Year 11 Paper 5: Particles, Waves and Space
Covers the particle model of matter, atomic structure, moments and elasticity, wave properties, magnetism and electromagnetism, and space physics.
Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [3 marks]
Space Physics
Light from a source can be blue-shifted or red-shifted depending on the source's motion relative to an observer.
State what is meant by 'blue-shift', and explain why the fact that light from almost all distant galaxies is red-shifted, rather than blue-shifted, supports the idea that the universe is expanding.
Question 2 [4 marks]
Moments, Elasticity and Pressure
A spring with a spring constant of 80 N/m is stretched elastically by 0.15 m.
Calculate the elastic potential energy stored in the spring. Give the units of your answer.
Question 3 [4 marks]
Wave Properties and Behaviour
An echo sounder on a boat sends a pulse of sound towards a shoal of fish below. The pulse returns to the boat 0.6 s after it was sent. The speed of sound in water is 1500 m/s.
Calculate the depth of the shoal of fish below the boat.
Question 4 [4 marks]
Particle Model of Matter
A sealed, rigid container holds a fixed mass of gas. The gas is cooled while the volume of the container stays constant.
Use the particle model to explain why the pressure of the gas decreases as its temperature decreases at constant volume.
Question 5 [4 marks]
Magnetism and Electromagnetism
A straight wire carries a current of 2500 mA and is placed at right angles to a magnetic field of flux density 60 mT. The length of wire in the field is 40 cm.
Calculate the force on the wire, converting all values to standard SI units first.
Question 6 [4 marks]
Particle Model of Matter
A sealed container holds a fixed mass of gas. The gas is heated while the volume of the container stays constant.
Use the particle model to explain why the pressure of the gas increases as its temperature increases at constant volume.
Question 7 [5 marks]
Atomic Structure and Radioactivity
A sample of a radioactive isotope has a half-life of 3 hours. Initially there is 96 g of the isotope present.
Calculate the mass of the isotope remaining after 4 half-lives, and state how long this takes. State what is meant by half-life.
Question 8 [5 marks]
Moments, Elasticity and Pressure
A spring with a spring constant of 180 N/m is compressed by 0.1 m and used to launch a small toy rocket of mass 0.025 kg vertically upwards. Assume all the elastic potential energy is transferred to the kinetic energy store of the rocket as it leaves the spring.
Calculate the elastic potential energy stored in the spring, and the speed of the rocket as it leaves the spring.
Question 9 [5 marks]
Space Physics
Astronomers use the redshift of light from distant galaxies, together with Hubble's Law, to estimate how long ago the universe began.
Explain how measurements of the redshift and distance of many galaxies can be used to estimate the age of the universe, and explain why this age can only be an estimate rather than an exact value.
Question 10 [5 marks]
Wave Properties and Behaviour
A student uses an oscilloscope to display a sound wave picked up by a microphone. The time-base of the oscilloscope is set so that each horizontal division represents 0.005 s. The wave shown completes exactly 3 full cycles across 6 horizontal divisions on the screen.
Calculate the time period of one cycle of the wave, and use this to calculate the frequency of the sound wave.
Question 11 [5 marks]
Space Physics
A satellite orbits the Earth in a stable circular orbit of radius 7.0 x 10^6 m, completing one full orbit every 6000 s.
Calculate the orbital speed of the satellite, using the fact that in one orbit it travels a distance equal to the circumference of its circular orbit, 2 x pi x r. Then explain, in terms of velocity, why the satellite is accelerating even though it moves at a constant speed.
Question 12 [6 marks]
Atomic Structure and Radioactivity
A laboratory technician works with radioactive sources as part of their job.
Explain the difference between contamination and irradiation by a radioactive source. Describe two precautions the technician should take while handling a source and explain how at least one reduces the radiation dose received.
Question 13 [6 marks]
Magnetism and Electromagnetism
A step-down transformer has 920 turns on its primary coil and 100 turns on its secondary coil. It is connected to a 230 V a.c. mains supply, and the secondary coil supplies a current of 4.6 A to a heater element. Assume the transformer is 100% efficient (no power is wasted).
Calculate the potential difference across the secondary coil. Then, using the fact that an ideal transformer transfers power with no loss, calculate the current drawn from the 230 V primary (mains) supply.
