Year 11 Paper 6: Whole-Course Practice
Covers energy stores and transfers, electrical circuits, domestic electricity and power, atomic structure, forces and motion, moments and elasticity, magnetism and electromagnetism, and space physics.
Year 11 follows a typical teaching order. No exam board defines what belongs to Year 11, and schools sequence the course differently. Check it against your own scheme of work before using it to decide what a class has covered.
Questions
Question 1 [4 marks]
Domestic Electricity and Power
An electric shower has a power rating of 8.5 kW and is connected to the 230 V mains supply.
Calculate the current drawn by the shower, and state, with a reason, whether a 13 A fuse would be suitable for this appliance.
Question 2 [4 marks]
Moments, Elasticity and Pressure
A spring has a natural, unstretched length of 12 cm. A force of 5 N is applied and the spring stretches to a length of 16 cm. Assume the spring obeys Hooke's law.
Calculate the spring constant of the spring, stating the units of your answer.
Question 3 [4 marks]
Magnetism and Electromagnetism
An electric motor uses the motor effect to make a coil of wire spin inside a magnetic field.
Explain, using Fleming's left-hand rule, how a current-carrying coil placed in a magnetic field experiences a turning effect, a moment, that makes it rotate.
Question 4 [5 marks]
Atomic Structure and Radioactivity
Rutherford's nuclear model, developed after the alpha particle scattering experiment, described a small, dense, positively charged nucleus with electrons somewhere around it.
Explain how Niels Bohr adapted Rutherford's nuclear model, and describe why this adapted model matched experimental observations better than Rutherford's original model.
Question 5 [5 marks]
Electrical Circuits and Components
A 15 ohm resistor and a 25 ohm resistor are connected in series with an 8 V battery.
Calculate the total resistance of the circuit, the current flowing through the circuit, and the potential difference across the 15 ohm resistor.
Question 6 [5 marks]
Energy Stores, Transfers and Conservation
A 2 kg block of copper is initially at 150 deg C and cools down, releasing 30,800 J of energy to the surroundings. The specific heat capacity of copper is 385 J/kg deg C.
Calculate the fall in temperature of the block, and hence calculate its final temperature.
Question 7 [5 marks]
Forces, Motion and Newton's Laws
A cyclist accelerates from rest and reaches a velocity of 8 m/s after 5 seconds.
Calculate the acceleration of the cyclist. The cyclist and bicycle have a combined mass of 75 kg; calculate the resultant force needed to produce this acceleration.
Question 8 [5 marks]
Space Physics
A star with a much greater mass than the Sun also spends time as a stable main sequence star, but its life cycle after this stage is very different from that of a star like the Sun.
Describe the life cycle of a star with a much greater mass than the Sun, from the main sequence stage until it forms either a neutron star or a black hole.
Question 9 [5 marks]
Atomic Structure and Radioactivity
An isotope with a half-life of 15 days is injected into an underground pipeline to detect a leak. The isotope has an initial activity of 640 MBq. The planned survey lasts several weeks.
Calculate the activity of the sample after 60 days. Then explain why an isotope with a half-life of a few weeks, rather than a few hours or several thousand years, is chosen for this purpose.
Question 10 [5 marks]
Electrical Circuits and Components
A light-dependent resistor (LDR) is connected in series with a fixed 200 ohm resistor and a 9 V battery. In bright light the LDR has a resistance of 50 ohm.
Calculate the current in the circuit in bright light. Then state and explain what happens to this current if the light dims.
Question 11 [5 marks]
Space Physics
A satellite orbits the Earth in a stable circular orbit of radius 7.0 x 10^6 m, completing one full orbit every 6000 s.
Calculate the orbital speed of the satellite, using the fact that in one orbit it travels a distance equal to the circumference of its circular orbit, 2 x pi x r. Then explain, in terms of velocity, why the satellite is accelerating even though it moves at a constant speed.
Question 12 [4 marks]
Electrical Circuits and Components
A student investigates the current against potential difference characteristic of a fixed resistor kept at constant temperature, and compares it with that of a filament lamp.
Describe the current against potential difference graphs for the fixed resistor and the filament lamp. Explain the shape of the filament lamp graph in terms of heating and the movement of particles.
