Year 10 Paper 1: Core Skills
Covers energy stores and transfers, energy resources and efficiency, electrical circuits, domestic electricity and power, and forces and motion.
Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [2 marks]
Forces, Motion and Newton's Laws
A car is travelling at a constant, steady speed in a straight line along a flat road.
State what this tells you about the resultant force acting on the car, and explain your answer in terms of Newton's First Law.
Question 2 [2 marks]
Energy Resources and Efficiency
Biomass and oil are both used as fuels.
State whether biomass is a renewable or non-renewable energy resource, and give one reason why oil is described as a non-renewable resource.
Question 3 [3 marks]
Electrical Circuits and Components
A heater element is connected to a 9 V supply. A current of 3 A flows through it.
Calculate the resistance of the heater element.
Question 4 [3 marks]
Domestic Electricity and Power
A vacuum cleaner is rated at 230 V, 6 A.
Calculate the power of the vacuum cleaner.
Question 5 [3 marks]
Energy Stores, Transfers and Conservation
A kettle transfers 138,000 J of energy electrically in 60 seconds.
Calculate the power of the kettle.
Question 6 [4 marks]
Electrical Circuits and Components
Two identical fairy lights are wired in series with a battery.
State how the current through each lamp compares with the current through the other. State what happens to the other lamp if one filament breaks, and explain why. Then state why this makes it harder to locate the failed lamp than in a parallel circuit.
Question 7 [4 marks]
Domestic Electricity and Power
An electric shower has a power rating of 8.5 kW and is connected to the 230 V mains supply.
Calculate the current drawn by the shower, and state, with a reason, whether a 13 A fuse would be suitable for this appliance.
Question 8 [4 marks]
Energy Stores, Transfers and Conservation
A ball of mass 0.4 kg is dropped from rest from a height of 5 m above the ground. Assume all the gravitational potential energy is transferred to kinetic energy just before the ball hits the ground. Gravitational field strength g = 9.8 N/kg.
Calculate the speed of the ball just before it hits the ground.
Question 9 [5 marks]
Domestic Electricity and Power
A washing machine draws a constant electrical input power of 600 W. It is used for 50 minutes.
Calculate the energy transferred by the washing machine, in joules, and then in kilowatt-hours (kWh).
Question 10 [5 marks]
Electrical Circuits and Components
A 10 V battery is connected to a lamp rated at 20 W at 10 V.
Calculate the current through the lamp, and then calculate the resistance of the lamp at this operating point.
Question 11 [5 marks]
Domestic Electricity and Power
A microwave oven has a constant electrical input power of 800 W. It is used for 3 minutes to heat a meal.
Calculate the energy transferred by the microwave oven, in joules, and then in kilowatt-hours (kWh).
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| stating the resultant force on the car is zero | B1 |
| explaining Newton's First Law states an object moving at a constant velocity continues to do so unless acted on by a resultant force, so a constant velocity means the forces on the car are balanced | B1 |
| Final answer: The resultant force is zero; by Newton's First Law, an object continues at constant velocity unless a resultant force acts on it, so the forces on the car must be balanced. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| biomass being a renewable energy resource | B1 |
| oil being non-renewable because it took millions of years to form and is being used up far faster than new oil can form | B1 |
| Final answer: Biomass is renewable; oil is non-renewable because it is used up far faster than it can be replaced. | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| resistance = potential difference / current | M1 |
| substituting 9 / 3 | M1 |
| resistance = 3 ohm | A1 |
| Final answer: 3 ohm | |
| Question 4[3 marks] | |
|---|---|
| Answer or working | Marks |
| power = potential difference x current | M1 |
| substituting 230 x 6 | M1 |
| power = 1380 W | A1 |
| Final answer: 1380 W | |
| Question 5[3 marks] | |
|---|---|
| Answer or working | Marks |
| power = energy transferred / time | M1 |
| substituting 138000 / 60 | M1 |
| power = 2300 W (2.3 kW) | A1 |
| Final answer: 2300 W (2.3 kW) | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| the current through each lamp being the same | B1 |
| stating that if one lamp's filament breaks, the other lamp also goes out (no current flows anywhere in the circuit) | B1 |
| explaining this happens because there is only one path for the current in a series circuit, so breaking it at any point stops the current everywhere | B1 |
| stating that all lamps being dark makes it difficult to identify which lamp has failed | B1 |
| Final answer: The current through both lamps is equal. If one filament breaks, both lamps go out because the circuit has only one path and it is now broken. Since both are dark, it is difficult to identify which lamp has failed. | |
| Question 7[4 marks] | |
|---|---|
| Answer or working | Marks |
| current = power / potential difference | M1 |
| substituting 8500 / 230 | M1 |
| current = 37.0 A (accept 36.9-37.0 A) | A1 |
| stating a 13 A fuse is not suitable because the operating current (37 A) is greater than 13 A, so it would blow during normal use | B1 |
| Final answer: 37.0 A (36.96 A); a 13 A fuse is not suitable because the operating current exceeds 13 A. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| GPE = m g h = 0.4 x 9.8 x 5 (= 19.6 J) | M1 |
| setting kinetic energy equal to GPE (= 19.6 J) | M1 |
| rearranging KE = 1/2 m v^2 to give v^2 = 2 x 19.6 / 0.4 (= 98) | M1 |
| v = 9.9 m/s | A1 |
| Final answer: 9.9 m/s | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| time = 50 x 60 = 3000 s | M1 |
| energy transferred = power x time | M1 |
| energy transferred = 600 x 3000 = 1,800,000 J | A1 |
| converting to kWh, using power in kW x time in hours | M1 |
| energy transferred = 0.6 x (50 / 60) = 0.5 kWh | A1 |
| Final answer: 1,800,000 J (0.5 kWh). | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| current = power / potential difference | M1 |
| substituting 20 / 10 | M1 |
| current = 2 A | A1 |
| resistance = potential difference / current, using their current | M1 |
| resistance = 10 / 2 = 5 ohm | A1 |
| Final answer: Current = 2 A; resistance = 5 ohm. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| time = 3 x 60 = 180 s | M1 |
| energy transferred = power x time | M1 |
| energy transferred = 800 x 180 = 144000 J | A1 |
| converting to kWh, using power in kW x time in hours | M1 |
| energy transferred = 0.04 kWh | A1 |
| Final answer: 144000 J (0.04 kWh). | |