Revision Library
Choose a subject
Menu
Higher Tier - Grades 4-9

GCSE Physics Higher Paper 3

Covers Energy Stores, Transfers and Conservation, Energy Resources and Efficiency, Electrical Circuits and Components and 9 more.

14 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Physics workspace

Questions

Question 1 [3 marks]

Magnetism and Electromagnetism

A simple electric motor can be made to spin in the opposite direction.

Explain, using Fleming's left-hand rule, how reversing the direction of the current through the coil, or reversing the magnetic field, changes the direction the motor spins. State what happens if both the current and the field are reversed at the same time.

Question 2 [3 marks]

Electrical Circuits and Components

A student investigates how the resistance of a length of wire changes as the length of wire in the circuit increases, keeping the wire's material and cross-sectional area and temperature constant.

Describe how the resistance of the wire changes as its length increases, and explain this relationship in terms of the collisions between charge carriers and the wire's ions.

Question 3 [3 marks]

Forces, Motion and Newton's Laws

A car and a small van collide head-on. The car exerts a force on the van during the collision.

State and explain, using Newton's Third Law, the size and direction of the force the van exerts on the car, and explain why the car and the van usually experience very different accelerations during the collision even though the forces on them are equal.

Question 4 [4 marks]

Particle Model of Matter

A sealed, rigid container holds a fixed mass of gas. The gas is cooled while the volume of the container stays constant.

Use the particle model to explain why the pressure of the gas decreases as its temperature decreases at constant volume.

Question 5 [5 marks]

Energy Stores, Transfers and Conservation

A 2 kg block of copper is initially at 150 deg C and cools down, releasing 30,800 J of energy to the surroundings. The specific heat capacity of copper is 385 J/kg deg C.

Calculate the fall in temperature of the block, and hence calculate its final temperature.

Question 6 [5 marks]

Momentum and Forces in Action

A car of mass 1000 kg travelling at 12 m/s collides with a second car of mass 500 kg travelling at 6 m/s in the same direction. After the collision, the two cars move together with a common velocity.

Calculate the total momentum before the collision, and the common velocity of the two cars after the collision.

Question 7 [5 marks]

Moments, Elasticity and Pressure

A spring has a spring constant of 40 N/m. A force of 6 N is applied to the spring, which stays within its limit of proportionality.

Calculate the extension of the spring, and state the length of the spring if its natural, unstretched length was 18 cm.

Question 8 [2 marks]

Space Physics

Some observations of distant supernovae suggest that the rate at which the universe is expanding may be increasing (accelerating) over time, rather than staying constant or slowing down.

Explain why this observation was unexpected, given that gravity acts to pull matter together, and describe what name scientists have given to the unknown cause of this apparent acceleration.

Question 9 [4 marks]

Electrical Circuits and Components

A student investigates the current against potential difference characteristic of a fixed resistor kept at constant temperature, and compares it with that of a filament lamp.

Describe the current against potential difference graphs for the fixed resistor and the filament lamp. Explain the shape of the filament lamp graph in terms of heating and the movement of particles.

Question 10 [5 marks]

Domestic Electricity and Power

A student compares two appliances in her home: an LED lamp rated at 9 W and an old filament lamp rated at 60 W, which produce a similar amount of useful light output.

Explain, in terms of energy transfers, why the LED lamp is more efficient than the filament lamp, and explain why replacing filament lamps with LED lamps can reduce a household's electricity costs and its impact on the environment, even though LED lamps are usually more expensive to buy.

Question 11 [5 marks]

Energy Resources and Efficiency

A biomass power station burns wood pellets that release 18,000,000 J of chemical energy per kg when burned. The power station burns 2000 kg of pellets every hour and has an efficiency of 35%.

Calculate the useful electrical power output of the power station, in watts.

Question 12 [5 marks]

Wave Properties and Behaviour

A student uses an oscilloscope to display a sound wave picked up by a microphone. The time-base of the oscilloscope is set so that each horizontal division represents 0.002 s. The wave shown completes exactly 4 full cycles across 8 horizontal divisions on the screen.

Calculate the time period of one cycle of the wave, and use this to calculate the frequency of the sound wave.

Question 13 [5 marks]

Space Physics

A satellite orbits the Earth in a stable circular orbit of radius 7.0 x 10^6 m, completing one full orbit every 6000 s.

Calculate the orbital speed of the satellite, using the fact that in one orbit it travels a distance equal to the circumference of its circular orbit, 2 x pi x r. Then explain, in terms of velocity, why the satellite is accelerating even though it moves at a constant speed.

