Revision Library
Choose a subject
Menu
Foundation Tier - Year 11

Year 11 Paper 2: Matter, Forces and Waves

Covers domestic electricity and power, the particle model of matter, atomic structure, forces and motion, momentum, moments and elasticity, and wave properties.

17 questions - 60 marks - calculator allowed

Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.

Download PDF

Open GCSE Physics workspace

Questions

Question 1 [2 marks]

Domestic Electricity and Power

UK mains electricity is an alternating current (a.c.) supply.

State what is meant by 'alternating current', and state the approximate UK mains voltage.

Question 2 [2 marks]

Momentum and Forces in Action

A tennis ball and a shot-put ball are thrown with the same velocity.

State the equation linking momentum, mass and velocity, and state which of the two, the tennis ball or the shot-put ball, has the greater momentum. Give a reason.

Question 3 [2 marks]

Moments, Elasticity and Pressure

A spanner is used to turn a nut. The force is applied further from the pivot (the nut) to make it easier to turn.

State the equation for the moment of a force, and explain why applying the force further from the pivot makes it easier to turn the nut.

Question 4 [2 marks]

Particle Model of Matter

Steam in a bathroom condenses on a cold mirror, turning back into liquid water droplets.

State what happens to the arrangement and movement of the water particles as the water changes from a gas (steam) to a liquid.

Question 5 [3 marks]

Wave Properties and Behaviour

A water wave has a frequency of 4 Hz and a wavelength of 1.5 m.

Calculate the speed of the wave.

Question 6 [3 marks]

Atomic Structure and Radioactivity

Alpha, beta and gamma are three types of radiation emitted by unstable, radioactive nuclei.

Describe what gamma radiation is, and describe its penetrating power and ionising power compared with alpha and beta radiation.

Question 7 [3 marks]

Forces, Motion and Newton's Laws

A resultant force of 450 N acts on a shopping trolley of mass 30 kg.

Calculate the acceleration of the trolley.

Question 8 [3 marks]

Particle Model of Matter

A wooden block has a mass of 450 g and a volume of 500 cm^3.

Calculate the density of the wood. Give the units of your answer.

Question 9 [3 marks]

Moments, Elasticity and Pressure

A force of 25 N is applied at a distance of 0.6 m from a pivot, perpendicular to the arm it acts on.

Calculate the moment of the force about the pivot.

Question 10 [3 marks]

Wave Properties and Behaviour

A longitudinal wave, such as a sound wave, travels through the air.

State what is meant by a compression in a longitudinal wave, and state what is meant by a rarefaction. State how the wavelength of a longitudinal wave can be measured in terms of compressions.

Question 11 [4 marks]

Atomic Structure and Radioactivity

A sample of a radioactive isotope has an initial net count rate of 960 counts per minute, after background radiation has been subtracted. The detector conditions remain unchanged. The isotope has a half-life of 5 hours.

Calculate the net count rate after 20 hours, and state what is meant by half-life.

Question 12 [5 marks]

Domestic Electricity and Power

A microwave oven has a constant electrical input power of 800 W. It is used for 3 minutes to heat a meal.

Calculate the energy transferred by the microwave oven, in joules, and then in kilowatt-hours (kWh).

Question 13 [5 marks]

Forces, Motion and Newton's Laws

A cyclist travels at a constant speed, covering 84 m in 7 s. He then brakes, and decelerates uniformly from this speed to rest in a further 3 s.

Calculate the cyclist's constant speed before braking, and then calculate his deceleration while braking.

Question 14 [5 marks]

Atomic Structure and Radioactivity

A sample of a radioactive isotope has a half-life of 3 hours. Initially there is 96 g of the isotope present.

Calculate the mass of the isotope remaining after 4 half-lives, and state how long this takes. State what is meant by half-life.

Question 15 [5 marks]

Forces, Motion and Newton's Laws

A cyclist accelerates from rest and reaches a velocity of 8 m/s after 5 seconds.

Calculate the acceleration of the cyclist. The cyclist and bicycle have a combined mass of 75 kg; calculate the resultant force needed to produce this acceleration.

