Year 10 Paper 3: Circuits and Motion
Covers energy resources and efficiency, electrical circuits, domestic electricity and power, the particle model of matter, atomic structure, and forces and motion.
Year 10 follows a typical teaching order. No exam board defines what belongs to Year 10, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [2 marks]
Domestic Electricity and Power
UK mains electricity is an alternating current (a.c.) supply.
State what is meant by 'alternating current', and state the approximate UK mains voltage.
Question 2 [2 marks]
Particle Model of Matter
Steam in a bathroom condenses on a cold mirror, turning back into liquid water droplets.
State what happens to the arrangement and movement of the water particles as the water changes from a gas (steam) to a liquid.
Question 3 [2 marks]
Forces, Motion and Newton's Laws
A car is travelling at a constant, steady speed in a straight line along a flat road.
State what this tells you about the resultant force acting on the car, and explain your answer in terms of Newton's First Law.
Question 4 [2 marks]
Energy Resources and Efficiency
Biomass and oil are both used as fuels.
State whether biomass is a renewable or non-renewable energy resource, and give one reason why oil is described as a non-renewable resource.
Question 5 [2 marks]
Atomic Structure and Radioactivity
An atom of aluminium has an atomic number of 13 and a mass number of 27.
State the number of protons and the number of neutrons in an atom of this aluminium isotope.
Question 6 [2 marks]
Forces, Motion and Newton's Laws
A book rests stationary on a table.
State what this tells you about the resultant force acting on the book, and explain your answer in terms of Newton's First Law.
Question 7 [3 marks]
Atomic Structure and Radioactivity
Alpha, beta and gamma are three types of radiation emitted by unstable, radioactive nuclei.
Describe what gamma radiation is, and describe its penetrating power and ionising power compared with alpha and beta radiation.
Question 8 [3 marks]
Forces, Motion and Newton's Laws
A resultant force of 450 N acts on a shopping trolley of mass 30 kg.
Calculate the acceleration of the trolley.
Question 9 [3 marks]
Electrical Circuits and Components
A heater element is connected to a 9 V supply. A current of 3 A flows through it.
Calculate the resistance of the heater element.
Question 10 [4 marks]
Forces, Motion and Newton's Laws
A raindrop falls from a cloud and eventually reaches a constant falling speed, called terminal velocity, before it hits the ground.
Explain, in terms of forces, why the raindrop's speed increases at first and then becomes constant (terminal velocity).
Question 11 [3 marks]
Energy Resources and Efficiency
An electric motor is supplied with 800 J of electrical energy. It usefully transfers 600 J to the kinetic energy store of a fan, and the rest is wasted, mostly transferred to the thermal energy store of the surroundings due to friction.
Calculate the efficiency of the motor. Give your answer as a percentage.
Question 12 [4 marks]
Particle Model of Matter
1.5 kg of ice at 0 deg C is heated until it has all melted, still at 0 deg C. The specific latent heat of fusion of ice is 334,000 J/kg.
Calculate the energy needed to melt the ice. State what happens to the temperature during melting and explain why.
Question 13 [4 marks]
Electrical Circuits and Components
Two resistors are connected in parallel across a 6 V battery. The first resistor has a resistance of 4 ohm, and the second has a resistance of 12 ohm.
Calculate the current through the first resistor and the current through the second resistor.
Question 14 [4 marks]
Energy Resources and Efficiency
An electric drone motor is supplied with 150 W of electrical power. The motor has an efficiency of 68%.
Calculate the useful power output of the motor transferred to the drone's propellers, and the power that is wasted.
Question 15 [5 marks]
Forces, Motion and Newton's Laws
A tractor pulls a trailer using a driving force of 3200 N. Friction and air resistance act on the trailer with a total resistive force of 800 N in the opposite direction. The trailer has a mass of 1200 kg.
Calculate the resultant force on the trailer, and its acceleration.
Question 16 [5 marks]
Particle Model of Matter
0.2 kg of water at 100 deg C is heated until it has all turned to steam, still at 100 deg C. The specific latent heat of vaporisation of water is 2,260,000 J/kg.
Calculate the energy needed to boil away all the water, and explain why the temperature does not increase during this process even though energy is being transferred.