Question 14 [6 marks]

Atomic Structure and Radioactivity

A worker at a nuclear power station may be exposed to radiation both from external sources and from radioactive dust.

Explain why internal contamination can be particularly hazardous compared with irradiation from an external source, especially for alpha-emitting material. Describe two safety measures used at nuclear power stations to reduce contamination risk, and explain how at least one works.

Model solutions

Mark scheme for Question 1 [3 marks]
Question 1[3 marks]
Answer or workingMarks
stating reversing the current through the coil reverses the force direction found by Fleming's left-hand rule on each side of the coil, so the motor spins in the opposite directionB1
stating reversing the magnetic field direction has the same effect, also reversing the force direction and so the direction of spinB1
explaining that reversing both current and field leaves the force directions, and therefore the direction of rotation, unchanged by Fleming's left-hand ruleB1
Final answer: Reversing either the current or the field reverses the direction of spin; reversing both together reverses the force direction twice, so the motor keeps spinning the same way.
Mark scheme for Question 2 [3 marks]
Question 2[3 marks]
Answer or workingMarks
resistance being directly proportional to wire length under the stated conditionsB1
explaining that electrons travelling along a longer wire encounter more ions and undergo more collisions overallB1
explaining that collisions transfer energy from electrons to the lattice, so a greater potential difference is required to maintain the same currentB1
Final answer: Resistance is directly proportional to length. Electrons travel further and undergo more collisions with ions in a longer wire. These collisions transfer energy to the lattice, so a greater potential difference is needed to maintain the same current.
Mark scheme for Question 3 [3 marks]
Question 3[3 marks]
Answer or workingMarks
stating the van's force on the car has the same magnitude as the car's force on the van, by Newton's Third LawB1
stating the two interaction forces act in opposite directions on different vehiclesB1
using a = F/m to explain that unequal masses give unequal acceleration magnitudes, with the lighter vehicle accelerating more for equal force magnitudes; assume other forces are negligible during impactB1
Final answer: The van exerts an equal and opposite force on the car; since acceleration = force / mass, the lighter vehicle undergoes the greater acceleration for the same force.
Mark scheme for Question 4 [4 marks]
Question 4[4 marks]
Answer or workingMarks
stating cooling the gas decreases the average kinetic energy of the gas particles, so on average they move slowerB1
stating the particles collide with the walls of the container less often per secondB1
a smaller average change in particle momentum in each wall collisionB1
linking the rate of momentum transfer to force on the wall, and pressure to force per unit areaB1
Final answer: Cooling decreases average particle kinetic energy. Particles move slower and collide with the walls less often, with a smaller momentum change per collision. The rate of momentum transfer, hence the force on the walls and the pressure (force per unit area), decreases.
Mark scheme for Question 5 [5 marks]
Question 5[5 marks]
Answer or workingMarks
change in temperature = energy transferred / (mass x specific heat capacity)M1
substituting 30800 / (2 x 385)M1
change in temperature = 40 deg CA1
final temperature = 150 - 40M1
final temperature = 110 deg CA1
Final answer: Fall in temperature = 40 deg C; final temperature = 110 deg C.
Mark scheme for Question 6 [5 marks]
Question 6[5 marks]
Answer or workingMarks
total momentum before = (1000 x 12) + (500 x 6)M1
total momentum before = 15000 kg m/sA1
using conservation of momentum, common velocity = total momentum / total massM1
substituting 15000 / (1000 + 500)M1
common velocity = 10 m/sA1
Final answer: Total momentum before = 15000 kg m/s; common velocity after the collision = 10 m/s.
Mark scheme for Question 7 [5 marks]
Question 7[5 marks]
Answer or workingMarks
extension = force / spring constantM1
substituting 6 / 40M1
extension = 0.15 m (15 cm)A1
new length = natural length + extension = 18 + 15M1
new length = 33 cmA1
Final answer: Extension = 0.15 m (15 cm); new length = 33 cm.
Mark scheme for Question 8 [2 marks]
Question 8[2 marks]
Answer or workingMarks
explaining that attractive gravity between matter was expected to slow expansion, making acceleration unexpectedB1
naming the unknown cause of accelerated expansion 'dark energy'B1
Final answer: Gravity between matter was expected to slow the expansion. Accelerating expansion was therefore unexpected; the unknown cause is called 'dark energy'.
Mark scheme for Question 9 [4 marks]
Question 9[4 marks]
Answer or workingMarks
the fixed resistor having a straight I-V line through the originB1
