Year 11 Paper 1: Energy and Electricity Recap
Covers energy stores and transfers, energy resources and efficiency, electrical circuits, domestic electricity and power, and the particle model of matter.
Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [3 marks]
Energy Resources and Efficiency
A newspaper article claims that renewable energy resources are the only energy resources that cause any environmental damage.
Evaluate this claim by giving three disadvantages of continuing to rely on fossil fuels for electricity generation.
Question 2 [3 marks]
Energy Stores, Transfers and Conservation
An electric drill transfers 54,000 J of energy electrically in 45 seconds.
Calculate the power of the drill.
Question 3 [3 marks]
Electrical Circuits and Components
A lamp is connected to a 12 V power supply. A current of 0.5 A flows through the lamp.
Calculate the resistance of the lamp.
Question 4 [4 marks]
Domestic Electricity and Power
A three-pin plug used in the UK contains a live wire, a neutral wire and an earth wire.
State the approximate potential difference between the live wire and earth, and describe the function of the earth wire in terms of electrical safety.
Question 5 [4 marks]
Particle Model of Matter
A block of solid wax is heated until it melts and becomes a liquid.
Describe what happens to the arrangement, movement and forces between the wax particles as the wax changes from a solid to a liquid, and state what happens to the mass of the wax during melting.
Question 6 [4 marks]
Energy Stores, Transfers and Conservation
A ball of mass 0.4 kg is dropped from rest from a height of 5 m above the ground. Assume all the gravitational potential energy is transferred to kinetic energy just before the ball hits the ground. Gravitational field strength g = 9.8 N/kg.
Calculate the speed of the ball just before it hits the ground.
Question 7 [5 marks]
Energy Resources and Efficiency
A solar panel receives 1000 W of power from sunlight and produces 180 W of useful electrical power.
Calculate the efficiency of the solar panel. State the theoretical maximum efficiency any device could have, and state where most of the wasted power is dissipated to.
Question 8 [4 marks]
Particle Model of Matter
1.5 kg of ice at 0 deg C is heated until it has all melted, still at 0 deg C. The specific latent heat of fusion of ice is 334,000 J/kg.
Calculate the energy needed to melt the ice. State what happens to the temperature during melting and explain why.
Question 9 [5 marks]
Energy Resources and Efficiency
A wind turbine has a maximum power output of 2 MW. On a particular day it operates at this maximum output for 9 hours, but produces no useful output for the remaining 15 hours because there is no wind.
Calculate the total energy transferred by the wind turbine that day. Then calculate the energy a resource with a steady, reliable output of 2 MW would transfer over the same 24 hours, and state what this comparison shows about intermittent resources such as wind power.
Question 10 [5 marks]
Electrical Circuits and Components
A 12 ohm resistor and an 18 ohm resistor are connected in series with a 9 V battery.
Calculate the total resistance of the circuit, the current flowing through the circuit, and the potential difference across the 12 ohm resistor.