Question 13 [6 marks]
Domestic Electricity and Power
Some UK homes have a residual current device (RCD) fitted in addition to fuses in the consumer unit (fuse box).
Explain how an RCD works to protect a person from an electric shock, and explain one advantage an RCD has over a fuse in this situation.
Question 14 [6 marks]
Forces, Motion and Newton's Laws
A train accelerates uniformly from 15 m/s to 35 m/s over a distance of 1000 m.
Calculate the acceleration of the train, and the time this acceleration takes.
Question 15 [6 marks]
Moments, Elasticity and Pressure
A cylindrical diving bell used by engineers has a flat horizontal roof of area 4 m^2. It is submerged so that the roof is 15 m below the surface of the sea. The density of seawater is 1030 kg/m^3, and atmospheric pressure at the surface is 101,000 Pa. Gravitational field strength g = 9.8 N/kg.
Calculate the pressure due to the sea water at a depth of 15 m, then calculate the total force pushing down on the roof of the diving bell, including the effect of atmospheric pressure.
Question 16 [6 marks]
Magnetism and Electromagnetism
A step-down transformer has 920 turns on its primary coil and 100 turns on its secondary coil. It is connected to a 230 V a.c. mains supply, and the secondary coil supplies a current of 4.6 A to a heater element. Assume the transformer is 100% efficient (no power is wasted).
Calculate the potential difference across the secondary coil. Then, using the fact that an ideal transformer transfers power with no loss, calculate the current drawn from the 230 V primary (mains) supply.
Model solutions
| Question 1[4 marks] | |
|---|---|
| Answer or working | Marks |
| current = power / potential difference | M1 |
| substituting 8500 / 230 | M1 |
| current = 37.0 A (accept 36.9-37.0 A) | A1 |
| stating a 13 A fuse is not suitable because the operating current (37 A) is greater than 13 A, so it would blow during normal use | B1 |
| Final answer: 37.0 A (36.96 A); a 13 A fuse is not suitable because the operating current exceeds 13 A. | |
| Question 2[4 marks] | |
|---|---|
| Answer or working | Marks |
| extension = 16 - 12 = 4 cm, converted to 0.04 m | M1 |
| spring constant = force / extension | M1 |
| substituting 5 / 0.04 | M1 |
| spring constant = 125 N/m | A1 |
| Final answer: 125 N/m | |
| Question 3[4 marks] | |
|---|---|
| Answer or working | Marks |
| stating a current-carrying conductor in a magnetic field experiences a force, the motor effect | B1 |
| applying Fleming's left-hand rule: first finger field (N to S), second finger conventional current, thumb force, mutually perpendicular | B1 |
| explaining that on one side of the coil the force acts in one direction, and on the opposite side of the coil, where the current flows in the opposite direction, the force acts in the opposite direction | B1 |
| explaining these two oppositely directed forces, acting on opposite sides of the coil, form a turning pair that rotates the coil | B1 |
| Final answer: Fleming's left-hand rule uses the first finger for field (N to S), second finger for conventional current and thumb for force. Opposite coil sides carry opposite currents, so experience opposite forces on different lines of action, forming a turning pair. Continuous d.c. rotation requires the current to reverse each half turn, e.g. using a split-ring commutator. No absolute rotation direction can be found without current and field directions. | |
| Question 4[5 marks] | |
|---|---|
| Answer or working | Marks |
| electrons occupying only specified shells/orbits at fixed distances (discrete energy levels) | B1 |
| stating electrons in these allowed levels do not continuously lose energy and spiral into the nucleus | B1 |
| electrons changing levels by absorbing or emitting fixed amounts of energy | B1 |
| explaining these fixed energy differences produce specific frequencies/wavelengths, matching discrete atomic line spectra | B1 |
| contrasting this with Rutherford's original model, which did not specify these allowed energy levels or explain the discrete spectra | B1 |
