together with a common velocity.

Calculate the total momentum before the collision, and the common velocity of the two cars after the collision.

Question 3 [5 marks]

Particle Model of Matter

0.4 kg of ethanol at its boiling point of 78 deg C is heated until it has all turned to vapour, still at 78 deg C. The specific latent heat of vaporisation of ethanol is 850,000 J/kg.

Calculate the energy needed to boil away all the ethanol, and explain why the temperature does not increase during this process even though energy is being transferred.

Question 4 [5 marks]

Moments, Elasticity and Pressure

A spring has a spring constant of 50 N/m. A force of 7 N is applied to the spring, which stays within its limit of proportionality.

Calculate the extension of the spring, and state the length of the spring if its natural, unstretched length was 22 cm.

Question 5 [5 marks]

Energy Resources and Efficiency

A solar panel has a maximum power output of 300 W in bright sunlight. On a particular day it operates at this maximum output for 5 hours, but produces no useful output for the remaining 19 hours because it is dark or cloudy.

Calculate the total energy transferred by the solar panel that day. Then calculate the energy a resource with a steady, reliable output of 300 W would transfer over the same 24 hours, and state what this comparison shows about intermittent resources such as solar power.

Question 6 [5 marks]

Wave Properties and Behaviour

A water wave travels from deep water, where its speed is 2.4 m/s and its wavelength is 0.6 m, into a region of shallower water where its speed decreases to 1.6 m/s. The frequency of the wave does not change as it crosses the boundary.

Calculate the frequency of the wave, and its wavelength in the shallower water.

Question 7 [2 marks]

Space Physics

Some observations of distant supernovae suggest that the rate at which the universe is expanding may be increasing (accelerating) over time, rather than staying constant or slowing down.

Explain why this observation was unexpected, given that gravity acts to pull matter together, and describe what name scientists have given to the unknown cause of this apparent acceleration.

Question 8 [6 marks]

Domestic Electricity and Power

Some UK homes have a residual current device (RCD) fitted in addition to fuses in the consumer unit (fuse box).

Explain how an RCD works to protect a person from an electric shock, and explain one advantage an RCD has over a fuse in this situation.

Question 9 [6 marks]

Forces, Motion and Newton's Laws

A motorbike of mass 220 kg is travelling at 30 m/s when the rider sees a hazard and applies the brakes. The motorbike decelerates uniformly and comes to rest after travelling 75 m.

Calculate the braking force needed to stop the motorbike in this distance.

Question 10 [6 marks]

Electrical Circuits and Components

A 20 ohm resistor is connected in series with a parallel combination of a 30 ohm resistor and a 60 ohm resistor. The circuit is connected to a 10 V battery.

Calculate the combined resistance of the parallel section, the total resistance of the circuit, the total current supplied by the battery, and the potential difference across the parallel section.

Question 11 [6 marks]

Energy Stores, Transfers and Conservation

A skateboarder of mass 55 kg starts from rest at the top of a ramp 2.2 m high. She reaches the bottom of the ramp with a speed of 5.8 m/s. Gravitational field strength g = 9.8 N/kg.

Calculate the gravitational potential energy she has at the top of the ramp, the kinetic energy she has at the bottom, and hence the energy dissipated by friction and air resistance as she travels down the ramp.

Question 12 [6 marks]

Atomic Structure and Radioactivity

Radium-226 (atomic number 88) decays by alpha emission to form an isotope of radon (Rn).

Determine the mass number and atomic number of the radon nucleus produced, explaining each change, and write a word equation for this decay. Then calculate the number of neutrons in the radon nucleus formed.

