ESAT flashcards
Standalone multiple-choice practice from existing ESAT questions. 96 cards across 24 topics, each with its answer.
Cells, membranes and transport
- 1
Which of the following is an example of a tissue, rather than a cell, an organ or an organ system? A. The stomach B. Muscular tissue in the wall of the stomach C. The digestive system D. A red blood cell
Answer: B. Muscular tissue in the wall of the stomach The levels of organisation, from simplest to most complex, are cells, tissues, organs, and organ systems. A red blood cell is a single cell, below the level of a tissue. Muscular tissue is a group of similar cells (muscle cells) working together, which is the definition of a tissue. The stomach is an organ, built from several different tissues, including muscular tissue, working together, and the digestive system is an organ system built from organs including the stomach. Therefore the answer is B.
- 2
A couple plan to have two children. Assuming each pregnancy is independent and each child is equally likely to be male or female, what is the probability that both children are female? A. 1/2 B. 1/3 C. 1/8 D. 1/4
Answer: D. 1/4 Each child is independently equally likely to be male or female, with probability 1/2 each. The probability of both children being female is the product of the two independent probabilities: 1/2 x 1/2 = 1/4. Therefore the answer is D.
- 3
A single-celled organism reproduces asexually by mitotic division, and each division doubles the number of cells present. Starting from a single cell, how many cells are present after 4 successive divisions? A. 8 B. 16 C. 4 D. 32
Answer: B. 16 Starting from 1 cell, each mitotic division doubles the number of cells present. After 1 division: 2 cells. After 2 divisions: 4 cells. After 3 divisions: 8 cells. After 4 divisions: 16 cells. This is 2^4 = 16. Therefore the answer is B.
- 4
A student compares a plant cell and an animal cell under a microscope. Which structure is found in the plant cell but not in the animal cell, and is the site where photosynthesis takes place? A. Mitochondrion B. Chloroplast C. Nucleus D. Cell membrane
Answer: B. Chloroplast The question needs a structure that is both plant-only and the site of photosynthesis. Mitochondria and nuclei appear in both plant and animal cells, so neither can be the plant-only answer. The cell membrane is common to essentially all cell types and is not where photosynthesis happens. The chloroplast is described in the specification as plant-only, and it is the structure where photosynthesis takes place. Therefore the answer is B.
Ecosystems and plant physiology
- 1
In a potometer experiment, a leafy shoot takes up 0.9 cm^3 of water in 6 minutes. What is the rate of transpiration, expressed in cm^3 of water per hour? A. 9 cm^3 per hour B. 54 cm^3 per hour C. 0.0025 cm^3 per hour D. 0.15 cm^3 per hour
Answer: A. 9 cm^3 per hour The rate of transpiration is the volume of water taken up divided by the time taken: 0.9 cm^3 / 6 minutes = 0.15 cm^3 per minute. There are 60 minutes in an hour, so converting this rate to cm^3 per hour means multiplying by 60: 0.15 x 60 = 9 cm^3 per hour. The other options come from common slips: multiplying the raw volume by 60 without first finding the per-minute rate (54), dividing instead of multiplying when converting units (0.0025), or forgetting to convert the per-minute rate into a per-hour rate at all (0.15). Only 9 cm^3 per hour correctly completes both the division and the unit conversion, so A is correct.
- 2
Which sequence correctly lists the levels of biological organisation within an ecosystem, from smallest to largest? A. Organism, population, community, ecosystem B. Population, organism, community, ecosystem C. Organism, community, population, ecosystem D. Community, population, organism, ecosystem
Answer: A. Organism, population, community, ecosystem The levels of organisation build up from the smallest unit to the largest: an organism is a single individual living thing. A population is all the organisms of one species living in the same area at the same time, so it is built from many organisms. A community is all the different populations (of different species) living and interacting in the same area. An ecosystem is a community together with the non-living, abiotic parts of its environment, such as soil, water and climate, so it is the largest and most inclusive level. Putting these together from smallest to largest gives organism, population, community, ecosystem, so A is correct.
- 3
A population of deer numbers 800 individuals in year 1. In year 2, an outbreak of a parasitic disease, a biotic factor, causes the population to fall by 25%. In year 3, the disease causes a further fall of 20% of the year 2 population. What is the deer population in year 3? A. 320 B. 600 C. 440 D. 480
Answer: D. 480 A biotic factor is a living factor, such as disease, predation or competition, that affects population size; this disease outbreak is one example. The year 2 population is 800 reduced by 25%: 800 x 0.75 = 600. The year 3 fall is 20% of the year 2 population, 600, not of the original 800, so the fall is 600 x 0.2 = 120. The year 3 population is therefore 600 minus 120, which is 480. So the correct answer is D, 480.
- 4
Which combination of environmental conditions would produce the HIGHEST rate of transpiration from a leafy shoot? A. Bright light, still air, high humidity, low temperature B. Bright light, moving air, low humidity, high temperature C. Bright light, still air, low humidity, high temperature D. Dim light, still air, high humidity, low temperature
Answer: B. Bright light, moving air, low humidity, high temperature The rate of transpiration is increased by higher light intensity, which opens stomata wider, greater air movement, which removes water vapour from around the leaf and maintains a steep diffusion gradient, lower humidity, which also steepens the diffusion gradient out of the leaf, and higher temperature, which increases the kinetic energy and evaporation rate of water molecules. Option B combines all four of these conditions in the direction that increases transpiration: bright light, moving air, low humidity and high temperature. Every other option is missing at least one of these four conditions, or has one of them working in the opposite direction, so each produces a lower rate than B. So the highest rate of transpiration is produced by the conditions in B.
Enzymes and animal physiology
- 1
An enzyme-catalysed reaction is being studied within its normal working range, below its optimum temperature. Across this range, the rate of reaction obeys the rule that it doubles for every 10 degrees C rise in temperature. At 15 degrees C the rate of reaction is 3 units. Using this rule, what is the rate of reaction at 45 degrees C? A. 24 units B. 12 units C. 48 units D. 33 units
Answer: A. 24 units From 15 degrees C to 45 degrees C is a rise of 30 degrees C. Applying the doubling rule, a 30 degree C rise corresponds to 30 / 10 = 3 separate 10 degree C steps, so the rate doubles three times, not two or four times. Starting at 3 units: after the first doubling (to 25 degrees C) the rate is 6 units; after the second doubling (to 35 degrees C) it is 12 units; after the third doubling (to 45 degrees C) it is 24 units. So the rate at 45 degrees C is 3 x 2^3 = 3 x 8 = 24 units, matching option A.
- 2
A person accidentally touches a very hot object and withdraws their hand before feeling pain. Which sequence correctly places the components of the reflex arc in the order the nerve impulse travels? A. Receptor -> sensory neurone -> relay neurone -> motor neurone -> effector. B. Receptor -> motor neurone -> relay neurone -> sensory neurone -> effector. C. Receptor -> relay neurone -> sensory neurone -> motor neurone -> effector. D. Effector -> sensory neurone -> relay neurone -> motor neurone -> receptor.
