Workbooks like this one, with 6 topics, 60 questions and mark schemes at the back, are usually printed and sold by publishers. This one is one of 558 free PDFs on the shelf.
Pages
22 A4 pages
Topics
6 topics
Questions
60 · 86 exam marks
Answers
From page 15
Covers
Further Mechanics
What is inside
6 topics · answers from p15
Each topic starts with a short method recap and a worked example, followed by practice questions and exam-style questions. All the answers and mark schemes are at the back, by topic, so the book works for homework, timed practice or revision.
AnswersAnswers and mark schemes for every topicp15
Explore this volume
A Level Further Maths Further Mechanics Essentials includes Further Mechanics: Momentum, Impulse and Collisions (Further Mechanics); Further Mechanics: Work, Energy and Power (Further Mechanics); Further Mechanics: Circular Motion (Further Mechanics); Further Mechanics: Elastic Strings, Springs and Elastic Energy (Further Mechanics); Further Mechanics: Momentum, Impulse and Collisions Depth (Further Mechanics); Further Mechanics: Work, Energy and Elastic Strings Depth (Further Mechanics).
Method recap - Further Mechanics: Circular Motion
Identify every force acting on the particle at the position being considered: weight mg always acts vertically down; tension, thrust or normal reaction acts along the radius (toward or away from the centre, depending on the situation).
Resolve the forces toward the centre of the circle and apply Newton's second law for circular motion: resultant force toward the centre = mv^2/r (or m*r*omega^2).
For horizontal circular motion at a fixed height (for example a conical pendulum), also resolve vertically and set the resultant to zero, since there is no vertical acceleration; solve the vertical and horizontal (centripetal) equations together.
For vertical circular motion, the component of weight toward the centre changes with position, so write the centripetal equation separately at each position of interest, being careful with the sign of mg in each.
Worked example - Further Mechanics: Circular Motion
A particle of mass 0.5 kg is attached to one end of a light inextensible string of length 0.4 m; the other end is fixed at a point O. The particle moves in a vertical circle of radius 0.4 m, centre O. Find the minimum speed of the particle at the lowest point of the circle for it to complete a full circle without the string going slack. (Take g = 9.8 m/s^2.)
At the top of the circle, the minimum condition for the string to remain taut is tension = 0, so the weight alone provides the centripetal force: mg = mv_top^2/r.
Solve for v_top^2: v_top^2 = gr = 9.8 x 0.4 = 3.92 (m/s)^2.
Use conservation of energy between the lowest and highest points; the particle rises a height of 2r = 0.8 m, and the tension does no work, since it always acts perpendicular to the velocity: (1/2)m*v_bottom^2 = (1/2)m*v_top^2 + mg(2r).
The mass m cancels: v_bottom^2 = v_top^2 + 4gr = 3.92 + 4(9.8)(0.4) = 3.92 + 15.68 = 19.6.
Solve: v_bottom = sqrt(19.6) = 7sqrt(10)/5 m/s exactly, approximately 4.43 m/s (3 s.f.).
Question 10 - Further Mechanics: Circular Motion
5 marks
A car of mass 1000 kg travels around an unbanked circular bend of radius 62.5 m at constant speed. The coefficient of friction between the car's tyres and the road is 0.4, and friction provides the full centripetal force needed. (a) Find the maximum speed at which the car can travel around the bend without skidding. (b) State one modelling assumption you have made about the car. (Take g = 9.8 m/s^2.)
Answer and mark scheme
Mark scheme for Question 10 [5 marks]
Question 10[5 marks]
Answer or working
Marks
on the flat, unbanked road, the normal reaction R = mg, since there is no vertical acceleration
1
at maximum speed, friction is at its greatest value, μ*R = μ*mg, and this equals the required centripetal force mv2/rat maximum speed, friction is at its greatest value, mu*R = mu*mg, and this equals the required centripetal force mv^2/r
v = 245 = 75 m/s, approximately 15.7 m/s (3 s.f.)v = sqrt(245) = 7sqrt(5) m/s, approximately 15.7 m/s (3 s.f.)
