Revision Library
Choose a subject
Menu
Higher Tier - Grades 4-9

GCSE Physics Higher Short Paper A

Covers Energy Stores, Transfers and Conservation, Energy Resources and Efficiency, Electrical Circuits and Components and 3 more.

8 questions - 40 marks - calculator allowed

Download PDF

Open GCSE Physics workspace

Questions

Question 1 [4 marks]

Domestic Electricity and Power

A washing machine has a power rating of 2300 W and is connected to the 230 V mains supply.

Calculate the current drawn by the washing machine, and state, with a reason, whether a 5 A fuse would be suitable for this appliance.

Question 2 [5 marks]

Energy Stores, Transfers and Conservation

An electric fan heater has a power rating of 2000 W and is switched on for 10 minutes. In this time, 900,000 J of the energy supplied is usefully transferred to the thermal energy store of the room; the rest is wasted, transferred outside the room rather than heating it.

Calculate the total energy supplied to the heater in this time, the energy that is wasted, and the efficiency of the heater as a percentage.

Question 3 [5 marks]

Energy Resources and Efficiency

A wind turbine has a maximum power output of 2 MW. On a particular day it operates at this maximum output for 9 hours, but produces no useful output for the remaining 15 hours because there is no wind.

Calculate the total energy transferred by the wind turbine that day. Then calculate the energy a resource with a steady, reliable output of 2 MW would transfer over the same 24 hours, and state what this comparison shows about intermittent resources such as wind power.

Question 4 [5 marks]

Atomic Structure and Radioactivity

Rutherford's nuclear model, developed after the alpha particle scattering experiment, described a small, dense, positively charged nucleus with electrons somewhere around it.

Explain how Niels Bohr adapted Rutherford's nuclear model, and describe why this adapted model matched experimental observations better than Rutherford's original model.

Question 5 [5 marks]

Energy Resources and Efficiency

A biomass power station burns wood pellets that release 18,000,000 J of chemical energy per kg when burned. The power station burns 2000 kg of pellets every hour and has an efficiency of 35%.

Calculate the useful electrical power output of the power station, in watts.

Question 6 [5 marks]

Particle Model of Matter

The air in a sealed gas cylinder is compressed using a hydraulic ram, which does 320 J of work on the gas. During the compression, 245 J of energy is also transferred away from the gas to the surroundings, as heat through the cylinder walls and as sound.

Use conservation of energy to calculate the increase in the internal energy of the gas during this compression. Then explain, in terms of the particle model, why compressing a gas by doing work on it can increase its temperature.

Question 7 [5 marks]

Energy Resources and Efficiency

The UK's National Grid must balance the constantly changing demand for electricity throughout the day. Wind and solar power provide an increasing share of the UK's electricity, but the National Grid must still be able to meet demand on a still, cloudy day.

Explain how using pumped storage hydroelectric power stations, alongside gas power stations, helps the National Grid balance supply and demand as more electricity is generated from wind and solar power.

Question 8 [6 marks]

Electrical Circuits and Components

A 20 ohm resistor is connected in series with a parallel combination of a 30 ohm resistor and a 60 ohm resistor. The circuit is connected to a 10 V battery.

Calculate the combined resistance of the parallel section, the total resistance of the circuit, the total current supplied by the battery, and the potential difference across the parallel section.