Answer: A. Receptor -> sensory neurone -> relay neurone -> motor neurone -> effector. A receptor (here, a pain/heat receptor in the skin) detects the stimulus and generates a nerve impulse. A sensory neurone carries that impulse from the receptor towards the central nervous system (brain and spinal cord). Inside the spinal cord, a relay neurone connects the sensory neurone to a motor neurone, allowing a fast response without waiting for the brain to process the sensation. The motor neurone carries the impulse out to an effector (a muscle), which contracts to withdraw the hand, giving the order receptor, sensory neurone, relay neurone, motor neurone, effector, as in option A.
- 3
A student sets up four test tubes, each containing a different food sample mixed with one digestive enzyme, and tests each mixture with Benedict's test for reducing sugar before and after the enzyme has acted. In which test tube would you expect the Benedict's test result to change from negative (stays blue) to positive (brick-red precipitate) after the enzyme has acted? A. Egg white (protein) mixed with protease. B. Starch solution mixed with amylase. C. Vegetable oil mixed with lipase. D. Starch solution mixed with protease.
Answer: B. Starch solution mixed with amylase. Starch itself does not give a positive Benedict's test, since it is not a reducing sugar, so the starch-plus-amylase tube starts negative. Amylase hydrolyses starch into shorter sugar units, including maltose and glucose, which are reducing sugars. Once amylase has acted, the same tube now contains reducing sugars where it previously did not, so its Benedict's test result changes from negative to positive. The other three combinations either use the wrong enzyme for starch (D), or use a food and enzyme pair that never produces a reducing sugar in the first place (A, C), so only B shows the negative-to-positive change described.
- 4
A student is asked to summarise what enzymes are and how they work in general terms, before studying particular examples. Which statement most accurately describes enzymes? A. Enzymes are lipids that lower the activation energy of a reaction and are broken down in the process. B. Enzymes are proteins that act as biological catalysts, speeding up reactions without being used up themselves. C. Enzymes are carbohydrate polymers that provide the energy needed to drive metabolic reactions forward. D. Enzymes are proteins that are permanently changed by each reaction they catalyse, so a fresh molecule is needed for every reaction.
Answer: B. Enzymes are proteins that act as biological catalysts, speeding up reactions without being used up themselves. An enzyme's identity is set by its molecular class: enzymes are proteins, built from folded chains of amino acids, not carbohydrates or lipids. A biological catalyst speeds up the rate of a reaction by providing an alternative pathway with a lower activation energy. A defining property of any catalyst, biological or otherwise, is that it is not used up or permanently changed by the reaction it catalyses, so the same enzyme molecule can be reused many times. Only option B combines both facts correctly: protein structure, and catalytic (not consumed) behaviour, so B is correct.
Genetics, DNA and inheritance
- 1
A section of a gene contains 300 nucleotide bases on the coding strand, ignoring any start or stop signals. How many amino acids could this section code for? A. 300 B. 900 C. 100 D. 150
Answer: C. 100 Spec B5.3 states that nucleotide bases in a gene are read as triplets, with each triplet of three bases coding for one amino acid. To find the number of amino acids coded for, divide the number of bases by 3. 300 divided by 3 is 100, so this section of the gene could code for a chain of 100 amino acids. The answer is C, 100 amino acids.
- 2
In a molecule of double-stranded DNA, thymine makes up 22 per cent of all the bases. This DNA molecule contains 5000 bases in total. How many of these bases are guanine? A. 2800 B. 1100 C. 2200 D. 1400
Answer: D. 1400 In double-stranded DNA, adenine pairs with thymine and guanine pairs with cytosine, so A equals T and G equals C in amount (spec B5.2). If T is 22 per cent, then A is also 22 per cent, so A and T together make up 44 per cent of all bases, leaving 56 per cent for G and C combined. Since G equals C, each makes up half of that 56 per cent, so G is 28 per cent of all the bases. 28 per cent of the 5000 total bases is 1400, so the number of guanine bases is 1400, answer D.
- 3
A sample of double-stranded DNA is analysed and found to contain 30 per cent adenine bases. What percentage of the bases in this sample are guanine? A. 30 per cent B. 20 per cent C. 40 per cent D. 70 per cent
Answer: B. 20 per cent In double-stranded DNA, adenine pairs with thymine and guanine pairs with cytosine, so the amount of A equals the amount of T, and the amount of G equals the amount of C (spec B5.2). If A is 30 per cent, then T must also be 30 per cent, so A and T together make up 60 per cent of all bases. The remaining 40 per cent of bases must be G and C combined, and since G equals C, each makes up half of that 40 per cent. So G is 20 per cent, answer B.
- 4
Humans have 46 chromosomes arranged in 23 pairs. One of these pairs differs in size and shape between males and females. Which term describes the other 22 pairs, which are identical in type between the two sexes? A. Alleles B. Genotypes C. Gametes D. Autosomes
Answer: D. Autosomes Spec B4.2 lists 'autosome' among the genetic terms candidates must know. An autosome is any chromosome that is not one of the sex chromosomes. In humans, 22 of the 23 pairs are autosomes, identical in type between males and females; the remaining pair (XX or XY) determines sex. So the term for these 22 shared pairs is autosomes, answer D.
Acids, rates and energetics
- 1
A solution of hydrochloric acid has pH 2. It is diluted until its pH becomes 4. By what factor has the H+ ion concentration decreased? A. A factor of 2 B. A factor of 4 C. A factor of 100 D. A factor of 10
Answer: C. A factor of 100 On the pH scale, a change of 1 corresponds to a change in H+ ion concentration by a factor of 10. Here the pH changes from 2 to 4, an increase of 2 pH units. So the H+ ion concentration decreases by a factor of 10 x 10 = 100. The H+ concentration has therefore decreased by a factor of 100, option C.
- 2
A concentrated acid has pH 1. It is diluted with water until its H+ ion concentration has fallen to one thousandth (1/1000) of its original value. What is the pH of the diluted solution? A. pH 4 B. pH 1000 C. pH 3 D. pH -2
Answer: A. pH 4 A change of 1 on the pH scale corresponds to a change in H+ ion concentration by a factor of 10, so a fall in concentration to 1/1000 of its original value is a fall by a factor of 10 x 10 x 10. A factor of 10^3 in the H+ concentration corresponds to a change of 3 pH units. Diluting an acid lowers its H+ concentration, so its pH increases: new pH = original pH + 3 = 1 + 3. So the diluted solution has pH 4, option A.
- 3
Zinc metal is added to dilute sulfuric acid. Which set of products correctly results from this reaction? A. Zinc sulfate, water and carbon dioxide. B. Zinc sulfate and hydrogen gas. C. Zinc oxide and sulfur dioxide. D. Zinc sulfite and hydrogen.
Answer: B. Zinc sulfate and hydrogen gas. A reactive metal reacts with a dilute acid to form a salt and hydrogen gas. Zinc is a reactive metal and sulfuric acid is a dilute acid here, so the products are a salt, zinc sulfate, and hydrogen gas: Zn + H2SO4 -> ZnSO4 + H2. This is different from a carbonate reacting with an acid, which instead produces a salt, water and carbon dioxide, since zinc is a metal, not a carbonate. So the correct products are zinc sulfate and hydrogen gas, option B.