Question 16 [5 marks]

Wave Properties and Behaviour

A water wave travels from deep water, where its speed is 2.4 m/s and its wavelength is 0.6 m, into a region of shallower water where its speed decreases to 1.6 m/s. The frequency of the wave does not change as it crosses the boundary.

Calculate the frequency of the wave, and its wavelength in the shallower water.

Question 17 [5 marks]

Forces, Motion and Newton's Laws

A tractor pulls a trailer using a driving force of 3200 N. Friction and air resistance act on the trailer with a total resistive force of 800 N in the opposite direction. The trailer has a mass of 1200 kg.

Calculate the resultant force on the trailer, and its acceleration.

Model solutions

Mark scheme for Question 1 [2 marks]
Question 1[2 marks]
Answer or workingMarks
alternating current repeatedly reversing directionB1
the UK mains supply has a voltage of about 230 VB1
Final answer: Alternating current regularly reverses direction; UK mains voltage is about 230 V.
Mark scheme for Question 2 [2 marks]
Question 2[2 marks]
Answer or workingMarks
momentum = mass x velocityB1
the shot-put ball has the greater momentum because it has a much greater mass, and both are moving at the same velocityB1
Final answer: Momentum = mass x velocity; the shot-put ball has greater momentum because it has a much greater mass at the same velocity.
Mark scheme for Question 3 [2 marks]
Question 3[2 marks]
Answer or workingMarks
moment = force x distance, the perpendicular distance from the pivot to the line of action of the forceB1
explaining that for the same force, increasing the distance from the pivot increases the moment, so less force is needed to achieve the moment needed to turn the nutB1
Final answer: Moment = force x perpendicular distance from the pivot to the force's line of action; increasing that distance increases the moment for the same force, so less force is needed.
Mark scheme for Question 4 [2 marks]
Question 4[2 marks]
Answer or workingMarks
the particles becoming much closer together, forming a close, random arrangement rather than being widely spacedB1
the particles remaining able to move randomly past one another but no longer travelling freely over large separations; do not require a lower average speed during condensation at constant temperatureB1
Final answer: Particles become much closer together in a disordered liquid arrangement and move past one another, rather than travelling freely as a gas. Condensation at constant temperature reduces potential energy, without reducing average kinetic energy; any separate cooling does reduce average speed.
Mark scheme for Question 5 [3 marks]
Question 5[3 marks]
Answer or workingMarks
wave speed = frequency x wavelengthM1
substituting 4 x 1.5M1
wave speed = 6 m/sA1
Final answer: 6 m/s
Mark scheme for Question 6 [3 marks]
Question 6[3 marks]
Answer or workingMarks
gamma radiation being high-energy electromagnetic radiation emitted by the nucleus; accept waves or photonsB1
gamma radiation having a very high (the highest) penetrating power, passing through most materials, only significantly reduced by thick lead or several metres of concreteB1
gamma radiation being weakly ionising, the least ionising of the three typesB1
Final answer: Gamma radiation consists of high-energy electromagnetic waves (photons) emitted by the nucleus. It has the greatest penetration of the three types and is significantly attenuated by thick lead or concrete. It is the least ionising of alpha, beta and gamma.
Mark scheme for Question 7 [3 marks]
Question 7[3 marks]
Answer or workingMarks
acceleration = resultant force / massM1
substituting 450 / 30M1
acceleration = 15 m/s^2A1
Final answer: 15 m/s^2
Mark scheme for Question 8 [3 marks]
Question 8[3 marks]
Answer or workingMarks
density = mass / volumeM1
substituting 450 / 500M1
density = 0.9 g/cm^3A1
Final answer: 0.9 g/cm^3
Mark scheme for Question 9 [3 marks]
Question 9[3 marks]
Answer or workingMarks
moment = force x distanceM1