Model solutions
| Question 1[3 marks] | |
|---|---|
| Answer or working | Marks |
| blue-shift being spectral features shifted to shorter wavelengths than their laboratory values, associated with approach | B1 |
| explaining that predominantly red-shifted distant galaxies are predominantly receding | B1 |
| explaining that widespread recession supports expansion of space, carrying galaxies apart on large scales | B1 |
| Final answer: Blue-shift is a shift of spectral features to shorter wavelengths, associated with an approaching source. Almost all distant galaxies are red-shifted, indicating widespread recession and supporting expansion of space. | |
| Question 2[4 marks] | |
|---|---|
| Answer or working | Marks |
| elastic potential energy = 1/2 x spring constant x (extension)^2 | M1 |
| substituting 0.5 x 80 x 0.15^2 | M1 |
| elastic potential energy = 0.9 | A1 |
| stating the correct unit, J | A1 |
| Final answer: 0.9 J | |
| Question 3[4 marks] | |
|---|---|
| Answer or working | Marks |
| total distance travelled by the pulse = speed x time = 1500 x 0.6 | M1 |
| total distance = 900 m | A1 |
| depth = total distance / 2, since the pulse travels to the fish and back | M1 |
| depth = 450 m | A1 |
| Final answer: 450 m | |
| Question 4[4 marks] | |
|---|---|
| Answer or working | Marks |
| stating cooling the gas decreases the average kinetic energy of the gas particles, so on average they move slower | B1 |
| stating the particles collide with the walls of the container less often per second | B1 |
| a smaller average change in particle momentum in each wall collision | B1 |
| linking the rate of momentum transfer to force on the wall, and pressure to force per unit area | B1 |
| Final answer: Cooling decreases average particle kinetic energy. Particles move slower and collide with the walls less often, with a smaller momentum change per collision. The rate of momentum transfer, hence the force on the walls and the pressure (force per unit area), decreases. | |
| Question 5[4 marks] | |
|---|---|
| Answer or working | Marks |
| converting to SI units: current = 2.5 A, flux density = 0.06 T, length = 0.4 m | M1 |
| force = magnetic flux density x current x length | M1 |
| substituting 0.06 x 2.5 x 0.4 | M1 |
| force = 0.06 N | A1 |
| Final answer: Force = 0.06 N. | |
| Question 6[4 marks] | |
|---|---|
| Answer or working | Marks |
| stating heating the gas increases the average kinetic energy of the gas particles, so on average they move faster | B1 |
| stating the particles collide with the walls of the container more often per second | B1 |
| a larger average change in particle momentum in each wall collision | B1 |
| linking the rate of momentum transfer to force on the wall, and pressure to force per unit area | B1 |
| Final answer: Heating increases average particle kinetic energy. Particles move faster and collide with the walls more often, with a larger momentum change per collision. The rate of momentum transfer, hence the force on the walls and the pressure (force per unit area), increases. | |
| Question 7[5 marks] | |
|---|---|
| Answer or working | Marks |
| after each half-life the mass halves: 96, then 48, then 24, then 12, then 6 | M1 |
| mass remaining after 4 half-lives = 6 g | A1 |
| time = number of half-lives x half-life = 4 x 3 | M1 |
| time = 12 hours | A1 |
| stating half-life is the time taken for the number of undecayed parent nuclei, mass of the parent isotope remaining, or activity to halve; accept background-corrected count rate halving with unchanged detector conditions | B1 |
| Final answer: 6 g remains after 4 half-lives, which takes 12 hours. Half-life is the time taken for the number of undecayed parent nuclei, or their activity, to halve. | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| elastic potential energy = 1/2 x spring constant x (extension)^2 | M1 |
| substituting 0.5 x 180 x 0.1^2 | M1 |
| elastic potential energy = 0.9 J | A1 |
| setting kinetic energy equal to elastic potential energy and rearranging KE = 1/2 m v^2 to v^2 = 2 x 0.9 / 0.025 (= 72) | M1 |
| speed = 8.485281374... m/s, accept 8.5 m/s (2 significant figures) or 8.49 m/s (3 significant figures) | A1 |
| Final answer: Elastic potential energy = 0.9 J; speed = 8.5 m/s (2 significant figures), using the stated complete transfer to kinetic energy. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| stating that the redshift of a galaxy's light can be used to calculate its speed of recession, how fast it is moving away | B1 |