- 4
In a calorimetry experiment, a reaction transfers 1680 J of energy to 100 g of water. The specific heat capacity of water is 4.2 J per gram per degree C. Calculate the temperature rise of the water. A. 400 degrees C B. 4 degrees C C. 16.8 degrees C D. 0.25 degrees C
Answer: B. 4 degrees C Specific heat capacity is defined as energy transferred divided by (mass x temperature change), so temperature change = energy transferred / (mass x specific heat capacity). Here energy transferred = 1680 J, mass = 100 g, specific heat capacity = 4.2 J per gram per degree C. Mass x specific heat capacity = 100 x 4.2 = 420, so temperature change = 1680 / 420. 1680 / 420 = 4, so the temperature rise of the water is 4 degrees C, option B.
Chemical analysis and the atmosphere
- 1
An unknown solid salt is held in a blue Bunsen flame on a clean nichrome wire. The flame turns lilac. Which metal ion is most likely present in the salt? A. Lithium B. Sodium C. Calcium D. Potassium
Answer: D. Potassium A flame test colour is characteristic of the metal ion present in the salt. A lilac flame is the characteristic colour for potassium ions. Lithium, sodium and calcium each give a different colour (crimson red, yellow-orange and red-orange respectively), so none of them match the lilac flame observed. So the salt most likely contains potassium, which is option D.
- 2
A solution of an unknown potassium halide is tested by first adding dilute nitric acid and then adding aqueous silver nitrate. A cream precipitate forms. Which halide ion is present in the solution? A. Chloride B. Bromide C. Iodide D. Sulfate
Answer: B. Bromide Dilute nitric acid is added first to remove any carbonate ions, which could otherwise also give a precipitate with silver nitrate and confuse the result. Aqueous silver nitrate then reacts with a halide ion to give a silver halide precipitate: chloride gives white, bromide gives cream, and iodide gives yellow. A cream precipitate therefore identifies bromide ions, which is option B.
- 3
A colourless gas is bubbled through limewater, which turns cloudy. When a lit splint is held in a separate sample of the same gas, the splint is extinguished rather than relit or ignited. Which gas is being tested? A. Oxygen B. Hydrogen C. Carbon dioxide D. Chlorine
Answer: C. Carbon dioxide Carbon dioxide is identified using the limewater test: bubbling the gas through limewater (aqueous calcium hydroxide) turns it cloudy because insoluble calcium carbonate forms. Carbon dioxide also does not support combustion, so a lit splint held in it goes out, unlike oxygen (which relights a glowing splint) or hydrogen (which pops). Both observations, cloudy limewater and an extinguished splint, point to carbon dioxide, which is option C.
- 4
Dilute sulfuric acid is electrolysed using inert electrodes. The gas collected at the anode (positive electrode) is tested by inserting a glowing splint into the gas jar, and the splint relights. Which gas has been collected at the anode? A. Hydrogen B. Carbon dioxide C. Oxygen D. Chlorine
Answer: C. Oxygen Electrolysis of dilute sulfuric acid produces oxygen at the anode (positive electrode) and hydrogen at the cathode (negative electrode). The test for oxygen is to insert a glowing splint into the gas; if the gas is oxygen, the splint relights. The gas collected at the anode relights a glowing splint, which matches the oxygen test exactly. So the gas is oxygen, which is option C.
Atomic structure and the Periodic Table
- 1
An atom has the electron configuration 2,8,7. What is its atomic number? A. 15 B. 17 C. 16 D. 18
Answer: B. 17 The atomic number equals the total number of electrons in a neutral atom, which is the sum of the numbers in its electron configuration. Adding the shells: 2 + 8 + 7 = 17. So this atom has atomic number 17, which is option B.
- 2
An ion M2+ has the electron configuration 2,8,8. What is the atomic number of element M? A. 18 B. 16 C. 22 D. 20
Answer: D. 20 The configuration 2,8,8 sums to 2 + 8 + 8 = 18 electrons in the ion. Forming a 2+ ion means the atom lost 2 electrons, so the neutral atom had 18 + 2 = 20 electrons. A neutral atom's electron count equals its atomic number, so M has atomic number 20. So the atomic number of M is 20, which is option D.
- 3
Using IUPAC numbering, in which Group of the Periodic Table are the halogens found? A. Group 18 B. Group 17 C. Group 1 D. Group 2
Answer: B. Group 17 Using IUPAC numbering, the columns of the Periodic Table are numbered 1 to 18 from left to right. Group 1 holds the alkali metals and Group 2 the alkaline earth metals; Group 18, on the far right, holds the noble gases. The halogens sit in the second column from the right, which is Group 17. So the halogens are in Group 17, which is option B.
- 4
Which of the following is the correct electron configuration for potassium (atomic number 19)? A. 2,8,9 B. 2,9,8 C. 2,8,8,1 D. 3,8,8
Answer: C. 2,8,8,1 The first shell holds a maximum of 2 electrons and the second a maximum of 8; for potassium and calcium among the first 20 elements, the third shell also holds only 8 before a new (fourth) shell begins, rather than continuing to its full theoretical capacity. Potassium has atomic number 19, so 19 electrons must be placed: 2 in the first shell, 8 in the second, 8 in the third (2 + 8 + 8 = 18), leaving 1 electron for a new fourth shell. So potassium's electron configuration is 2,8,8,1, which is option C.
Bonding, structure and the groups
- 1
Aluminium forms Al3+ ions and oxygen forms O2- ions. What is the correct formula for aluminium oxide? A. AlO B. Al3O2 C. Al2O3 D. AlO3
Answer: C. Al2O3 Aluminium ions carry a charge of 3+ and oxide ions carry a charge of 2-, so the compound's overall charge must balance to zero. Using the criss-cross method, the subscript for aluminium comes from the size of the oxide ion's charge (2), and the subscript for oxide comes from the size of the aluminium ion's charge (3). This gives Al2O3, which has a total positive charge of 2 x 3+ = 6+ and a total negative charge of 3 x 2- = 6-, so the charges balance exactly. The correct formula is therefore Al2O3, so the answer is C.
- 2
Ammonium ions carry a 1+ charge, and the phosphate ion has the formula PO4 with a 3- charge. What is the correct formula for ammonium phosphate, formed when these two ions combine? A. NH4PO4 B. (NH4)3PO4 C. NH4(PO4)3 D. NH12PO4
Answer: B. (NH4)3PO4 Ammonium is NH4+, a charge of 1+, and phosphate is PO4 with a charge of 3-. To balance the overall charge to zero, the criss-cross method gives each ion a subscript equal to the size of the OTHER ion's charge: ammonium gets the subscript 3 (from phosphate's charge of 3), and phosphate gets the subscript 1, which is not written. This gives (NH4)3PO4, with total charge 3 x 1+ = 3+ from the ammonium balancing 1 x 3- = 3- from the phosphate; the brackets around NH4 are essential, since without them the 3 would appear to apply only to the hydrogen atoms already inside the ion. The correct formula is therefore (NH4)3PO4, so the answer is B.
- 3
Calcium ions, Ca2+ (charge 2+), react with hydroxide ions, OH (charge 1-), to form calcium hydroxide. What is the correct formula for calcium hydroxide? A. CaOH, one calcium atom, one oxygen atom and one hydrogen atom B. CaOH2, one calcium atom, one oxygen atom and two hydrogen atoms C. Ca(OH)2, one calcium ion and two complete hydroxide ions D. Ca2OH, two calcium atoms, one oxygen atom and one hydrogen atom
Answer: C. Ca(OH)2, one calcium ion and two complete hydroxide ions Calcium ions carry a charge of 2+ and hydroxide ions carry a charge of 1-, so more hydroxide ions than calcium ions are needed to balance the overall charge to zero. Using the criss-cross method, the subscript for calcium comes from the size of hydroxide's charge (1), and the subscript for hydroxide comes from the size of calcium's charge (2). This gives one calcium ion for every two hydroxide ions; because hydroxide is itself a group of two atoms (O and H), brackets are needed around OH before writing the subscript 2, to show the whole ion is doubled. The correct formula is therefore Ca(OH)2, so the answer is C.
