A Level Geography flashcards
Water and carbon cycles, coasts, hazards, global systems, places, population and fieldwork. 75 cards across 8 topics, each with its answer.
Water and Carbon Cycles
- 1
What is a drainage basin?
Answer: The area of land drained by a river and its tributaries, marked by a ridge of high land called the watershed.
- 2
Name the main stores in the water (hydrological) cycle.
Answer: Oceans, ice sheets and glaciers, groundwater, lakes and rivers, soil moisture, and the atmosphere.
Worked example: Oceans hold the largest store by far, over 96 percent of all water on Earth.
- 3
Define evapotranspiration.
Answer: The combined loss of water to the atmosphere by evaporation from surfaces and transpiration from plants.
- 4
What is the water balance (budget) of a drainage basin?
Answer: The balance between water inputs, mainly precipitation, and outputs, mainly evapotranspiration and runoff, over a given time period.
Worked example: In the UK, precipitation typically exceeds evapotranspiration in winter, producing a soil moisture surplus.
- 5
Define infiltration and interception.
Answer: Infiltration is water soaking into the soil from the surface; interception is precipitation caught by vegetation before it reaches the ground.
- 6
Name the main stores in the global carbon cycle.
Answer: The atmosphere, the oceans, the terrestrial biosphere (vegetation and soil), and the lithosphere (rock and fossil fuels).
Worked example: The lithosphere is the largest store, holding carbon for millions of years in rock such as limestone.
- 7
Distinguish a fast carbon cycle flux from a slow one.
Answer: Fast fluxes, such as photosynthesis and respiration, move carbon over days to years; slow fluxes, such as rock weathering and fossil fuel formation, take thousands to millions of years.
- 8
Define carbon sequestration.
Answer: The capture and long-term storage of atmospheric carbon dioxide, for example by photosynthesis in forests or by dissolving into ocean water.
- 9
Why does burning fossil fuels disturb the carbon cycle?
Answer: It releases carbon that was stored in the lithosphere over millions of years into the atmosphere within a very short time, increasing the flux into the fast carbon cycle.
Coastal Systems and Landforms
- 1
Name the four processes of coastal erosion.
Answer: Hydraulic action, abrasion, attrition and solution (corrosion).
- 2
Define longshore drift.
Answer: The movement of sediment along a coast in a zigzag path, caused by waves approaching at an angle (swash) and returning straight down the beach under gravity (backwash).
- 3
Put these landforms in the order erosion of a headland creates them: stack, arch, cave, stump.
Answer: Cave, then arch, then stack, then stump.
Worked example: Erosion widens a weakness into a cave; the cave is cut through to form an arch; the arch roof collapses leaving a stack; the stack erodes down to a stump.
- 4
What is a spit?
Answer: A narrow beach of sand or shingle projecting from the coast into the sea or across a river mouth, built by longshore drift and often curved at the end by wave refraction.
- 5
What is a tombolo?
Answer: A beach or spit of sand or shingle that connects the mainland to an offshore island.
- 6
Name the four main types of coastal mass movement.
Answer: Rockfall, landslide, mudflow and rotational slip (slumping).
- 7
What is a sediment cell?
Answer: A stretch of coastline, usually bounded by features such as headlands, within which sediment movement (erosion, transport and deposition) is largely self-contained.
- 8
Compare constructive and destructive waves.
Answer: Constructive waves have a strong swash and weak backwash, low frequency (6-8 per minute) and build beaches; destructive waves have a weak swash and strong backwash, high frequency (11-15 per minute) and erode beaches.
- 9
Distinguish eustatic from isostatic sea level change.
Answer: Eustatic change is a change in the actual volume of water in the oceans, for example ice melting; isostatic change is a change in the level of the land itself relative to the sea, for example post-glacial rebound.
Hazards
- 1
Name the three types of plate boundary and the plate movement at each.
Answer: Constructive (plates move apart), destructive/convergent (plates move together) and conservative (plates slide past each other).
- 2
What happens where an oceanic plate meets a continental plate at a destructive boundary?
Answer: The denser oceanic plate is subducted beneath the continental plate, forming an ocean trench, a subduction zone and explosive composite volcanoes.
- 3
What do the Richter scale and the Moment Magnitude Scale (Mw) measure?
Answer: Both measure earthquake magnitude on a logarithmic scale; Richter uses wave amplitude from seismographs, while Mw, now more widely used, measures the total energy released from fault area and slip.
- 4
What is liquefaction?
Answer: A process where intense shaking causes water-saturated soil to lose strength and behave like a liquid, making buildings sink, tilt or collapse.
