Year 11 Paper 4: Energy, Particles and Forces
Covers energy stores and transfers, energy resources and efficiency, electrical circuits, the particle model of matter, atomic structure, forces and motion, and momentum.
Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [4 marks]
Momentum and Forces in Action
A trolley of mass 2 kg moving at 3 m/s collides with a stationary trolley of mass 1 kg. After the collision, the two trolleys stick together and move off with a common velocity.
Calculate the total momentum of the system before the collision, and use conservation of momentum to calculate the common velocity of the trolleys after the collision.
Question 2 [4 marks]
Energy Resources and Efficiency
An electric drone motor is supplied with 150 W of electrical power. The motor has an efficiency of 68%.
Calculate the useful power output of the motor transferred to the drone's propellers, and the power that is wasted.
Question 3 [4 marks]
Energy Stores, Transfers and Conservation
A ball of mass 0.4 kg is dropped from rest from a height of 5 m above the ground. Assume all the gravitational potential energy is transferred to kinetic energy just before the ball hits the ground. Gravitational field strength g = 9.8 N/kg.
Calculate the speed of the ball just before it hits the ground.
Question 4 [4 marks]
Electrical Circuits and Components
A current of 3 A flows through a component connected to a 12 V supply for 40 seconds.
Calculate the charge that flows through the component, and hence calculate the energy transferred.
Question 5 [5 marks]
Forces, Motion and Newton's Laws
A tractor pulls a trailer using a driving force of 3200 N. Friction and air resistance act on the trailer with a total resistive force of 800 N in the opposite direction. The trailer has a mass of 1200 kg.
Calculate the resultant force on the trailer, and its acceleration.
Question 6 [5 marks]
Atomic Structure and Radioactivity
A sample of a radioactive isotope has a half-life of 3 hours. Initially there is 96 g of the isotope present.
Calculate the mass of the isotope remaining after 4 half-lives, and state how long this takes. State what is meant by half-life.
Question 7 [5 marks]
Particle Model of Matter
The air in a sealed gas cylinder is compressed using a hydraulic ram, which does 320 J of work on the gas. During the compression, 245 J of energy is also transferred away from the gas to the surroundings, as heat through the cylinder walls and as sound.
Use conservation of energy to calculate the increase in the internal energy of the gas during this compression. Then explain, in terms of the particle model, why compressing a gas by doing work on it can increase its temperature.
Question 8 [5 marks]
Electrical Circuits and Components
A negative-temperature-coefficient (NTC) thermistor is connected in series with a fixed 100 ohm resistor and a 6 V battery. At room temperature the thermistor has a resistance of 500 ohm.
Calculate the current in the circuit at room temperature. Then state and explain what happens to this current if the temperature of the thermistor increases.
Question 9 [6 marks]
Particle Model of Matter
A gas syringe contains a fixed mass of gas at a pressure of 1.05 x 10^5 Pa and a volume of 4.8 x 10^-5 m^3. The gas is slowly expanded at constant temperature until its pressure falls to 6.0 x 10^4 Pa.
Calculate the new volume of the gas, and explain, using the particle model, why the pressure falls as the volume increases at constant temperature.
Question 10 [6 marks]
Electrical Circuits and Components
A 20 ohm resistor is connected in series with a parallel combination of a 30 ohm resistor and a 60 ohm resistor. The circuit is connected to a 10 V battery.
Calculate the combined resistance of the parallel section, the total resistance of the circuit, the total current supplied by the battery, and the potential difference across the parallel section.
Question 11 [6 marks]
Momentum and Forces in Action
In a road safety test, a crash test dummy of mass 70 kg is in a car travelling at 15 m/s when it collides with a wall. In Test A the car has no airbag, and the dummy is brought to rest in 0.05 s by the seatbelt and dashboard. In Test B an airbag is fitted, and the dummy is brought to rest in 0.2 s.