- 4
Iron(III) sulfate is formed from Fe3+ ions and sulfate ions (SO4, each carrying a charge of 2-). The Roman numeral (III) shows that the iron ion here carries a charge of 3+. What is the correct formula for iron(III) sulfate? A. Fe2(SO4)3, two iron ions for every three sulfate ions B. FeSO4, one iron ion for every one sulfate ion C. Fe3(SO4)2, three iron ions for every two sulfate ions D. Fe2SO4, two iron ions for every one sulfate ion
Answer: A. Fe2(SO4)3, two iron ions for every three sulfate ions The Roman numeral (III) tells us the iron ion here is Fe3+, carrying a charge of 3+, and the sulfate ion, SO4, carries a charge of 2-. Using the criss-cross method, the subscript for iron comes from the size of the sulfate ion's charge (2), and the subscript for sulfate comes from the size of the iron ion's charge (3). This gives 2 iron ions for every 3 sulfate ions: a total positive charge of 2 x 3+ = 6+ balances a total negative charge of 3 x 2- = 6-, and the sulfate group must be shown in brackets since more than one is needed. The correct formula is therefore Fe2(SO4)3, so the answer is A.
Electrochemistry and organic chemistry
- 1
When ethanol, C2H5OH, reacts completely with excess sodium metal, hydrogen gas is released. If 0.4 mol of ethanol reacts completely, how many moles of hydrogen gas, H2, are produced? A. 0.2 mol B. 0.4 mol C. 0.8 mol D. 0.1 mol
Answer: A. 0.2 mol The balanced equation for the reaction between ethanol and sodium is 2C2H5OH + 2Na -> 2C2H5ONa + H2, showing that 2 mol of ethanol reacts with 2 mol of sodium to release 1 mol of hydrogen gas. So the mole ratio of ethanol to hydrogen gas is 2 to 1. 0.4 mol of ethanol therefore produces 0.4 divided by 2, which is 0.2 mol, of hydrogen gas.
- 2
In the electrolysis of concentrated aqueous sodium chloride, chlorine gas is produced at the anode. Which half-equation correctly represents this process? A. 2Cl- + 2e- -> Cl2 B. Cl- -> Cl2 + e- C. Cl2 + 2e- -> 2Cl- D. 2Cl- -> Cl2 + 2e-
Answer: D. 2Cl- -> Cl2 + 2e- At the anode, chloride ions lose electrons and are oxidised to chlorine gas. Each chlorine atom in Cl2 comes from one Cl- ion, so two Cl- ions are needed to form one Cl2 molecule, and each Cl- ion loses one electron, so two electrons are released in total. The electrons must appear on the product side of the equation, since the ions are losing them (oxidation), not gaining them. So the correctly balanced half-equation is 2Cl- -> Cl2 + 2e-, matching option D.
- 3
Propane, C3H8, is a member of the alkane homologous series. Which equation correctly represents the complete combustion of propane? A. C3H8 + 5O2 -> 3CO + 4H2O B. C3H8 + 3O2 -> 3CO2 + 4H2O C. C3H8 + 5O2 -> 3CO2 + 4H2O D. C3H8 + 5O2 -> 3CO2 + 4H2
Answer: C. C3H8 + 5O2 -> 3CO2 + 4H2O Propane, C3H8, is an alkane, and alkanes are a homologous series with general formula CnH2n+2; for propane n = 3, giving C3H8. Complete combustion of a hydrocarbon in plentiful oxygen converts all the carbon in it to carbon dioxide and all the hydrogen to water. Balancing atom by atom: 3 carbon atoms need 3CO2, and 8 hydrogen atoms need 4H2O; the right-hand side then has (3 x 2) + (4 x 1) = 10 oxygen atoms in total, which needs 5O2 on the left. So the balanced equation is C3H8 + 5O2 -> 3CO2 + 4H2O, matching option C.
- 4
But-1-ene, CH2=CHCH2CH3, reacts with hydrogen bromide gas in an addition reaction. Which equation correctly represents this reaction and its product? A. C4H8 + 2HBr -> C4H10Br2 B. C4H8 + HBr -> C4H7Br + H2 C. C4H8 + HBr -> C4H9Br D. C4H8 + HBr -> C4H7Br + H2O
Answer: C. C4H8 + HBr -> C4H9Br But-1-ene is an unsaturated hydrocarbon containing one C=C double bond; alkenes undergo addition reactions in which a small molecule adds across the double bond. In addition, the double bond becomes a single bond and the two atoms of the added molecule, here H and Br, each bond to one of the two carbon atoms that were double-bonded. Every atom in the reactants ends up in the single product, so C4H8 + HBr -> C4H9Br, giving bromobutane, with no other product formed.
Quantitative chemistry and redox
- 1
Calculate the percentage by mass of magnesium in magnesium oxide, MgO. Use Ar: Mg = 24, O = 16. A. 60% B. 40% C. 66.7% D. 24%
Answer: A. 60% The relative molar mass of magnesium oxide is Mr(MgO) = Ar(Mg) + Ar(O) = 24 + 16 = 40. Percentage composition by mass of an element = (Ar of that element / Mr of the compound) x 100. For magnesium: (24 / 40) x 100 = 60%. So magnesium makes up 60% of the mass of magnesium oxide, option A.
- 2
Using Ar: Na = 23, Cl = 35.5, how many moles of sodium chloride are there in 117 g of the pure solid? A. 0.5 mol B. 2 mol C. 20 mol D. 6844.5 mol
Answer: B. 2 mol Find the relative molar mass of sodium chloride: Mr(NaCl) = Ar(Na) + Ar(Cl) = 23 + 35.5 = 58.5. The number of moles in a given mass is found using moles = mass (g) / Mr, so moles = 117 / 58.5. 117 / 58.5 = 2, since 58.5 x 2 = 117. So 117 g of sodium chloride is 2 mol, and this amount contains 2 times Avogadro's number of formula units of NaCl, since one mole of any substance always contains Avogadro's number of particles. The answer is B.
- 3
A reaction is predicted to produce 12.5 g of a product. In practice, 10.0 g is actually obtained. What is the percentage yield? A. 125% B. 20% C. 80% D. 2.5%
Answer: C. 80% Percentage yield = (actual yield / predicted yield) x 100. Here, actual yield = 10.0 g and predicted yield = 12.5 g. 10.0 / 12.5 = 0.8, since 12.5 x 0.8 = 10.0. 0.8 x 100 = 80%, so the percentage yield is 80%, option C.