- 5
Distinguish a shield volcano from a composite volcano.
Answer: A shield volcano has gentle slopes built from frequent, runny basaltic lava; a composite volcano has steep slopes built from alternating layers of viscous lava and ash, and erupts more violently.
Worked example: Shield volcanoes form over hotspots or at constructive boundaries; composite volcanoes form at destructive boundaries.
- 6
What is a pyroclastic flow?
Answer: A fast-moving, extremely hot current of gas, ash and rock fragments that flows down a volcano's slopes during an explosive eruption.
- 7
State the conditions needed for a tropical cyclone to form.
Answer: Sea surface temperature above about 26.5 degrees Celsius to a depth of 50m, latitude at least 5 degrees from the equator, low wind shear, and a pre-existing disturbance with high humidity.
- 8
What is the eye of a tropical cyclone?
Answer: The calm, low-pressure centre of the storm, typically 30-60km wide, with light winds and little cloud, surrounded by the eyewall where winds and rain are most intense.
- 9
Distinguish a hazard from a disaster.
Answer: A hazard is a potential threat to life and property; a disaster occurs when a hazard's impacts overwhelm a community's ability to cope.
- 10
What does the Park model show?
Answer: How quality of life in an area changes after a hazard event, through relief, rehabilitation and reconstruction, and how preparedness affects the speed of recovery.
Globalisation and Global Governance
- 1
Define globalisation.
Answer: The increasing interconnectedness and interdependence of countries and people worldwide through flows of trade, capital, people, information and culture.
- 2
Name the four main flows that drive globalisation.
Answer: Flows of capital (money and investment), labour (migration), products (trade) and information (data and ideas).
- 3
What is a transnational corporation (TNC)?
Answer: A company that operates and has production facilities in more than one country, often headquartered in one country with operations spread across others.
- 4
Distinguish outsourcing from offshoring.
Answer: Outsourcing is contracting work out to another company; offshoring is relocating a business function or production to another country, often to cut costs.
- 5
Define global governance.
Answer: The collective management of shared global issues, such as trade, the environment and human rights, through international institutions, agreements and laws rather than by a single government.
- 6
Name three institutions of global economic governance.
Answer: The World Trade Organization (WTO), the International Monetary Fund (IMF) and the World Bank.
- 7
What is a trade bloc? Give an example.
Answer: A group of countries that agree to reduce or remove trade barriers between members, for example the European Union (EU).
- 8
Name two international agreements on global environmental governance.
Answer: The Paris Agreement (2015) on climate change, and the Montreal Protocol (1987) on ozone-depleting substances.
- 9
Define time-space compression.
Answer: The sense that the world is 'shrinking' as improvements in transport and communications technology reduce the time it takes to travel or communicate across distance.
Superpowers
- 1
Define a superpower.
Answer: A state with the political, economic, cultural and military power to project dominant influence globally, not just regionally.
- 2
Name the main sources (attributes) of a country's power.
Answer: Economic strength, military strength, political influence, resource control, demographic size, cultural influence (soft power) and territorial size.
- 3
Distinguish hard power from soft power.
Answer: Hard power is influence through military force or economic coercion; soft power is influence through attraction and persuasion, such as culture, diplomacy and values.
- 4
What is a hegemon?
Answer: A single dominant superpower with significant influence over the political, economic and cultural direction of the rest of the world.
- 5
What does the core-periphery model describe?
Answer: A dominant 'core' of powerful states holding most of the world's economic and political power over a less powerful 'periphery'.
- 6
What is an emerging superpower? Give a widely cited example.
Answer: A country whose economic and political power is rapidly growing towards superpower status; China is the most widely cited example.
- 7
What does the acronym BRICS stand for?
Answer: Brazil, Russia, India, China and South Africa: a group of major emerging economies.
- 8
Give two ways superpowers exert geopolitical influence.
Answer: Membership and voting power in international institutions, such as a UN Security Council veto, and providing aid, loans or investment to other states.
- 9
Distinguish a unipolar, bipolar and multipolar world order.
Answer: Unipolar: one dominant superpower; bipolar: two competing superpowers; multipolar: several powers of roughly comparable global influence.
Changing Places and Urban Environments
- 1
Define place, in human geography.
Answer: A location given meaning and identity by human experience, memory, activity and emotional attachment, not just its physical location.
- 2
Distinguish an insider's view of a place from an outsider's view.
Answer: An insider's view comes from lived experience and belonging to a place; an outsider's view is formed by someone without that direct lived experience, for example through the media.
