Revision Library
Choose a subject
Menu
Higher Tier - Grades 4-9

GCSE Physics Higher Paper 4

Covers Energy Stores, Transfers and Conservation, Energy Resources and Efficiency, Electrical Circuits and Components and 9 more.

13 questions - 60 marks - calculator allowed

Download PDF

Open GCSE Physics workspace

Questions

Question 1 [4 marks]

Energy Resources and Efficiency

An electric drone motor is supplied with 150 W of electrical power. The motor has an efficiency of 68%.

Calculate the useful power output of the motor transferred to the drone's propellers, and the power that is wasted.

Question 2 [4 marks]

Moments, Elasticity and Pressure

A spring with a spring constant of 60 N/m is stretched elastically by 0.2 m.

Calculate the elastic potential energy stored in the spring. Give the units of your answer.

Question 3 [4 marks]

Wave Properties and Behaviour

A ship's sonar system sends a pulse of ultrasound towards the sea bed. The pulse returns to the ship 0.8 s after it was sent. The speed of sound in seawater is 1500 m/s.

Calculate the depth of the sea bed below the ship.

Question 4 [5 marks]

Particle Model of Matter

0.4 kg of ethanol at its boiling point of 78 deg C is heated until it has all turned to vapour, still at 78 deg C. The specific latent heat of vaporisation of ethanol is 850,000 J/kg.

Calculate the energy needed to boil away all the ethanol, and explain why the temperature does not increase during this process even though energy is being transferred.

Question 5 [5 marks]

Momentum and Forces in Action

A car of mass 800 kg travelling at 15 m/s collides with a second car of mass 1200 kg travelling at 5 m/s in the same direction. After the collision, the two cars move together with a common velocity.

Calculate the total momentum before the collision, and the common velocity of the two cars after the collision.

Question 6 [5 marks]

Forces, Motion and Newton's Laws

A van's engine provides a driving force of 4500 N. Friction and air resistance act on the van with a total resistive force of 1200 N in the opposite direction. The van has a mass of 1650 kg.

Calculate the resultant force on the van, and its acceleration.

Question 7 [4 marks]

Domestic Electricity and Power

A student says that a hairdryer, because it has a much higher power rating than a laptop charger, must always use more electrical energy every time each is used.

Explain why this statement is not necessarily true, using energy transferred = power x time. Then describe why devices left on standby, even though individually low power, can add a noticeable amount to a household's total electricity costs over a year.

Question 8 [2 marks]

Space Physics

Some observations of distant supernovae suggest that the rate at which the universe is expanding may be increasing (accelerating) over time, rather than staying constant or slowing down.

Explain why this observation was unexpected, given that gravity acts to pull matter together, and describe what name scientists have given to the unknown cause of this apparent acceleration.

Question 9 [5 marks]

Domestic Electricity and Power

A student compares two appliances in her home: an LED lamp rated at 9 W and an old filament lamp rated at 60 W, which produce a similar amount of useful light output.

Explain, in terms of energy transfers, why the LED lamp is more efficient than the filament lamp, and explain why replacing filament lamps with LED lamps can reduce a household's electricity costs and its impact on the environment, even though LED lamps are usually more expensive to buy.

Question 10 [5 marks]

Electrical Circuits and Components

A negative-temperature-coefficient (NTC) thermistor is connected in series with a fixed 100 ohm resistor and a 6 V battery. At room temperature the thermistor has a resistance of 500 ohm.

Calculate the current in the circuit at room temperature. Then state and explain what happens to this current if the temperature of the thermistor increases.

Question 11 [5 marks]

Magnetism and Electromagnetism

A transformer has 460 turns on its primary coil and 40 turns on its secondary coil. The primary coil is connected to a 230 V a.c. supply.

Calculate the potential difference across the secondary coil, and state whether this is a step-up or step-down transformer.