| Final answer: Bohr proposed electrons occupy specific shells with discrete energies and do not continuously radiate energy while in an allowed level. Changes between levels absorb or emit fixed energies, giving the discrete lines seen in atomic spectra. Rutherford's original model did not specify these allowed levels or explain the line spectra. | |
| Question 5[5 marks] | |
|---|---|
| Answer or working | Marks |
| total resistance in series = sum of the individual resistances = 15 + 25 | M1 |
| total resistance = 40 ohm | A1 |
| current = potential difference / total resistance = 8 / 40 | M1 |
| current = 0.2 A | A1 |
| potential difference across the 15 ohm resistor = current x resistance = 0.2 x 15 = 3 V | B1 |
| Final answer: Total resistance = 40 ohm; current = 0.2 A; potential difference across the 15 ohm resistor = 3 V. | |
| Question 6[5 marks] | |
|---|---|
| Answer or working | Marks |
| change in temperature = energy transferred / (mass x specific heat capacity) | M1 |
| substituting 30800 / (2 x 385) | M1 |
| change in temperature = 40 deg C | A1 |
| final temperature = 150 - 40 | M1 |
| final temperature = 110 deg C | A1 |
| Final answer: Fall in temperature = 40 deg C; final temperature = 110 deg C. | |
| Question 7[5 marks] | |
|---|---|
| Answer or working | Marks |
| acceleration = change in velocity / time | M1 |
| substituting (8 - 0) / 5 | M1 |
| acceleration = 1.6 m/s^2; average acceleration unless uniform acceleration is assumed | A1 |
| resultant force = mass x acceleration = 75 x 1.6 | M1 |
| resultant force = 120 N; average resultant force unless uniform acceleration is assumed | A1 |
| Final answer: Acceleration = 1.6 m/s^2; resultant force = 120 N These are average values; they are also constant values if acceleration is uniform. | |
| Question 8[5 marks] | |
|---|---|
| Answer or working | Marks |
| the star expanding to become a red super giant once the hydrogen in its core has mostly fused into helium | B1 |
| the star undergoing further fusion reactions, forming heavier elements, up to iron, in its core | B1 |
| the star then exploding in a supernova, a huge explosion that blows the outer layers of the star out into space | B1 |
| explaining that the core collapses when fusion can no longer provide sufficient pressure support against gravity | B1 |
| stating that the remnant becomes a neutron star, or a black hole if the remaining core mass is sufficiently large | B1 |
| Final answer: The star becomes a red supergiant and fuses progressively heavier elements up to iron. Once fusion cannot maintain core pressure support, the core collapses and a supernova expels the outer layers. The remnant becomes a neutron star or, for a sufficiently massive remaining core, a black hole. | |
| Question 9[5 marks] | |
|---|---|
| Answer or working | Marks |
| number of half-lives = 60 / 15 = 4 | M1 |
| halving the activity four times: 640, then 320, then 160, then 80, then 40 | M1 |
| activity = 40 MBq | A1 |
| stating an isotope with a half-life of only a few hours would decay away before the leak survey could be completed | B1 |
| stating an isotope with a half-life of thousands of years would remain radioactive, and hazardous, in the environment for far longer than necessary | B1 |
| Final answer: 40 MBq. A half-life of a few weeks keeps activity detectable during the stated survey. A few hours would allow activity to fall too far before it finishes, while thousands of years would leave unnecessary long-term radioactive material. Activity falls more quickly afterwards, but half-life alone does not establish safety. | |
| Question 10[5 marks] | |
|---|---|
| Answer or working | Marks |
| total resistance = 200 + 50 = 250 ohm | M1 |
| current = potential difference / total resistance | M1 |
| current = 9 / 250 = 0.036 A | A1 |
| stating the current decreases as the light dims | B1 |
| explaining the resistance of an LDR increases as light intensity decreases, so the total circuit resistance increases, decreasing the current | B1 |
| Final answer: 0.036 A in bright light; the current decreases as the light dims because an LDR's resistance increases as light intensity falls. | |
| Question 11[5 marks] | |
|---|---|
| Answer or working | Marks |
| substituting 2 x pi x 7.0 x 10^6 | M1 |
| circumference = 43982297.15... m; accept 4.4 x 10^7 m (2 significant figures) or 4.40 x 10^7 m (3 significant figures) | A1 |