- 3
What is a far place, in the study of changing places?
Answer: A place experienced indirectly, for example through the media, the internet or the accounts of others, rather than through direct physical experience.
- 4
Define regeneration, in an urban context.
Answer: The long-term improvement of a run-down area through investment in its economy, environment and social conditions.
- 5
Define gentrification.
Answer: The process by which a run-down urban area is improved by the arrival of wealthier residents and businesses, often raising property prices and displacing poorer, existing residents.
- 6
Define counter-urbanisation.
Answer: The movement of people away from large cities to smaller towns and rural areas.
- 7
What is a suburbanised (commuter) village?
Answer: A village near a city that has grown through the in-migration of commuters, gaining new housing and services while often losing its original rural character.
- 8
Define urban sprawl.
Answer: The uncontrolled outward expansion of a city's built-up area into the surrounding countryside.
- 9
What is a greenbelt?
Answer: A zone of protected, largely undeveloped land around a city, designated to prevent urban sprawl and preserve open countryside.
- 10
What is the urban heat island effect?
Answer: The tendency for a city to be measurably warmer than its surrounding rural area, caused by heat-absorbing surfaces, waste heat from buildings and traffic, and reduced vegetation.
Population and Health
- 1
What does the Demographic Transition Model (DTM) show?
Answer: How a country's birth rate, death rate and total population change over time as it develops, typically through five stages.
- 2
What characterises Stage 2 of the Demographic Transition Model?
Answer: Death rate falls rapidly, due to improved healthcare, food supply and sanitation, while birth rate stays high, causing rapid natural population growth.
- 3
Define dependency ratio.
Answer: The ratio of the economically dependent population (under 15 and over 64) to the economically active population (15 to 64), usually expressed per 100 working-age people.
- 4
What is an epidemiological transition?
Answer: A shift in the main causes of death and illness in a population, typically from infectious and parasitic diseases towards chronic and degenerative diseases, as a country develops.
- 5
Distinguish a communicable disease from a non-communicable disease.
Answer: A communicable disease is infectious and can be transmitted between people; a non-communicable disease cannot be transmitted between people, such as heart disease or cancer.
- 6
Define life expectancy and infant mortality rate.
Answer: Life expectancy is the average number of years a person is expected to live from birth; infant mortality rate is the number of deaths of infants under one year old per 1,000 live births per year.
- 7
Define a pandemic.
Answer: An outbreak of an infectious disease that has spread across multiple countries or continents, affecting a large number of people.
- 8
Name the three components of the epidemiological (disease) triangle.
Answer: The agent (pathogen), the host (the person or population affected) and the environment (conditions that bring agent and host together).
- 9
What population pyramid shape does a youthful population structure typically produce?
Answer: A wide base that narrows sharply towards the top, reflecting a high birth rate and a large proportion of young people.
Fieldwork and Statistical Methods
- 1
Distinguish primary data from secondary data.
Answer: Primary data is collected first-hand by the researcher; secondary data has already been collected and published by someone else.
- 2
Distinguish quantitative data from qualitative data.
Answer: Quantitative data is numerical and can be measured or counted; qualitative data is descriptive, based on opinions, feelings or observations, and is not purely numerical.
- 3
Define random sampling.
Answer: A sampling method where every item or location in the study area has an equal chance of being selected, often using random number generation.
- 4
Define systematic sampling.
Answer: A sampling method where data points are selected at regular, fixed intervals, for example every 10 metres along a transect.
- 5
Define stratified sampling.
Answer: A sampling method where the population or area is divided into subgroups (strata), and samples are taken from each subgroup in proportion to its size.
- 6
What does Spearman's rank correlation test, and what do results near +1 and -1 mean?
Answer: It tests the strength and direction of a relationship between two ranked data sets; a result near +1 means a strong positive correlation, near -1 a strong negative correlation, and near 0 means little or none.
- 7
What sample size does Spearman's rank correlation normally require?
Answer: At least 10 pairs of data; results become unwieldy to calculate by hand above about 30 pairs.
- 8
What does a chi-squared test assess, and what data type does it need?
Answer: Whether there is a significant difference between an observed set of frequencies and the frequencies expected by chance; it needs data as frequencies (counts) in categories, not measurements.
- 9
Define a null hypothesis.
Answer: A statement predicting there is no significant relationship or difference between the variables being tested, which a statistical test can reject or fail to reject.
- 10
State the formula for percentage change.
Answer: Percentage change = ((new value - old value) / old value) x 100.