Worked question 8 - Further Mechanics: Work, Energy and Elastic Strings Depth
Key results: work-energy principle, elastic strings/springs and circular motion
Original content written for Revision Library.
Unless a question states otherwise, take g = 9.8 m/s^2, model each object as a particle, and treat every string or spring as light; strings are inextensible while rods are light and rigid. This worksheet is a depth paper combining three areas of Further Mechanics, momentum, impulse and collisions are assumed known from elsewhere and are not the focus here: the work-energy principle, elastic strings and springs, and circular motion, and several questions require you to combine two of these ideas within a single question. Kinetic energy is KE = (1/2)*m*v^2 and gravitational potential energy relative to a reference level is GPE = m*g*h; the work-energy principle states that the total work done by all the forces acting on a particle (including work done against resistances such as friction) equals its change in kinetic energy. Hooke's law states that the tension (or thrust) in an elastic string or spring of natural length l and modulus of elasticity lambda, when extended (or compressed) by x, has magnitude T = lambda*x/l, and the elastic potential energy stored is EPE = lambda*x^2/(2*l); an elastic string can only pull, and goes slack once its length is less than l, whereas a spring can both pull and push. For a particle moving on a circle of radius r with angular speed omega, the linear speed is v = r*omega and the centripetal acceleration, directed towards the centre, has magnitude a = v^2/r = r*omega^2; for a conical pendulum, or a vehicle on a banked track, resolve forces vertically and horizontally to link the tension or normal reaction to the speed. For vertical circular motion, combine Newton's second law in the radial direction with energy conservation; for a particle on a string, or on the inside of a smooth track, the critical condition is that the tension or normal reaction is zero, whereas a particle threaded on a rigid rod can maintain circular motion even when this condition would otherwise be violated, in which case the rod is in thrust (compression) rather than tension.
Answer and mark scheme
Question 8
| Credit | Answer or working |
|---|---|
| M1 | (a) correct formula EPE = λ*x2/(2*l) with x = 0.3 - 0.15 = 0.15 m |
| M1 | (a) correct substitution: 48*0.152/(2*0.3) |
| A1 | (a) EPE = 1.8 J, cao |
| M1 | (b) uses (1/2)*m*v2 = EPE, ft (a) |
| A1 | (b) v = √18 = awrt 4.24 m/s, cao |
| M1 | (c) states the critical condition at the top of the loop: the normal reaction N = 0, so vtop2 = g*r |
| M1 | (c) uses energy conservation between the bottom and top of the loop (height 2r) to write the corresponding minimum speed at the bottom: v_bottom(min)2 = g*r + 2*g*(2r) = 5*g*r |
| A1 | (c) 5*g*r = 5*9.8*0.35 = 17.15, so the minimum speed-squared at the bottom is 17.15 (m/s)2 |
| A1 | (c) compares with the actual value found in (b), v2 = 18 > 17.15, so P has more than enough speed and maintains contact with the track throughout the loop, cso |
| M1 | (d) uses energy conservation from bottom to top: vtop2 = v_bottom2 - 2*g*(2r), ft (b) |
| A1 | (d) vtop = awrt 2.07 m/s |
| M1 | (d) Newton's second law towards the centre (downward) at the top: mg + N = m*vtop2/r, ft their vtop |
| A1 | (d) N = awrt 0.486 N, cao |
- (a) Answer: EPE = 1.8 J
- (b) Answer: v = awrt 4.24 m/s
- (c) Answer: Minimum v_bottom2 = 17.15; since 18 > 17.15, P maintains contact throughout the loop
- (d) Answer: vtop = awrt 2.07 m/s; N = awrt 0.486 N