Question 17 [5 marks]
Forces, Motion and Newton's Laws
A cyclist travels at a constant speed, covering 84 m in 7 s. He then brakes, and decelerates uniformly from this speed to rest in a further 3 s.
Calculate the cyclist's constant speed before braking, and then calculate his deceleration while braking.
Question 18 [5 marks]
Domestic Electricity and Power
Electricity costs 30p per kWh. A dishwasher draws a constant electrical input power of 1.8 kW and is used for 90 minutes.
Calculate the energy transferred by the dishwasher in kWh, and the cost of using it for this time.
Model solutions
| Question 1[2 marks] | |
|---|---|
| Answer or working | Marks |
| alternating current repeatedly reversing direction | B1 |
| the UK mains supply has a voltage of about 230 V | B1 |
| Final answer: Alternating current regularly reverses direction; UK mains voltage is about 230 V. | |
| Question 2[2 marks] | |
|---|---|
| Answer or working | Marks |
| the particles becoming much closer together, forming a close, random arrangement rather than being widely spaced | B1 |
| the particles remaining able to move randomly past one another but no longer travelling freely over large separations; do not require a lower average speed during condensation at constant temperature | B1 |
| Final answer: Particles become much closer together in a disordered liquid arrangement and move past one another, rather than travelling freely as a gas. Condensation at constant temperature reduces potential energy, without reducing average kinetic energy; any separate cooling does reduce average speed. | |
| Question 3[2 marks] | |
|---|---|
| Answer or working | Marks |
| stating the resultant force on the car is zero | B1 |
| explaining Newton's First Law states an object moving at a constant velocity continues to do so unless acted on by a resultant force, so a constant velocity means the forces on the car are balanced | B1 |
| Final answer: The resultant force is zero; by Newton's First Law, an object continues at constant velocity unless a resultant force acts on it, so the forces on the car must be balanced. | |
| Question 4[2 marks] | |
|---|---|
| Answer or working | Marks |
| biomass being a renewable energy resource | B1 |
| oil being non-renewable because it took millions of years to form and is being used up far faster than new oil can form | B1 |
| Final answer: Biomass is renewable; oil is non-renewable because it is used up far faster than it can be replaced. | |
| Question 5[2 marks] | |
|---|---|
| Answer or working | Marks |
| 13 protons, equal to the atomic number | B1 |
| 14 neutrons, since 27 - 13 = 14 | B1 |
| Final answer: 13 protons and 14 neutrons | |
| Question 6[2 marks] | |
|---|---|
| Answer or working | Marks |
| stating the resultant force on the book is zero | B1 |
| explaining Newton's First Law states an object at rest stays at rest unless acted on by a resultant force, so the book staying still means the forces on it (its weight and the table's support force) are balanced | B1 |
| Final answer: The resultant force is zero; by Newton's First Law, an object at rest stays at rest unless a resultant force acts on it, so the weight and support force on the book must be balanced. | |
| Question 7[3 marks] | |
|---|---|
| Answer or working | Marks |
| gamma radiation being high-energy electromagnetic radiation emitted by the nucleus; accept waves or photons | B1 |
| gamma radiation having a very high (the highest) penetrating power, passing through most materials, only significantly reduced by thick lead or several metres of concrete | B1 |
| gamma radiation being weakly ionising, the least ionising of the three types | B1 |
| Final answer: Gamma radiation consists of high-energy electromagnetic waves (photons) emitted by the nucleus. It has the greatest penetration of the three types and is significantly attenuated by thick lead or concrete. It is the least ionising of alpha, beta and gamma. | |
| Question 8[3 marks] | |
|---|---|
| Answer or working | Marks |
| acceleration = resultant force / mass | M1 |
| substituting 450 / 30 | M1 |
| acceleration = 15 m/s^2 | A1 |
| Final answer: 15 m/s^2 | |
| Question 9[3 marks] | |
|---|---|
| Answer or working | Marks |