Model solutions

Mark scheme for Question 1 [3 marks]
Question 1[3 marks]
Answer or workingMarks
force = magnetic flux density x current x lengthM1
substituting 0.4 x 3 x 0.25M1
force = 0.3 NA1
Final answer: 0.3 N
Mark scheme for Question 2 [5 marks]
Question 2[5 marks]
Answer or workingMarks
total momentum before = (1000 x 12) + (500 x 6)M1
total momentum before = 15000 kg m/sA1
using conservation of momentum, common velocity = total momentum / total massM1
substituting 15000 / (1000 + 500)M1
common velocity = 10 m/sA1
Final answer: Total momentum before = 15000 kg m/s; common velocity after the collision = 10 m/s.
Mark scheme for Question 3 [5 marks]
Question 3[5 marks]
Answer or workingMarks
energy = mass x specific latent heat of vaporisationM1
substituting 0.4 x 850000M1
energy = 340000 J (340 kJ)A1
explaining energy increases particle potential energy by overcoming attractive forces and increasing separationB1
explaining average particle kinetic energy does not increase, so temperature remains constantB1
Final answer: 340000 J (340 kJ); the temperature stays constant because the energy is used to overcome forces of attraction between particles (increasing their separation) rather than to increase their kinetic energy, though the internal energy still increases.
Mark scheme for Question 4 [5 marks]
Question 4[5 marks]
Answer or workingMarks
extension = force / spring constantM1
substituting 7 / 50M1
extension = 0.14 m (14 cm)A1
new length = natural length + extension = 22 + 14M1
new length = 36 cmA1
Final answer: Extension = 0.14 m (14 cm); new length = 36 cm.
Mark scheme for Question 5 [5 marks]
Question 5[5 marks]
Answer or workingMarks
energy transferred by the solar panel = power x time = 300 x 5M1
solar energy = 1500 Wh (1.5 kWh); accept 5.4 x 10^6 J or equivalent unitsA1
energy a steady 300 W resource would transfer in 24 hours = 300 x 24M1
steady resource energy = 7200 Wh (7.2 kWh); accept 2.592 x 10^7 J or equivalent unitsA1
interpreting the comparison: intermittent output gives less energy over the day than continuous operation at the same maximum power; a numerical shortfall is acceptable but not requiredB1
Final answer: Solar panel output = 1.5 kWh; a steady 300 W output over 24 hours would give 7.2 kWh, 5.7 kWh more, illustrating the unreliability of an intermittent resource like solar power.
Mark scheme for Question 6 [5 marks]
Question 6[5 marks]
Answer or workingMarks
frequency = wave speed / wavelength, using the deep water valuesM1
substituting 2.4 / 0.6M1
frequency = 4 HzA1
new wavelength = wave speed / frequency, using the shallow water speed and the unchanged frequency = 1.6 / 4M1
new wavelength = 0.4 mA1
Final answer: Frequency = 4 Hz (unchanged); wavelength in the shallower water = 0.4 m.
Mark scheme for Question 7 [2 marks]
Question 7[2 marks]
Answer or workingMarks
explaining that attractive gravity between matter was expected to slow expansion, making acceleration unexpectedB1
naming the unknown cause of accelerated expansion 'dark energy'B1
Final answer: Gravity between matter was expected to slow the expansion. Accelerating expansion was therefore unexpected; the unknown cause is called 'dark energy'.
Mark scheme for Question 8 [6 marks]
Question 8[6 marks]
Answer or workingMarks
stating an RCD continuously monitors (compares) the current flowing into a circuit through the live wire and the current flowing back out through the neutral wireB1
stating that in normal use, these two currents should be equalB1
stating that if a person receives an electric shock, some current flows to earth through their body instead of back through the neutral wire, so the two currents become unequalB1
stating the RCD detects this difference and rapidly (almost instantly, within milliseconds) disconnects the circuitB1
an advantage: an RCD detects small earth-leakage currents, far below the current needed to blow the circuit fuseB1
explaining this allows the supply to be disconnected during an earth-leakage shock even when the fuse would remain intact; award for this one explained advantageB1
Final answer: An RCD compares live and neutral currents, which are equal in normal use. Leakage to earth, for example through a person, makes them unequal. When the imbalance exceeds its threshold, the RCD rapidly disconnects the circuit, limiting shock duration. It detects small leakage currents below those needed to blow a fuse, so it can disconnect during an earth-leakage shock while the fuse would remain intact.
Mark scheme for Question 9 [6 marks]
Question 9[6 marks]
Answer or workingMarks
using v^2 = u^2 + 2 a s with v = 0, u = 30, s = 75M1
rearranging to a = -(u^2) / (2s) = -(30^2) / (2 x 75)M1
deceleration = 6 m/s^2 (accept -6 m/s^2)A1
force = mass x accelerationM1
braking force = 220 x 6 = 1320 NA1
stating this is the force needed from the brakes, acting against the direction of travel, to bring the motorbike to rest over that distanceB1
Final answer: Braking force = 1320 N opposite to the direction of travel, treating braking as the net longitudinal force.
Mark scheme for Question 10 [6 marks]
Question 10[6 marks]
Answer or workingMarks
combined resistance of the parallel section, using 1/Rp = 1/30 + 1/60M1
parallel resistance = 20 ohmA1
total circuit resistance = 20 (series) + 20 (parallel) = 40 ohmM1
total current = potential difference / total resistance = 10 / 40M1
total current = 0.25 AA1
potential difference across the parallel section = total current x parallel resistance = 0.25 x 20 = 5 V, which could then be used to find each branch currentB1
Final answer: Parallel resistance = 20 ohm; total resistance = 40 ohm; total current = 0.25 A; potential difference across the parallel section = 5 V (giving branch currents of about 0.17 A through the 30 ohm resistor and 0.08 A through the 60 ohm resistor).
Mark scheme for Question 11 [6 marks]
Question 11[6 marks]
Answer or workingMarks
GPE = m g h = 55 x 9.8 x 2.2M1
GPE = 1185.8 J; accept 1200 J to 2 significant figures, or a correctly rounded answer to more significant figures. Retain unrounded intermediate values.A1
KE = 1/2 m v^2 = 0.5 x 55 x 5.8^2M1
KE = 925.1 J; accept 930 J to 2 significant figures, or a correctly rounded answer to more significant figures. Retain unrounded intermediate values.A1
energy dissipated = GPE - KEM1
energy dissipated = 260.7 J; accept 260 J to 2 significant figures, or a correctly rounded answer to more significant figures. Retain unrounded intermediate values.A1
Final answer: GPE = 1185.8 J; KE = 925.1 J; energy dissipated = 260.7 J. To 2 significant figures: 1200 J, 930 J and 260 J respectively, rounding only after calculation.
Mark scheme for Question 12 [6 marks]
Question 12[6 marks]
Answer or workingMarks
mass number of radon = 226 - 4 (the mass number of the alpha particle)M1
mass number of radon = 222A1
atomic number of radon = 88 - 2 (the atomic number of the alpha particle)M1
atomic number of radon = 86A1
the word equation: radium-226 -> radon-222 + alpha particle; accept a balanced nuclide-symbol equationB1
neutrons in the radon nucleus = mass number - atomic number = 222 - 86 = 136B1
Final answer: An alpha particle carries away four nucleons, so mass number = 226 - 4 = 222. It carries away two protons, so atomic number = 88 - 2 = 86. Radium-226 -> radon-222 + alpha particle. Neutrons in radon = 222 - 86 = 136.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.