| plotting recession speed v against independently measured distance d for many galaxies and finding the gradient H_0 in v = H_0 d | B1 |
| a constant-rate backward extrapolation giving age approximately d/v = 1/H_0, converting H_0 to reciprocal time in consistent units | B1 |
| explaining the estimate depends on uncertainty in the measurements of galaxies' distances and speeds, which are difficult to measure precisely | B1 |
| explaining the calculation also assumes the rate of expansion has been constant, when in reality the expansion rate may have changed over the universe's history, adding further uncertainty to the estimate | B1 |
| Final answer: Redshift estimates recession speed. Plot speed against independently measured galaxy distance and find the gradient H_0 in v = H_0 d. With constant-rate backward extrapolation the age estimate is d/v = 1/H_0, using consistent units. Distance/speed measurement uncertainty and changes in expansion rate make this an estimate; no numerical age follows without a measured H_0. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| total time shown on screen = 6 x 0.005 = 0.03 s | M1 |
| time period of one cycle = total time / number of cycles = 0.03 / 3 | M1 |
| time period = 0.01 s | A1 |
| frequency = 1 / time period | M1 |
| frequency = 1 / 0.01 = 100 Hz | A1 |
| Final answer: Time period = 0.01 s; frequency = 100 Hz | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| substituting 2 x pi x 7.0 x 10^6 | M1 |
| circumference = 43982297.15... m; accept 4.4 x 10^7 m (2 significant figures) or 4.40 x 10^7 m (3 significant figures) | A1 |
| speed = distance / time, using their circumference / 6000 | M1 |
| speed = 7330.382858... m/s; accept 7.3 x 10^3 m/s (2 significant figures) or 7.33 x 10^3 m/s (3 significant figures) | A1 |
| explaining that although the satellite's speed is constant, its direction is continuously changing as it moves around the circular orbit, and since velocity is a vector, this changing direction means the velocity is changing, so the satellite is accelerating | B1 |
| Final answer: Orbital speed is about 7330 m/s; the satellite accelerates because its direction, and therefore velocity, constantly changes even though its speed stays constant. | |
| Question 12[6 marks] | |
|---|---|
| Answer or working | Marks |
| stating contamination is the unwanted presence of radioactive atoms on or in an object or person (or material) | B1 |
| stating irradiation is exposure to radiation emitted by a source; it does not require radioactive material to be deposited on or in the person or object | B1 |
| stating a contaminated person continues to be exposed to radiation for as long as the radioactive atoms remain on/in them, whereas irradiation stops as soon as the source is removed or shielded | B1 |
| one suitable precaution, such as remote handling/tongs, minimising exposure time, appropriate shielding, or gloves/protective clothing to prevent contamination | B1 |
| a second distinct suitable precaution; credit any two valid methods without requiring a specific pair | B1 |
| explaining how at least one method reduces dose, such as increased distance, reduced exposure time, shielding absorbing radiation, or gloves preventing transfer of radioactive material; ordinary gloves are not general shielding | B1 |
| Final answer: Contamination is radioactive material on or in a person or object; it can continue exposing them while it remains. Irradiation is exposure to emitted radiation and stops when the external source is removed or shielded. Use tongs to increase distance and minimise handling time; suitable shielding is another option. Gloves prevent contamination rather than generally shielding penetrating radiation. | |
| Question 13[6 marks] | |
|---|---|
| Answer or working | Marks |
| using Vp / Vs = Np / Ns | M1 |
| rearranging to Vs = Vp x Ns / Np = 230 x 100 / 920 | M1 |
| Vs = 25 V | A1 |
| using power in = power out for an ideal transformer, Vp x Ip = Vs x Is; secondary power = 115 W | M1 |
| rearranging to Ip = (Vs x Is) / Vp = (25 x 4.6) / 230 | M1 |
| Ip = 0.5 A | A1 |
| Final answer: Secondary potential difference = 25 V; current drawn from the 230 V primary supply = 0.5 A. | |