Revision Library
Choose a subject
Menu
Design and Technology
Need a new topic?
Missing a topic, found a bug, or want something added?
GCSE Design & Technology · Topic guide

Product life-cycle assessment

Life-cycle assessment considers impacts across a product's life. Comparisons need matching service and clear assumptions, especially when using fictional teaching points rather than measured emissions.

GCSEDesign and TechnologyAQA

Before you start

No prerequisites. You can start here.

Method

  1. Define the service the products must provide and the period being compared.
  2. List the included stages from material supply through to end of life.
  3. Compare totals only when the service and stage boundaries match.
  4. State what the supplied data leave out and avoid turning teaching points into environmental measurements.

Worked example

A repair and a replacement both meet the same need for the same period. How should their supplied impact data be compared?

  1. Check that the comparison includes the stated impacts for each option.
  2. Compare the totals for the same service period.
  3. Explain the result only within those assumptions; invented impact points are not measured carbon emissions.

Practice questions

Q1Which life-cycle stage covers operation of a lamp in a home?Show answer

Answer: The use stage.

Got it right?
Q2Why specify a common service period?Show answer

Answer: Different lifetimes can otherwise make totals misleading.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q3Are invented impact points measured emission factors?Show answer

Answer: No. They are teaching assumptions and must be described as such.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.
Q4What can replaceable components allow a product to do?Show answer

Answer: Remain in service through repair rather than requiring replacement of the whole product.

Got it right?
Your answerWork it out on paper, then show the answer and mark yourself.

Exam-style questions

Written in the style of a GCSE Design & Technology exam paper, with a full mark scheme.

Q1[2 marks]Explain why the lowest manufacturing impact alone may not identify the lowest life-cycle impact.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?
Q2[2 marks]Explain why a repair comparison should state which stages it excludes.Show mark scheme

Tick each line you got.

Nothing ticked yet - 2 available

Got it right?

Free printable worksheet

Want more practice on paper? Download the Product life-cycle assessment worksheet pack - 5 pages of exam-style questions with a full mark scheme. Free to download, no card or account. Print it for personal and classroom use.

This topic is chapter 12 of GCSE Design and Technology Essentials, the whole course as one free printable PDF. Its worksheet is also chapter 4 of GCSE Design and Technology Topic Workbook 2 and chapter 12 of GCSE Design and Technology 10-Minute Tests, free printable practice books.

Other versions of this worksheet:

Keep going

Not quite what you needed?

Tell us what is missing on Product life-cycle assessment, or which topic to write up next.

Build a full practice pack.