1
states a valid modelling assumption, for example that the car is modelled as a particle, or that the road surface is horizontal (not banked); Final answer: v = 75 m/s, approximately 15.7 m/sstates a valid modelling assumption, for example that the car is modelled as a particle, or that the road surface is horizontal (not banked); Final answer: v = 7sqrt(5) m/s, approximately 15.7 m/s
1
Question 9 - Further Mechanics: Circular Motion
8 marks
A particle of mass 0.6 kg is attached to a light inextensible string of length 0.5 m, the other end fixed at a point O, and moves in a vertical circle of radius 0.5 m about O. The particle passes through the lowest point of the circle with speed 6 m/s. (a) Show that the string does not go slack, so the particle completes a full circle. (b) Find the tension in the string when the particle is at the lowest point. (c) Find the speed of the particle at the point level with O, where the string is horizontal. (Take g = 9.8 m/s^2.)
Answer and mark scheme
Mark scheme for Question 9 [8 marks]
Question 9[8 marks]
Answer or working
Marks
uses conservation of energy from the bottom to the top, 12v_bottom2 = 12vtop^2 + g(2r), to find vtop^2uses conservation of energy from the bottom to the top, (1/2)v_bottom^2 = (1/2)v_top^2 + g(2r), to find v_top^2
compares with the minimum required vtop^2 = gr = 9.8 x 0.5 = 4.9; since 16.4 > 4.9, the string does not go slack at the top, so the particle completes the full circlecompares with the minimum required v_top^2 = gr = 9.8 x 0.5 = 4.9; since 16.4 > 4.9, the string does not go slack at the top, so the particle completes the full circle
1
at the lowest point, sets up T - mg = mv_bottom2/r, since both T and the centripetal acceleration are directed toward the centre (upward) thereat the lowest point, sets up T - mg = mv_bottom^2/r, since both T and the centripetal acceleration are directed toward the centre (upward) there
1
T = 0.6(9.8 + 36/0.5) = 0.6(9.8+72) = 0.6(81.8) = 49.08 N
1
uses conservation of energy from the bottom to the level of O, a rise of one radius: 12v_bottom2 = 12v_side2 + gruses conservation of energy from the bottom to the level of O, a rise of one radius: (1/2)v_bottom^2 = (1/2)v_side^2 + gr
v_side = 26.2, approximately 5.12 m/s (3 s.f.); Final answer: (a) vtop^2=16.4 is greater than gr=4.9, so the string stays taut; (b) T=49.08 N; (c) v is approximately 5.12 m/sv_side = sqrt(26.2), approximately 5.12 m/s (3 s.f.); Final answer: (a) v_top^2=16.4 is greater than gr=4.9, so the string stays taut; (b) T=49.08 N; (c) v is approximately 5.12 m/s
1
Method recap - Further Mechanics: Elastic Strings, Springs and Elastic Energy
Identify the natural length L and the modulus of elasticity lambda from the question; if lambda is not given directly, find it by substituting a known tension and extension into Hooke's law and rearranging.
Apply Hooke's law, T = lambda*x/L, for the tension in a stretched string or spring, where x is the current length minus the natural length.
Remember that a string can only pull: it exerts tension only while x>0 (stretched), and exerts no force at all (it is slack) whenever its length is at most its natural length. A spring can also be compressed, exerting a thrust of the same magnitude lambda*x/L outward.
Use the elastic potential energy formula EPE = lambda*x^2/(2L) for a stretched string or spring, or for a compressed spring, noting EPE depends on x^2 so is the same for an extension x as for a compression of the same size x.
Question 9 - Further Mechanics: Elastic Strings, Springs and Elastic Energy
9 marks
One end of a light elastic string of natural length 1.5 m and modulus of elasticity 24.5 N is attached to a fixed point O. A particle of mass 0.5 kg is attached to the other end, held at O, and released from rest, falling vertically. (a) Show that the maximum extension x of the string satisfies 5x^2 - 3x - 4.5 = 0, and hence find the maximum extension in exact surd form. (b) Find the speed of the particle at the instant the string first becomes taut. (Take g = 9.8 m/s^2.)