Model solutions

Mark scheme for Question 1 [4 marks]
Question 1[4 marks]
Answer or workingMarks
current = power / potential differenceM1
substituting 2300 / 230M1
current = 10 AA1
stating a 5 A fuse is not suitable because the operating current (10 A) is greater than 5 A, so it would blow during normal useB1
Final answer: 10 A; a 5 A fuse is not suitable because the operating current exceeds 5 A.
Mark scheme for Question 2 [5 marks]
Question 2[5 marks]
Answer or workingMarks
total input energy = power x time, using time = 10 x 60 = 600 sM1
total input energy = 2000 x 600 = 1,200,000 JA1
wasted energy = total input energy - useful output energyM1
wasted energy = 1200000 - 900000 = 300,000 JA1
efficiency = useful output energy / total input energy = 900000 / 1200000 = 0.75 (75%)B1
Final answer: Total input energy = 1,200,000 J; wasted energy = 300,000 J; efficiency = 0.75 (75%).
Mark scheme for Question 3 [5 marks]
Question 3[5 marks]
Answer or workingMarks
energy transferred by the turbine = power x time = 2 x 9M1
turbine energy = 18 MWh; accept 6.48 x 10^10 J or equivalent unitsA1
energy a steady 2 MW resource would transfer in 24 hours = 2 x 24M1
steady resource energy = 48 MWh; accept 1.728 x 10^11 J or equivalent unitsA1
interpreting the comparison: intermittent output gives less energy over the day than continuous operation at the same maximum power; a numerical shortfall is acceptable but not requiredB1
Final answer: Turbine output = 18 MWh; a steady 2 MW output over 24 hours would give 48 MWh, 30 MWh more, illustrating the unreliability of an intermittent resource like wind power.
Mark scheme for Question 4 [5 marks]
Question 4[5 marks]
Answer or workingMarks
electrons occupying only specified shells/orbits at fixed distances (discrete energy levels)B1
stating electrons in these allowed levels do not continuously lose energy and spiral into the nucleusB1
electrons changing levels by absorbing or emitting fixed amounts of energyB1
explaining these fixed energy differences produce specific frequencies/wavelengths, matching discrete atomic line spectraB1
contrasting this with Rutherford's original model, which did not specify these allowed energy levels or explain the discrete spectraB1
Final answer: Bohr proposed electrons occupy specific shells with discrete energies and do not continuously radiate energy while in an allowed level. Changes between levels absorb or emit fixed energies, giving the discrete lines seen in atomic spectra. Rutherford's original model did not specify these allowed levels or explain the line spectra.
Mark scheme for Question 5 [5 marks]
Question 5[5 marks]
Answer or workingMarks
total chemical energy released per hour = 18000000 x 2000M1
total chemical energy per hour = 3.6 x 10^10 JA1
total power = energy / time, using time = 3600 sM1
useful power = efficiency x total power = 0.35 x (3.6 x 10^10 / 3600)M1
useful electrical power output = 3.5 x 10^6 W (3500 kW)A1
Final answer: 3.5 x 10^6 W (3500 kW)
Mark scheme for Question 6 [5 marks]
Question 6[5 marks]
Answer or workingMarks
using conservation of energy: increase in internal energy = work done on the gas - energy transferred away from the gasM1
substituting 320 - 245M1
increase in internal energy = 75 JA1
explaining doing work on the gas transfers energy to the gas particles, increasing their kinetic energyB1
stating an increase in the particles' average kinetic energy corresponds to an increase in the temperature of the gasB1
Final answer: Increase in internal energy = 75 J; doing work on the gas transfers energy to its particles, increasing their average kinetic energy, which is what raises the gas temperature, even though some energy also leaves as heat.
Mark scheme for Question 7 [5 marks]
Question 7[5 marks]
Answer or workingMarks
gas stations increasing output relatively quickly when demand rises or wind/solar output fallsB1
surplus electricity powering pumps that move water uphillB1
storing energy in the gravitational potential energy store of the raised waterB1
releasing water through turbines to generate electricity quickly when neededB1
explaining stored water is finite, so gas generation can help maintain supply after stored energy is exhaustedB1
Final answer: Gas stations can increase output relatively quickly when demand rises or renewable output falls. Pumped storage uses surplus electricity to pump water uphill, increasing its gravitational potential energy. Releasing it through turbines generates electricity quickly when needed. The stored water is finite, so gas generation can help maintain supply once the stored energy is exhausted.
Mark scheme for Question 8 [6 marks]
Question 8[6 marks]
Answer or workingMarks
combined resistance of the parallel section, using 1/Rp = 1/30 + 1/60M1
parallel resistance = 20 ohmA1
total circuit resistance = 20 (series) + 20 (parallel) = 40 ohmM1
total current = potential difference / total resistance = 10 / 40M1
total current = 0.25 AA1
potential difference across the parallel section = total current x parallel resistance = 0.25 x 20 = 5 V, which could then be used to find each branch currentB1
Final answer: Parallel resistance = 20 ohm; total resistance = 40 ohm; total current = 0.25 A; potential difference across the parallel section = 5 V (giving branch currents of about 0.17 A through the 30 ohm resistor and 0.08 A through the 60 ohm resistor).

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.