Calculate the average force on the dummy in Test A and in Test B, and explain why fitting an airbag makes a collision safer for a passenger.
Question 12 [6 marks]
Atomic Structure and Radioactivity
Carbon-14 (atomic number 6) decays by beta-minus emission to form an isotope of nitrogen (N).
Determine the mass number and atomic number of the nitrogen nucleus produced, explaining each change, and write a word equation for this decay. Then calculate the number of neutrons in the nitrogen nucleus formed.
Model solutions
| Question 1[4 marks] | |
|---|---|
| Answer or working | Marks |
| total momentum before = (2 x 3) + (1 x 0) | M1 |
| total momentum before = 6 kg m/s | A1 |
| using conservation of momentum, common velocity = total momentum / total mass = 6 / 3 | M1 |
| common velocity = 2 m/s | A1 |
| Final answer: Momentum before = 6 kg m/s; common velocity after = 2 m/s | |
| Question 2[4 marks] | |
|---|---|
| Answer or working | Marks |
| useful power output = efficiency x total power input | M1 |
| substituting 0.68 x 150 | M1 |
| useful power output = 102 W | A1 |
| wasted power = 150 - 102 = 48 W | A1 |
| Final answer: Useful power output = 102 W; wasted power = 48 W. | |
| Question 3[4 marks] | |
|---|---|
| Answer or working | Marks |
| GPE = m g h = 0.4 x 9.8 x 5 (= 19.6 J) | M1 |
| setting kinetic energy equal to GPE (= 19.6 J) | M1 |
| rearranging KE = 1/2 m v^2 to give v^2 = 2 x 19.6 / 0.4 (= 98) | M1 |
| v = 9.9 m/s | A1 |
| Final answer: 9.9 m/s | |
| Question 4[4 marks] | |
|---|---|
| Answer or working | Marks |
| charge = current x time | M1 |
| substituting 3 x 40 | M1 |
| charge = 120 C | A1 |
| energy transferred = charge x potential difference = 120 x 12 = 1440 J | A1 |
| Final answer: Charge = 120 C; energy transferred = 1440 J. | |
| Question 5[5 marks] | |
|---|---|
| Answer or working | Marks |
| resultant force = driving force - resistive forces = 3200 - 800 | M1 |
| resultant force = 2400 N | A1 |
| acceleration = resultant force / mass | M1 |
| substituting 2400 / 1200 | M1 |
| acceleration = 2 m/s^2 | A1 |
| Final answer: Resultant force = 2400 N; acceleration = 2 m/s^2. | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| after each half-life the mass halves: 96, then 48, then 24, then 12, then 6 | M1 |
| mass remaining after 4 half-lives = 6 g | A1 |
| time = number of half-lives x half-life = 4 x 3 | M1 |
| time = 12 hours | A1 |
| stating half-life is the time taken for the number of undecayed parent nuclei, mass of the parent isotope remaining, or activity to halve; accept background-corrected count rate halving with unchanged detector conditions | B1 |
| Final answer: 6 g remains after 4 half-lives, which takes 12 hours. Half-life is the time taken for the number of undecayed parent nuclei, or their activity, to halve. | |
| Question 7[5 marks] | |
|---|---|
| Answer or working | Marks |
| using conservation of energy: increase in internal energy = work done on the gas - energy transferred away from the gas | M1 |
| substituting 320 - 245 | M1 |
| increase in internal energy = 75 J | A1 |
| explaining doing work on the gas transfers energy to the gas particles, increasing their kinetic energy | B1 |
| stating an increase in the particles' average kinetic energy corresponds to an increase in the temperature of the gas | B1 |
| Final answer: Increase in internal energy = 75 J; doing work on the gas transfers energy to its particles, increasing their average kinetic energy, which is what raises the gas temperature, even though some energy also leaves as heat. | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| total resistance = 100 + 500 = 600 ohm | M1 |
| current = potential difference / total resistance | M1 |