- 4
A compound of iron and oxygen contains 70% iron and 30% oxygen by mass. Using Ar: Fe = 56, O = 16, what is its empirical formula? A. FeO B. FeO2 C. Fe7O3 D. Fe2O3
Answer: D. Fe2O3 Convert each mass percentage to moles by dividing by the relevant Ar: moles Fe = 70 / 56 = 1.25 mol, and moles O = 30 / 16 = 1.875 mol. Divide both mole values by the smaller one (1.25) to find the simplest ratio: Fe : O = 1.25/1.25 : 1.875/1.25 = 1 : 1.5. A ratio of 1 : 1.5 is not yet in whole numbers, so multiply both parts by 2 to clear the fraction: 2 : 3. This gives the empirical formula Fe2O3, option D. (If a relative molecular mass were also given, the same method extends to a molecular formula: divide the given Mr by the empirical formula's own mass to find how many times the empirical formula's ratio repeats.)
Algebra
- 1
Simplify fully: (x^3)^-2 x x^7. A. x B. x^13 C. x^8 D. 1/x^13
Answer: A. x Apply the power of a power rule to the bracket: (x^3)^-2 = x^(3 x -2) = x^-6. Multiply by x^7 using the rule x^a x x^b = x^(a+b): x^-6 x x^7 = x^(-6+7) = x^1. So (x^3)^-2 x x^7 simplifies to x, option A.
- 2
Simplify fully: (2x^3)^2 / x^4. A. 2x^2 B. 4x^2 C. x^2 D. 4x^10
Answer: B. 4x^2 Square everything inside the bracket: (2x^3)^2 = 2^2 x^(3 x 2) = 4x^6. Divide by x^4 using the index law x^a / x^b = x^(a-b): 4x^6 / x^4 = 4x^(6-4) = 4x^2. So (2x^3)^2 / x^4 simplifies to 4x^2, option B.
- 3
Simplify fully: 5(2x - 3) + 4x. A. 30x - 15 B. 14x + 15 C. 14x - 15 D. 14x - 3
Answer: C. 14x - 15 Distribute the 5 across both terms in the bracket: 5(2x - 3) = 5 x 2x - 5 x 3 = 10x - 15. Add the remaining 4x term: 10x - 15 + 4x = 14x - 15. So 5(2x - 3) + 4x simplifies to 14x - 15, which is option C.
- 4
Given that y = 3x^2 - 2x + 1, find the value of y when x = -2. A. 9 B. 41 C. -7 D. 17
Answer: D. 17 Substitute x = -2 into each term of y = 3x^2 - 2x + 1 separately. First term: 3x^2 = 3 x (-2)^2 = 3 x 4 = 12. Second term: -2x = -2 x (-2) = 4. Add all three terms with the +1: 12 + 4 + 1 = 17, so y = 17, option D.
Geometry and measures
- 1
Points A(1, 2) and B(7, 10) lie on a coordinate grid. Find the distance AB. A. 14 B. 100 C. 8 D. 10
Answer: D. 10 The distance between two points (x1, y1) and (x2, y2) is sqrt((x2 - x1)^2 + (y2 - y1)^2), by Pythagoras' theorem. Here the horizontal difference is 7 - 1 = 6 and the vertical difference is 10 - 2 = 8. So the distance is sqrt(6^2 + 8^2) = sqrt(36 + 64) = sqrt(100) = 10.
- 2
A regular polygon has an exterior angle of 20 degrees. Find the number of sides of the polygon. A. 18 B. 9 C. 20 D. 160
Answer: A. 18 The exterior angles of any convex polygon always add up to 360 degrees, whatever the number of sides. For a REGULAR polygon every exterior angle is equal, so the number of sides is n = 360 / (exterior angle). Here the exterior angle is 20 degrees, so n = 360 / 20 = 18 sides.
- 3
Two similar cones have volumes in the ratio 27:8. Find the ratio of their surface areas. A. 27:8 B. 3:2 C. 729:64 D. 9:4
Answer: D. 9:4 For similar solids, volume scales with the CUBE of the linear scale factor, so the linear scale factor is the cube root of the volume ratio: cube root of 27/8 = 3/2. Surface area scales with the SQUARE of the linear scale factor, so the area ratio is (3/2)^2 = 9/4. The ratio of surface areas is therefore 9:4.
- 4
A rhombus has diagonals of length 16 cm and 30 cm. Find the side length of the rhombus. A. 34 cm B. 17 cm C. 23 cm D. 289 cm
Answer: B. 17 cm The diagonals of a rhombus bisect each other at right angles, splitting it into four congruent right-angled triangles. Half of each diagonal gives the two legs of one such triangle: 16 / 2 = 8 cm and 30 / 2 = 15 cm. By Pythagoras' theorem, side^2 = 8^2 + 15^2 = 64 + 225 = 289, so the side length is sqrt(289) = 17 cm.
Number, units and measures
- 1
Write 5/8 as a percentage. A. 0.625% B. 160% C. 62.5% D. 58%
Answer: C. 62.5% To convert a fraction to a percentage, first write it as a decimal: 5/8 = 0.625 (8 goes into 50 six times remainder 2, into 20 twice remainder 4, into 40 five times exactly). Multiply the decimal by 100 to express it as a percentage: 0.625 x 100 = 62.5. So 5/8 = 62.5%. The answer is C.
- 2
Work out (5 - 8)^2 - 4 x sqrt(9) + 6. A. -15 B. 9 C. -12 D. 3
Answer: D. 3 Work out the bracket first: 5 - 8 = -3. Apply the power: (-3)^2 = 9, since a negative number squared is positive. The root: sqrt(9) = 3. Multiply: 4 x 3 = 12. Work left to right: 9 - 12 + 6 = -3 + 6 = 3, so the answer is D.
- 3
Work out 20 - 3 x (4 - 1)^2 + sqrt(16). A. 157 B. -3 C. -11 D. 6
Answer: B. -3 Work out the bracket first: 4 - 1 = 3. Apply the power: 3^2 = 9. Then the multiplication: 3 x 9 = 27. The square root: sqrt(16) = 4. The expression is now 20 - 27 + 4, worked left to right since addition and subtraction have equal priority: 20 - 27 = -7, then -7 + 4 = -3. So the answer is B.
- 4
Which of the following is NOT equivalent to 0.35? A. 27/80 B. 35% C. 7/20 D. 350/1000
Answer: A. 27/80 0.35 as a percentage: 0.35 x 100 = 35%, so 35% is equivalent. 0.35 as a fraction: 35/100, which simplifies (dividing by 5) to 7/20, so 7/20 is equivalent. Also, 350/1000 = 0.35 directly, so that is equivalent too. 27/80: dividing 27 by 80 gives 0.3375, which does not equal 0.35. So 27/80 is the one that is NOT equivalent, and the answer is A.
Ratio, proportion and rates of change
- 1
Write the ratio 56 : 42 : 70 in its simplest form. A. 28 : 21 : 35 B. 4 : 3 : 5 C. 5 : 3 : 4 D. 8 : 6 : 10
Answer: B. 4 : 3 : 5 Write each term as a product of primes: 56 = 2^3 x 7, 42 = 2 x 3 x 7, 70 = 2 x 5 x 7. The factors common to all three terms are 2 and 7, so the highest common factor is 2 x 7 = 14. Divide every term by 14: 56/14 = 4, 42/14 = 3, 70/14 = 5. The ratio in its simplest form, keeping the original order, is 4 : 3 : 5, so the answer is B.