| resistance = potential difference / current | M1 |
| substituting 9 / 3 | M1 |
| resistance = 3 ohm | A1 |
| Final answer: 3 ohm | |
| Question 10[4 marks] | |
|---|---|
| Answer or working | Marks |
| stating that initially the raindrop's weight is greater than air resistance, so there is a resultant force downwards, causing it to accelerate | B1 |
| stating that as its speed increases, air resistance increases | B1 |
| stating that eventually air resistance becomes equal in size to the raindrop's weight, so the resultant force becomes zero | B1 |
| stating that once the resultant force is zero, by Newton's First Law the raindrop no longer accelerates and continues to fall at a constant speed, terminal velocity | B1 |
| Final answer: Weight initially exceeds air resistance so the raindrop accelerates; as speed increases, air resistance increases too, until it equals the weight, making the resultant force zero, after which the raindrop falls at a constant (terminal) velocity. | |
| Question 11[3 marks] | |
|---|---|
| Answer or working | Marks |
| efficiency = useful output energy transfer / total input energy transfer | M1 |
| substituting 600 / 800 | M1 |
| efficiency = 75% (equivalently 0.75 as a fraction, converted to the requested percentage) | A1 |
| Final answer: 75% | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| energy = mass x specific latent heat of fusion | M1 |
| substituting 1.5 x 334000 | M1 |
| energy = 501000 J | A1 |
| explaining that melting increases particle potential energy rather than average kinetic energy, so temperature stays constant | B1 |
| Final answer: 501000 J (501 kJ). Temperature stays at 0 deg C during melting because energy increases particle potential energy rather than average kinetic energy. | |
| Question 13[4 marks] | |
|---|---|
| Answer or working | Marks |
| current = potential difference / resistance, applied to each resistor | M1 |
| substituting 6 / 4 for the first resistor | M1 |
| current through the first resistor = 1.5 A | A1 |
| current through the second resistor = 6 / 12 = 0.5 A | A1 |
| Final answer: 1.5 A through the 4 ohm resistor; 0.5 A through the 12 ohm resistor. | |
| Question 14[4 marks] | |
|---|---|
| Answer or working | Marks |
| useful power output = efficiency x total power input | M1 |
| substituting 0.68 x 150 | M1 |
| useful power output = 102 W | A1 |
| wasted power = 150 - 102 = 48 W | A1 |
| Final answer: Useful power output = 102 W; wasted power = 48 W. | |
| Question 15[5 marks] | |
|---|---|
| Answer or working | Marks |
| resultant force = driving force - resistive forces = 3200 - 800 | M1 |
| resultant force = 2400 N | A1 |
| acceleration = resultant force / mass | M1 |
| substituting 2400 / 1200 | M1 |
| acceleration = 2 m/s^2 | A1 |
| Final answer: Resultant force = 2400 N; acceleration = 2 m/s^2. | |
| Question 16[5 marks] | |
|---|---|
| Answer or working | Marks |
| energy = mass x specific latent heat of vaporisation | M1 |
| substituting 0.2 x 2260000 | M1 |
| energy = 452000 J (452 kJ) | A1 |
| explaining energy increases particle potential energy by overcoming attractive forces and increasing separation | B1 |
| explaining average particle kinetic energy does not increase, so temperature remains constant | B1 |
| Final answer: 452000 J (452 kJ); the temperature stays constant because the energy is used to overcome forces of attraction between particles (increasing their separation) rather than to increase their kinetic energy, though the internal energy still increases. | |
| Question 17[5 marks] | |
|---|---|
| Answer or working | Marks |
| speed = distance / time | M1 |
| substituting 84 / 7 | M1 |
| speed = 12 m/s | A1 |
| acceleration = change in velocity / time = (0 - 12) / 3 | M1 |
| deceleration = 4 m/s^2 (acceleration = -4 m/s^2) | A1 |
| Final answer: Constant speed = 12 m/s; deceleration = 4 m/s^2. | |
| Question 18[5 marks] | |
|---|---|
| Answer or working | Marks |
| time = 90 / 60 (= 1.5 hours) | M1 |
| energy transferred = power x time = 1.8 x 1.5 | M1 |
| energy transferred = 2.7 kWh | A1 |
| cost = energy transferred x cost per kWh = 2.7 x 30 | M1 |
| cost = 81p | A1 |
| Final answer: Energy transferred = 2.7 kWh; cost = 81p. | |