Question 12 [6 marks]

Atomic Structure and Radioactivity

Carbon-14 (atomic number 6) decays by beta-minus emission to form an isotope of nitrogen (N).

Determine the mass number and atomic number of the nitrogen nucleus produced, explaining each change, and write a word equation for this decay. Then calculate the number of neutrons in the nitrogen nucleus formed.

Question 13 [6 marks]

Energy Stores, Transfers and Conservation

A washing machine motor is supplied with 1200 J of electrical energy every second. Of this, 900 J is usefully transferred to the kinetic energy store of the drum, and the rest is wasted, dissipated to the thermal energy store of the surroundings.

Calculate the efficiency of the motor as a percentage. The manufacturer then redesigns the motor so that only 180 J is wasted every second for the same 1200 J of input energy each second. Calculate the new efficiency, and state by how many percentage points the efficiency has improved.

Model solutions

Mark scheme for Question 1 [4 marks]
Question 1[4 marks]
Answer or workingMarks
useful power output = efficiency x total power inputM1
substituting 0.68 x 150M1
useful power output = 102 WA1
wasted power = 150 - 102 = 48 WA1
Final answer: Useful power output = 102 W; wasted power = 48 W.
Mark scheme for Question 2 [4 marks]
Question 2[4 marks]
Answer or workingMarks
elastic potential energy = 1/2 x spring constant x (extension)^2M1
substituting 0.5 x 60 x 0.2^2M1
elastic potential energy = 1.2A1
stating the correct unit, JA1
Final answer: 1.2 J
Mark scheme for Question 3 [4 marks]
Question 3[4 marks]
Answer or workingMarks
total distance travelled by the pulse = speed x time = 1500 x 0.8M1
total distance = 1200 mA1
depth = total distance / 2, since the pulse travels to the sea bed and backM1
depth = 600 mA1
Final answer: 600 m
Mark scheme for Question 4 [5 marks]
Question 4[5 marks]
Answer or workingMarks
energy = mass x specific latent heat of vaporisationM1
substituting 0.4 x 850000M1
energy = 340000 J (340 kJ)A1
explaining energy increases particle potential energy by overcoming attractive forces and increasing separationB1
explaining average particle kinetic energy does not increase, so temperature remains constantB1
Final answer: 340000 J (340 kJ); the temperature stays constant because the energy is used to overcome forces of attraction between particles (increasing their separation) rather than to increase their kinetic energy, though the internal energy still increases.
Mark scheme for Question 5 [5 marks]
Question 5[5 marks]
Answer or workingMarks
total momentum before = (800 x 15) + (1200 x 5)M1
total momentum before = 18000 kg m/sA1
using conservation of momentum, common velocity = total momentum / total massM1
substituting 18000 / (800 + 1200)M1
common velocity = 9 m/sA1
Final answer: Total momentum before = 18000 kg m/s; common velocity after the collision = 9 m/s.
Mark scheme for Question 6 [5 marks]
Question 6[5 marks]
Answer or workingMarks
resultant force = driving force - resistive forces = 4500 - 1200M1
resultant force = 3300 NA1
acceleration = resultant force / massM1
substituting 3300 / 1650M1
acceleration = 2 m/s^2A1
Final answer: Resultant force = 3300 N; acceleration = 2 m/s^2.
Mark scheme for Question 7 [4 marks]
Question 7[4 marks]
Answer or workingMarks
explaining that a lower-power device used for sufficiently longer can have a larger power x time product and use more energyB1
stating standby devices still draw electrical power while not actively usedB1
explaining that drawing this power for a long time produces appreciable energy useB1
explaining that energy use from many devices adds together and is charged for on the electricity billB1
Final answer: A lower-power charger used for sufficiently longer can have a larger power x time product than the hairdryer and therefore use more energy. Standby devices still draw power while not actively used. Over a long time this transfers appreciable energy; the energy used by many devices adds together and increases the electricity bill.
Mark scheme for Question 8 [2 marks]