- 2
A line has equation 4y = 3x + 12. A point (x, y) on this line satisfies x : y = 4 : 5. What is the value of x? A. 60 B. 6 C. -6 D. 0
Answer: B. 6 x : y = 4 : 5 means y = (5/4)x. Substituting into 4y = 3x + 12 gives 4 x (5/4)x = 3x + 12, which simplifies to 5x = 3x + 12. So 2x = 12, and x = 6. The answer is B.
- 3
A sequence is defined by the iterative rule a_(n+1) = 0.5 x a_n + 6, with a_1 = 4. What is the value of a_3? A. 8 B. 11 C. 5.5 D. 10
Answer: D. 10 Apply the rule once: a_2 = 0.5 x 4 + 6 = 2 + 6 = 8. Apply the rule again: a_3 = 0.5 x 8 + 6 = 4 + 6 = 10. The answer is D.
- 4
The ratio of the length to the width of a flag is 5 : 3. Write this ratio in the form n : 1. A. 3/5 : 1 B. 5/3 : 1 C. 8/3 : 1 D. 5/8 : 1
Answer: B. 5/3 : 1 To write a ratio in the form n : 1, divide both terms by the second term. Here that means dividing both 5 and 3 by 3: 5/3 : 3/3, which simplifies to 5/3 : 1. The answer is B.
Statistics and probability
- 1
A fair six-sided dice is rolled 150 times. How many times would you expect the dice to show a number greater than 4? A. 25 B. 100 C. 75 D. 50
Answer: D. 50 On a fair dice, the numbers greater than 4 are 5 and 6, which is 2 out of the 6 equally likely outcomes. The probability of rolling a number greater than 4 is therefore 2/6, which simplifies to 1/3. The expected number of successes in 150 rolls is 150 x 1/3. 150 x 1/3 = 50. So you would expect a number greater than 4 about 50 times.
- 2
The table shows the number of pets owned by each of 20 pupils. Number of pets: 0, 1, 2, 3. Frequency: 6, 5, 7, 2. Work out the mean number of pets per pupil. A. 2 B. 1.5 C. 6.25 D. 1.25
Answer: D. 1.25 The mean of grouped data is found from sum(frequency x value) divided by the total frequency. Multiplying each value by its frequency: 0 x 6 = 0, 1 x 5 = 5, 2 x 7 = 14, 3 x 2 = 6. Adding these gives 0 + 5 + 14 + 6 = 25. The total number of pupils is 6 + 5 + 7 + 2 = 20. The mean is 25 / 20 = 1.25 pets per pupil.
- 3
A spinner is spun 80 times, and it lands on red 24 times. Based on this experiment, estimate the probability that the spinner lands on red on the next spin. A. 10/3 B. 3/10 C. 3/7 D. 7/10
Answer: B. 3/10 An estimated probability from an experiment is the relative frequency: the number of successes divided by the total number of trials. Here, red occurred on 24 of the 80 spins, so the relative frequency is 24/80. Dividing both numbers by 8 gives 24/80 = 3/10. So the estimated probability of landing on red is 3/10.
- 4
In a class of 40 students, 22 study French, 17 study Spanish, and 9 study both French and Spanish. Using a Venn diagram, work out how many students study NEITHER French nor Spanish. A. 1 B. 19 C. 13 D. 10
Answer: D. 10 The number of students who study French only is 22-9 = 13 (the 9 who study both are subtracted so they are not double-counted). The number who study Spanish only is 17-9 = 8. The number who study at least one of the two subjects is the sum of French only, Spanish only, and both: 13+8+9 = 30. The number who study neither subject is the class size minus this total: 40-30 = 10. So 10 students study neither French nor Spanish.
Algebra, functions and sequences
- 1
Simplify (27x^6)^(1/3) fully. A. 3x^2 B. 3x^18 C. 9x^2 D. 9x^6
Answer: A. 3x^2 The power 1/3 applies to every factor inside the brackets, so (27x^6)^(1/3) = 27^(1/3) x (x^6)^(1/3). 27^(1/3) is the number that cubes to give 27, which is 3, since 3^3 = 27. For the x term, use the law (x^m)^n = x^(mn): (x^6)^(1/3) = x^(6 x 1/3) = x^2. Combining both parts gives 3x^2, so the answer is A.
- 2
For all real values of x, sqrt(x^2) is equal to: A. x B. |x| C. x^2 D. -x
Answer: B. |x| The symbol sqrt always denotes the non-negative square root of a number. If x is positive, sqrt(x^2) = x, which is already non-negative, so this matches |x|. If x is negative, for example x = -3, then sqrt(x^2) = sqrt(9) = 3, which is the positive value -x, and this also matches |x|. Since sqrt(x^2) gives x when x >= 0 and -x when x < 0, it is equal to |x| for every real x, so the answer is B.
- 3
Find the sum of the first 40 positive integers. A. 780 B. 800 C. 820 D. 1640
Answer: C. 820 The sum of the first n natural numbers is given by the formula n(n + 1)/2. Here n = 40, so the sum is 40 x 41/2. 40 x 41 = 1640, and 1640/2 = 820. So the sum of the first 40 positive integers is 820, and the answer is C.
- 4
Solve the inequality 7 - 3x >= 1. A. x <= -8/3 B. x >= 2 C. x <= -2 D. x <= 2
Answer: D. x <= 2 Rearrange 7 - 3x >= 1 by subtracting 7 from both sides: -3x >= 1 - 7, which gives -3x >= -6. Divide both sides by -3. Since -3 is negative, the inequality sign must reverse. This gives x <= (-6)/(-3) = 2. So the answer is D, x <= 2.
Differentiation and integration
- 1
Let f(x) = sqrt(x) (x - 6) for x > 0. Find f'(9). A. 5/2 B. 1/2 C. 7/2 D. -3/2
Answer: C. 7/2 Expand f(x) = sqrt(x)(x-6) as a sum of powers of x before differentiating: f(x) = x^(1/2)(x-6) = x^(3/2) - 6x^(1/2). Differentiate term by term: d/dx(x^(3/2)) = (3/2)x^(1/2), and d/dx(-6x^(1/2)) = -6 x (1/2) x^(-1/2) = -3x^(-1/2). So f'(x) = (3/2)x^(1/2) - 3x^(-1/2). At x = 9: x^(1/2) = 3 and x^(-1/2) = 1/3, so f'(9) = (3/2)(3) - 3(1/3) = 4.5 - 1 = 3.5. So the answer is C, 7/2.
- 2
Given that y = x^4 - 3x^2, find the value of d2y/dx2 when x = 2. A. 42 B. 20 C. 54 D. 36
Answer: A. 42 Differentiate y = x^4 - 3x^2 to find the first derivative: dy/dx = 4x^3 - 6x. Differentiate again to find the second derivative: d2y/dx2 = 12x^2 - 6. Substitute x=2: d2y/dx2 = 12(2)^2 - 6 = 12(4) - 6 = 48 - 6 = 42. So the answer is A.
- 3
Evaluate the definite integral of (4x - 3x^2) dx from x = 1 to x = 2. A. -1 B. 1 C. 0 D. -15
Answer: A. -1 Find the antiderivative: integral of (4x - 3x^2) dx = 2x^2 - x^3 (the constant of integration cancels in a definite integral). Evaluate at the upper limit: F(2) = 2(4) - 8 = 8 - 8 = 0. Evaluate at the lower limit: F(1) = 2(1) - 1 = 2 - 1 = 1. Subtract: the definite integral is F(2) - F(1) = 0 - 1 = -1, so the answer is A.