Answer and mark scheme
Mark scheme for Question 9 [9 marks]
Question 9[9 marks]
Answer or working
Marks
uses conservation of energy over the whole fall, a distance L+x: loss in GPE = gain in EPE, i.e. mg(L+x) = λ*x2/(2L)uses conservation of energy over the whole fall, a distance L+x: loss in GPE = gain in EPE, i.e. mg(L+x) = lambda*x^2/(2L)
1
substitutes the given values, 0.5(9.8)(1.5+x) = 24.5x2/3, and multiplies outsubstitutes the given values, 0.5(9.8)(1.5+x) = 24.5x^2/3, and multiplies out
1
reaches 22.05+14.7x=24.5x2, and divides by 4.9 to give 5x2-3x-4.5=0 as requiredreaches 22.05+14.7x=24.5x^2, and divides by 4.9 to give 5x^2-3x-4.5=0 as required
1
applies the quadratic formula to 5x2-3x-4.5=0 (equivalently 10x2-6x-9=0)applies the quadratic formula to 5x^2-3x-4.5=0 (equivalently 10x^2-6x-9=0)
1
x = [3+99]/10 = 3(1+11)/10, rejecting the negative root since extension cannot be negativex = [3+sqrt(99)]/10 = 3(1+sqrt(11))/10, rejecting the negative root since extension cannot be negative
1
x is approximately 1.29 m (3 s.f.)
1
recognises the string is slack while the particle falls the first 1.5 m, so it is in free fall under gravity alone over this distance
1
uses v2=u2+2gs with u=0, s=1.5: v2=2(9.8)(1.5)uses v^2=u^2+2gs with u=0, s=1.5: v^2=2(9.8)(1.5)
1
v2=29.4, so v=29.4=715/5, approximately 5.42 m/s (3 s.f.); Final answer: (a) x=3(1+11)/10 m, approximately 1.29 m; (b) v approximately 5.42 m/sv^2=29.4, so v=sqrt(29.4)=7sqrt(15)/5, approximately 5.42 m/s (3 s.f.); Final answer: (a) x=3(1+sqrt(11))/10 m, approximately 1.29 m; (b) v approximately 5.42 m/s
1
Question 10 - Further Mechanics: Elastic Strings, Springs and Elastic Energy
8 marks
A block of mass 2 kg slides along a smooth horizontal surface at 2 m/s and collides with the free end of a spring of natural length 0.5 m and modulus of elasticity 25 N; the spring's other end is fixed to a wall. (a) Find the maximum compression of the spring. (b) Find the speed of the block at the instant the spring's compression is 0.2 m, as the block rebounds away from the wall.
Answer and mark scheme
Mark scheme for Question 10 [8 marks]
Question 10[8 marks]
Answer or working
Marks
at maximum compression the block is momentarily at rest, so all its initial kinetic energy has converted to elastic potential energy: 12(2)(22) = 25xmax^2/(2x0.5)at maximum compression the block is momentarily at rest, so all its initial kinetic energy has converted to elastic potential energy: (1/2)(2)(2^2) = 25x_max^2/(2x0.5)
1
simplifies to 4 = 25xmax^2simplifies to 4 = 25x_max^2
1
xmax^2 = 4/25 = 0.16x_max^2 = 4/25 = 0.16
1
xmax = 0.4 mx_max = 0.4 m
1
uses conservation of energy from the start to the point of compression 0.2 m: initial KE = KE at that point + EPE at that point
1
EPE at x=0.2: 25(0.2)2/(2x0.5) = 25(0.04)/1 = 1 JEPE at x=0.2: 25(0.2)^2/(2x0.5) = 25(0.04)/1 = 1 J
1
12(2)v2 = 4-1 = 3, so v2=3(1/2)(2)v^2 = 4-1 = 3, so v^2=3
1
v = 3, approximately 1.73 m/s (3 s.f.); Final answer: (a) maximum compression = 0.4 m; (b) v = 3, approximately 1.73 m/sv = sqrt(3), approximately 1.73 m/s (3 s.f.); Final answer: (a) maximum compression = 0.4 m; (b) v = sqrt(3), approximately 1.73 m/s
Decision Maths: Algorithms, Sorting and Bin Packing, Decision Maths: Graphs, Trees and Minimum Spanning Trees, Decision Maths: Shortest Paths and Route Inspection and 3 more
Further Statistics: Discrete Random Variables and Expectation, Further Statistics: Poisson and Geometric Distributions, Further Statistics: Chi-Squared Tests (Goodness of Fit and Contingency Tables) and 3 more