Question 8[2 marks]
Answer or workingMarks
explaining that attractive gravity between matter was expected to slow expansion, making acceleration unexpectedB1
naming the unknown cause of accelerated expansion 'dark energy'B1
Final answer: Gravity between matter was expected to slow the expansion. Accelerating expansion was therefore unexpected; the unknown cause is called 'dark energy'.
Mark scheme for Question 9 [5 marks]
Question 9[5 marks]
Answer or workingMarks
explaining the filament lamp wastes much more energy, transferring it to the thermal energy store of the surroundings (it gets much hotter), than the LED lamp for the same light outputB1
stating this means a greater proportion of the LED lamp's input energy transfer is a useful output, so it has a higher efficiencyB1
explaining the LED lamp uses much less power for the same light output, so transfers less energy over time, reducing electricity bills over the lamp's lifetime despite its higher purchase costB1
explaining that using less electrical energy means less energy needs to be generated at power stationsB1
explaining that where this generation involves burning fossil fuels, using less energy reduces the amount of harmful or greenhouse gases released, reducing environmental impactB1
Final answer: For the same useful light output the LED wastes less energy heating the surroundings, so a larger fraction of its electrical input is useful. Lower power for the same usage time means lower energy use and running costs, which can offset the higher purchase price over time. Less electricity needs to be generated; if this displaces fossil-fuel generation, fuel use and emissions fall.
Mark scheme for Question 10 [5 marks]
Question 10[5 marks]
Answer or workingMarks
total resistance = 100 + 500 = 600 ohmM1
current = potential difference / total resistanceM1
current = 6 / 600 = 0.01 AA1
stating the current increases as the temperature of the thermistor increasesB1
explaining the resistance of a thermistor decreases as temperature increases, so the total circuit resistance decreases, increasing the currentB1
Final answer: 0.01 A at room temperature; the current increases as temperature rises because a thermistor's resistance decreases with increasing temperature.
Mark scheme for Question 11 [5 marks]
Question 11[5 marks]
Answer or workingMarks
using Vp / Vs = Np / NsM1
rearranging to Vs = Vp x Ns / NpM1
substituting 230 x 40 / 460M1
Vs = 20 VA1
stating this is a step-down transformer because the secondary coil has fewer turns than the primary coil and the secondary voltage is smaller than the primary voltageB1
Final answer: 20 V; this is a step-down transformer
Mark scheme for Question 12 [6 marks]
Question 12[6 marks]
Answer or workingMarks
mass number of nitrogen remaining 14 because a neutron changes into a proton, leaving the number of nucleons unchangedM1
mass number of nitrogen = 14A1
atomic number of nitrogen = 6 + 1, since a neutron changes into a proton, releasing the beta particleM1
atomic number of nitrogen = 7A1
the word equation: carbon-14 -> nitrogen-14 + beta-minus particle (electron); accept a balanced nuclide-symbol equation (accept an additional antineutrino for beta-minus decay)B1
neutrons in the nitrogen nucleus = mass number - atomic number = 14 - 7 = 7B1
Final answer: A neutron changes into a proton, so the number of nucleons is unchanged: mass number = 14. There is one more proton, so atomic number = 6 + 1 = 7. Carbon-14 -> nitrogen-14 + beta-minus particle (electron); an additional antineutrino is acceptable. Neutrons = 14 - 7 = 7.
Mark scheme for Question 13 [6 marks]
Question 13[6 marks]
Answer or workingMarks
original efficiency = useful output energy transfer / total input energy transferM1
substituting 900 / 1200M1
original efficiency = 75%A1
new useful output = 1200 - 180 (= 1020 J)M1
new efficiency = 1020 / 1200 = 85%A1
stating the efficiency has improved by 10 percentage pointsB1
Final answer: Original efficiency = 75%; new efficiency = 85%; an improvement of 10 percentage points.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.