| current = 6 / 600 = 0.01 A | A1 |
| stating the current increases as the temperature of the thermistor increases | B1 |
| explaining the resistance of a thermistor decreases as temperature increases, so the total circuit resistance decreases, increasing the current | B1 |
| Final answer: 0.01 A at room temperature; the current increases as temperature rises because a thermistor's resistance decreases with increasing temperature. | |
| Question 9[6 marks] | |
|---|---|
| Answer or working | Marks |
| using pressure x volume = constant, at constant temperature | M1 |
| substituting p1 V1 = p2 V2, i.e. 1.05 x 10^5 x 4.8 x 10^-5 = 6.0 x 10^4 x V2 | M1 |
| p1 V1 = 5.04 (J) | A1 |
| rearranging to V2 = 5.04 / (6.0 x 10^4) | M1 |
| new volume = 8.4 x 10^-5 m^3 | A1 |
| explaining that at constant temperature average particle speed is unchanged, but the larger volume has a lower number density and fewer collisions per unit wall area per second, decreasing pressure. | B1 |
| Final answer: 8.4 x 10^-5 m^3. At constant temperature average particle speed is unchanged, but the larger volume has a lower number density and fewer collisions per unit wall area per second, decreasing pressure. | |
| Question 10[6 marks] | |
|---|---|
| Answer or working | Marks |
| combined resistance of the parallel section, using 1/Rp = 1/30 + 1/60 | M1 |
| parallel resistance = 20 ohm | A1 |
| total circuit resistance = 20 (series) + 20 (parallel) = 40 ohm | M1 |
| total current = potential difference / total resistance = 10 / 40 | M1 |
| total current = 0.25 A | A1 |
| potential difference across the parallel section = total current x parallel resistance = 0.25 x 20 = 5 V, which could then be used to find each branch current | B1 |
| Final answer: Parallel resistance = 20 ohm; total resistance = 40 ohm; total current = 0.25 A; potential difference across the parallel section = 5 V (giving branch currents of about 0.17 A through the 30 ohm resistor and 0.08 A through the 60 ohm resistor). | |
| Question 11[6 marks] | |
|---|---|
| Answer or working | Marks |
| magnitude of change in momentum = 70 x 15 = 1050 kg m/s, the same in both tests | M1 |
| force in Test A = change in momentum / time = 1050 / 0.05 | M1 |
| force in Test A = 21000 N | A1 |
| force in Test B = 1050 / 0.2 | M1 |
| force in Test B = 5250 N | A1 |
| explaining the airbag increases the time taken for the dummy's momentum to reach zero, reducing the rate of change of momentum and so the force on the dummy for the same change in momentum, making injury less likely | B1 |
| Final answer: Force in Test A = 21000 N; force in Test B = 5250 N; the airbag extends the stopping time, lowering the force for the same change in momentum. Both average forces act opposite to the original motion of the dummy. | |
| Question 12[6 marks] | |
|---|---|
| Answer or working | Marks |
| mass number of nitrogen remaining 14 because a neutron changes into a proton, leaving the number of nucleons unchanged | M1 |
| mass number of nitrogen = 14 | A1 |
| atomic number of nitrogen = 6 + 1, since a neutron changes into a proton, releasing the beta particle | M1 |
| atomic number of nitrogen = 7 | A1 |
| the word equation: carbon-14 -> nitrogen-14 + beta-minus particle (electron); accept a balanced nuclide-symbol equation (accept an additional antineutrino for beta-minus decay) | B1 |
| neutrons in the nitrogen nucleus = mass number - atomic number = 14 - 7 = 7 | B1 |
| Final answer: A neutron changes into a proton, so the number of nucleons is unchanged: mass number = 14. There is one more proton, so atomic number = 6 + 1 = 7. Carbon-14 -> nitrogen-14 + beta-minus particle (electron); an additional antineutrino is acceptable. Neutrons = 14 - 7 = 7. | |