substituting 25 x 0.6M1
moment = 15 N mA1
Final answer: 15 N m
Mark scheme for Question 10 [3 marks]
Question 10[3 marks]
Answer or workingMarks
a compression being a region where the particles are pushed closer together than normal, giving a higher pressure/densityB1
a rarefaction being a region where the particles are spread further apart than normal, giving a lower pressure/densityB1
stating the wavelength can be measured as the distance from one compression to the next compression, or from one rarefaction to the next rarefactionB1
Final answer: A compression is where particles are pushed closer together; a rarefaction is where they are spread further apart; wavelength can be measured from one compression (or rarefaction) to the next.
Mark scheme for Question 11 [4 marks]
Question 11[4 marks]
Answer or workingMarks
number of half-lives elapsed = 20 / 5 = 4M1
halving the count rate four times: 960, then 480, then 240, then 120, then 60M1
count rate = 60 counts per minuteA1
stating half-life is the time taken for the number of undecayed parent nuclei, mass of the parent isotope remaining, or activity to halve; accept background-corrected count rate halving with unchanged detector conditionsA1
Final answer: 60 counts per minute. Half-life is the time taken for the number of undecayed parent nuclei, or their activity, to halve.
Mark scheme for Question 12 [5 marks]
Question 12[5 marks]
Answer or workingMarks
time = 3 x 60 = 180 sM1
energy transferred = power x timeM1
energy transferred = 800 x 180 = 144000 JA1
converting to kWh, using power in kW x time in hoursM1
energy transferred = 0.04 kWhA1
Final answer: 144000 J (0.04 kWh).
Mark scheme for Question 13 [5 marks]
Question 13[5 marks]
Answer or workingMarks
speed = distance / timeM1
substituting 84 / 7M1
speed = 12 m/sA1
acceleration = change in velocity / time = (0 - 12) / 3M1
deceleration = 4 m/s^2 (acceleration = -4 m/s^2)A1
Final answer: Constant speed = 12 m/s; deceleration = 4 m/s^2.
Mark scheme for Question 14 [5 marks]
Question 14[5 marks]
Answer or workingMarks
after each half-life the mass halves: 96, then 48, then 24, then 12, then 6M1
mass remaining after 4 half-lives = 6 gA1
time = number of half-lives x half-life = 4 x 3M1
time = 12 hoursA1
stating half-life is the time taken for the number of undecayed parent nuclei, mass of the parent isotope remaining, or activity to halve; accept background-corrected count rate halving with unchanged detector conditionsB1
Final answer: 6 g remains after 4 half-lives, which takes 12 hours. Half-life is the time taken for the number of undecayed parent nuclei, or their activity, to halve.
Mark scheme for Question 15 [5 marks]
Question 15[5 marks]
Answer or workingMarks
acceleration = change in velocity / timeM1
substituting (8 - 0) / 5M1
acceleration = 1.6 m/s^2; average acceleration unless uniform acceleration is assumedA1
resultant force = mass x acceleration = 75 x 1.6M1
resultant force = 120 N; average resultant force unless uniform acceleration is assumedA1
Final answer: Acceleration = 1.6 m/s^2; resultant force = 120 N These are average values; they are also constant values if acceleration is uniform.
Mark scheme for Question 16 [5 marks]
Question 16[5 marks]
Answer or workingMarks
frequency = wave speed / wavelength, using the deep water valuesM1
substituting 2.4 / 0.6M1
frequency = 4 HzA1
new wavelength = wave speed / frequency, using the shallow water speed and the unchanged frequency = 1.6 / 4M1
new wavelength = 0.4 mA1
Final answer: Frequency = 4 Hz (unchanged); wavelength in the shallower water = 0.4 m.
Mark scheme for Question 17 [5 marks]
Question 17[5 marks]
Answer or workingMarks
resultant force = driving force - resistive forces = 3200 - 800M1
resultant force = 2400 NA1
acceleration = resultant force / massM1
substituting 2400 / 1200M1
acceleration = 2 m/s^2A1
Final answer: Resultant force = 2400 N; acceleration = 2 m/s^2.

Build a free practice pack.

Pick the topics, add the student's name and print one PDF.