the lamp curve passing through the origin and becoming shallower as the magnitude of potential difference increasesB1
explaining current heats the filamentB1
explaining hotter lattice ions vibrate more strongly, causing more electron scattering and increased resistanceB1
Final answer: The fixed resistor has a straight I-V line through the origin. The lamp curve passes through the origin and becomes shallower as the magnitude of potential difference increases. Current heats the filament; greater lattice vibrations cause more electron scattering and increased resistance.
Mark scheme for Question 10 [5 marks]
Question 10[5 marks]
Answer or workingMarks
explaining the filament lamp wastes much more energy, transferring it to the thermal energy store of the surroundings (it gets much hotter), than the LED lamp for the same light outputB1
stating this means a greater proportion of the LED lamp's input energy transfer is a useful output, so it has a higher efficiencyB1
explaining the LED lamp uses much less power for the same light output, so transfers less energy over time, reducing electricity bills over the lamp's lifetime despite its higher purchase costB1
explaining that using less electrical energy means less energy needs to be generated at power stationsB1
explaining that where this generation involves burning fossil fuels, using less energy reduces the amount of harmful or greenhouse gases released, reducing environmental impactB1
Final answer: For the same useful light output the LED wastes less energy heating the surroundings, so a larger fraction of its electrical input is useful. Lower power for the same usage time means lower energy use and running costs, which can offset the higher purchase price over time. Less electricity needs to be generated; if this displaces fossil-fuel generation, fuel use and emissions fall.
Mark scheme for Question 11 [5 marks]
Question 11[5 marks]
Answer or workingMarks
total chemical energy released per hour = 18000000 x 2000M1
total chemical energy per hour = 3.6 x 10^10 JA1
total power = energy / time, using time = 3600 sM1
useful power = efficiency x total power = 0.35 x (3.6 x 10^10 / 3600)M1
useful electrical power output = 3.5 x 10^6 W (3500 kW)A1
Final answer: 3.5 x 10^6 W (3500 kW)
Mark scheme for Question 12 [5 marks]
Question 12[5 marks]
Answer or workingMarks
total time shown on screen = 8 x 0.002 = 0.016 sM1
time period of one cycle = total time / number of cycles = 0.016 / 4M1
time period = 0.004 sA1
frequency = 1 / time periodM1
frequency = 1 / 0.004 = 250 HzA1
Final answer: Time period = 0.004 s; frequency = 250 Hz
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
substituting 2 x pi x 7.0 x 10^6M1
circumference = 43982297.15... m; accept 4.4 x 10^7 m (2 significant figures) or 4.40 x 10^7 m (3 significant figures)A1
speed = distance / time, using their circumference / 6000M1
speed = 7330.382858... m/s; accept 7.3 x 10^3 m/s (2 significant figures) or 7.33 x 10^3 m/s (3 significant figures)A1
explaining that although the satellite's speed is constant, its direction is continuously changing as it moves around the circular orbit, and since velocity is a vector, this changing direction means the velocity is changing, so the satellite is acceleratingB1
Final answer: Orbital speed is about 7330 m/s; the satellite accelerates because its direction, and therefore velocity, constantly changes even though its speed stays constant.
Mark scheme for Question 14 [6 marks]
Question 14[6 marks]
Answer or workingMarks
stating contamination means radioactive material is on or in the body, continuing to expose the person for as long as it remains thereB1
stating irradiation from an external source, in contrast, stops as soon as the person leaves the source or it is shielded/removedB1
explaining that alpha radiation, although only weakly penetrating from outside the body, is strongly ionising and can do more damage if the emitting material is inside the body, close to living cells, than it could from outsideB1
one suitable measure, such as protective clothing/respirators preventing dust inhalation or deposition, or containment and controlled ventilationB1
a second distinct suitable measure, such as contamination monitoring followed by decontamination before leaving controlled areas; dosimetry alone does not prevent contaminationB1
explaining how at least one measure prevents radioactive material getting onto or into the body, or removes it to limit ongoing exposureB1
Final answer: Contamination leaves radioactive material on or in the body, causing exposure for as long as it remains. External irradiation stops when the source is removed or shielded. Alpha radiation has low penetration externally but is strongly ionising, so an internal alpha emitter close to living cells can cause substantial damage. Protective clothing and respirators limit deposition and inhalation; containment and controlled ventilation limit the spread of radioactive dust. Monitoring followed by decontamination is also valid.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.