Model solutions
| Question 1[3 marks] | |
|---|---|
| Answer or working | Marks |
| one valid disadvantage, such as carbon dioxide contributing to climate change, sulfur dioxide causing acid rain, harmful particulates, habitat damage during extraction, oil spills or finite fuel resources | B1 |
| a second distinct valid disadvantage; accept another relevant explained example | B1 |
| a third distinct valid disadvantage; do not count one consequence twice | B1 |
| Final answer: Any three of: releases carbon dioxide, contributing to global warming; releases sulfur dioxide, causing acid rain; extraction damages habitats or risks oil spills. | |
| Question 2[3 marks] | |
|---|---|
| Answer or working | Marks |
| power = energy transferred / time | M1 |
| substituting 54000 / 45 | M1 |
| power = 1200 W | A1 |
| Final answer: 1200 W | |
| Question 3[3 marks] | |
|---|---|
| Answer or working | Marks |
| resistance = potential difference / current | M1 |
| substituting 12 / 0.5 | M1 |
| resistance = 24 ohm | A1 |
| Final answer: 24 ohm | |
| Question 4[4 marks] | |
|---|---|
| Answer or working | Marks |
| the potential difference between the live wire and earth being about 230 V | B1 |
| stating the earth wire is a safety wire connected to the case (or metal parts) of an appliance | B1 |
| explaining that if a fault occurs and the live wire touches the case, a large current flows to earth through the earth wire rather than through a person touching the case | B1 |
| stating this large current blows the fuse (or trips the circuit breaker), disconnecting the live wire and cutting off the electricity supply to the appliance, protecting the user from electric shock | B1 |
| Final answer: Live is about 230 V relative to earth. The earth wire connects the metal case to earth by a low-resistance path. If live touches the case, a large fault current flows along this path, causing the fuse to blow or circuit breaker to trip and disconnect live, reducing the risk of electric shock. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| the fixed, ordered arrangement becoming disordered and generally further apart, while particles remain close together | B1 |
| the particles being able to move around each other rather than only vibrating in fixed positions; no increase in average kinetic energy is required during melting | B1 |
| stating energy is used to overcome some of the attractive binding between particles so they are no longer held at fixed positions, though they remain close together | B1 |
| the mass remaining unchanged during melting | B1 |
| Final answer: Wax particles become disordered and generally further apart, while remaining close together. They move past one another rather than only vibrating about fixed positions. Energy overcomes some attractive binding so particles are no longer fixed in place. Mass remains unchanged because no particles are lost. | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| GPE = m g h = 0.4 x 9.8 x 5 (= 19.6 J) | M1 |
| setting kinetic energy equal to GPE (= 19.6 J) | M1 |
| rearranging KE = 1/2 m v^2 to give v^2 = 2 x 19.6 / 0.4 (= 98) | M1 |
| v = 9.9 m/s | A1 |
| Final answer: 9.9 m/s | |
| Question 7[5 marks] | |
|---|---|
| Answer or working | Marks |
| efficiency = useful power output / total power input | M1 |
| substituting 180 / 1000 | M1 |
| efficiency = 0.18 (18%) | A1 |
| stating the theoretical maximum efficiency is 1 (100%) | B1 |
| stating unused energy heats the panel and surroundings; accept energy reflected away and subsequently absorbed by the surroundings | B1 |
| Final answer: Efficiency = 180 / 1000 = 0.18 (18%); the theoretical maximum is 1 (100%). The remaining 820 W mainly heats the panel and surroundings. Some sunlight can be reflected away and later absorbed elsewhere. | |
| Question 8[4 marks] | |
|---|---|
| Answer or working | Marks |
| energy = mass x specific latent heat of fusion | M1 |
| substituting 1.5 x 334000 | M1 |
| energy = 501000 J | A1 |
| explaining that melting increases particle potential energy rather than average kinetic energy, so temperature stays constant | B1 |
| Final answer: 501000 J (501 kJ). Temperature stays at 0 deg C during melting because energy increases particle potential energy rather than average kinetic energy. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| energy transferred by the turbine = power x time = 2 x 9 | M1 |
| turbine energy = 18 MWh; accept 6.48 x 10^10 J or equivalent units | A1 |
| energy a steady 2 MW resource would transfer in 24 hours = 2 x 24 | M1 |
| steady resource energy = 48 MWh; accept 1.728 x 10^11 J or equivalent units | A1 |
| interpreting the comparison: intermittent output gives less energy over the day than continuous operation at the same maximum power; a numerical shortfall is acceptable but not required | B1 |
| Final answer: Turbine output = 18 MWh; a steady 2 MW output over 24 hours would give 48 MWh, 30 MWh more, illustrating the unreliability of an intermittent resource like wind power. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| total resistance in series = sum of the individual resistances = 12 + 18 | M1 |
| total resistance = 30 ohm | A1 |
| current = potential difference / total resistance = 9 / 30 | M1 |
| current = 0.3 A | A1 |
| potential difference across the 12 ohm resistor = current x resistance = 0.3 x 12 = 3.6 V | B1 |
| Final answer: Total resistance = 30 ohm; current = 0.3 A; potential difference across the 12 ohm resistor = 3.6 V. | |