| speed = distance / time, using their circumference / 6000 | M1 |
| speed = 7330.382858... m/s; accept 7.3 x 10^3 m/s (2 significant figures) or 7.33 x 10^3 m/s (3 significant figures) | A1 |
| explaining that although the satellite's speed is constant, its direction is continuously changing as it moves around the circular orbit, and since velocity is a vector, this changing direction means the velocity is changing, so the satellite is accelerating | B1 |
| Final answer: Orbital speed is about 7330 m/s; the satellite accelerates because its direction, and therefore velocity, constantly changes even though its speed stays constant. | |
| Question 12[4 marks] | |
|---|---|
| Answer or working | Marks |
| the fixed resistor having a straight I-V line through the origin | B1 |
| the lamp curve passing through the origin and becoming shallower as the magnitude of potential difference increases | B1 |
| explaining current heats the filament | B1 |
| explaining hotter lattice ions vibrate more strongly, causing more electron scattering and increased resistance | B1 |
| Final answer: The fixed resistor has a straight I-V line through the origin. The lamp curve passes through the origin and becomes shallower as the magnitude of potential difference increases. Current heats the filament; greater lattice vibrations cause more electron scattering and increased resistance. | |
| Question 13[6 marks] | |
|---|---|
| Answer or working | Marks |
| stating an RCD continuously monitors (compares) the current flowing into a circuit through the live wire and the current flowing back out through the neutral wire | B1 |
| stating that in normal use, these two currents should be equal | B1 |
| stating that if a person receives an electric shock, some current flows to earth through their body instead of back through the neutral wire, so the two currents become unequal | B1 |
| stating the RCD detects this difference and rapidly (almost instantly, within milliseconds) disconnects the circuit | B1 |
| an advantage: an RCD detects small earth-leakage currents, far below the current needed to blow the circuit fuse | B1 |
| explaining this allows the supply to be disconnected during an earth-leakage shock even when the fuse would remain intact; award for this one explained advantage | B1 |
| Final answer: An RCD compares live and neutral currents, which are equal in normal use. Leakage to earth, for example through a person, makes them unequal. When the imbalance exceeds its threshold, the RCD rapidly disconnects the circuit, limiting shock duration. It detects small leakage currents below those needed to blow a fuse, so it can disconnect during an earth-leakage shock while the fuse would remain intact. | |
| Question 14[6 marks] | |
|---|---|
| Answer or working | Marks |
| using v^2 = u^2 + 2 a s with v = 35, u = 15, s = 1000 | M1 |
| rearranging to a = (v^2 - u^2) / (2s) = (35^2 - 15^2) / (2 x 1000) | M1 |
| acceleration = 0.5 m/s^2 | A1 |
| using v = u + a t, rearranged to t = (v - u) / a | M1 |
| substituting (35 - 15) / 0.5 | M1 |
| time = 40 s | A1 |
| Final answer: Acceleration = 0.5 m/s^2; time taken = 40 s. | |
| Question 15[6 marks] | |
|---|---|
| Answer or working | Marks |
| pressure due to the water = height x density x g = 15 x 1030 x 9.8 | M1 |
| pressure due to water = 151410 Pa | A1 |
| total pressure = pressure due to water + atmospheric pressure = 151410 + 101000 | M1 |
| total pressure = 252410 Pa | A1 |
| force = pressure x area = 252410 x 4 | M1 |
| total force = 1009640 N | A1 |
| Final answer: Pressure due to water = 151410 Pa; total pressure = 252410 Pa; total force on the roof = 1009640 N (about 1.01 x 10^6 N) This is the exterior force, not the net force after any internal pressure is subtracted. | |
| Question 16[6 marks] | |
|---|---|
| Answer or working | Marks |
| using Vp / Vs = Np / Ns | M1 |
| rearranging to Vs = Vp x Ns / Np = 230 x 100 / 920 | M1 |
| Vs = 25 V | A1 |
| using power in = power out for an ideal transformer, Vp x Ip = Vs x Is; secondary power = 115 W | M1 |
| rearranging to Ip = (Vs x Is) / Vp = (25 x 4.6) / 230 | M1 |
| Ip = 0.5 A | A1 |
| Final answer: Secondary potential difference = 25 V; current drawn from the 230 V primary supply = 0.5 A. | |