- 4
Evaluate the definite integral of (3x^2 - 2x) dx from x = 2 to x = 3. A. 14 B. -14 C. 52 D. 18
Answer: A. 14 Find the antiderivative: integral of (3x^2 - 2x) dx = x^3 - x^2 (the constant of integration cancels in a definite integral). Evaluate at the upper limit: F(3) = 3^3 - 3^2 = 27 - 9 = 18. Evaluate at the lower limit: F(2) = 2^3 - 2^2 = 8 - 4 = 4. Subtract: the definite integral is F(3) - F(2) = 18 - 4 = 14, so the answer is A.
Coordinate geometry and trigonometry
- 1
Find the exact value of 2 sin(60 degrees) cos(30 degrees). A. sqrt(3)/2 B. 3/4 C. 3/2 D. 1
Answer: C. 3/2 Use the exact values sin(60) = sqrt(3)/2 and cos(30) = sqrt(3)/2. Substitute: 2 sin(60) cos(30) = 2 x (sqrt(3)/2) x (sqrt(3)/2). Multiply the surds first: (sqrt(3)/2) x (sqrt(3)/2) = 3/4, so the expression becomes 2 x (3/4) = 3/2, option C.
- 2
Find the exact value of tan(60 degrees) - tan(30 degrees). A. 0 B. 2sqrt(3)/3 C. 4sqrt(3)/3 D. -2sqrt(3)/3
Answer: B. 2sqrt(3)/3 Use the exact values tan(60) = sqrt(3) and tan(30) = 1/sqrt(3) = sqrt(3)/3. Subtract: sqrt(3) - sqrt(3)/3 = (3sqrt(3) - sqrt(3))/3 = 2sqrt(3)/3, option B.
- 3
A circle has equation x^2 + y^2 - 6x + 4y - 3 = 0. Find the radius of the circle. A. 16 B. sqrt(3) C. sqrt(10) D. 4
Answer: D. 4 Compare x^2 + y^2 - 6x + 4y - 3 = 0 with the general form x^2 + y^2 + cx + dy + e = 0: here c = -6, d = 4, e = -3. Complete the square: x^2 - 6x = (x - 3)^2 - 9, and y^2 + 4y = (y + 2)^2 - 4. Substitute back: (x - 3)^2 - 9 + (y + 2)^2 - 4 - 3 = 0, so (x - 3)^2 + (y + 2)^2 = 16. This matches (x - a)^2 + (y - b)^2 = r^2 with r^2 = 16, so the radius r = sqrt(16) = 4, option D.
- 4
The lines kx - 4y + 1 = 0 and 3x + 6y - 2 = 0 are perpendicular. Find the value of k. A. k = -2 B. k = 8 C. k = 2 D. k = -8
Answer: B. k = 8 Rearrange 3x + 6y - 2 = 0 into gradient form: 6y = -3x + 2, so y = -(1/2)x + 1/3, giving gradient -1/2. Rearrange kx - 4y + 1 = 0 into gradient form: -4y = -kx - 1, so y = (k/4)x + 1/4, giving gradient k/4. For perpendicular lines, the product of the gradients equals -1: (k/4)(-1/2) = -1, so -k/8 = -1, giving k = 8, option B.
Exponentials and logarithms
- 1
Solve for x: 5^x = 125. A. 4 B. 25 C. 5 D. 3
Answer: D. 3 5^x = 125 asks: to what power must 5 be raised to give 125? 5^1 = 5, 5^2 = 25, 5^3 = 125. So 125 = 5^3, meaning x = 3, option D.
- 2
Solve for x: 5^(2x) = 125. A. 3 B. 6 C. 3/2 D. 1
Answer: C. 3/2 Write 125 as a power of 5: 125 = 5 x 5 x 5 = 5^3. So 5^(2x) = 5^3 has matching bases, which means the exponents must be equal: 2x = 3. Divide both sides by 2 to isolate x: x = 3/2, option C.
- 3
Solve for x: 4^x = 8^(x - 1). A. -3 B. 3 C. 2 D. 1
Answer: B. 3 Rewrite both sides with base 2: 4 = 2^2 and 8 = 2^3, so 4^x = 2^(2x) and 8^(x - 1) = 2^(3(x - 1)) = 2^(3x - 3). Since the bases now match, the exponents must be equal: 2x = 3x - 3. Rearrange: 2x - 3x = -3, so -x = -3, giving x = 3, option B.
- 4
Simplify log_6(6) + log_6(36). A. 3 B. 2 C. 1 D. 216
Answer: A. 3 log_6(6) = 1, using the rule log_a(a) = 1. 36 = 6^2, so log_6(36) = 2. Add the two results: log_6(6) + log_6(36) = 1 + 2 = 3, option A.
Graphs of functions
- 1
Given f(x) = x^2 and g(x) = x - 3, evaluate f(g(5)). A. 22 B. 25 C. 2 D. 4
Answer: D. 4 f(g(x)) means: first apply g to x, then apply f to the result. Working from the inside out, first evaluate g(5). g(5) = 5 - 3 = 2. Now apply f to this result: f(2) = 2^2 = 4. So f(g(5)) = 4, option D.
- 2
How many real roots does the equation x^3 - 4x = 0 have? A. 3 B. 1 C. 2 D. 0
Answer: A. 3 Factorise x^3 - 4x by taking out the common factor x: x^3 - 4x = x(x^2 - 4). The bracket is a difference of two squares: x^2 - 4 = (x - 2)(x + 2), so the equation is x(x - 2)(x + 2) = 0. Setting each factor to zero gives three solutions: x = 0, x = 2 and x = -2. So the equation x^3 - 4x = 0 has 3 real roots, option A.
- 3
Given f(x) = sqrt(x) and g(x) = x + 5, evaluate g(f(4)). A. 3 B. 2 C. 7 D. 9
Answer: C. 7 g(f(4)) means: first apply f to 4, then apply g to the result. Working from the inside out, first evaluate f(4). f(4) = sqrt(4) = 2. Now apply g to this result: g(2) = 2 + 5 = 7. So g(f(4)) = 7, option C.
- 4
Find the y-intercept of the curve y = (x - 2)(x + 5)(x - 1). A. -10 B. -2 C. 2 D. 10
Answer: D. 10 The y-intercept of a curve is its value when x = 0, so substitute x = 0 into y = (x - 2)(x + 5)(x - 1). y = (0 - 2)(0 + 5)(0 - 1) = (-2)(5)(-1). (-2) x 5 = -10, and -10 x (-1) = 10. So the y-intercept is 10, option D.
Electricity and magnetism
- 1
A charge of 12 coulombs flows past a point in a wire in 4 seconds. What is the current in the wire? A. 0.33 A B. 8 A C. 48 A D. 3 A
Answer: D. 3 A The relationship between current, charge and time is I = Q/t. Substituting the given values gives I = 12/4. 12 divided by 4 is 3, so the current is 3 A. Therefore the answer is D.
- 2
A current of 5 A flows through a wire for 3 minutes. What charge flows past a point in the wire during this time? A. 15 C B. 36 C C. 900 C D. 1500 C
Answer: C. 900 C The relationship between charge, current and time is Q = I x t, and t must be in seconds. 3 minutes = 3 x 60 = 180 seconds. Q = 5 x 180 = 900 C. Therefore the answer is C.
- 3
A 6 ohm resistor and a 3 ohm resistor are connected in parallel with one another. What is their combined resistance? A. 9 ohms B. 0.5 ohms C. 2 ohms D. 18 ohms
Answer: C. 2 ohms For two resistors in parallel, 1/R = 1/R1 + 1/R2. Substituting the values, 1/R = 1/6 + 1/3 = 1/6 + 2/6 = 3/6 = 1/2. Taking the reciprocal, R = 1/(1/2) = 2 ohms. Therefore the answer is C.
- 4
A device operates at a potential difference of 5 V and draws a current of 2 A. How much energy is transferred by the device in 10 seconds? A. 17 J B. 20 J C. 50 J D. 100 J
Answer: D. 100 J The energy transferred by a device is given by E = VIt, using potential difference, current and time together. Substituting the given values gives E = 5 x 2 x 10. 5 x 2 = 10, and 10 x 10 = 100, so the energy transferred is 100 J. Therefore the answer is D.
Mechanics
- 1
An astronaut has a mass of 80 kg. Using g = 10 N/kg on Earth, what is her weight on Earth's surface? A. 8 N B. 800 N C. 90 N D. 80 kg
Answer: B. 800 N Weight is the force of gravity acting on an object's mass, calculated using w = mg, where m is the mass in kg and g is the gravitational field strength in N/kg. On Earth's surface, g is approximately 10 N/kg. Substituting the given mass: w = 80 kg x 10 N/kg = 800 N. The astronaut's weight on Earth's surface is 800 N, so the answer is B.
- 2
A car of mass 1200 kg travels at a velocity of 15 m/s. What is its momentum? A. 1215 kg m/s B. 80 kg m/s C. 18000 kg m/s D. 18 kg m/s
Answer: C. 18000 kg m/s Momentum is defined as the product of an object's mass and its velocity: p = mv. The car has a mass of 1200 kg and a velocity of 15 m/s. Substituting these values: p = 1200 kg x 15 m/s = 18000 kg m/s. The car's momentum is 18000 kg m/s, so the answer is C.
- 3
An electric heater transfers 9000 J of energy to a room over a time of 3 minutes. What is the power output of the heater? A. 50 W B. 3000 W C. 0.02 W D. 30 W
Answer: A. 50 W Power = energy transferred / time taken. Convert 3 minutes to seconds: 3 x 60 = 180 s. Power = 9000 J / 180 s = 50 W. The power output of the heater is 50 W, so the answer is A.
- 4
A resultant force of 24 N acts on an object of mass 6 kg, initially at rest. What is the object's acceleration? A. 144 m/s^2 B. 0.25 m/s^2 C. 18 m/s^2 D. 4 m/s^2
Answer: D. 4 m/s^2 Newton's second law states that the resultant force on an object equals its mass multiplied by its acceleration: F = ma. Rearranging this equation to find acceleration gives a = F/m. Substituting the given values: a = 24 N / 6 kg = 4 m/s^2. The object's acceleration is 4 m/s^2, so the answer is D.
Thermal physics and matter
- 1
A solid block has a mass of 750 g and a volume of 250 cm^3. What is its density? A. 0.33 g/cm^3 B. 3 g/cm^3 C. 187500 g/cm^3 D. 500 g/cm^3
Answer: B. 3 g/cm^3 Density is defined as density = mass / volume. Substituting mass = 750 g and volume = 250 cm^3 gives density = 750 / 250. 750 / 250 = 3 g/cm^3. Therefore the answer is B.
- 2
A sample of liquid has a mass of 0.048 kg and a volume of 40 cm^3. What is its density, in g/cm^3? A. 1.2 g/cm^3 B. 0.0012 g/cm^3 C. 0.12 g/cm^3 D. 48 g/cm^3
Answer: A. 1.2 g/cm^3 Density is defined as density = mass / volume, and the units here (g/cm^3) require the mass in grams, not kilograms. Converting the mass: 0.048 kg x 1000 = 48 g. Substituting mass = 48 g and volume = 40 cm^3 gives density = 48 / 40. 48 / 40 = 1.2 g/cm^3. Therefore the answer is A.
- 3
A box exerts a force of 240 N on the ground through its base, which has an area of 0.4 m^2. What pressure does the box exert on the ground? A. 240.4 Pa B. 96 Pa C. 600 Pa D. 1500 Pa
Answer: C. 600 Pa Pressure is defined as pressure = force / area. Substituting force = 240 N and area = 0.4 m^2 gives pressure = 240 / 0.4. 240 / 0.4 = 600 Pa. Therefore the answer is C.
- 4
A box exerts a force of 5000 N on the ground through its base, which measures 40 cm by 50 cm. What pressure, in Pa, does the box exert on the ground? A. 2.5 Pa B. 1000 Pa C. 25000 Pa D. 250 Pa
Answer: C. 25000 Pa Pressure is defined as pressure = force / area, and giving the answer in pascals requires the area in square metres. Converting both side lengths to metres: 40 cm = 0.4 m and 50 cm = 0.5 m, so the base has area = 0.4 x 0.5 = 0.2 m^2. Substituting force = 5000 N and area = 0.2 m^2 gives pressure = 5000 / 0.2. 5000 / 0.2 = 25000 Pa. Therefore the answer is C.
Waves and radioactivity
- 1
A wave has a period of 0.02 s and a wavelength of 3.4 m. What is its speed? A. 0.068 m/s B. 1.7 m/s C. 170 m/s D. 53.4 m/s
Answer: C. 170 m/s Frequency is the reciprocal of the period: frequency = 1 / period = 1 / 0.02 = 50 Hz. Wave speed is found using wave speed = frequency x wavelength. Substituting the values: wave speed = 50 Hz x 3.4 m = 170 m/s. The answer is C.
- 2
A wave source produces 15 complete oscillations in 3 seconds. What is the period of the wave? A. 5 s B. 3 s C. 0.6 s D. 0.2 s
Answer: D. 0.2 s Frequency is the number of complete oscillations per second: frequency = 15 oscillations / 3 s = 5 Hz. Period is the reciprocal of frequency: period = 1 / frequency. Substituting the frequency: period = 1 / 5 = 0.2 s. The answer is D.
- 3
A wave travels 340 m across the surface of a lake in 2.5 s. If the wave's period is 0.05 s, what is its wavelength? A. 17 m B. 6.8 m C. 2720 m D. 42.5 m
Answer: B. 6.8 m The wave's speed is distance / time = 340 m / 2.5 s = 136 m/s. The frequency is the reciprocal of the period: frequency = 1 / period = 1 / 0.05 s = 20 Hz. Wavelength = speed / frequency = 136 / 20 = 6.8 m. The answer is B.
- 4
A wave travelling across the surface of a pond has a wavelength of 2.5 m and a frequency of 4 Hz. What is the speed of the wave? A. 0.625 m/s B. 40 m/s C. 6.5 m/s D. 10 m/s
Answer: D. 10 m/s Wave speed is calculated using wave speed = frequency x wavelength. Substituting the given values: wave speed = 4 Hz x 2.5 m. 4 x 2.5 = 10, so the wave speed is 10 m/s. The answer is D.